Medical Education Department - Karnataka

34202561 supply of surgical and other items to the mysore medical college and research institute and its associated hospitals, mysuru , absorbent cotton roll 500gms net wt ip, sterile surgical gloves 6 1 / 2 inch, sterile surgical gloves 7 inch, sterile surgical gloves 7 1 / 2 inch, sterile surgical gloves 6 1 / 2 inch powder free, sterile surgical gloves 7 inch powder free, sterile surgical gloves 7 1 / 2 inch powder free, bandage cloth indivually packed 20mtrs length 1mtr width asper d&c act schedule f ii, disposable oxygen mask ( adult ) , disposable oxygen mask ( pediatric ) , disposable mouth masks ( triple layer ) , disposable cap, sterile hypodermic needle indivisually packed 26g, intensive spirometer, niv mask large, niv mask ( medium ) , non rebreathing mask ( nrbm ) paediatric, non rebreathing mask ( nrbm ) adult, nebulizer medicine chamber with mask adult, hand sanitize solution with handle 500ml, hand sanitizer solution 5ltr, black disinfectant fluid grade iii confirmaing to schedule o of the drugs act virgin 5ltrs, dichlorometaxylenol lotion ( antisol ) 1ltr, falcon tubes, uricol bottle, cotton crape bandage 10cm x 4 meter, cotton crape bandage 15cm x 4 meter, water bed, air bed, kehr t tube, colostomy bag permanent, colostomy flange, colostomy paste, colostomy powder, n95 mask iso ce certified, flatus tube, sterile disposable perfusion set with filter for single use only ( gamma radiated / eto sterilized standard as per schedule r1 of d & c act pouch pack, micro dripset sterile non toxic pyrogen free iso certified 1ml=60 drops ( d w ) , sterile disposable i v canula with injection port sizes 18, sterile disposable i v canula with injection port sizes , 20 g, sterile disposable i v canula with injection port sizes 26g, sterile non reusable disposable syringe with hypodermic needle 3ml, 23g, sterile non reusable disposable syringe with hypodermic needle 5ml, 24g, sterile non reusable disposable syringe with hypodermic needle 10ml, 24g, sterile non reusable disposable syringe with hypodermic needle 20ml, 23g, sterile non reusable disposable syringe with hypodermic needle 50ml, 23g, non ionic contrast 100ml, non ionic contrast 50ml, urograffin 76 percentage 20ml, epidural needle 18g, combined spinal epidural needle, epidural cathater set 18g ( lor syringe catheter and needle ) , spinal needle ( pencil point ) 27g, cvc catheters adult double lumen kit, cvc cathaters adult triple lumen kit, endotracheal tubes with out cuff pvc size 2.5 id with gradation of 0.5 mm strile, endotracheal tubes with cuff pvc size 2.5 id with gradation of 0.5 mm strile, endotracheal tubes with out cuff pvc size 3 id with gradation of 0.5 mm strile, endotracheal tubes with cuff pvc size 3 id with gradation of 0.5 mm strile, endotracheal tubes with out cuff pvc size 3.5 id with gradation of 0.5 mm strile, endotracheal tubes with cuff pvc size 3.5 id with gradation of 0.5 mm strile, endotracheal tubes with out cuff pvc size 4 id with gradation of 0.5 mm strile, endotracheal tubes with cuff pvc size 4 id with gradation of 0.5 mm strile, endotracheal tubes with out cuff pvc size 4.5 id with gradation of 0.5 mm strile, endotracheal tubes with cuff pvc size 4.5 id with gradation of 0.5 mm strile, endotracheal tubes with out cuff pvc size 5 id with gradation of 0.5 mm strile, endotracheal tubes with cuff pvc size 5 id with gradation of 0.5 mm strile, endotracheal tubes with out cuff pvc size 5.5 id with gradation of 0.5 mm strile, endotracheal tubes with cuff pvc size 5.5 id with gradation of 0.5 mm strile, sterile disposable i v canula with injection port sizes 22g, endotracheal tubes with cuff pvc.size 6 id with gradation of 0 .5 mm sterile, endotracheal tubes with cuff pvc.size 6.5 id with gradation of 0 .5 mm sterile, endotracheal tubes with cuff pvc.size 7 id with gradation of 0 .5 mm sterile, endotracheal tubes with cuff pvc.size 7.5 id with gradation of 0 .5 mm sterile, endotracheal tubes with cuff pvc.size 8 id with gradation of 0 .5 mm sterile, endotracheal tubes with cuff pvc.size 8.5 id with gradation of 0 .5 mm sterile, larangeal tube ( mlt ) size 5, larangeal tube ( mlt ) size 6, i gel, arterial line transfer set, digital weighing machine ( paediatric ) , digital weighing machine, ecg electrodes, ecg paper rools 6208, ecg paper long fold z fold, ecg jelly 250ml bottle, oropharyngeal air way 0, oropharyngeal air way 1, oropharyngeal air way 2, oropharyngeal air way 3, oropharyngeal air way 4, anotomical face mask 1, anotomical face mask 2, anotomical face mask 3, anotomical face mask 4, jackson rees circuit pediatric, jackson rees circuit adult, bains circuite, disposable ventilator tubing circuit compatible to hospital ventilators, b p blades for single use sterile individually packed .sizes 15, , b p blades for single use sterile individually packed .sizes, 11, , b p blades for single use sterile individually packed .sizes, 20, , b p blades for single use sterile individually packed .sizes, 21, b p blades for single use sterile individually packed .sizes, 23, b p blades for single use sterile individually packed .sizes, 24, urine collection bag with valve out let ( wall of the bag should be transparent to measure the volume ) 2000ml, pop rolls 10cmx2.7mtr ( good quality ) , pop rolls 15cmsx2.7mtr ( good quality ) , bone wax 2.5gm, waste disposable covers colour & logo as per pollution control act white, waste disposable covers colour & logo as per pollution control act black, waste disposable covers colour & logo as per pollution control act red, waste disposable covers colour & logo as per pollution control act yellow, waste disposable covers colour & logo as per pollution control act blue, sterile disposable i v canula with injection port sizes 24g, micro slides 50 in one box subject to approval from dept of pathalogy, cover slips subject to approval from dept of pathalogy, guidtel airways ( size 2.5, 3, 3.5, 4, 4.5 ) , hiv protection kit disposable, icd bag 16g to 24g, icd tubes ( thoracic drainage catheter ) , micro pore plaster 1inch, romovac suction set 10f, romovac suction set 12f, romovac suction set 14f, romovac suction set 16f, romovac suction set 18f, blood lancets sterile individually packed, ambu bag with mask with reservior ( 250ml ) , ambu bag with mask with reservior ( 500ml ) , ambu bag with mask with reservior ( 1000ml ) , ambu bag with mask with reservior ( 1500ml ) , stellate, scalpel no size 11, a v fistula needle 16 f, ijv cathater 11.5f, ijv cathater 10.f, iv dripstand ( stainless steel ) , plasmapheresis p2 filters, steinman pin with bohler stir rup, air leak protector, elastic adhesive plaster 4 inch, elastic adhesive plaster 6 inch, elastic adhesive bandage 4 inch / 6 inch, i v canula 2way 18g, disposable diapers small, disposable diapers medium, disposable diapers large, disposable bougie ( 15fr x 70cm adult ) , scalp vein set sterile size 20g, vaccum suction tip, disposable needle sterile 23g 11 / 2’’, suction catheter no. 5, suction catheter no. 6, suction catheter no. 7, suction catheter no. 8, suction catheter no. 10, suction cathater 14g, suction cathater 12g, suction cathater 18g, nerve stimulating needle ( 5cm and 10cm ) , sterile disposable needle 24g 1, iol holding forceps, conjuctival scissors, corneal scissors ( right and left ) , dialer ( iol dialer / sinskey hook ) , kelman mc pherson forceps, cresent blade, keratome blade. 2.8mm / 3.2mm, sideport blade 15 degree, superior rectus forceps, lacrimal dissector, colibri forceps, ball point themal cautery, iris repositor, air canula 27g, hydrodissection canula 27g, spring action ( barrauer’s type needle holder ) ( fine ) , spring action ( barrauer’s type needle holder ) rough, kelly’s pad for labour ward, kelly’s punch 1mm, hoskin’s forceps, corneal trephine ( various sizes 7.5 mm 8 mm 9.5 mm 9 mm ) , periosteal elevator, mucoperisteal elevator, ptosis clamps, desmarre’s lid tetractor, cat’s paw lacrimal wound retractor, evisceration scoop / curette, eye speculam ( wire ) , extraction forceps, artery haemostatic forceps, vanna’s scissors ( angled ) , punctum dialator, wire vectis, liquied hand soap, castroviejo callipers, suture tiers, capsular tension ring, scalp vein set sterile size 18, vaccutainer plain 5ml, adhesive plaster roll 10cm x 10mtr, band aid handy plaster, nettleshits punctum dialator, suture tying forceps ( bent ) , suture tying forceps ( curved ) , stainless steel try with rubber mats double, cannulas stainless steel 27g, 26g, 25g, disposable plastic apron, fine conjunctival scissors, phaco sleeves, liebermann phaco speculum, vp shunt tube, i v canula 2way 20g, blood bags 350ml ( single ) , blood bags 350ml ( double ) , blood bags 450ml ( double ) , blood bags 450ml ( triple ) , blood bags 450ml ( quadruple ) , 100ml empty ( single blood bag ) , microtips 200 microliters yellow colour ( 200microlitre , 100microlitre ) , microtips ( 0.5 10ml ) ( 96 tips per box ) 20 200 ml ( 96 tips per box ) 100 1000 ml ( 96 tips per box ) , edta tubes red ( vaccutainers ) , edta tubes blue ( vaccutainers ) , edta tubes 4ml ( purple ) , caurtery pencil for monopolar cautery universaly adoptable, cautery pad, cutting loops ( double stem ) 24fr ( tur ) , d j stents both end open length 26cm 6fr, d j stents both end open length 26cm 5.5fr, d j stents both end open length 26cm 5.0fr, d j stents both end open length 18cm 3.5fr, d j stents both end open length 20cm 4.0fr, facial dilators set teflon make ( for pcn ) each pack consisting of dilator size 6fr, facial dilators set teflon make ( for pcn ) each pack consisting of dilator size 8fr, facial dilators set teflon make ( for pcn ) each pack consisting of dilator size 10fr, facial dilators set teflon make ( for pcn ) each pack consisting of dilator size 12fr, facial dilators set teflon make ( for pcn ) each pack consisting of dilator size 14fr, facial dilators set teflon make ( for pcn ) each pack consisting of dilator size 16 fr, teflon blocks, foley s ballon catheter sterile single use size 8f, foley s ballon catheter sterile single use size 10f, foley s ballon catheter sterile single use size 12f, foley s ballon catheter sterile single use size 14f, foley s ballon catheter sterile single use size 16f, foley s ballon catheter sterile single use size 20f three way, foley s ballon catheter sterile single use size 22f three way, initial puncture needle 18f 20cm double part for pcnl 18g 6fr, suprapubic cathaer foley’s set 16fr consisiting of puncture needle & suprapubic fole’s cathater with urine bag, suprapubic cathaer foley’s set 10 fr consisiting ofmalecot cathater 1, mounted on needle with urine bag connector., suprapubic cathaer foley’s set 12 fr consisiting ofmalecot cathater 1, mounted on needle with urine bag connector., suprapubic cathaer foley’s set 14 fr consisiting ofmalecot cathater 1, mounted on needle with urine bag connector., toomey glass syringes 100ml, ureteric baloon dialator 5cm , 15f, burstpressure 20atm, ureteric cathater both end open 4fr, ureteric cathater both end open 5fr, ureteric cathater both end open 6fr, spinal needle quinke 25 g, spinal needle quinke 23g, spinal needle 23 g ( bd company ) , examination gloves, small ( 1 x 100 packs ) , examination gloves, medium ( 1 x 100 packs ) , examination gloves, large ( 1 x 100 packs ) , sterile non reusable disposable syringe with hypodermic needle 2ml, 24g, reinforced endotracheal tubes 8g, ryles tube sizes 5f, ryles tube sizes 6f, ryle’s tube no. 10f, ryle’s tube no. 12f, ryles tube sizes 23f, ryles tube sizes 14f, ryles tube sizes 16f, ryles tube sizes 18f, easy fix ( iv plaster ) , glass test tubes 5ml ( length 7.5cm width 1cm ) , suprapubic cathaer foley’s set 16 fr consisiting ofmalecot cathater 1, mounted on needle with urine bag connector., autoclavable silicon coated rubber sheet 90cm x 10 mtrs / per roll, curved scissors laproscopic 5mm, maryland desector laproscopic 5mm, babcock laproscopic 5mm, babcock laproscopic 10mm, grasper laproscopic 5mm, bone cutter, patella holding forceps, condyle holding forceps, a o bone holding large, taflan punch, plate holding forceps, bone lever large, cetellis bone punch ( small ) , bone levers small, t handle, smillis menisci knife, lion tooth bone holding, kerison up cutting forceps, kerison down cutting forceps, bone holding forceps ( small size ) , foldable lens ( hydrophilic acrylic ) 10 diopter, foldable lens ( hydrophilic acrylic ) 11 diopter, foldable lens ( hydrophilic acrylic ) 12 diopter, foldable lens ( hydrophilic acrylic ) 13 diopter, foldable lens ( hydrophilic acrylic ) 14 diopter, foldable lens ( hydrophilic acrylic ) 15 diopter, foldable lens ( hydrophilic acrylic ) 16 diopter, foldable lens ( hydrophilic acrylic ) 16.5 diopter, foldable lens ( hydrophilic acrylic ) 17 diopter, foldable lens ( hydrophilic acrylic ) 17.5 diopter, foldable lens ( hydrophilic acrylic ) 18 diopter, foldable lens ( hydrophilic acrylic ) 18.5 diopter, foldable lens ( hydrophilic acrylic ) 19 diopter, foldable lens ( hydrophilic acrylic ) 19.5 diopter, foldable lens ( hydrophilic acrylic ) 20 diopter, foldable lens ( hydrophilic acrylic ) 20.5 diopter, foldable lens ( hydrophilic acrylic ) 21 diopter, foldable lens ( hydrophilic acrylic ) 21.5 diopter, foldable lens ( hydrophilic acrylic ) 22 diopter, foldable lens ( hydrophilic acrylic ) 22.5 diopter, foldable lens ( hydrophilic acrylic ) 23 diopter, foldable lens ( hydrophilic acrylic ) 23.5 diopter, foldable lens ( hydrophilic acrylic ) 24 diopter, foldable lens ( hydrophilic acrylic ) 24.5 diopter, foldable lens ( hydrophilic acrylic ) 25 diopter, rigid pmma ( single piece ) pciol 10 dioptre, rigid pmma ( single piece ) pciol 11 dioptre, rigid pmma ( single piece ) pciol 12 dioptre, rigid pmma ( single piece ) pciol 13 dioptre, rigid pmma ( single piece ) pciol 14 dioptre, rigid pmma ( single piece ) pciol 15 dioptre, rigid pmma ( single piece ) pciol 16 dioptre, rigid pmma ( single piece ) pciol 16.5 dioptre, rigid pmma ( single piece ) pciol 17 dioptre, rigid pmma ( single piece ) pciol 17.5 dioptre, rigid pmma ( single piece ) pciol 18 dioptre, rigid pmma ( single piece ) pciol 18.5 dioptre, rigid pmma ( single piece ) pciol 19 dioptre, rigid pmma ( single piece ) pciol 19.5 dioptre, rigid pmma ( single piece ) pciol 20.0 dioptre, rigid pmma ( single piece ) pciol 20.5 dioptre, rigid pmma ( single piece ) pciol 21.0 dioptre, rigid pmma ( single piece ) pciol 21.5 dioptre, rigid pmma ( single piece ) pciol 22.0 dioptre, rigid pmma ( single piece ) pciol 22.5 dioptre, rigid pmma ( single piece ) pciol 23.0 dioptre, rigid pmma ( single piece ) pciol 23.5 dioptre, rigid pmma ( single piece ) pciol 24.0 dioptre, rigid pmma ( single piece ) pciol 24.5 dioptre, rigid pmma ( single piece ) pciol 25.0 dioptre, capsular tension rings, size12mm , material pmma, open surgery set, thomson retractor, self retaining retractor, morrison retractor, deaver retractor, joll thyroid retractor, vein retractor, vascular clamps ( bull dog / satinsky ) large, vascular clamps ( bull dog / satinsky ) small, fistula probe ( round type ) , split proctoscope, split anoscope, illuminated proctoscope, illuminated anoscope, long needle holder, right angled forceps small, allis forceps long, artery forceps long, kocher forceps long, small scissors, humby knife, humby blade, intestinal clamps, t tube size 16g, chalazion set, chalazion clamp, ligating polymer clips shoul contains bosses, integraded teeth to avoid slippage, non –absorbable radiolucent, bow shape for examination tissue encompassion & hinge to provide flexibility., ligating titanium clips , should be chevron in shape, titanium pre formed, heart shaped wire for inner locking, cartridge should contain spring for easy loading & should contain horizontal & lateral groves, stapler remover stainless steel, septoplasty set, spongistan ( each packet of 12 nos ) , soponge ball, scalpel handle no 3, adson tooth 4inch, micro adson 6inch, 150mm, dissecting forceps tooth 6inch, dissecting forceps non tooth tooth 6inch, halsted mosquito 5inch cur, scissor reynolds std 16cm 6 1 / 4inch, scissor metzenbaum cur 5 3 / 4 inch, scissor metzenbaum str 5 3 / 4 inch, needle holder 6inch de bakey, suction cannula with luer cone 1, 5mm, suction cannula with luer cone 1, 2mm, suction cannula with luer cone 1, 0mm, bone romguers friedmann 5 1 / 2inch, nasal prongs 00 size ( neonatal ) , nasal prongs ( pediatric ) , nasal speculum gold smith, 6.5 cm 1 1 / 2inch, nasal speculum gold smith, 6.5 cm 2 1 / 2inch, nasal speculum 14cm, 5 1 / 2inch, luc forceps luc brunings 18cm, 7 1 / 8inch, tilley forceps 17cm 6 3 / 4inch, reduction forceps ( walsham “universalinch ) 23cm, 9inch, septal straightning forceps 22cm, 8 3 / 4 inch, septum elevator 18cm 7 1 / 8inch ( freer ) , septum elevator 19cm 7 1 / 2inch ( freer ) , septum elevator 23cm 9inch ( killian ) , septum elevator 20cm , 8inch, septal retractor aurficht 18cm 7 1 / 8inch, ball tip probe 7 1 / 2 inch, 19cm, antrum rasps wiener 18cm 3, 5 mm, 77 1 / 8inch, trocar & cannula 2.7mm, file ( masing ) 8 1 / 4 inch, 21cm, hammer ( hajek ) 220mm, 135g, 3 / 4 inch, tongue depressor 5 3 / 4 inch, 16mm, nasal dressing forceps 20cm, scalpel handle no 7, towel clips ( clamps ) , dissecting forceps 8inch non tooth, 200mm, delicate hemostatric forceps str 200mm, 8inch, delicate hemostatric forceps cur 200mm, 8inch, dissecting & ligature forceps baby adson 7 inch, 180mm, mayo hegar needle holder 7 1 / 4 inch, mayo scissor 8inch cur 200mm, metzenbaum scissor 8 inch, cur, 200mm, mouth gag kilner doughty ( boyle davis mouth gag, tongue depressor 5 3 / 4 inch, 16mm, suction yankauer 11 1 / 4 inch, 285mm, adenoid forceps jurasz 19cm, adenoid current beckmann 10mm, 22cm, adenoid current beckmann 11mm, 22cm, adenoid current beckmann 12 mm, 22cm, adenoid current beckmann 13 mm, 22cm, adenoid current beckmann 15 mm, 22cm, tonsil dissector henouble ended 24cm, tonsil snare 29cm, draffian poles, adenoid current beckmann 15 mm, 22cm, adson nontooth 4 3 / 4 inch, suction 3.0mm, frazier 7 inch, halstead mosquito 5 inch cur, arterienklemmen ( crile ) 160mm, 6 1 / 4 inch str, scissor dissecting 4 1 / 2 inch cur, suction 4.0mm, 7 inch, mayo scissor 6 3 / 4 inch cur 170mm, needle holder 5 1 / 8inch halsey, allis 8inch, 200mm, nasal dressing forceps 20cm, ear speculum pead hartmann, raspatories landolt 175mm, 7 inch, kilner retractor ( catspaw ) 13 10mm, 6 inch, wullstein self retaining retracter 130mm, 5 1 / 8 inch, freer elevator double ended 5mm, 19cm, mastoid retractor it 11cm, belucci, mastoid retractor rt 11cm, belucci, antrum curret oval 3.0 6.0, 20cm, steel bowl medium, small bowl steel, cottle nasal forceps 11cm, cottle colum, suction 3.0mm frazier 7 inch, suction 4.0mm, 7 inch, arterienklemann ( halstead mosquito ) 125mm, 5 inch, cur, arterienklemann ( halstead mosquito ) 125mm, 5inch, str, scissor metzenbaum 8 inch , 200mm, str, needle holder ryder 5 1 / 4 inch, hegar mayo needle holder 7 1 / 4 inch , 185mm, suction tips 3, 5 on raspatory with guide 4mm, 20cm, maseing elevator double ended 5mm, 22cm, cottle elevator double ended 4mm, 22cm, cottle alar retractor 2 teeth 10mm 14cm, masing retractor with guide 17mm, 20m, neiver retractor 11mm, 19cm, aufricht nasal retractor, osteotome cottle 4mm, 18cm, osteotome cottle 7mm, 18cm, osteotome cottle 9mm, 18cm, cottle cross bar chisel 7mm, 18cm, masing nasal file 21cm fine, masing nasal rasp 21cm coarse, cottle fomon nasal septum forceps 21cm, cottle septum nife str 14cm, cottle nasal septum speculum 14cm, cottle nasal forceps 15cm, dissecting forceps 8 inch tooth, 200mm, ostium instrument double ended 1.2mm +2.0mm, 9cm, micro scissor delicate str 14cm, nasal scissor cor rt 13.5cm, nasal scissor cor it 13.5cm, heymann sc, nasal scissor 18cm, curret halle sharp oval 21cm, curret oval 3.0 6.0mm, 20cm, weil blaksesley nasal forceps str 3.0mm, weil blaksesley nasal forceps str 4.2mm, weil blaksesley nasal forceps ang upward 45deg 3.0mm, weil blaksesley nasal forceps ang up down 45deg 2.0mm, weil blaksesley nasal forceps cur 30deg rt2.5mm, 11.5cm, weil blaksesley nasal forceps cur 30deg it2.5mm, 11.5cm, holding arm variable with universal clamp base, landolt coagulation on cannula 150mm, 6 inch, short working electrodes 12nos, insulated long shank knife electrode 138mm, insulated long sank needle electrode 136mm, insulated long sank wire loop electrode 128mm, insulated long sank ball electrode, 124mm, ball tip probe 2.0mm 14cm, 5 1 / 2 inch wagner, scope guide round, scope guide flat, lathbury cotton carrier 1 to 2mm, 15cm, hartmann ear speculum 5.5mm, hartmann ear speculum 6.5mm, buck ear current blunt, rosen suction needle 0.7mm str, rosen suction needle 0.9mm str, rosen suction needle 1.2mm str, tube connector luer, micro ear forceps str4 0.5mm, 8cm, needle cur blunt 15cm, hook 90 deg 0.6mm, 15cm, house sickle knife 6.0 1.5mm, 15mm, plaster hook 2.0mm, 15cm, rosen fenesrator 15cm, fisch foot plate hook 0.2mm, 15cm, plaster footplate hook 0.6mm, 15cm, antoli caldela, round knife 2.0mm, , plaster flate knife 15cm, discision knife str 15cm, house curret double ended 1.0 / 1.2mm, 15cm, house curret double ended 1.5 / 1.8mmn 15cm, fish perforator 0.3mm, 18cm, seiffert salivary duct probe 18cm, double eneded robe 1.5mm, 25cm, micro cur dissector 1.0mm, , cartilage knife cur 13cm, medium size artery forceps curved, long artery forceps curved, allis forceps medium size, mosquito artery curved ( small, medium, large ) , mosquito artery straight ( small, medium, large ) , sponge holding forceps ( small, medium, large ) , distilled water 5 ltrs, needle holder long & medium, nerve issector, adson toothed forceps, toothed & non toothed forceps, b.p handle no.3. no 4, babcock’s long & medium size, kockers long curved & st, proctoscope adult, intestinal clamps curved & st, rt angled forcps long, devers broad retractors, langen back retractors, mayo’s scissors st & curved, osteotoms, dressing bins medium, dressing bins small, dressing bins big, gauze cutting scissors heavy, neurosurgery spine instrument, plastic surgery vescular surgery inst, cushing artery curved & st, micro motor & hand pieace, dental surgery inst, bone holding asso size adult & pediatric, pressure injector syringe, tubing set 5154, airrotor super torque, gp cutter, amalgamator, airrotor sprays, dental stone, hand files ( k&h ) size 10 to 90, check retractor, polishing kit composite, developer and fixer ( dental ) , mouth mirror with handle, dental stright probes, probes, explorer, tweezers regular, formalin 2 percentage 20ltr can ( formaldehyde ) , stylet, surgical patties, hydrogen peroxide 6 percentage w / v 5ltr can, 3way extension line 100cm, 3way extension line 10cm, big r.c. help ( edta paste ) , forma cresol 30ml, bonding agent, micro brushes, bulphase led curing gun cardless, matrix bands st, matrix bands curved, mylar strips, laryngeal mask airway ( lma ) size 3 & 4, toffelmaire retainer ( universal local ) , ivory retainer, wooden wedges plasti light transmetting, kidney trays big, kidney trays 8inch, amalgam capsules, teflon coated composite restoration instruments set of 5, die stone, zoe cement, disposable suction tips, meta pex, composite polishing kit, dental varnish, airrotor hand piece, micromotor contro angle handpeice, micro motor stright hand peice, fiber post size. 20, 25, 30, micro tips ( 200 micro lts yellow colour ) , woodpecker scaler with tips, strelization roll 7.5 cms, autoclave pouches, acid etchant syringe, ah plus root canal sealer, airoter burs ( round stright taper gum cutting set ) , burs ( flame shaped, pear shaped ) , alginate impression material ( dust –free ) , articulating paper, ortho drape kit, calcium hydroxide 2 paste system, calcium hydroxide powder, carborandum disc, disposable drape set, disposable steriles pads ( adhesive ) sterizone ) , ioban ( tranparent ) , disposable surgical gowns, sodium citrate vaccutainer, composite finishing kit, finishing burs, copper niti wire round, crimpable hook, dental stone, die stone, eugenol liquid, zinc phosphate powder, expansion screw ( hyrax ) & ( jack screw ) no. 9, 11, 13, finger pluggers, prophylactic polishing brush, airotor handpieces, electric pulp tester, caries dye 10ml, green stick compound, thermo plastised unit, surgical head lamp, gutta percha points, guttapercha protaper 4 percentage and 6percentage size. 25, 30, 35, guttapercha sticks, paper points size. 20 90, periodontal dressing non eugenol, stright tayund fissure, plaster of paris 30kgs, polishings cups and brushes, polycarboxesylate cement, niti rotary files ( profapen / k3 x f ) , rc cal, reamers, rubber base impression material light body, sand paper, ro drops ( antiscalent solutions ) 5l, citrix la ( citrosterile ) , sodium hypochloride solution 5 percentage w / v 20ltr can, id gel card blood grouping, id gel card cross matching ( ro drops dosing chemicals ) , diluent 2 liss solution ( oragnic acid based disinfectant, for heat disinfection of hemodialysis machines ) , spreader ( 20, 25, 30, 35 ) , bains circuites, surgical straight bur no 701 and no 702, small black brushes for lab hand piece, ceramic dentine, begosol liquid, glaze liquid, ceramic firing trays and studs, yellow stain, ceramic buil up brushes, die pins, die cutting saw blades, twizers, thermo plastised g.p obturating unit with g.p refill and pluggers, soft tissue laser unit 3w, surgical loupes size. 2.5, surgical loupes size. 3.5, composite matricing system, electric pulp teser, light transmetting wedges, x ray e speed intraoral, 10 x 8 film hangerss, begg’s blacket flat, begg’s blacket contoured, aj wilock arch wire 0.016 inch, aj wilock arch wire 0.020 inch, waste disposable covers colour & logo as per pollution control act green, haemodialysis fluid ( concentrated acidic solution ) 20ltr can, double lumen hemodialysis catheter 11.5fr curved ( size 11.5fx13.5 cm, luer lock caps, step dialator, introducer needle 18 ga x 7 cm ) , double lumen hemodialysis catheter 11.5fr straight ( size 11.5fx13.5 cm, luer lock caps, step dialator, introducer needle 18 ga x 7 cm ) , sodium bicarbonate powder ( 1:34, 1:83 nahco3 600gms, nacl 225gms ) , blood tubing set for hemodialysis ( volume measurment 153+ / 10% ) , f6 dialyzer ( tested by human blood polysulfone, hemoflow, sa 1.3m2, tmp 600mmhg, avf needle 17g, nebuliser machine, suction apparatus electrically operated 1hp moter heavy gage ( 1 / 4 hp motor suction capacity 35 lts / min ) , wheel chair stainsteel, wheel chair foldable, strectre with trolly, digital bp apparatus, b p apparatus mannual, cling drape ( 5 inch x 20mtr ) , oxygen flowmeter with humidifier for oxygen cylinder, wall mount oxygen flow meter, laryngoscope adult with blades, laryngoscope paediatric with blades, laryngoscope bulbs, laryngeal blades 4 inch, c.r. films 10 x 8 inch, c.r. films 11 x 14 inch, c.r. films 14 x 17 inch, tourniquet tubing, connecting tubing no. 5154 ( med rad company ) pressure injector, biopsy needles 16g ( bard company ) , biopsy needles 18g ( bard company ) , tumor biopsy forceps, barium sulphate powder 400 grams, needles ( 26 g, 30 g, 24 g ) , microbar barium suspension 1 ltr, red rubber catheter, red rubber catheter peadiatric, stethoscope, ultra sound gel 5kg can, skin grafting blade, c arm covers, c arm drapes, surgical spirit 400ml, rinneys disposable clips, rinneys clip applicater, scleral buckles #40, scleral buckle #270, scleral buckle#276, scleral buckle#277, scleral buckle#279, scleral buckle#280, eto pouches 200mm, eto pouches 100mm, intravitreal dexamethasone implant, ureteral balloon dilator ( 6mm / 40mm length / 4.8 fr ) , amplatz dilator set ( 6 30 fr ) , nottingham one step dilator, nottingham one step dilator, nelaton catheter, tipless nitinol basket ( segura ) , tipless nitinol basket ( segura ) , tipless nitinol basket ( segura ) , stainless steel basket with tip, stainless steel basket with tip, nitinol basket with tip ( segura ) , nitinol basket with tip ( segura ) , nitinol basket with tip ( segura ) , stent removal forceps, ursl grasper triprong, ursl grasper triprong, ip needle ( 2 part ) , biopsy gun ( bard ) , penile clamp, pcnl grasper ( biprong ) , pcnl grasper ( triprong ) , pcnl basket without handle, pcnl basket without handle, vessel loops, double floppy tip guide wire ( biwire ) , terumo guide wire, terumo guide wire, terumo guide wire, zeebra guidewire, 4 wire nitinol tipless basket, 4 wire nitinol tipless basket, 4 wire nitinol tipless basket, ureteral access sheath, ureteral access sheath, ureteral access sheath, ureteral access sheath, ureteral access sheath, ureteral access sheath, amplatz sheath, amplatz sheath, amplatz sheath, amplatz sheath, amplatz sheath, halfmoon sheath for viu sheath –karl storz, single channel bridge karl storz, cold knife for viu, portable endoscopic light source, infant feeding tube no.5, infant feeding tube no.6, infant feeding tube no.7, infant feeding tube no.8, infant feeding tube no.10, infant feeding tube no.12, eye pad ( neonatal size ) , pcn catheter ( pigtail ) with needle, pcn catheter ( pigtail ) with needle, pcn catheter ( pigtail ) with needle, pcn catheter ( pigtail ) with needle, pcn catheter ( pigtail ) with needle, nephrostomy tube, nephrostomy tube, nephrostomy tube, nephrostomy tube, malecot’s catheter, chest drainage catheter, electrocautery plates silicon with wires – reusable type, skin traction set ( non adhesive ) , electrocautery patient plates, lithoclast probes for urs, lithoclast probes for pcnl, cautery machine, tur irrigation set, ellicks evacuator, dlt tube, sodalime 5kg, arterial line catheter, bladder wash syringe, measuring range 10 600 mg / dl, blood sample 0.5ul fresh capillary blood, hematocrit range 33 52 percent, built in thermistor, auto coding shoud copmly with iso requriements, glucometer free of cost supply for wards, blood glucose strip with, cb plus non vacutainer clot 4ml ( k3 edta tubes ) , cb plus non vacutainer clot 4ml ( k3 edta tubes ) , surgeons cap disposable, face masks disposable ( with tying thread ) , urine collection bag ( good quality ) 2000ml, vaccum suction tubing ( kink resistant ) with curved suction tip, suction drain set, abdominal drain kit ( bag and smooth catheter set ) , abdominal drain kit ( bag and smooth catheter set ) , turp drape ( disposable ) , abdominal drape, pcnl drape, cidex solution ( glutraldyde solution ) 5 ltr can, autoclavable silicon coated rubber sheet, working dental chair, blood transfusion set sterile, surgical blade, transpore surgical adhesive tape 2 ( 12 roll per box ) , b p apparatus bulb, small plastic containers, ot shoes, ot goggles, hydrocolloid gel, hydrocolloid spray, metronidazole gel 2% w / w 30gm, magnesium sulphate solution, chlorhexidine solution 2% w / v, icd drains 28g, under water seal bag, abg solution pack cartridiges, streile medicated collagen sheets film dressing impregnated with silver sulphadiazine usp 1% w / w as a sustain relase system size 20cm x 40 cm, streile medicated collagen sheets film dressing impregnated with silver sulphadiazine usp 1% w / w as a sustain relase system size 15cm x 30 cm, streile medicated collagen sheets film dressing impregnated with silver sulphadiazine usp 1% w / w as a sustain relase system size 10cm x 20 cm, silicone gel adhesive hydrocellular foam silver dressing 17.5 x 17.5cm, silicone gel adhesive hydrocellular foam silver dressing 12.5x12.5cm, purilon gel, surgicel, bleaching powder ( analytical grade 5kg bags ) , povidone iodine ointment 125gm, instrument cleanser 1000ml ( proteolytic 15 30% non ionic surfactant1alkyl dimethlbenzyl ammonium chloride, fragrance ) 1ltr, lysoformin 3000 ( formaldehyde free ) 1000 ml, high level disinfectant solution ( orthophthalaldehyde ) 0.55% w / w, disposable draping sheet ( under pad 60 x 90 cm ) , varicose veins mayo stripper, synthetic absorbable sutures antibacterial, triclosan coated polyglactin 910 size 1 with 40mm 1 / 2 circle round body gs needle, suture length 90 cm, synthetic absorbable sutures antibacterial, triclosan coated polyglactin 910 size 1 with 23mm 1 / 2 circle reverse cutting heavy portt closure needle, suture length 70 cm, synthetic absorbable sutures antibacterial, triclosan coated polyglactin 910 size 2 with 40mm 1 / 2 circle reverse cutting, os needle, suture length 90 cm, synthetic absorbable sutures antibacterial, triclosan coated polyglactin 910 size 1 with 40mm 1 / 2 circle reverse cutting, os needle, suture length 90 cm, synthetic absorbable sutures antibacterial, triclosan coated polyglactin 910 size 1 0 with 36mm 1 / 2 circle reverse cutting os needle, suture length 90 cm, synthetic absorbable sutures antibacterial, triclosan coated polyglactin 910 size 2 0 with 31mm 1 / 2 circle round body needle, suture length 90 cm, synthetic absorbable sutures antibacterial, triclosan coated polyglactin 910 size 3 0 with 26mm 3 / 8 circle cutting needle, suture length 90 cm, synthetic absorbable sutures antibacterial, triclosan coated polyglactin 910 size 4 0 with 16mm 5 / 8 circle cutting needle, suture length 45 cm, synthetic absorbable sutures antibacterial, triclosan coated polyglactin 910 size 3 0 with 20mm 1 / 2 circle round body needle, suture length 70 cm, synthetic absorbable sutures antibacterial, triclosan coated polyglactin 910 size 4 0 with 20mm 1 / 2 circle round body needle, suture length 70 cm, synthetic absorbable sutures antibacterial, triclosan coated polyglactin 910 size 5 0 with 16mm 1 / 2 circle oval round body needle, suture length 45 cm, synthetic absorbable sutures coated polyglactin 910 size 1 with 45mm 1 / 2 circle blunt taper point ( heavy ) ethiguard needle, suture length 90 cm, synthetic fast absorbable sutures coated polyglactin 910 rapide absorbable size 1 0 with 36mm 1 / 2 circle taper cut needle, suture length 110 cm, synthetic fast absorbable suture – coted polyglactin 910 rapide absorbable size 4 0 with 16mm 1 / 2 circle cutting needles, suture length 45 cm, synthetic absorbable suture materials antibacterial, triclosan coated polyglecaprone 25 –size 3 0 with 26mm 1 / 2 circle oval round body visi black jb needle, suture length 70cm, synthetic absorbable suture materials antibacterial, triclosan coated polyglecaprone 25 –size 4 0 with 16mm 3 / 8 circle reverse cutting ps 3 prime needle, suture length 70cm, synthetic absorbable suture materials antibacterial, triclosan coated polyglecaprone 25 –size 5 0 undyed with 16mm 3 / 8 circle reverse cutting ps 3 prime needle, suture length 70cm, synthetic absorbable suture materials antibacterial, triclosan coated polyglecaprone 25 –size 3 0 with 24mm 3 / 8 circle reverse cutting ps 3 prime needle, suture length 70cm, synthetic absorbable sutures poly dioxanone / antibacterial triclosan coated polydioxanone size 1 with 48 mm 1 / 2 circle round body needle suture 1length 150 cm loop, synthetic absorbable sutures poly dioxanone / antibacterial triclosan coated polydioxanone size 2 0 with 26 mm 1 / 2 circle round body needle suture 1length 70 cm, synthetic absorbable sutures –antibacterial, triclosan coated polydixanone size 3 0 with 17mm 1 / 2 circle round body needle, suture length 70cm, synthetic absorbable sutures –antibacterial, triclosan coated polydixanone size 4 0 with 17mm 1 / 2 circle round body needle, suture length 70cm, synthetic absorbable sutures violet monofilament polydioxanone size 1 with 22 mm 1 / 2 circle reverse cutting heavy portt closure needle, suture length 45cm port, synthetic absorbable sutures polydioxanone size 5 0 with 13mm 3 / 8 circle round body c 1 needle, suture length 70cm, synthetic absorbable sutures polydioxanone size 6 0 with 11mm 3 / 8 circle round body ( 220 microns ) by double needle, suture length 45cm, natural non absorbable black braided silk sutures size 1 with 60mm 3 / 8 circle cutting needle, suture length 76cm, natural non absorbable black braided silk sutures size 1 0 with 30mm 1 / 2 circle round body needle, suture length 90cm, natural non absorbable black braided silk sutures size 2 0 with 30mm 1 / 2 circle round body, needle suture length 90cm, natural non absorbable black braided silk sutures size 3 0 with 26mm 3 / 8 circle reverse cutting needle, suture length 76cm, natural non absorbable black braided silk sutures size 3 0 with 25mm 1 / 2 circle round body needle, suture length 90cm, natural non absorbable black braided silk sutures size 4 0 with16 mm3 / 8 circle cutting ethiprime needle, suture length 90cm, synthetic non absorbable monofilament nylon suture ( black polyamide ) size 3 0 with 26 mm 3 / 8 circle cutting needle suture length 70cm, synthetic non absorbable monofilament nylon suture ( black polyamide ) size 2 0 with 45 mm 3 / 8 circle reverse cutting needle suture length 70cm, synthetic non absorbable monofilament nylon suture ( black polyamide ) size 3 0 with 16 mm 3 / 8 circle ethiprime needle suture length 70cm, synthetic non absorbable monofilament nylon suture ( black polyamide ) size 4 0 with 16 mm 3 / 8 circle ethiprime needle suture length 70cm, synthetic non absorbable polypropylene sutures size 1 with 40mm 1 / 2 circle round body heavy needle, suture length 70cm, synthetic non absorbable polypropylene sutures size 1 0 with 30mm 1 / 2 circle round body needle, suture length 90cm, synthetic non absorbable polypropylene sutures size 2 0 with 30mm 1 / 2 circle round body needle, suture length 90cm, synthetic non absorbable polypropylene sutures size 3 0 with 25mm 1 / 2 circle round body needle, suture length 90cm, synthetic non absorbable polypropylene sutures size 4 0 with 17mm 1 / 2 circle round body needle, suture length 70cm, synthetic non absorbable polypropylene sutures size 4 0 with 13mm 3 / 8 circle reverse cutting needle, suture length 45cm, synthetic non absorbable polypropylene sutures size 5 0 with 13mm 3 / 8 circle reverse cutting ethiprime needle, suture length 90cm, synthetic non absorbable polypropylene sutures size 6 0 with 13 mm 3 / 8 circle round body c 1 ( 282 microns ) double needle, sutures length 60 cm, synthetic non absorbable polypropylene sutures size 7 0 with 9.3mm 3 / 8 circle taper point bv175 8 ethalloy double needle, suture length 70cm, synthetic non absorbable polybutylate coated polyster ( ethibond ) braided suture size 2 with 44.8 mm, 1 / 2 circle tapercut needle 4 sutures per pack, synthetic non absorbable polybutylate coated polyster ( ethibond ) braided suture size 5 with 44.8 mm, 1 / 2 circle tapercut needle 4 sutures per pack, absorbable unidirectional knotless tissue control device, symmetric anchoring pattern with 5 anchors / cm , triclosan coated polydioxanone with fixation tab , size 0, 36mm 1 / 2 circle reverse cutting os 6 needle, 45 cm, absorbable unidirectional knotless tissue control device, symmetric anchoring pattern with 5 anchors / cm , triclosan coated polydioxanone with fixation tab , size 1, 36mm 1 / 2 circle reverse cutting os 6 needle, 45 cm, absorbable unidirectional knotless tissue control device, symmetric anchoring pattern with 5 anchors / cm , triclosan coated polydioxanone with fixation tab , size 2 0, 26mm 1 / 2 circle round body sh needle, 45 cm, composite light weight mesh made of polyglecaprone 25 and polypropylene size 6 cm x 11 cm, composite light weight mesh made of polyglecaprone 25 and polypropylene size 15cm x 15 cm, composite light weight mesh made of polyglecaprone 25 and polypropylene size 10cm x 15 cm, tissue separating mesh polydioxanone and oxydized regenerated cellulose coated on polypropylene mesh size 10 cm x 15 cm, tissue separating mesh polydioxanone and oxydized regenerated cellulose coated on polypropylene mesh size 15 cm x 15 cm, tissue separating mesh polydioxanone and oxydized regenerated cellulose coated on polypropylene mesh size 15 cm x 20 cm, 5 mm absorbable polydioxanone strap mesh fixation device with 25 straps single loaded deployment, strap length of 7.2mm with 2 point fixation, auto lock handle and low strap indicator strap length of 7.2mm, macro porus partially absorbable mesh made up of approximately equal parts of polypropylene monofilament fiber ( 6 0 ) and poliglecaprone 25 monofilament fiber ( 5 0 ) with pore size 2.7 mm having a weight of 39 g / m2 and containing blue orientation stripes of polypropylene ( size 10, macro porus partially absorbable mesh made up of approximately equal parts of polypropylene monofilament fiber ( 6 0 ) and poliglecaprone 25 monofilament fiber ( 5 0 ) with pore size 2.7 mm having a weight of 39 g / m2 and containing blue orientation stripes of polypropylene ( size 15, soft polypropylene mesh with 1 5 to 2mm pore size for hernia repair size 15cm x 15cm, soft polypropylene mesh with 1 5 to 2mm pore size for hernia repair size 7.6cm x 15cm, 2 octyl cynoacrylate liquid topical skin adhesive packaged within a pen applicator along with self adhering mesh of 22 cm ( 2 units / box ) , topical monomeric ( 2 octyl cyanoacrylate ) skin adhesive single use vial with applicator, 0.36 ml, sterile bone wax weight 2.5 grams, absorbable adhesion barrier made of oxidized regenerated cellulose size 3 x 4 inches, skin stapler ( non stop feed for reducing jam , pre cock function, sharper staples, taller staples & window for better visibility ) , stapler remover, oxidized regenerated cellulose based topical absorbable hemostat, fibrillar / layer form, with bactericidal property. fibril material ( 7layers ) for broad surface area coverage. approved by us fda size 1x2 inch, oxidized regenerated cellulose based topical absorbable hemostat, fibrillar / layer form, with bactericidal property. fibril material ( 7layers ) for broad surface area coverage. approved by us fda size 2x4 inch, oxidized regenerated cellulose based topical absorbable hemostat, structured non woven material, with bactericidal property. ease of use in both open and minimally invasive procedures. approved by us fda size 2x4 inch, oxidized regenerative cellulose ( orc ) shear woven absorbable hemostat with carboxyl content 18% to 24% w / w size 2inchesx3inches, oxidized regenerative cellulose absorbable hemostatic gelatin sponge sterlized by dry heat with less than 0.5eu / device 7cm x5cmx1cm, absorbable gelatin based topical absorbable flowable hemostat with 6cc syringe pre filled with hemostatic matrix. with 14.3 cm white applicator tip & 14.6 cm blue flexible applicator tip, powdered oxidized regenerated cellulose pre filled in an easy to use applicator to stop continuous, broad surface oozing – fast, specifically on large friable or raw surfaces, powder volume 3gms, surgicel powder endoscopic 2 in 1 applicator, synthetic absorbable sutures antibacterial triclosan coated polyglactin 910 size 1 0 with 40mm, 1 / 2 circle round body needle suture length 90 cm ( 1x12foils ) , synthetic absorbable sutures antibacterial triclosan coated polyglactin 910 rapide size 1 0 with 36mm, 1 / 2 circle tapercut needle suture length 110 cm ( 1x12foils ) , synthetic absorbable sutures antibacterial triclosan coated polyglactin 910 rapide size 2 0 with 36mm, 1 / 2 circle tapercut needle suture length 90 cm ( 1x12foils ) , natural absorbable sutures chromic atraumatic catgut size 1 with 45mm, 1 / 2 circle round body needle suture length 100 cm ( 1 x 12 ) , natural absorbable sutures chromic atraumatic catgut size 1 0 with 45mm, 1 / 2 circle round body needle suture length 100 cm ( 1 x 12 ) , natural absorbable sutures chromic atraumatic catgut size 2 0 with 30mm, 1 / 2 circle round body needle suture length 76 cm ( 1 x 12 ) , natural absorbable sutures chromic atraumatic catgut size 3 0 with 20mm, 1 / 2 circle round body needle suture length 76 cm ( 1 x 12 ) , natural absorbable sutures chromic atraumatic catgut size 4 0 with 16mm, 3 / 8 circle round body needle suture length 76 cm ( 1 x 12 ) , synthetic absorbable sutures coated polyglactin 910 size 6 0 with 8mm, 3 / 8 circle micro point spatulated needle suture length 45 cm ( 1x12foils ) , synthetic non absorbable polypropylene suture size 4 0 with 16mm, 1 / 2 circle round body needle suture length 70 cm ( 1 x 12 ) , synthetic absorbable sutures antibacterial triclosan coated polydioxanone size 5 0 with 13mm, 1 / 2 circle round body rb 2 double needle suture length 70 cm ( 1x12foils ) , synthetic absorbable sutures antibacterial triclosan coated polyglecaprone 25 size 3 0 with 26mm, 3 / 8 circle reverse cutting fs needle suture length 70 cm ( 1x12foils ) , synthetic absorbable sutures antibacterial triclosan coated polyglecaprone 25 size 2 0 with 31mm, 1 / 2 circle round body needle suture length 70 cm ( 1x12foils ) , synthetic non absorbable monofilament nylon suture ( black polyamide ) size 4 0 with 16mm, 3 / 8 circle reverse cutting ethiprime needle suture length 45 cm ( 1 x 12 ) , oxidized regenerative cellulose ( orc ) shear woven absorbable hemostat with carboxyl content 18% to 24% w / w size 2inchesx3inches, oxidized regenerative cellulose ( orc ) shear woven absorbable hemostat with carboxyl content 18% to 24% w / w size 4inchesx8inches, absorbable unidirectional barbed device, symmetric anchoring pattern, triclosan coated polydioxanone, size 1 with 1 / 2 circle taper point, ctx 48mm needle, suture length of 45cm ( 1x12foils ) , absorbable unidirectional barbed device, symmetric anchoring pattern, triclosan coated polydioxanone, size 1 0 with 1 / 2 circle taper point, ct 1 with 36mm needle, suture length of 45cm ( 1x12foils ) , dyed polyester poly ( p dioxanone ) 120–180 days size 1 0 bidirectional spiral with 1 / 2 circle taper point mh 36mm needle suture length 24cm x 24cm with leader length 35mm ( 1*12 ) , dyed polypropylene non absorbable size 1 bidirectional spiral with 1 / 2 circle, taper point, ct 1 36mm needle, suture length 24cm x 24cmwithleader length 35mm ( 1*12 ) , synthetic non absorbable monofilament nylon sutute ( black polyamide ) size 1 0 45mm 3 / 8 circle reverse cutting needle, stutre length 70cms ( 1*12 ) , synthetic non absorbable polypropylene sutures size 5 0 with 13mm 1 / 2 circle taper point tf double needle, suture length 60 cm ( 1*12 ) , synthetic fast absorbable suture – coted polyglactin 910 rapide absorbable size 2 0 with 36mm 1 / 2 circle round body & reverse cutting double needles, suture length 140 cms, flowable gelatin hemostatic matrix with human thrombin 2000iu, 6cc syringe pre filled with hemostatic matrix with 14.3cm white applicator tip & 14.6cm blue flexible applicator tip ( 8ml gelatin based hemostatic matrix with thrombin ) , 34 cm flowable gelatin hemostatic matrix endoscopic applicator, sterile bone wax weight 2.5 grams, synthetic absorbable sutures antibacterial, triclosan coated polydioxanone size 1 with 48mm 1 / 2 circle round body needle, suture length 90 cm, synthetic non absorbable monofilament nylon sutures ( black polyamide ) size 8 0 with 6mm 3 / 8 circle micro point spatulated double needle , suture length 38 cm, synthetic non absorbable monofilament nylon sutures ( black polyamide ) size 10 0 with 6mm 3 / 8 circle micro point spatulated double needle , suture length 38 cm, synthetic non absorbable monofilament nylon sutures ( black polyamide ) size 9 0 with 6mm 3 / 8 circle micro point spatulated needle , suture length 38 cm, natural non absorbable black braided silk sutures ( reels ) size 1 black braided silk reel with suture length of 25 meters, natural non absorbable black braided silk sutures ( reels ) size 1 0 black braided silk reel with suture length of 25 meters, natural non absorbable black braided silk sutures ( reels ) size 2 0 black braided silk reel with suture length of 25 meters, natural non absorbable black braided silk sutures ( reels ) size 3 0 black braided silk reel with suture length of 25 meters, absorbable unidirectional knotless tissue control device, spiral anchoring pattern with anchors at 15 degrees and 20 anchors / inch with an adjustable fixation loop at one end of the suture, triclosan coated poliglecaprone 25, tensile strength 2 0, 26mm 1 / 2 circle round body needle, 20 cm, absorbable unidirectional knotless tissue control device, symmetric anchoring pattern with 5 anchors / cm , triclosan coated polydioxanone with fixation tab , size 1, 48mm 1 / 2 circle round body ctx needle, 45 cm, absorbable unidirectional knotless tissue control device, symmetric anchoring pattern with 5 anchors / cm , triclosan coated polydioxanone with fixation tab , size 2 0, 26mm 1 / 2 circle round body sh needle, 45 cm, universal open linear cutter catridge with selectable closed staple height of 1.5mm, 1.8mm and 2mm having 6 row ( 3 on either side of the cut line ) , 3d staple technology with staple line of 61mm and cut line of 58mm, universal open linear cutter catridge with selectable closed staple height of 1.5mm, 1.8mm and 2mm having 6 row ( 3 on either side of the cut line ) , 3d staple technology with staple line of 81mm and cut line of 78mm, linear cutter with intermediate locking position for easy tissue manipulation, two sided firing for easy handling, proximal pre load support for consistent staple formation, with selectable closed staple height of 1.5mm, 1.8mm and 2mm, linear cutter with intermediate locking position for easy tissue manipulation, two sided firing for easy handling, proximal pre load support for consistent staple formation, offering 6 row, 3d staple technology and staple line of 58mm, cut line of 61mm, circular stapler intra luminal staplers with 18 cm long curved shaft, detachable 21mm diameter head, controlled tissue compression with adjustable staple height ( 1.0mm 2.5mm ) , cutting washer with tactile feedback indicating completion of firing sequence, 2 rows of staple line with long open staple leg length of 5.5mm, lumen size of 12.4mm, , circular stapler intra luminal staplers with 18 cm long curved shaft, detachable 25mm diameter head, controlled tissue compression with adjustable staple height ( 1.0 2.5mm ) , cutting washer with tactile feedback indicating completion of firing sequence, 2 rows of staple line with long open staple leg length of 5.5mm, lumen size of 16.4mm, circular stapler intra luminal staplers with 18 cm long curved shaft, detachable 29mm diameter head, , controlled tissue compression with adjustable staple height ( 1.0 2.5mm ) , cutting washer with tactile feedback indicating completion of firing sequence, 2 rows of staple line with long open staple leg length of 5.5mm, lumen size of 20.4mm, circular stapler intra luminal staplers with 18 cm long curved shaft detachable 33mm diameter head, 18 cm shaft length, controlled tissue compression with adjustable staple height ( 1.0 2.5mm ) , cutting washer with tactile feedback indicating completion of firing sequence, 2 rows of staple line with long open staple leg length of 5.5mm, lumen size of 24.4mm, gastro intestinal stapler with curved head designed for low pelvic access with enhanced visibility, delivering four curvilinear rows of staples in the width of 30mm space with a 40 mm single cut line in between the staple line, tissue retaining pin to prevent tissue slippage, intermediate locking position for precise placement, a ) curved blue cartridge having close staple height of 1.5 mm, tactile feedback on completion of firing sequence, new anvil , knife with every catridge b ) curved green cartridge having close staple height of 2.0 mm, tactile feedback on completion of firing sequence, new anvil, knife with every catridge, battery operated articulating laparoscopic vascular endo stapler with 4 rows staple line ( 2 on either side of the cut line ) of 35mm and cut line of 30mm, 360 degrees rotation, 50 degrees articulation on both sides, 9mm shaft width and 7mm anvil width, endoscopic linear cutter cartridge having 35mm staple line, 30 mm cut line, having closed staple height of 1 mm and 4 rows of staple line, endoscopic articulating linear cutter stapler , 360 degree rotation shaft, 6 row ( 3 on either side of cut line ) staples offering 60mm staple line and 57 mm cut line, one handed natural articulation up to 45 degrees on both sides ( ( options of locking at 15 degree, 30 degree and 45 degree on either side ) , precision machined anvil capable of delivering system wide pre compression, wide proximal to distal jaw aperture ( proximal 8 mm, distal 22 mm ) , 3 point gap control for alignment and calibration throughout the 60 mm staple line, interchangeable 6 row ( 3 on either side of cut line ) cartridge options of 0.75, 1.0, 1.5, 1.8, 2.0 and 2.3 mm closed staple height, manual override safety option, capable of entry through a 12 mm trocar sleeve, shaft length of 340mm, 4 stroke firing sequence, endoscopic articulating linear cutter stapler , 360 degree rotation shaft, 6 row ( 3 on either side of cut line ) staples offering 60mm staple line and 57 mm cut line, one handed natural articulation up to 45 degrees on both sides ( ( options of locking at 15 degree, 30 degree and 45 degree on either side ) , precision machined anvil capable of delivering system wide pre compression, wide proximal to distal jaw aperture ( proximal 8 mm, distal 22 mm ) , 3 point gap control for alignment and calibration throughout the 60 mm staple line, interchangeable 6 row ( 3 on either side of cut line ) cartridge options of 0.75, 1.0, 1.5, 1.8, 2.0 and 2.3 mm closed staple height, manual override safety option, capable of entry through a 12 mm trocar sleeve, shaft length of 440 mm, 4 stroke firing sequence, endoscopic blue linear cutter catridge with reload surface having pocket extensions to prevent tissue milking, staples with asymmetric bent tip for consistent staple formation with an option of closed staple height of 1.5 mm, 6 rows of staple line with 3 on each side of cut line, endoscopic green linear cutter cartridge with reload surface having pocket extensions to prevent tissue milking, staples with asymmetric bent tip for consistent staple formation with an option of closed staple height of 2 mm, 6 rows of staple line with 3 on each side of cut line, endoscopic gold linear cutter cartridge with reload surface having pocket extensions to prevent tissue milking, staples with a symmetric bent tip for consistent staple formation with an option of closed staple height of 1.8 mm, 6 rows of staple line with 3 on each side of cut line, endoscopic white linear cutter catridge with reload surface having pocket extensions to prevent tissue milking, staples with asymetric bent tip for consistent staple formation with an option of closed staple height of 1 mm, 6 rows of staple line with 3 on each side of cut line, endoscopic 360 degrees rotating multiple clip applier with 10mm diameter, having lateral and transverse grooves, anti clip drop mechanism ( ratchet mechanism ) and non retracting jaws, 29 cm shaft length with 20 pre loaded titanium clips of medium / large size., 12 mm optically guided 100mm long bladeless trocar with optiview technology, having wiping, wicking and absorbing technology to reduce smudging during camera reinsertion. with bilateral tissue separators, optical tip to eliminate blind entry, clear ribbed cannula, recessed stopcock valve, funnel shaped housing, duckbill secondary seal, integrated universal seal that eliminates the use of reducer., hand activated curved taper tip coagulating shears compatible with ultrasonic cutting and coagulation device, 9cm length, 16mm curved active blade capable of sealing blood vessels up to and including 5mm in diameter, with ergonomic symmetrical finger ring grip, hand activated curved taper tip coagulating shears compatible with ultrasonic cutting and coagulation device, 17cm length, 16mm curved active blade capable of sealing blood vessels up to and including 5mm in diameter, with ergonomic symmetrical finger ring grip, advance bipolar hand activated probe with 5mm shaft diameter and 35 cm shaft length with 3 mm wide curved jaw design with seal length of 19mm and cut length of 17mm, sealing vessel upto and including 7mm through radio frequency energy and having a temperature controlled mechanism within the jaw and having articulation of 110 degree ( 55 degrees on both sides ) and capable of 360 degrees rotation, laparoscopic shears 5mm diameter, 36cm long, 15mm curved coated blade and a clamp arm with tissue pad, capable of cutting, sealing, grasping and coagulating blood vessels up to and including 5mm in diameter, 360 degrees rotation, ergonomic handle compatible with ultrasonic energy source and capable of hand and foot activation, laparoscopic shears 5mm diameter, 36cm long, 15mm curved coated blade and a clamp arm with tissue pad, capable of cutting, sealing, grasping and coagulating blood vessels up to and including 7mm in diameter, 360 degrees rotation, advance hemostasis hand activation mode for sealing vessels upto 7mm in diameter , ergonomic handle compatible with ultrasonic energy source and capable of hand and foot activation, 3mm hand activated dissecting hook for open surgeries, blunt outer radius for coaptive coagulation, 60 degree sharp inner radius for cutting. should have adjustable shaft length from 4cm to 9cm., optically guided bladeless trocar 12mm with optiview technology, having wiping, wicking and absorbing technology to reduce smudging during camera reinsertion. with bilateral tissue separators, optical tip to eliminate blind entry, clear ribbed cannula, recessed stopcock valve, funnel shaped housing, duckbill secondary seal, integrated universal seal that eliminates the use of reducer, 100mm length, optically guided bladeless trocar 5mm with optiview technology, having wiping, wicking and absorbing technology to reduce smudging during camera reinsertion. with bilateral tissue separators, optical tip to eliminate blind entry, clear ribbed cannula, recessed stopcock valve, funnel shaped housing, duckbill secondary seal, integrated universal seal that eliminates the use of reducer, 100mm length, optically guided bladeless trocar 5mm with optiview technology, having wiping, wicking and absorbing technology to reduce smudging during camera reinsertion. with bilateral tissue separators, optical tip to eliminate blind entry, clear ribbed cannula, recessed stopcock valve, funnel shaped housing, duckbill secondary seal, integrated universal seal that eliminates the use of reducer, 150mm length, optically guided bladeless trocar 12mm with optiview technology, having wiping, wicking and absorbing technology to reduce smudging during camera reinsertion. with bilateral tissue separators, optical tip to eliminate blind entry, clear ribbed cannula, recessed stopcock valve, funnel shaped housing, duckbill secondary seal, integrated universal seal that eliminates the use of reducer, 150mm length, straight atraumatic 5mm grasper, ergonomically designed with 360 degree rotation with ratchet mechanism having 34cm length for laparoscopic surgery with lock, curved 5mm scissor, ergonomically designed with 360 degree rotation with universal monopolar attachment having 34cm length for laparoscopic surgery, curved 5mm dissector, ergonomically designed with 360 degree rotation with universal monopolar attachment having 34cm length for laparoscopic surgery, 5mm babcock extractor, ergonomically designed with 360 degree rotation with ratchet mechanism having 34cm length for laparoscopic surgery, 10mm babcock extractor, ergonomically designed with 360 degree rotation with ratchet mechanism having 34cm length for laparoscopic surgery, self righting reusable needle holder conducting auto correction for needle holding angles 5mm diameter with palm type handle, sleeve trocar 5mm, sleeve trocar 12mm, hemorrhoids pph03, knife module comapatable stainless steel liner cutter reusable 55mm, blue reload for stainless steel linear cutter 55mm, harmonic blue handpiece, stainless steel liner cutter reusable 55mm, green reload for stainless steel linear cutter 55mm, harmonic handpiece 220 v, unipolar ptfe coated curve blade / j hook / l hook / needle / spatula / ball electrodes compatible with 2 button pencils, all sizes ( 33 / 45 cm ) for lap surgery., should be based on capacitive coupling principle.should be made of akton polymer. can be used for all patient’s weight > 350 grams.should be radiolucent and latex free, no adhesive related irritation to patient skin.should be usfda approved.should be compatible to any electrosurgical generator.size: 36inchlx20inchwx1 / 8inchthichness, linear cutter gun 55m blue, with cam mechanism to ensure two rows of uniform b shape staple formation from proximal to distal end with cut line 53mm and staple line 57mm on either side, linear cutter green reload 55mm, with tissue retaining pin to ensure tissue does not milk out during firing. cut line 53mm and staple line 57m, linear cutter blue reload 55mm, with tissue retaining pin to ensure tissue does not milk out during firing. cut line 53mm and staple line 57mm, linear cutter white reload 55mm, with tissue retaining pin to ensure tissue does not milk out during firing. cut line 53mm and staple line 57mm, linear cutter blue reload 75mm, with tissue retaining pin to ensure tissue does not milk out during firing. cut line73mm and staple line 77mm, linear cutter green reload 75mm, with tissue retaining pin to ensure tissue does not milk out during firing. cut line 73mm and staple line 77mm, linear cutter white reload 75mm, with tissue retaining pin to ensure tissue does not milk out during firing. cut line 73mm and staple line 77mm, linear cutter gun 100m blue, with cam mechanism to ensure two rows of uniform b shape staple formation from proximal to distal end with cut line 98mm and staple line 102mm on either side, linear cutter blue reload 100mm, with tissue retaining pin to ensure tissue does not milk out during firing. cut line98mm and staple line 102mm, linear cutter green reload 100mm, with tissue retaining pin to ensure tissue does not milk out during firing. cut line 98mm and staple line 102mm, linear cutter white reload 100mm, with tissue retaining pin to ensure tissue does not milk out during firing. cut line 98mm and staple line 102mm, tonsillectomy set ( 1 sets containing all sixteen tems ) , oesophagoscopy set ( 1 sets containing all ten items ) , mastoidectomy surgery set ( 1 sets containing all seventeen items ) , middle ear surgery set ( 1sets containing all twenty six items ) , fess surgery ( 1 sets containing all ninteen items ) , fibrin sealant with thrombin and aprotin 4ml, fibrin sealant with thrombin and aprotin 2ml, hemostatic matrix with gelatine and thrombin 5ml, non adhesive hydrocellular foam silvedressing 20cm x 20cm, non adhesive hydrocellular foam dressing 10cm x 10cm, purilon gel, rinneys disposable clips, 8 0 ( 0.4 metric ) 6mm 3 / 8 circle spatulatedmicropoint double sterilized surgical needle suture ( monofilament polyamide black ) , 10 0 ( 0.2 metric ) 6mm 3 / 8 circle spatulatedmicropoint double sterilized surgical needle suture ( monofilament polyamide black ) 38cm boxes ( cutting edge ) , 5 0 ( metric ) absorbable surgical suture 9synthetic ) surgical needle suture ( braided coated polyglactin ( cutting edge ) 910 violet ethiprime 16mm 3 / 8 circle boxes, 6 0 ( 0.7metric ) absorbable surgical suture 9synthetic ) surgical needle suture ( braided coated polyglactin spatulatedmicropoint– ( cutting edge ) double 45cm oph boxes, recombinant factor ix, aicc ( anti inhibitor coagulation complex ) 500iu, scalp vein set sterile size 20, scalp vein set sterile size 24, scalp vein set sterile size 26, blood collection tube ( vacutainer plain ) 4ml, blood bags 100ml plain ( paediatric blood bags ) without needle and anti cogulent, neonatal digital thermometer, disposable elbow size : long gloves, cleanig rubber gloves long size, disposable baby diapers, disposable surgeons gown with reinforcement softesse medical fabric xl, disposable surgeons gown with reinforcement softesse medical fabric large, umbilical cord clamp, pressur line 50cms, pediatric dripset with meassuring volume chamber, nebulization mask with chamber pediatric, urine collection bag pediatric, 3 mt cable, suction tube for suction apparatus with canuala, low adherent wound dressing ( 20cm x 10cm ) , silicon gel sheet 12cm*6cm, moisture responsive catheter dressing for peripheral and central lines ( 6cm x 7cm ) , moisture responsive catheter dressing for peripheral and central lines ( 7cmx9cm ) , an absorbent, low adherent post operative dressing with adhesive coated backing material ( 6cm x 8.3cm ) , an absorbent, low adherent post operative dressing with adhesive coated backing material ( 15cm x 8cm ) , an absorbent, low adherent post operative dressing with adhesive coated backing material ( 10cm x 8cm ) , an absorbent, low adherent post operative dressing with adhesive coated backing material ( 20cm x 10cm ) , an absorbent, low adherent post operative dressing with adhesive coated backing material ( 25cm x 10cm ) , an absorbent, low adherent post operative dressing with adhesive coated backing material ( 30cm x 10cm ) , waterproof & bacteria proof post operative film dressing for post surgical wounds & minor trauma wounds ( 6.5cm x 5cm ) , waterproof & bacteria proof post operative film dressing for post surgical wounds & minor trauma wounds ( 9.5cm x 8.5cm ) , waterproof & bacteria proof post operative film dressing for post surgical wounds & minor trauma wounds ( 15.5cm x 8.5cm ) , waterproof & bacteria proof post operative film dressing for post surgical wounds & minor trauma wounds ( 20cm x 10cm ) , waterproof & bacteria proof post operative film dressing for post surgical wounds & minor trauma wounds ( 25cm x 10cm ) , waterproof & bacteria proof post operative film dressing for post surgical wounds & minor trauma wounds ( 30cm x 10cm ) , dosiflow ( ivf regulator ) , ecg leads paediatric, umbalical venous catheter ( paediatric ) size 3.5, umbalical venous catheter ( paediatric ) size 4, umbalical venous catheter ( paediatric ) size 5, baby wrist band, mother wrist band, central venous catheter 22 gauge x 8cms single lumen, central venous catheter 22 gauge x 10cms single lumen, central venous catheter 4.5 fr. x 6cms triple lumen, central venous catheter 5.5 fr. x 8cms double and triple lumen, centraline triple lumen 7frh, , centraline triple lumen 6.5frh, , centraline triple lumen 7.5frh, , urine albumin glucose strips, urine glucose strips, urine ketones glucose bodies strips, nel catheter no 16, urine pregnacy test kit, dengue kit iggigm, sulphosalicylic acid 100g powder, dropkin solution 1l, hb whatsman filter paper ( high quality ) for hb testing, sanitory napkins large, sanitory napkins xl, bed side lockers, delivery cot 18 gaze, revolving stools, steel racks 5 steps, episiotomy scissors, ovum forceps, uterine sound, sim speculum, vulcellum, curretor, chittal forceps, chittal forceps container, straight scissors, drugs trolley ( 2 steps stainless steel ) , oxygen cylinder trolley, infusion pump, disposable ventilator tubing circuit ( drager ) , flow sensor ( drager ventilator ) , bubble cpap ( fisher & paykel ) , bubble cpap nasal tubing 50mm ( fisher & paykel ) , bubble cpap nasal tubing 70mm ( fisher & paykel ) , bubble cpap bonnet all 4 different sizes ( fisher & paykel ) , bubble cpap nasalmask all 3 different sizes ( fisher & paykel ) , bubble cpap nasal prongs all 5different sizes ( fisher & paykel ) , hfnc canula s, m, l ( fisher & paykel ) , niv mask for paediatric xs, s ( fisher & paykel ) , ventilator circuit dual heated ( fisher & paykel ) , dual heated wire adapter for humidifier ( fisher & paykel ) , temparature probe for humidifier ( fisher & paykel ) , fanem cpap circuit neonatal with prongs 00 disposable, fanem cpap circuit neonatal with prongs 01 disposable, hose heater wire adaptor ( fisher & paykel ) for ventilator, humidifier water wire adaptor ( fisher & paykel ) , humidifier heater wire adaptor ( fisher & paykel ) for ventilator, phoenix tempreture probe for using warmers, reusable circuit ( fisher & paykel ) for maquet neonatal, reusable circuit ( fisher & paykel ) for ventilator drager ( neonatal ) , reusable circuit ( fisher & paykel ) for oricare ( pediatric ) , reusable circuit for ventilator bellavista ( neonatal ) , three bucket system with container with mop ( cleaning ) , auttoclave machine medium, bleeching powder bag 5kgs, x ray view box, instrumental trolly, central line set anasthesia, cot with i v stand, icu cot with remote ( pediatric ) , fumigation machine for ot, defibrilator for ot, hme filter, demineralised water 5ltr can, ot shield solution for fumigation 1 ltr, biofix spray, pampsmear kit, iud with progestogen, speculums and retractors, simple fetal doppler, nst machine paper, nst machine, vaginal hysterectomy & lavh pack, lscs & abdominal hysterectomy pack, hysteroscopy pack, normal delivery pack, flowmeter, gluco meter, venture mask, sputum cup, bed pan, abg gas cylinder, surgical spirit 5ltrs can, tailor scissor 10, rubber gloves red, potassium permanganate crystals 400gms, oxygen prang, infraredthermometer, i.c.d tube no. 28, i.c.d tube no. 32, hight measuring tape, paper roll for opticca abg machine...

Department Of Commerce And Industry - Karnataka

33868626 supply of improved tool kits to deputy director kvi chickmagalur , hacksaw, 4 cutting machine with blade, gurmal, pick axe, hair cutting chair, iron pan / fiber pan, cutting player, water spray, power opertator blower iso, iron / fibre pan, mirror, flat file, karani steel medium, sledge hammer, sledge hammer, karani steel for design finishing, crow bar, gi / plastic bucket, sledge hammer, spade or mumty, gara chakka, hair brush, aluminium level bar, steel table, mortise chisel, try square, teeth scissor, hair dressing machine or hair clipper, karani steel small, plump bob big, barber combs, tongs round, cold chisel flat, screw driver, anvil, power drilling machine, measuring tape steel, steel tape, cross pane hammer, plastic pipe, iron pan / fiber pan, plastic / fiber baskets with handle unbreakable, claw hammer, dhummous, barber scissor, firmer chisel, hand saw, iron jack plane iso certified, charging hair trimmer, flat chisel, karani steel big, plastic bucket, tool kit box, cold chisel, flat chisel, tool kit box, try square, steel tape, tool kit box / bag, razor set, measuring tape, aluminium level bar, shaving brush, spring divider, electrical clipper, 4 cutting machine iso certified width blade, center punch, ms ring, steel foot rule, triangular file, measuring try square, tongs flat, hand hacksaw with blade, brass iron box, tin cutter, plastic mug, ball pean hammer, sledge hammer, sponj, t bar clamp, apron, hair drier, spirit level...

South Western Railway - Karnataka

33524325 auction sale of [ pl no. 98050126 ] scrap cond. / released / unserviceable ms scrap such as cbc coupler bodies, angels channels, signal rods, dash pot, yokes, draft gears sets, ms sheets, winch for lc gate, lever lock, lever rods, pull rods, suspension tube, bracket cl, housing axle bearing, chequered plates, cbc operating handle, rail cutter, rel hook, anti roll bracket, dradger drum, ms stool, centring disc, ms liners, center pivot washer, brake shoe head, center pivot ring, side frame key, adopter narrow jaw, anti roll bar, rail dolly, fish bolts & nuts, wear plate, adopter wide jaw, suspension rods , equalizing stay, erc clips, wagon doors, rail flange, chain hook, rotary shield with bearings, sab parts, ls beam, hangers, brake levers, brake hangers, ms plates of elastomeric pad, adapter broken, center pivot top, anvil, workdout sab, gib crane, cr reservoir and bracket, plate screws, knuckle, brake cylinder fabricated test rig, gear wheel, anchor link, cash chest, brake beam cut parts, axle box housing, bearing plates, rivette, chirr plate, ms bed plate, ms guage tie plate, structure bar, ms tie plates, slide chaires, ls beam, center pivot, air brake cylinder, knuckle, adopter narrow jaw, tamping tools, track machine parts, brake shoe head, locking plate, long pull rod, operating handle, cbc lock, cbc yoke, lower spring sheet beam, center beams, center pivot washer, screw couplings, lower spring sheet beam, center beams, cut pieces of pipes, buffers, buffer plungers, buffer casings, draw gear hooks, silent blocks, brake cylinder, cut off sheets, collars, iron rods, face plate, bolt & nut stresses, and other items coming under ms scrap on as is where is condition available under the custody of dms 08 ward ap. note: pick and choose of the material are not allowed loading to be started from one end and to be ended on other end only. ( cutting permitted if required ) ( loc:bin no 0124 at scrap yard ) special conditions: during delivery, selection, sorting, rejection of part or partial lot will not be entertained. picking, disturbing of other nearby lots, undefined materials near lot or under lot formation materials will not be entertained. purchaser may survey materials before bidding into auction, after successful bid further queries or objection will not be entertained....

Urban Development Department - Karnataka

33193402 bids are invited for mitutoyo dial snap gauge without dial 125 to 150 mm , mitutoyo bore gauge 50 to150mm with dial l. c 0.001mm , mitutoyo feeler gauge 0.05 to 1.00 mm l.c 0.05 mm , indian make steel setting ring 130 mm dia , mitutoyo id micrometer 125 to 150 mm , mitutoyo make outside micrometer125 to 150 mm lc 0.01 mm ,mitutoyo digital outside micrometer withinterchangeable anvil type 0 to 150 mm , mitutoyom6 interchangeable anvil 0 to 150mm model length125 to 150 mmsupply of measuring instruments for measuring the total quantity : 16...

Department of Defence Production - Karnataka

33175583 bids are invited for 330511230190 digital abs inside point jaw caliper0,80 , 330511300127 point jaw type inside caliper 30 300mm , 330510930169 pcd digimatic vernier caliper 0 300mm , 330510550123 digital depth gauge 0 200mm caliper , 330010690111 digital depth gauge 0 300mm caliper , 330511280145 digital micrometer 0 25 mm ball type , 330511290136 digital micrometer 25 50 mm , 330010920195 thickness gage dgtl ext ball probe0 20mm , 330010990132 thickness gage dgtl ext ballprobe0 30mm , 330511250172 abs digimatic caliper cd ax apx series , 330511170147 bore gauge 50 150mm ,330511180138 digital blade micro meter 0 25 mm ,330511210111 digital abs borematic internal set 12 ,330511260163 tube micrometer cylindrical anvil ,330511240181 digital spline micrometer ip65 0 25mm, 3 total quantity : 22...

Rail Wheel Factory - Karnataka

33062853 supply of rwf drawing items 06 itemsrwf drawing items 06 items,roof lift gear arrangement as per assembly drg.no.711200111530 consisting of item no 1,4,5,6,7,8,11,12,13,15,16,18,20,21,& 22. the quantities indicated in the assembly drg.no.711200111530,against each item is for one set only. the part drawings are 711200112090 711200110130,711200110140,701200111420,711200111540,701200111210,701200111430,711200111230,701200111510,711200111500,701200111470 & 701200111490. , pulley 9 for roof lift mechanism of arc furnace to rwf drawing 721200110150 note: the supply shall accompany material test certificate for item no 1 & 2 , ball screw rod assembly for z axis consisting of screw rod item no 1 and nut item no 2 ( one number each ) to rwf drg no:722470310230. , insulator for spurue wash torch to wap drg.no.702490310110. note: warranty shall be indicated. , cage for filter bag of cope and drag cleaner dust collector as per wap drg no 702900510080. , anvil block for stamping machine to rwf drg.no.722490210120 => limited...

South Western Railway - Karnataka

32907595 auction sale of [ p l no. 98050126 ] scrap cond. / released / unserviceable ms scrap such as cbc coupler bodies, released crawler chain of t28, angels channels, signal rods, dash pot, yokes, draft gears sets, ms sheets, winch for lc gate, lever lock, lever rods, pull rods, weighing scale base, suspension tube, bracket cl, housing axle bearing, chequered plates, cbc operating handle, rail cutter, rel hook, anti roll bracket, dradger drum, ms stool, centring disc, ms liners, center pivot washer, brake shoe head, center pivot ring, side frame key, adopter narrow jaw, anti roll bar, rail dolly, fish bolts & nuts, wear plate, adopter wide jaw, suspension rods , equalizing stay, erc clips, wagon doors, rail flange, chain hook, rotary shield with bearings, sab parts, ls beam, hangers, brake levers, brake hangers, ms plates of elastomeric pad, adapter broken, center pivot top, anvil, workdout sab, gib crane, cr reservoir and bracket, plate screws, knuckle, brake cylinder fabricated test rig, gear wheel, anchor link, cash chest, brake beam cut parts, axle box housing, bearing plates, rivette, chirr plate, ms bed plate, ms guage tie plate, structure bar, ms tie plates, slide chaires, ls beam, center pivot, air brake cylinder, knuckle, adopter narrow jaw, tamping tools, track machine parts, brake shoe head, locking plate, long pull rod, operating handle, cbc lock, cbc yoke, lower spring sheet beam, center beams, center pivot washer, screw couplings, lower spring sheet beam, center beams, cut pieces of pipes, buffers, buffer plungers, buffer casings, draw gear hooks, silent blocks, brake cylinder, cut off sheets, collars, iron rods, face plate, bolt & nut stresses, and other items coming under ms scrap on as is where is condition available under the custody of dms 08 ward ap. ( loc:bin no 0137 at scrap yard ) special conditions: during delivery, selection, sorting, rejection of part or partial lot will not be entertained. picking, disturbing of other nearby lots, undefined materials near lot or under lot formation materials will not be entertained. purchaser may survey materials before bidding into auction, after successful bid further queries or objection will not be entertained....

South Western Railway - Karnataka

32775630 supply of lock bolting equipment model no 12142 make huck, for 1 3/8 installation tool. 1) supply and fitment of item anvil part no 112719 g 400015052 and cylinder body note: warranty is required as per irs conditionslock bolting equipment model no 12142 make huck, for 1 3/8 installation tool. 1) supply and fitment of item anvil part no 112719 g 400015052 and cylinder body note: warranty is required as per irs conditions,lock bolting equipment model no 12142 make huck, for 1 3/8 installation tool. 1) supply and fitment of item anvil part no 112719 g 400015052 and cylinder body note: warranty is required as per irs conditions...

Department Of Commerce And Industry - Karnataka

32674949 supply of tools to deputy director kvi, mangaluru. , air blower ( power operated ) , aluminum level bar, auto jack 1no, carpentry chisel 0.5, carpentry chisel 1.25, carpentry chisel 3.0, chisel, cold chisel, cut type spanner 1set, cutting plier, cutting plier 1no, drill bit set, fiber pane 2 nos, g i bucket, karani big, karani medium, karani small, karni designing / finishing, measuring tape, measuring tape ( fm 3 meter 16 ) , multipurpose screw driver set, mumty spade, pickaxe with handle 2.7 kg, plumb bog, power operated angle grinder machine, power operated angle grinder machine 1no, power operated impact drilling machine, power operated cutting machine, power operated cutting machine, power operated cutting machine, power operated impact drilling machine, rinch spanner 10, ring spanner 1 set, screw driver with tester, sewing machine ( foot machine ) , sledge hammer, sledge hammer, sledge hammer, sledge hammer, sludge hammer 1.5 lb wooden handle, spirit level, tongs, try square, water level tube, wax bag, anvil 20 kg...

Bangalore Medical College And Research Institute - Karnataka

32644203 for the purchase for consumables to bmcri for the purchase for consumables to bmcri , 1 perforated foam dressing (26 x 15 x 3cm), 2 sheets of v.a.c. drape, 1 t.r.a.c. pad with connector, 1 disposable ruler.,10 x 10 cm advance wound dressing with bioactive microfiber gelling technology, non woven highly absorbent, haemostatic gelling fiber composed of 100% natural biopolymer with a net positive charge, gamma sterilized & moisture proof packing. manufactured in india gmp, iso 13485 & ce certified.,10.0 polypropylene non absrobable surgical suture usp (0.2metric) 30 cm (12) double spatula model : aurolene,10.0 synthetic non absorbable monofilament polyamide black surgical suture size 10.0 with 6mm 3/8 circle micro point spatulated 38cm double arm suture,100 ml advanced wound irrigation solution composed of protonated bioactive biopolymer, a wound irrigation solution composed of bioactive, natural biopolymer with net positive charge, natural biopolymer with non protein composition, non silver, non iodine wound irrigation solution with inherent antimicrobial properties (minimum 4 log reduction), ph not more than 6.0 & proven biocompatibility,1000 ml contaniar with sensa trac pad withtubing prevent leakage and blockage with gel (containing sodium polyacrylate to covert exudate into gel, so no cross contamination) and clamp and connector.,15 x15 cmadvance wound dressing with bioactive microfiber gelling technology, non woven highly absorbent, haemostatic gelling fiber composed of 100 natural biopolymer with a net positive charge, gamma sterilized & moisture proof packing.,2 layer polyurethane ester foam dressings size (11 x 8 x 1.8cm) with spiral cut sheet use for instillation (not irrigation),trac pad with 5 lumen tubing set, 2 drape sheets, 2 cavilon packet,,2 layer polyurethane ester foam dressings size (17 x 15 x 1.8cm) with spiral cut sheet use for instillation (not irrigation), set, 2 drape sheets, 1 disposable ruler,,2 layer polyurethane ester foam dressings size (25 x 15 x 1.6cm) with spiral cut sheet use for instillation (not irrigation), duo pad with 5 lumen tubing set supports easy clear purge technology, 5 sheets of vacadvanced drape, 4 packets of cavilon no sting barrier film, 1 disposable ruler,,20 x30 cm advance wound dressing with bioactive microfiber gelling technology, non woven highly absorbent, haemostatic gelling fiber composed of 100 natural biopolymer with a net positive charge, gamma sterilized & moisture proof packing.,2710 scleral buckle,276 scleral buckle,279 sclera buckle,281 scleral buckle,2 octyl cyanoacrylate liquid topical skin adhesive packaged within a pen applicator along with a self adhering mesh of 22cm / skin adhesive,2 propanol 40gm, 1 propanol 22gm equivalent to 69 v/v alcohol 1x250ml,3 layer foam dressing used for instillation therapy size (18 x 12.5 x 0.8cm, 18 x 12.5 x 1.6cm, contact layer 18 x 12.5 x 0.8cm w and 1cm circular holes), 1 vac vera trac pad with 5 lumen tubing set, 4 sheets of v.a.c. advanced drape, 4 packets of cavilon no sting barrier film, 1 disposable ruler.,3 layer foam dressings used for instillation theraphy size (25.6 x 15 x 0.8cm, 25.6 x 15 x 1.6cm, contact layer 25.6 x 15 x 0.8cm and 1cm circular holes), 1 vac vera trac duo pad with 5 lumen tubing set, 6 sheets of vac advanced drape, 5 packets of cavilonno sting barrier film, 1 disposable ruler.,34 cm flowable gelatin hemostatic matrix endoscopic applicator,4.0 synthetic absorbable sutures antibacterial, triclosan coated polyglactin 910 size: 4 0 with 20mm 1/2 circle round body needle, suture length 70 cm,4.0 synthetic non absorbable polybutylate coated polyster braided suture size: 4 0 with 8mm, 1/4 circle spatulated micropoint needle, suture length 76cm green braided suture,4.0 synthetic non absorbable polypropylene sutures size: 4 0 with 16mm 3/8 circle cutting needle, sutures length 70 cm,45 x 45 cm advance wound dressing with bioactive microfiber gelling technology, non woven highly absorbent, haemostatic gelling fiber composed of 100 natural biopolymer with a net positive charge, gamma sterilized & moisture proof packing.,5.0 synthetic absorbable sutures antibacterial, triclosan coated polyglactin 910 size: 5 0 with 16mm 1/2 circle oval round body needle, suture length 45 cm suture,50 gms advanced wound gel composed of a bioactive biopolymer with net positive charge, a wound gel composed of bioactive, natural biopolymer with strong cationic charge, natural biopolymer with non protein composition, non silver, non iodine wound gel with inherent antimicrobial properties (minimum 4 log reduction) and hemostatic properties & proven biocompatibility,500 ml contaniar+a2 (sterile) with sensa trac pad with 5 lumen tubing prevent leakage and blockage with gel (containing sodium polyacrylate to covert exudate into gel, so no cross contamination) and clamp and connector.,5mm absorbable polydioxanone strap mesh fixation device with 25 straps single loaded deployment strap length of 7.2mm with 2 point fixation auto lock handle and low strap indicator strap,6.0 non absorbable surgical suture sterilized monofilamant polypropylene 70cm round body 3/8 circle 11mm double needle size: 6.0,6.0 synthetic absorable surgical suture polyglactin 910 size 6 0 with 8mm 1/4 circle spatulated micropoint double needle(0.7 metric), suture length 45cm,6.0 synthetic non absorbable polypropylene sutures size: 6 0 with 12mm 3/8 circle reverse cutting needle, sutures length 45 cm,8.0 synthetic non absorbable monofilament polyamide black surgical suture size 8.0 with 6mm 3/8 circle spatulated micro point double needle with suture length 38cm,9.0 synthetic non absorbable monofilament polyamide black surgical suture size 9.0 with 6.5mm 3/8 circle micro point spatulated 38cm double arm suture,a c i o l,a gentle hydrogel constisting of natural ingredients such as purified water, sodium carboxy methylcellulose and calcium alginate without any additives, used for wound that need effective and gentle autolytic debridement of necrotic tissue. 1x15gm,a gentle hydrogel constisting of natural ingredients such as purified water, sodium carboxy methylcellulose and calcium alginate without any additives, used for wound that need effective and gentle autolytic debridement of necrotic tissue. 1x8gm,a post operative dressing, transparent , highly conformable, bacteriaproof, waterproof polyurethane film dressing with a non adherent absorbent pad composing of viscose & polyester. 30cmx10cm,a post operative dressing, transparent , highly conformable, bacteriaproof, waterproof polyurethane film dressing with a non adherent absorbent pad composing of viscose & polyester. 15.5cmx 8.5cm,a post operative dressing, transparent , highly conformable, bacteriaproof, waterproof polyurethane film dressing with a non adherent absorbent pad composing of viscose & polyester. 20cmx 10cm,a post operative dressing, transparent , highly conformable, bacteriaproof, waterproof polyurethane film dressing with a non adherent absorbent pad composing of viscose & polyester. 25cmx10cm,a post operative dressing, transparent , highly conformable, bacteriaproof, waterproof polyurethane film dressing with a non adherent absorbent pad composing of viscose & polyester. 6.5cmx5cm,a post operative dressing, transparent , highly conformable, bacteriaproof, waterproof polyurethane film dressing with a non adherent absorbent pad composing of viscose & polyester. 9.5cm x 8.5cm,a sterile amorphous hydro gel with a unique applipak delivery system consisting of carboxy methyl cellulose & propylene glycol which promotes rapid but gentle debridement of necrotic tissue. 15gm applipak,a sterile amorphous hydrogel with a unique applipak delivery system consisting of carboxy methyl cellulose & propylene glycol which promotes rapid but gentle debridement of necrotic tissue. 25gm applipak,a sterile amorphous hydrogel with a unique applipak delivery system consisting of carboxy methyl cellulose & with colloidal silver,abdominal binder large,abdominal binder medium,abdominal drain kit 28g,abdominal drain kit 32g,absolute alcohol,absorbable gelatin based topical absorbable flowable hemostat with 6cc syringe pre filled with hemostatic matrix. with 14.3 cm white applicator tip & 14.6 cm blue flexible applicator tip,absorbable gelatin sponge usp 70mm x 50mm x 10mm,absorbable gelatin sponge usp 80mm x 50mm x 10mm x, approx or 70 mm x 50 mm x 10mm,approx [ 8x5x1cm],absorbable hemostat powder microporous polysaccharids hemosphere with applicator in one single sterile,absorbable surgical suture sterilized chromic catgut 1/2 circle round body 100cm size: 2,,absorbable surgical suture sterilized chromic catgut size: 1, 1/2 circle round body 100cm, 30mm,absorbable surgical suture sterilized chromic catgut size: 1 0, 1/2 circle round body 76 cm, 40mm,absorbable surgical suture sterilized chromic catgut size:4 0, 16mm r/b 3/8 circle 76cm,absorbable unidirectional barbed device, symmetric anchoring pattern with 5 anchors/cm, triclosan coated polydioxanone, size 1, 40mm 1/2 circle reverse cutting needle,suture length 60cm,absorbable unidirectional barbed device, symmetric anchoring pattern, triclosan coated polydioxanone, size 1 with 1/2 circle taper point,ctx 48mm needle, suture length of 45cm suture,absorbable unidirectional barbed device, symmetric anchoring pattern, triclosan coated polydioxanone, size 1 0 with 1/2 circle taper point,ct 1 with 36mm needle, suture length of 45cm / suture,absorbable unidirectional barbed device, symmetric anchoring pattern, triclosan coated polydioxanone, size 2 0, with 1/2 circle taper point sh with 26mm needle, suture length of 45 cm / suture,absorbable unidirectional barbed device, symmetric anchoring pattern, triclosan coated polydioxanone, size 3 0, 26mm 1/2 circle taper point needle, 45 cm / suture,absorbable unidirectional knotless tissue control device, spiral anchoring pattern with anchors at 15 degrees and 20 anchors/inch with an adjustable fixation loop at one end of the suture, triclosan coated poliglecaprone 25 with 24mm precision point, 3/8 reverse cutting needle with suture length 60cm size: 3 0,absorbable unidirectional knotless tissue control device, spiral anchoring pattern with anchors at 15 degrees and 20 anchors/inch with an adjustable fixation loop at one end of the suture, triclosan coated poliglecaprone 25 with 24mm precision point, 3/8 reverse cutting needle with suture length 45cm size: 3 0,absorbable unidirectional knotless tissue control device, symmetric anchoring pattern with 5 anchors/cm , triclosan coated polydioxanone with fixation tab , size 2 0, 36mm 3/8 circle taper point needle, suture length 30cm,absorbable unidirectional knotless tissue control device, symmetric anchoring pattern with 5 anchors/cm , triclosan coated polydioxanone with fixation tab , size 3 0, 17mm 3/8 circle reverse cutting needle, suture length 15cm,absorbent cotton roll 500gm,ace medispacer,acetic acid,ackarmann liga clips large (red),actin pancreatitis test,action fs 2 ml,activated charcoal,adherant foam dressings comprised of protective poly urethane top layer, soft foam, stich bonded hydrofiber with 1.2 impregnated ionic solver & silicone border used as primary and secondary dressings for heel size: 17.5 x 13.5 cm,adherant foam dressings comprised of protective poly urethane top layer, soft foam, stich bonded hydrofiber with 1.2 impregnated ionic solver & silicone border used as primary and secondary dressings for sacrum size: 20 x 17 cm,adherant foam dressings comprised of protective poly urethane top layer, soft foam, stich bonded hydrofiber with 1.2 impregnated ionic solver & silicone border used as primary and secondary dressings size: 10x10 cm,adherant foam dressings comprised of protective poly urethane top layer, soft foam, stich bonded hydrofiber with 1.2 impregnated ionic solver & silicone border used as primary and secondary dressings size: 17.5 x17.5 cm,adherant foam dressings comprised of protective polyurethane top layer, soft foam, stich bonded hydrofiber with 1.2 impregnated ionic solver & silicone border used as primary and secondary dressings size: 21 x 21 cm,adhesive four layer foam & hydrofiber dressing sacrum, with viral, bacterial barrier, polyurethane top layer with 1.2 impregnated ionic silver & gel forming technology, ce , iso & fda approved 20x16.9cm,adhesive tape 10 cm x 10mtr,adult 02 mask,adult diapers,adult nebulization mask,airvo 2 circuiit,airvo 2 nasal cannula all size,alcian blue staining kit,alcoholic handrub with moisturiser chlorhexidine gluoconate 2.5 v/v. ethanol 70% v/v,aluminum alum,aluminum alum,ambu bag (adult) silicon full set,ambu bag (pediatric) silicon,ambu bag (pediatric) silicon full set,aminiotic membrane dry,aminiotic membrane wet,ammonia solution 5 lit can,ammonium sulphate 5.5 kilogrm,amorphous silver and silk protein hydrogel wound dressing 100gm,amorphous silver and silk protein hydrogel wound dressing 25gm,amorphous silver and silk protein hydrogel wound dressing 50gm,an alcohol free liquid barrier film containing acrylate terpolymer, polyphenylmethylsiloxane, hexamethyldisoloxane and isooctane which dries quickly to form a breathable, transparent, hypoallergenic, non cytotoxic coating to protect damagedor intact skin from friction, moisture, shear, bodily fluids, incontinence and adhesive trauma,an post operative dressing made of low adherent, absorbent pad of viscose fleece & acrylic fibres with adhesive coated backing material made up of spun lace polyester which is highly conformable & comforting. 15cm x 8cm,an post operative dressing made of low adherent, absorbent pad of viscose fleece & acrylic fibres with adhesive coated backing material made up of spun lace polyester which is highly conformable & comforting. 20cmx10cm,an post operative dressing made of low adherent, absorbent pad of viscose fleece & acrylic fibres with adhesive coated backing material made up of spun lace polyester which is highly conformable & comforting. 25cm x 10cm,an post operative dressing made of low adherent, absorbent pad of viscose fleece & acrylic fibres with adhesive coated backing material made up of spun lace polyester which is highly conformable & comforting. 30cm x 10cm,an post operative dressing made of low adherent, absorbent pad of viscose fleece & acrylic fibres with adhesive coated backing material made up of spun lace polyester which is highly conformable & comforting. 6cm x 8.3cm,an post operative dressing made of low adherent, absorbent pad of viscose fleece & acrylic fibres with adhesive coated backing material made up of spun lace polyester which is highly conformable & comforting. 10cm x 8cm,anaesthetic ether 250gms,anatomical reuisable (silicon) face mask size: 2,anatomical reusable (silicon) face mask size: 3,anatomical reusable (silicon) face mask size: 4,aniridia iols,anti a1 lection 5ml,anti hemolan globulin,antimicrobial five layered highly absorbent foam dressing with activated carbon and sliver content 1.2mg/cm2, active release for 168hrs (7 days) with self adherent borders with polyurethane backing film as water, bacterial and viral barrier with soft silicone adhesive technology/ safetac technology. usage upto 7 days. size 10x20 cm,antimicrobial five layered highly absorbent foam dressing with activated carbon and sliver content 1.2mg/cm2, active release for 168hrs (7 days) with self adherent borders with polyurethane backing film as water, bacterial and viral barrier with soft silicone adhesive technology/ safetac technology. usage upto 7 days. size 10x10cm,antimicrobial five layered highly absorbent foam dressing with activated carbon and sliver content 1.2mg/cm2, active release for 168hrs (7 days) with self adherent borders with polyurethane backing film as water, bacterial and viral barrier with soft silicone adhesive technology/ safetac technology. usage upto 7 days. size 12.5x12.5 cm,antimicrobial foam dressing for acute and chronic wound 17.5x17.5cm ag,antimicrobial foam dressing for acute and chronic wound20x50cm ag,antimicrobial foam dressing for acute and chronic wounds 20x20 cm ag,antimicrobial foley catheter size6 fr to 26 fr,antimicrobial incise drape ez,antimicrobial incise drapes medium incise 66cmx45cm,antisera h 10x10ml,aqua, peg 40 hydrogenated castor oil, glycerin,arginine peel 20,arterial blood with 23.5iu/ml dry lithium heparin syringes,arterial line cannulas,autoclave indecator signal paper 3m,available iodine 1 w/v, in water soluble base (contains sodium iodide and surfactants),b p blade surgical size: 10 isi,b p blade surgical size: 11 isi,b p blade surgical size: 15 isi,b p blade surgical size: 20 isi,b p blade surgical size: 21 isi,b p blade surgical size: 22 isi,b p blade surgical size: 23 isi,b p blade surgical size: 24 isi,bacillocid special each 100gm contains: 1.6 dihydroxy, 2 5 dioxahexane 11.2g glutaraldehyde 5.0 g benzalkonium chloride ip 5.0 g alkyl urea derivative 3.0g,bacilloid special each 500ml 100gm contains: 1,6 dihydroxy 2,5 dioxahexane 9 chemically bound formaldhehyde) 11.2gms glutaraldehyde 5.0 gms benzalkonium chloride ip 5.0 gms,bacillol spray 250ml each 100gm contains: ethanol 10gm 2 propanol 9gm 1 propanol 6gm,bacilocid extra,bacilol cloth thans,bact alert adult bottle pf plus 100 test,bact alert paediatric bottle pf plus 100,bag (adult) silicon,bain circuit (adult open bain system with t apl valve),bain circuit (adult),bain circuit (pediatric),bains circuit breathing system disposable,band aid (round),band aid round hypoallergenic & antiseptic single use only 100strips of 25mm round ip 05 w/w,bandage cloth schedule f2 (than 100cm x 20 meter),barbour silk thread no. 60 roll,barrier dressing silvaline 40x40cm,bcl6 kit,benedict reagent,bidirectional pdo 1/2 circle, taper point, mh with 36mm needle, suture length 30cm x 30cm size: 1 0 / suture,bidirectional pdo 1/2 circle, taper point, mo 4 with 36mm needle, suture length 36cm x 36cm size: 1 / suture,biopsy bottle,blood urea kits (erba) 20ml,blood glucose test strips 50s,blood lancets,blood transfusion set,blue tips,bone cutters,border sacrum dressing 18x18 with soft silicone self adhesive,bougie (airway equipment),bovine serum albumin,bp apparatus,breathable, transparent self adhesive collagen dressing size: 05x05,breathable, transparent self adhesive collagen dressing size: 10x25,breathable, transparent self adhesive collagen dressing size: 15x30,breathable, transparent self adhesive collagen dressing size: 20x20,b scan gel 500 ml,burette infusion set,c arm cover,c 15kit,c3 f8 (octafluoroprpane) 99.95% pure gas,ca 125 kit,ca clean 1x50ml,ca clean 2 500ml,cal ret,calcium alginate dressing with hemostatic and exudate management capability composed of 80 calcium & 20 sodium lons with guluronic & mannuronic acid in the ratio of 2:1 size: 10x20cm,calcium alginate dressing with hemostatic and exudate management capability composed of 80 calcium & 20 sodium lons with guluronic & mannuronic acid in the ratio of 2:1 size: 5x5cm,calcium chloride 15ml,canister 500ml,canister free 5 layer hydrophillic npwt silver dressing 15x30cm pack of 5 compatible,canister free 5 layer hydrophillic npwt silver dressing 15x35cm pack of 5 compatible,canister of 300 ml each (containing sodium polyacrylate to covert exudate into gel, so no cross contamination) with at least 5 or more lumens tube to prevent leakage and blockage,,cannula fixator transperent dressing as per nabh big size,cannula fixator transperent dressing as per nabh medium size,cannula fixator transperent dressing as per nabh small size,cannula fixator,carbol fuchion 100ml bottel,carbol fuchsion basic,cassette with instillation tubing and 38mm spikeable cap adaptor.,catheter mount collaspsible,cautery pencil,cautery plates,cbd stent 10fr,cbd stent 8fr,cd 117,cd 138,cd 30,cd 33,cd 56,cd 68,cd10,cd15,cd20,cd3,cd34,cd4,cd8,cd99,cea,centella asiatica extract based skin moisturization and antiscar gel30g/ml,cervical collar (hard),chest drain catheter 28 (icd),chest drain catheter 32 (icd),chlorhexide gluconate+cetrimide 1 lit,chlorhexidine gauze dressing,chlorhexidine gluconate 4 w/v 500ml,chloroform 4ltr,chlorthexidine gluconate + cetrimide solution + isopropyle alcohol 7.5 w/v + 15 w/v + 6 to 8 v/v (antiseptic lotion ) (dettol),chlorthexidine gluconate + cetrimide solution + isopropyle alcohol 7.5 w/v + 15 w/v + 6 to 8 v/v 500ml,chocolate agar (for culture) pack of 60,chromic catgut 4.0,3/8 circle cutting , 16mm needle , 76 cm,chromic catgut 5.0 3/8 circle reverse cutting , 12mm needle , 76 cm,citrol 1 1ml,citrol 2 1ml,cling drapes 50s,clinical thermometer,closed adult circuits 1.8 m,closed pediatric circuit 40 (1 m),closed wound suction drain no:10,closed wound suction drain no:12,closed wound suction drain no:14,closed wound suction drain no:16,closed wound suction drain no:18,closed woven bandage sch f ii100cm x 20mtrs,collagen (type 1)particles with mupirocin 2 w/w & metronidazole 1,5ml,collagen sheet in mesh form 10x10cm,collagen sheet in mesh form 10x20cm,collagen sheet in mesh form 15x30cm,collagen sheet in mesh form 20x40cm,collagen sponge 5x 5cm,collagen sponge with gentamycin 10x10cm,coloplast pack of 5.,colostomy bag stoma bag pack of 10,combine spinal epidural 18g/27g with graduation marking,complete ecm (extra cellular matrix )of ovine origin containing 150+healing factors (antimicrobial with ionic silver 0.3%) 1x1,complete ecm (extra cellular matrix )of ovine origin containing 150+healing factors (antimicrobial with ionic silver 0.3%) 2x2,complete ecm (extra cellular matrix )of ovine origin containing 150+healing factors (antimicrobial with ionic silver 0.3%) 4x5,complete ecm (extra cellular matrix )of ovine origin containing 150+healing factors (natural) 1x1,complete ecm (extra cellular matrix )of ovine origin containing 150+healing factors (natural) 2x2,complete ecm (extra cellular matrix )of ovine origin containing 150+healing factors (natural) 4x5,composite light weight mesh made of poliglecaprone 25 and polypropylene usfda approved size 30cm x 30cm,composite light weight mesh made of polyglecaprone 25 and polypropylene size 10cm x 15cm / suture,composite light weight mesh made of polyglecaprone 25 and polypropylene size 15cm x 15cm / suture,composite light weight mesh made of polyglecaprone 25 and polypropylene size 7.6cm x 15 cm / suture,compression bandage size:10cmx4/6mts,conc. carbol fuschin,concentrated sulphuric acid 10kg,congo red staining kit,copolymer of glycolide and e caprolactone 90 120 days size 2 0 unidirectional spiral with 1/2 circle taper point sh 26mm needle suture length 20cm,copolymer of glycolide and e caprolactone 90to120days size 3.0 bidirectional spiral with fs needle suture length 30cmx30cm with leader length 35mm,copper sulphate powder 25kg,cornisol preservative media,corrugated rubber drainage,cotton rolls 500gm,cover slips 22x30mm,22x40mm,cover slips 22x50mm ,25mm,cover slips for glass slide,cover slips pack,cpap bonnet (f&p),cpap circuit(f&p),cpap nasal mask (f&p) all size,cpap nasal tubing (f&p) all size,crepe bandage 10cm x4 mtr,crepe bandage 10cm x6 mtr,crepe bandage 15cm x4 mtr,crepe bandage 15cm x6 mtr,cuff inflator with connecting tube,cutticell 10x10 (dressing) classic bandage,cvp double lumen cathater 7fr,cvp line extension,cvp monometer,cvp set double lumen adult size 14fr,cvp set double lumen adult size 16fr,cvp set double lumen adult size 5 fr,cvp set double lumen adult size 7 fr,cvp set single lumen catheter size 3 fr,cvp set single lumen catheter size 3.5 fr,cvp set single lumen catheter size 4.5fr,cvp set single lumen catheter size 4fr,cvp set single lumen catheter size 5.5fr,cvp set single lumen catheter size 5fr,cvp set single lumen catheter size 7fr,cvp set triple lumen size: 4.5x6 adult size,cvp triple lumen cathater,cyanoacrylate glue,d10 dual program 400test reagent kit reorder pack,d dimer 15 test,dengue kits,dermatome humeca 80d blades,desmin kit,detergent liquid soap solution,diabetes control bilevel,dichloro metaxylenon 1.5%,diclofenac transdermal patches,didecyl dimthyl ammonium chloride 8.7% n alkyl dimethyl bensyl ammonium chloride 8, 19% inert ingredients 83, 11% total 100.00%,digital thermometer,disposable anaesthesia machine closed circuit with bag,disposable baby dipers size 200.10mm base 8.26,disposable biopsy gun should be semi automatic biopsy gun kit with manual advancement which consisting 1g lesser coaxial compatible with trocar sharp stylet, blent tip, 1mm adopter for 10mm penetration through and depth stopper, should have choice of two penetration depth 10mm and 20mm in a same gun, needle thickness should be available in 18g with needle available in the length of 10cm ,16cm, 20cm and 25cm,disposable biopsy gun should be semi automatic biopsy gun kit with manual advancement which consisting 1g lesser coaxial compatible with trocar sharp stylet, blent tip, 1mm adopter for 10mm penetration through and depth stopper, should have choice of two penetration depth 10mm and 20mm in a same gun, needle thickness should be available in 20g with needle available in the length of 10cm and 16cm,disposable biopsy gun should be spring loaded, fully automatic biopsy gun. should have angled sample notch for enhanced needle action. instrument should have a choice of two firing buttons – one on the body and other on the rear end. should have double press cocking mechanism. should have a penetration depth of 22mm. core sample size should be 19mm. the needle thickness should be available in 14g with needle available in the length of 10cm & 16cm,disposable biopsy gun should be spring loaded, fully automatic biopsy gun. should have angled sample notch for enhanced needle action. instrument should have a choice of two firing buttons – one on the body and other on the rear end. should have double press cocking mechanism. should have a penetration depth of 22mm. core sample size should be 19mm. the needle thickness should be available in 16g with needle available in the length of 10cm & 16cm,disposable biopsy gun should be spring loaded, fully automatic biopsy gun. should have angled sample notch for enhanced needle action. instrument should have a choice of two firing buttons – one on the body and other on the rear end. should have double press cocking mechanism. should have a penetration depth of 22mm. core sample size should be 19mm. the needle thickness should be available in 18g with needle available in the length of 10cm, 16cm, 20cm & 25cm. (assorted sizes),disposable biopsy gun should be spring loaded, fully automatic biopsy gun. should have angled sample notch for enhanced needle action. instrument should have a choice of two firing buttons – one on the body and other on the rear end. should have double press cocking mechanism. should have a penetration depth of 22mm. core sample size should be 19mm. the needle thickness should be available in 20g with needle available in the length of 10cm, 16cm, 20cm . (assorted sizes),disposable bone marrow needle no: 13,disposable cannula 27g bent for hydrodissection,disposable cannula multiport for lasik,disposable corneal trephines,disposable corneal trephines size 6.0, 6.5, 9.0, 10.0, 10.5, 11.0, 11.5, 12.0, 14.0,disposable dipers adult size: 200.10mm 125 frontal tape 5.31,disposable draw sheets (pead / neonatal),disposable dressing procedural pack large sterallized by gamma sterallizasion,disposable e t tubes cuffed size 2.5,disposable e t tubes cuffed size 4.0,disposable e t tubes cuffed size 5.0,disposable e t tubes cuffed size 5.5,disposable e t tubes cuffed size 6.0,disposable e t tubes cuffed size 6.5,disposable e t tubes plain size 2.5,disposable e t tubes plain size 3.0,disposable e t tubes plain size 3.5,disposable e t tubes plain size 4.0,disposable e t tubes plain size 4.5,disposable e t tubes plain size 5.0,disposable e t tubes plain size 5.5,disposable e t tubes plain size 6.0,disposable e t tubes plain size 6.5,disposable e t tubes plain size 7.0,disposable e t tubes plain size 7.5,disposable elbow size: long gloves,disposable handset for debridement which is fit in hydrosurgery system console,achiveing maximum tissue preservation and precisely control the depth of debridement 15 degree/14mm,disposable handset for debridement which is fit in hydrosurgery system console,achiveing maximum tissue preservation and precisely control the depth of debridement 45 degree/14mm,disposable handset for debridement which is fit in hydrosurgery system console,achiveing maximum tissue preservation and precisely control the depth of debridement 45 degree/8mm,disposable hip u drape,disposable insulin syringe 1ml 26g,disposable knee o drape 240x340cm,disposable laryngeal mask airway size: 0,disposable laryngeal mask airway size: 1,disposable laryngeal mask airway size: 1.5,disposable laryngeal mask airway size: 2,disposable laryngeal mask airway size: 3,disposable laryngeal mask airway size: 4,disposable micro drip set,disposable needle 23g 1 inch,disposable needle single use hypodermic 26g 1/2 inch 0.45 x 13mm,disposable needle 23g,disposable needle 23g 1/2 inch,disposable needle 30g 1/2 inch,disposable needle no: 16,disposable needle no: 18,disposable needle size: 22,disposable oxygen face mask (adult),disposable oxygen face mask (peadiatric),disposable petri plates,disposable plastic aprons (length 60)(pcb approved),disposable punches skin biopsy 1.00mm,disposable punches skin biopsy 1.5mm,disposable punches skin biopsy 3.0mm,disposable punches skin biopsy 5.0mm,disposable punches skin biopsy 6.0mm,disposable shoulder drapes,disposable simcoe cannula,disposable spinal needle size: 22g,disposable spinal needle size: 23g,disposable spinal needle size: 24g,disposable spinal needle size: 25g,disposable spinal needle size: 26g,disposable spinal needle size: 27g,disposable sterile centrifuge tubes 15 ml chemical,disposable sterile syringe 10ml with needle 22/23 g,disposable sterile syringe 1ml with needle 26g,disposable sterile syringe 20ml with needle 22/23 g,disposable sterile syringe 2ml with needle 22/23 g,disposable sterile syringe 3ml with needle 22/23 g,disposable sterile syringe 50ml,disposable sterile syringe 5ml with needle 22/23 g,disposable suction catheter all size each : 6.0, 8.0, 10.0, 12.0, 14.0,disposable syringe 10 ml,disposable syringe 5 ml,disposable syringe with needle 1ml,disposable syringe with needle 2ml,disposable syringe with needle 3ml,disposable test tube without cark,disposable tuberculin syringe 1 ml with 27g 1/2 inch needle,disposable urine container (plastic),disposable vaccum suction set with tip,disposable ventilator circuit (pead) breathing,disposable ventilator circuit (adult),distilled water (de mineralised water) 5ltr can,documentation roll steam,dosi flow (pediatric),dosi flow i.v.extension set with i.v.flow regulator 2ml/hour to 350ml/hour,double blood bag cpda 350 ml,double blood bag cpda 450 ml,double distilled water chemical,double lumen closed suction system with nebulization port,double lumen tubes left 28,double lumen tubes left 32,double lumen tubes left 35,double lumen tubes right 28,double lumen tubes right 32,double lumen tubes right 35,dpx mountant 250ml,drager anaesthesia machine/workstation nibp cuff cable,drager anaesthesia machine/workstation etco2 sensor with cable,drager anaesthesia machine/workstation monitor ecg cable,drager anaesthesia machine/workstation nibp cuff,drager anaesthesia machine/workstation water lock/trap,drager anaesthesia machine/workstation monitor spo2 sensor with cable,drager baby incubator c2000 skin probe,drager baby warmer iics 90 skin probe,drager baby warmer with resuscitaire airsheild skin probe,drager expiratory valve for drager ventilator,drager flow sensor for drager ventilator,drager neo flow sensor calble for drager ventilator,drager neo flow sensor for drager ventilator,drager o2 sensor for drager ventilator,drager resusable adult ventilator circuit for drager ventilator,drape &without iodine 66cmx85cm,dressing ag size : 20x50,dressing hydrocolloid with foam 20cmx 20cm,dressing material five layered highly absorbent foam, self adherent border w/f viral & bacterial barrier with soft silicone ( border sacrum self adherent soft silicone foam dressing) 18 x 18,dressing material five layered highly absorbent foam, self adherent border w/f viral & bacterial barrier with soft silicone ( border sacrum self adherent soft silicone foam dressing) 23 x 23,dvt stocking,dxh cell lyse 5 lts.,dxh cleaner 10lts.,dxh differential pack (1x1900ml & 1x 850ml),dxh diluents 10ltrs,dyed polyester poly (p dioxanone ) 120 to 180 days size: 1 0, 1/2 circle taper point ct 1 36mm pdo bidirectional 14cm x 14cm with leader length 35mm,dyed polyester poly (p dioxanone ) 120 to 180 days size: 2 0, 1/2 circle taper point mh 36mm pdo bidirectional 36cm x 36cm with leader length 35mm,dyed polyester poly (p dioxanone) 120–180 days size 1 bidirectional spiral with 1/2 circle taper point ct 1 36mm needle suture length 24cm x 24cm with leader length 35mm / suture,dyed polyester poly (p dioxanone) 120–180 days size 1 0 bidirectional spiral with 1/2 circle taper point mh 36mm needle suture length 24cm x 24cm with leader length 35mm / suture,dyed polyester poly (p dioxanone) 120–180 days size 2 0 bidirectional spiral with 1/2 circle taper point mh 36mm needle suture length 14cm x 14cm with leader length 35mm / suture,dyed polyester poly (p dioxanone) 120–180 days size 2 0 bidirectional spiral with 1/2 circle taper point sh 26mm needle suture length 14cm x 14cm with leader length 35mm,dyed polyester poly (p dioxanone) 120–180 days size 3 0 bidirectional spiral with 1/2 circle taper point ct 3 22mm needle suture length 14cm x 14cm with leader length 35mm / suture,dyed polypropylene non absorbable size 1 bidirectional spiral with 1/2 circle, taper point, ct 1 36mm needle, suture length 24cm x 24cmwithleader length 35mm / suture,dyed polypropylene non absorbable size 2 0 unidirectional spiral with 1/2 circle, taper point, sh 1 22mm needle, suture length 30cm with leader length 15mm / suture,dyed polyster poly p dioxanone 120 180 days size 1 bi directional spiral with os 6 needle suture length 30cm x 30 cm with leader length 35mm,dyed polyster poly p dioxanone 120 180 days size 1 bi directional spiral with os 8 needle suture length 36cm x 36cm with leader length 35mm / suture,e. t.o. catridge 40g,ea 36 (eosin azure),ear buds (1 packet 100 nos rate),easy lite kits for serum electrolytes & qc full set,ecg electrode leads (adult),ecg electrode leads (peadiatric),ecg gel ( electrode gel) 250ml,ecg paper roll 18mm x 20mtrs.,edta ethylenedinitrilotetraacetic acid disodium salt titriplex ||| pure,edta powder,eea stapler with collapsible anvil and directional stapling technology, single handle operation 25mm,eenema for proctoclysis 100ml,elastic adhesive bandage 10cmx4.6mts,elecsys ferritin 100 test,embedding rings,embedding rings,endo bronchial tube 28 f,endo tracheal tube size: 4.5 cuffed,endo tracheal tube plain size: 2.5,endo tracheal tube plain size: 3.5,endo tracheal tube plain size: 3 0,endo tracheal tube plain size: 4.0,endo tracheal tube plain size: 4.5,endo tracheal tube plain size: 5.5,endo tracheal tube size: 3.0 cuffed,endo tracheal tube size: 3.5 cuffed,endo tracheal tube size: 4 0 cuffed,endo tracheal tube size: 5.0 plain,endo tracheal tube size: 5.0 cuffed,endo tracheal tube size: 5.5 cuffed,endo tracheal tube size: 6 .5 plain,endo tracheal tube size: 6.0 plain,endo tracheal tube size: 6.0 cuffed,endo tracheal tube size: 6.5 cuffed,endo tracheal tube size: 7 plain,endo tracheal tube size: 7.0 cuffed,endo tracheal tube size: 7.5 plain,endo tracheal tube size: 7.5 cuffed,endo tracheal tube size: 8.0 plain,endo tracheal tube size: 8.0 cuffed,endo tracheal tube size: 8.5 cuffed,endo tracheal tube size: 9 plain,endo tracheal tube size: 9 cuffed,entorotome,enzymatic clenzer protease, lipase, amylase and cellulase,eosin (water soluble) yellow,eosin water soluble yellow,epidural infusion kit (disposable),epidural kit 18 g (epidural catheter with bacterial filter with needle and lor syringe ),epidural kit 20 g (epidural catheter with bacterial filter with needle and lor syringe),eshmark tourquit 3,eshmark tourquit 4,eshmark tourquit 6,esr pipette disposable,et tube south pole size: 7,et tube south pole size: 7.5,etco 2 sample line dragger,etco 2 sample line ge machine,etco 2 water lock dragger,etco 2 water lock ge machine,etco2 water lock (mindray monitor),ethanol (60 v/v) cyclopentasiloxane( ) c12 15 alkyl lactae( ) cetyl lactae( ) aminomethyl propanol( ) carbomer( ) diazolidinyl(urea( ) fragrance ( ) propylene glcol ( ) methylparaben ( ) lodopropynyl butylcarbamate ( ) phenethyl dimrthicone ( ) propylparabeen ( ) glycerin ( ) sodium coco pg dimonium chloride phosphate ( ) stearoxytrimethylsilane( ) phenoxytrimethylsilane ( ) phenoxythanol ( ) stearyl alcohol( ) benzalkonium chloride ( ) size 1 liter,ethnol ip 3 v/v benzalkonium chloride solution ip 0.5 v/v equivalent to benzalkonium chloride 0.25 w/v / for prevention of bedsores,extention tube 100 cm,extention tube 25cm,extention tube 50 cm,extention tube 10 cm,extra large incise 90x85cm,eye pressure shield with soft foam should be made up of soft foam ang rigid plastic shield ,should have foam thickness of 17 to 19mm.should have plastic type,should not have weight more than 50gms,eye sheild,eyelid occlusion dressing should have dual zone, outer and central with central zone as transprent window,falcon tubes 50ml,fda approved waterless, brushless, scrubless chg & ethanol based surgical hand antiseptic with moisturezers containg chlorhexidine gluconate 1 w/w and ethyl alcohol 61 w/w supplied with a footpump for easier & quick application ensuring touch less delivery.,fecal management system collection bag 1x10eu,fenestrated, a unique native collagen elastin matrix, flexible, more collagen, stronger, non chemical cross linked, conformable at complicated anatomic areas, easy to use, handle and apply. size 105x148x2 mm,fenestrated, a unique native collagen elastin matrix, flexible, more collagen, stronger, non chemical cross linked, conformable at complicated anatomic areas, easy to use, handle and apply. size 52x74x1 mm,fenestrated, a unique native collagen elastin matrix, flexible, more collagen, stronger, non chemical cross linked, conformable at complicated anatomic areas, easy to use, handle and apply. , size 105x148x1mm,fenestrated, a unique native collagen elastin matrix, flexible, more collagen, stronger, non chemical cross linked, conformable at complicated anatomic areas, easy to use, handle and apply. size 297x210x1mm,fenestrated, a unique native collagen elastin matrix, flexible, more collagen, stronger, non chemical cross linked, conformable at complicated anatomic areas, easy to use, handle and apply. size 52x74x2 mm,fibrinogen reagent kit,filter paper (46x 56cms),filter paper size: 56cmx46cm,five layered highly absorbent dressing, flextechonology with unique conformability 360 degree flexibility, absorpiton layer made up of polyacrylatefibres, , wound pad spreading layer is polyster/viscose nonwoven, with polyurethane backing film as water, bacteria & viral barrier with soft silicone wound contact layer.size 15x15 cm,five layered highly absorbent dressing, flextechonology with unique conformability 360 degree flexibility, absorpiton layer made up of polyacrylatefibres, , wound pad spreading layer is polyster/viscose nonwoven, with polyurethane backing film as water, bacteria & viral barrier with soft silicone wound contact layer.size 7.5 x7.5 cm,five layered highly absorbent dressing, flextechonology with unique conformability 3600flexibility, absorpiton layer made up of polyacrylatefibres, , wound pad spreading layer is polyster/viscose nonwoven, with polyurethane backing film as water, bacteria & viral barrier with soft silicone wound contact layer.size12.5x12.5 cm,five layered highly absorbent dressing, flextechonology with unique conformability 360 degree flexibility, absorpiton layer made up of polyacrylatefibres, wound pad spreading layer is polyster/viscose nonwoven, with polyurethane backing film as water, bacteria & viral barrier with soft silicone wound contact layer.size 10x10 cm,five layered highly absorbent foam dressing with self adherent borders with polyurethane backing film as water, bacterial and viral barrier with soft silicone adhesive technology/ safetac technology for heel pressure ulcer. usage upto 7 days. size 22x23 cm,five layered highly absorbent foam dressing with self adherent borders with polyurethane backing film as water, bacterial and viral barrier with soft silicone adhesive technology/ safetac technology for sacral pressure ulcer. usage upto 7 days. size 16x20 cm,five layered highly absorbent foam dressing with self adherent borders with polyurethane backing film as water, bacterial and viral barrier with soft silicone adhesive technology/ safetac technology for sacral pressure ulcer. usage upto 7 days. size 22x25 cm,flexo metalic tube size: 8,flexo metalic tube size:6,flexo metalic tube size:6.5,flexo metalic tube size:7,flexo metalic tube size:7.5,flexo metalic tubes size: 8.5,flexo metalic tubes size: 9,flowable gelatin hemostatic matrix with human thrombin 2000iu,6cc syringe pre filled with hemostatic matrix with 14.3cm white applicator tip & 14.6cm blue flexible applicator tip (8ml gelatin based hemostatic matrix with thrombin),fluorescein sodium sterile opthalmic strips usp,fluorescein sodium strips,fnac gun,foam adhesive dressing 15cmx15,foam adhesive dressing 30cmx30,foam dressing 10cmx10cm,foldable hydrophobic iol,foldable iol hydrophilic acrylic with disposable injector and cartridge lowers to highest available power (must give suitable alternative power lens exchange, as and when required immediately),foley catheter silicon 10 fr 2way coated with 3 nobel metal au, ag, and pd. non releasing coating technology,foley catheter silicon 12 fr 2way coated with 3 nobel metal au, ag, and pd. non releasing coating technology,foley catheter silicon 14fr 2way coated with 3 nobel metal au, ag, and pd. non releasing coating technology,foley catheter silicon 16 fr 2way coated with 3 nobel metal au, ag, and pd. non releasing coating technology,foley catheter silicon 18 fr 2way coated with 3 nobel metal au, ag, and pd. non releasing coating technology,foley catheter silicon 20 fr 2way coated with 3 nobel metal au, ag, and pd. non releasing coating technology,foley catheter silicon 8 fr 2way coated with 3 nobel metal au, ag, and pd. non releasing coating technology,foleys catheter size: 10,foleys catheter size: 12,foleys catheter size: 14,foleys catheter size: 18,foleys catheter size: 8,foleys catheter size:16,folleys catheter size :10,folleys catheter size 6,formaldehyde 500 ml,formaldehyde solution ip 66,formalin,frosted micro slide,gel card ( coross maching),gel pads head cradle mattress big,gel pads head cradle mattress small,gelatin powder,gia stapler reload with knife in each reload with directional stapling technology /60 4.8mm,gia stapler reload with knife in each reload with directional stapling technology /80 3.8mm,gia stapler reload with knife in each reload with directional stapling technology /80 4.8mm,gia stapler stainless steel reusable, no knife, no release button in the stapler / 80mm,gia stapler with no knife in the stapler and attached release button in the stapler / 100mm,gia staplers for open surgery linear cutter with intermediate locking position for easy tissue manipulation, two sided firing for easy handling,proximal pre load support for consistent staple formation,offering 6 row ,3d staple technology and staple line of 58mm,cut line of 61mm,gia staplers for open surgery linear cutter with intermediate locking position for easy tissue manipulation, two sided firing for easy handling,proximal pre load support for consistent staple height of 1.5mm,1.8mm and 2mm,giemsa solution,glass slides frosted,glial fibrillary acidic protein (gfap),glucostrips (grbs),glutaraldehyde 2,glutraldehyde solution chemical 1x5 ltrs.,gluturaldehyde 5 lit can,glycerin ip,glycerin lr,glycerol 48 52,glycerol 85,glycolic acid 20,glycolic acid 30,glycolic acid 35,glycolic acid 70,graduated khans tube (glass) silicon coated,graduated khans tube (plastic),green laser slit lamp bulb 12v 30w,grossing knife,haematoxylin (harris),halothane 250 ml,hand restrainers,hand rub chlorohexadine gluconate 0.5 w/v ethyl alcohol ip 70 v/v,hand wash (surgi klin anti bacteria liquid handwash is formulated for sensitive soft and gentle hand. leaving your hand delicately cared. clean ,soft and healthy.),hb pipette,hb tube,hbv dna (altona ) 96 reaction kit,hematology analyser kits for cbc full set with qc (erba),hematoxylin,hemihydrate calcium sulphate kit to prepare resorbable antibiotics pallets 10 cc,hemihydrate calcium sulphate kit to prepare resorbable antibiotics pallets 5 cc,her2,high absorbent waterproof post operative dressing with high mvtr of 3000g/24h@37c (opsite post op) 10cmx25cm,high absorbent waterproof post operative dressing with high mvtr of 3000g/24h@37c (opsite post op) 10cmx30cm,high absorbent waterproof post operative dressing with high mvtr of 3000g/24h@37c (opsite post op) 10cmx35cm,highly absorbant polyurethane foam dressing for moderate to highly exuding wounds, patented silver profile with sustained release of silver during the entire wear time (upto 7 days), unique 3d foam structure for superior absorption, water proof and bacterial proof semi permeable polyurethane top film, dosage form and strength: 10x10cm,highly absorbant polyurethane foam dressing for moderate to highly exuding wounds, patented silver profile with sustained release of silver during the entire wear time (upto 7 days), unique 3d foam structure for superior absorption, water proof and bacterial proof semi permeable polyurethane top film, dosage form and strength: 10x20cm,highly absorbant polyurethane foam dressing for moderate to highly exuding wounds, unique 3d foam structure for superior absorption, water proof and bacteiaproof semi permeable polyurethane top film, dosage form and strength: cavity filler 5x8cm,highly absorbant polyurethane foam dressing with hydrocolloid adhesive border for moderate to highly exuding wounds, patented silver profile with sustained release of silver during the entire wear time (up to 7 days), unique 3d foam structure for superior absorption, water proof and bacteriaproof semi permeable polyurethane top film, dosage form and strength: 23x23cm sacral,highly absorbant polyurethane foam dressing with hydrocolloid adhesive border for moderate to highly exuding wounds, patented silver profile with sustained release of silver during the entire wear time (upto 7 days), unique 3d foam structure for superior absorption, water proof and bacteriaproof semi permeable polyurethane top film, dosage form and strength: 19x20cm heel,highly absorbent polyurethane foam dressing for moderate to highly exuding wounds, patented silver profile with sustained release of silver during the entire wear time (up to 7 days), unique 3d foam structure for superior absorption, water proof and bacterial proof semi permeable polyurethane top film, dosage form and strength: 20x20cm,highly absorbent polyurethane foam dressing for moderate to highly exuding wounds, patented silver profile with sustained release of silver during the entire wear time (up to 7 days), unique 3d foam structure for superior absorption, water proof and bacterial proof semi permeable polyurethane top film, dosage form and strength: 15x15cm,highly absorbent polyurethane foam dressing with hydrocolloid adhesive border for moderate to highly exuding wounds, patented silver profile with sustained release of silver during the entire wear time (upto 7 days), unique 3d foam structure for superior absorption, water proof and bacteria proof semi permeable polyurethane top film, dosage form and strength: 18x18cm,highly absorbent polyurethane foam dressing with hydrocolloid adhesive border for moderate to highly exuding wounds, unique 3d foam structure for superior absorption, water proof and bacteria proof semi permeable polyurethane top film, dosage form and strength: sacral 17x17cm,highly compressed silicone dressings for scars with shower proof nov woven backing film, with ultra violet protection factor 5 & self adherent soft silicone adhesive technology/ safetac technology. usage upto 14 days. size 4x30 cm,hikaryoxl rpmi medium,hi media ph paper [la310],hme filter adult 8000,hydro cannula 26g,hydrocellular five layered foam dressing ,hyper absorbent lock away core and masking layer which has been designed for better patient outcome with unique patented exumask change indicator,advanced lock in 10.3cmx10.3cm,hydrocellular five layered foam dressing ,hyper absorbent lock away core and masking layer which has been designed for better patient outcome with unique patented exumask change indicator,advanced lock in 17.2cmx17.5cm,hydrocolloid based hydroactive gel comprising of pectin, sodium carboxymethylcellulose and 80 water ina high viscous form for autolytic debridement 30gms,hydrocolloid dressing containing calcium alginate + carboxy methyl cellulose with high abosrption efficiency, semi permeable waterproof and bacteriaproof top film, unique dressing change indicator, wound mapping grid pattern, no pectin or gelatin, dosage form and strength: 10x10cm,hydrocolloid dressing containing calcium alginate + carboxy methyl cellulose with high abosrption efficiency, semi permeable waterproof and bacteriaproof top film, unique dressing change indicator, wound mapping grid pattern, no pectin or gelatin, dosage form and strength: 15x15cm,hydrocolloid dressing containing calcium alginate + carboxy methyl cellulose with high abosrption efficiency, semi permeable waterproof and bacteriaproof top film, unique dressing change indicator, wound mapping grid pattern, no pectin or gelatin, dosage form and strength: 20x20cm,hydrocolloid dressing containing calcium alginate + carboxy methyl cellulose with high abosrption efficiency, semi permeable waterproof and bacteriaproof top film, unique dressing change indicator, wound mapping grid pattern, no pectin or gelatin, dosage form and strength: sacral 18x20cm,hydrofiber dresssings with 1.2 impregnated ionic silver with broad spectrum bactricidal efficacy & gel forming technology, 2x45 cm,hydrofiber dresssings with 1.2 impregnated ionic silver with broad spectrum bactricidal efficacy & gel forming technology, ce , iso & fda approved 2x45 cm,hydrogen peroxide solution 450ml,hydrogen peroxide solution 60ml,hydrophilic foam silver pad (non adhesive) 5x5cm,hydrophilic foam silver pad (non adhesive)10x10cm,hydroxypropylmethylcellulose 2 (eye gel),hypochlorous acid(hocl) 0.003 sodium hypochlorite (naocl) 0.004 electrolyzed water 99.97 1x500ml,hypochlorous acid(hocl) 0.003 sodium hypochlorite (naocl) 0.004 electrolyzed water 99.97 1x1000ml spray,hypochlorous acid(hocl) 0.003 sodium hypochlorite (naocl) 0.004 electrolyzed water 99.97 1x100ml spray,hypochlorous acid(hocl) 0.008 sodium hypochlorite (naocl) 0.002 electrolyzed water 97.64 1x60gm jar,hypochlorous acid(hocl) 0.008 sodium hypochlorite (naocl) 0.002 electrolyzed water 97.64 1x120gm,hypochlorous acid(hocl) 0.008 sodium hypochlorite (naocl) 0.002 electrolyzed water 97.64 1x400gm jar,i v cannula 18g, 20g, 22g, 24g,i.v drip set (infusion set),icd bag (inter costal drainage),icd bag with tubes 28g (inter costal drainage),icd bag with tubes 32g (inter costal drainage),igel adult / paediatric size:1,igel adult / paediatric size:1.5,igel adult / paediatric size:2,igel adult / paediatric size:2.5,igel adult / paediatric size:3,igel adult / paediatric size:4,igel adult / paediatric size:5,igel adult / paediatric size:7,incenive spriometry,incise drape which is antimicrobial, strong conformable and breathable lodophor impregnated polyster film coated with hypoallergenic adhesive for superior adhesion, compatible with povidine iodine & chg preps latex free.,indicator ph paper range 2 to 10.5,infant feeding tube size: 10,infant feeding tube size: 5,infant feeding tube size: 6,infant feeding tube size: 7,infant feeding tube size: 8,innovin 4 ml,instrument sterilant sodium perborate monohydrate 50 w/w (en reports endoscope compatibility) 1x810gm,integra ada 200test,integra albumin 300 test,integra alp 400 test,integra crp 4 250tests,integra direct bilirubin 350 test,integra iron 200 test,integra ldh 300 test,integra na c1 50,integra na oh d 50ml,integra total bilirubin gen 3 250 test,integra total protein 300 test,integra transferrin 100 test,integra uibc 100 test,internation advanced level (ial system) syringe,intraocular lens rigid (p.c) pmma u.v absorbing optic power range lowers to highest available (must give sutiable alternative power lens exchange, as and when required immediately) following power required ce or iso certified equiconvex or biconvex, modified c, step vault, single piece,intubating lma size: 3,intubating lma size: 4,ioban drape (ioban 2 incise area 23 x 17 (60cm x 45cm),iodine impreganated insice large incise 66cmx60m,ionic silver nitrate 0.01 + menthol + tween 20 + glycrol solution 100, 1x250ml,iris claw lens,iris hook,irrigation cannula 22g,irrigation cannula with aspiration,ise diluent,ise internal standard,ise reference electrolytes,iso ompa (t1505 100mg tetrapropyl pyro phosphoramide butiryle choline estirase inhibitor),iso propyl alcohol 70% ltrs.,isoflurane usp inhalation anaesthetic 250 ml,isopropyl alcohol,iv cannula size: 18g,iv cannula size: 20g,iv cannula size: 22g,iv cannula size: 24g,iv cannula size: 26g,iv drip set,ivory nasopharyngeal airway with safety pin,jockson rees circuit,jockson rees pediatric circuit chemical,kells pad (rubber),knives (for grossing),labels medium size,labomet slit lamp bulb 6v 20w,lactic acid 30% 11ml,lactic acid 50% 30ml,large incice 90x60cm,laryngeal mask airway i gel 3,laryngeal mask airway i gel 4,laryngoscope cells,latex free advanced fecal incontinence management system,soft, flexible retention balloon conforms to sphincter anatomy to create an effective seal that minimizes leakage , single finger insertion, closed end collection bag,latex free advanced fecal incontinence management system,soft, flexible retention balloon conforms to sphincter anatomy to create an effective seal that minimizes leakage , single finger insertion, closed end collection bag,leg compression stockings,leptospira rapid test,light weight 3d mesh for laparoscopic hernia for right / left inguinal hernia made of polypropylene mesh with medial orientation marker, contour shape, and crest corresponds with inguinal ligament, notch corresponds with iliac vesicles size: 10.3cm x 15.7cm,light weight 3d mesh for laparoscopic hernia for right / left inguinal hernia made of polypropylene mesh with medial orientation marker, contour shape, and crest corresponds with inguinal ligament, notch corresponds with iliac vesicles size: 12.2cm x 17cm,light weight 3d mesh for laparoscopic hernia for right / left inguinal hernia made of polypropylene mesh with medial orientation marker, contour shape, and crest corresponds with inguinal ligament, notch corresponds with iliac vesicles size: 7.9cm x 13.4cm,lightweight elasticated tubular dressing for retention with 2 way stretch technology (radial & longitudinal stretch) with color coding for identification. size,lightweight elasticated tubular dressing for retention with 2 way stretch technology (radial & longitudinal stretch) with color coding for identification. size 20x1000cm,liquid micro bicidal hand wash soap 500ml,liquid nitrogen 3ltr,liquid parafffin 100ml,liss coombs gel card (biorad),lissamine green 5pack,lma tube size: 2,lma tube size: 3,lma tube size: 5,lma tubes 1.5, 2.0, 2.5, 3.0, 3.5, 4.0, 4.5, 5.0,low adherent absorbent wound dressing with a polyester perforated wound contact layer with an outer hydrophobic non woven layer 10x10cm,low adherent absorbent wound dressing with a polyester perforated wound contact layer with an outer hydrophobic non woven layer which is highly conformable and can be cut to shape, shows delayed risk of exudate strike through to the outer dressing surface, low risk of fibre shed or new tissue cell growth from the wound into the absorbent pad. 50cmx7mtr roll,low adherent absorbent wound dressing with a polyester perforated wound contact layer with an outer hydrophobic non woven layer which is highly conformable and can be cut to shape, shows delayed risk of exudate strike through to the outer dressing surface, low risk of fibre shed or new tissue cell growth from the wound into the absorbent pad. 20cm x 10cm,low profile blades microm sec 35 p (for automated microtome),low profile blades microm sec 35(for automated microtome ),lumber corset belt,lysil pure poly siloxone based silicon scar manegment,m.v. drip set (burret set),macro porus partially absorbable mesh made up of approximately equal parts of polypropylene monofilament fiber (6 0) and poliglecaprone 25 monofilament fiber (5 0) with pore size 2.7 mm having a weight of 39 g/m2 and containing blue orientation stripes of polypropylene(size 10 cm x15 cm),macro porus partially absorbable mesh made up of approximately equal parts of polypropylene monofilament fiber (6 0) and poliglecaprone 25 monofilament fiber (5 0) with pore size 2.7 mm having a weight of 39 g/m2 and containing blue orientation stripes of polypropylene(size 15 cm x 15 cm),macro porus partially absorbable mesh made up of approximately equal parts of polypropylene monofilament fiber (6 0) and poliglecaprone 25 monofilament fiber (5 0) with pore size 2.7 mm having a weight of 39 g/m2 and containing blue orientation stripes of polypropylene(size 7.6 cm x15 cm),magills freceps (adult),magills freceps (paediatric),magnesium sulphate paste,malachite green,malachitt green,malleable stylet pediatric / adult / large,mandelic acid,mantoux syringe 1ml,masimo radical 97 spo2 sensor,masimo radical 97 spo2 sensor cable,masimo radical 97 spo2 sensor disposable,massons trichome staining kit,mayers hematoxylin,mc coy laryngoscope blade size: 3,mc coy laryngoscope blade size: 4,mc coy laryngoscopes (all size),mccarey kaufmann preservative media,medicated, non fraying, tulle grass paraffin gauze dressing with leno weave technology containing chlorhexidine acetate (0.5) which is a broad spectrum antiseptic active against gram positive & negative bacteria and which gives a smoothing effect and protection to the wound. 15cm x 1 mtr roll,medicated,non fraying ,tulle gras paraffin gauze dressing with leno weave technology containing chlorhexidine acetate (0.5) which is a broad spectrum antiseptic active against gram positive & gram negative bacteria and which gives a soothing effect and protection to the wound. 10x10cm pouch,medium insice 90x45cm,membrane pad dressing 5x5,membrane pad dressing 6.5x7.5,mercuric oxide red,mercuric oxide red,metaloop ss 4 fixed nichrome loop,methylene blue,methylene blue solution,micro centrifuge tube 1.5ml,micro drip set,micro gas c3 f8,micro gas sf6,microdermabrasion crystals (aluminium oxide ) / kg,micropore paper plaster 1,micropore paper plaster 3,micropore paper plaster 2,micropore paper plaster 4,micropore paper plaster 6,micropore plaster 1 inch,microscopy oil 10ml,mindray vs 800 spo2 sensor,moisture responsive high 3000g / 24h @ 37c film dress for central and peripheral line catheter (iv3000) 5cmx6cm,moisture responsive high mvtr 3000g / 24h @ 37c film dress for central and peripheral line catheter (iv3000) 10cmx12cm,moisture responsive high mvtr 3000g / 24h @ 37c film dress for central and peripheral line catheter (iv3000) 10cmx14cm,moisture responsive high mvtr 3000g / 24h @ 37c film dress for central and peripheral line catheter (iv3000) 6cm x 7cm,moisture responsive high mvtr 3000g / 24h @ 37c film dress for central and peripheral line catheter (iv3000) 7cm x 9cm,moisture responsive high mvtr 3000g / 24h @ 37c film dress for central and peripheral line catheter (iv3000) 9cmx12cm,monocanalicular stent size 50mm length,moping pad (lap sponge),multi enzymatic cleaner multienzyme protease, amaylase, cellulase lipase and non ionic surgactant, chclating agents, rust inhibitors ph regulatorsstebilizers,multi functional mask for all tasks like: nebulizer mask, aerosal mask, venturi mask, non rebreather, simple mask,n/ 10hcl,n 95 mask,nanocrystallin silver anti microbial 20x40,napsin a,nasal air ways size: 3.5,nasal air ways size: 4.0,nasal air ways size: 4.5,nasal air ways size: 6.0,nasal air ways size: 7.0,nasal air ways size: 7.5,nasal prongs,naso pharyngeal airway (all size),native collagen elastin matrix, flexible, more collagen, stronger, non chemical cross linked, conformable at complicated anatomic areas, easy to use, handle and apply. size 297x210x1mm,native collagen elastin matrix, flexible, more collagen, stronger, non chemical cross linked, conformable at complicated anatomic areas, easy to use, handle and apply. size 52x74x1 mm,native collagen elastin matrix, flexible, more collagen, stronger, non chemical cross linked, conformable at complicated anatomic areas, easy to use, handle and apply. size 52x74x2 mm,native collagen elastin matrix, flexible, more collagen, stronger, non chemical cross linked, conformable at complicated anatomic areas, easy to use, handle and apply. , size 105x148x1mm,native collagen elastin matrix, flexible, more collagen, stronger, non chemical cross linked, conformable at complicated anatomic areas, easy to use, handle and apply. , size 105x148x2 mm,natural absorbable sutures chromic catgut size: 3 0 with 22mm 3/8 circle cutting needle, suture length 76 cm / suture,natural absorbable sutures chromic catgut size: 4 0 with 16mm 3/8 circle cutting needle, suture length 76 cm / suture,natural non absorbable black braided silk sutures size: 2 0 with 45mm 3/8 circle reverse cutting needle, suture length 76cm / suture,natural non absorbable black braided silk sutures size: 3 0 with 20mm 1/2 circle round body needle, suture length 76cm / suture,natural non absorbable black braided silk sutures size: 3 0 with 25mm 1/2 circle round body needle, suture length 90cm / suture,natural non absorbable black braided silk sutures size: 3 0 with 26mm 3/8 circle reverse cutting needle, suture length 76cm / suture,natural non absorbable black braided silk sutures (reels) size 1 0 with 25mm length / suture,natural non absorbable black braided silk sutures size 1 with1/2 circle reverse cutting[heavy[ 45mm needle suture length 100 cms,natural non absorbable black braided silk sutures size 1 0 with 45mm 3/8 circle reverse cutting needle, suture length 76cm,natural non absorbable black braided silk sutures size 3 0 with 25mm 1/2 circle round body needle,suture length 76 cm,natural non absorbable black braided silk sutures (reels) size 3 0 with suture length of 25mm / suture 1x6 reels,natural non absorbable black braided silk sutures size: 2 0 with 30mm 1/2 circle round body needle, suture length 90 cm / suture,natural non absorbable black braided silk sutures(reels) size 2 0 with suture length of 25mm / suture,nebulisation mask disposable (adult),nebulisation mask disposable (paediatric),needle 11/2 26g,needle free connector duo with flat surface, clear housing, neutral displacement technology, dehp free, latex free, mri & blood compatible, with 15 cm tube large bore micropolysyte clear duo,needle free connector with flat surface, clear housing, neutral displacement technology, dehp free, latex free, mri & blood compatible standalone,neumber counting chamber,nibp cuff (cardiac monitor mac ),nibp cuff mercury bp apparattus,nice neotech warmer heater coil,nice neotech warmer skin probe,nitric acid,nitrile gloves chemical,nitrile gloves large,nitrile gloves small,nitro glycerin spray,niv mask,non fraying ,tulle gras paraffin gauze dressing with leno weave technology which gives a soothing effect and protection to the wound disposable 30s pouch,non absorbable surgical suture monofilament polyamide usp 3/8 circle reverse cutting 11mm needle with suture 70cms size: 6 0,non absorbable surgical suture monofilament polyamide usp 4 0 38cm, 3/8 circle reverse cutting 10mm / suture,non absorbable surgical suture monofilament polyamide usp 70cm, 3/8 circle reverse cutting 45mm size: 2 0 / suture,non absorbable surgical suture silk size:1 0 45mm 3/8 circle reverse cutting 76cm / suture,non absorbable surgical suture sterilised black braided silk 1/2 circle round body 16mm needle with suture length 90cm size: 4 0,non absorbable surgical suture sterilised black braided silk 76cm, 3/8 circle cutting, 60mm suture size: 1,,non absorbable surgical suture sterilised black braided silk size:3 0, 76cm 1/2 circle, round body 25mm / suture,non absorbable surgical suture sterilized black braided silk 45mm, 76cm reverse cutting 1/2 circle size: 2 0,,non absorbable surgical suture sterilized monofilamant polypropylene 13mm, round body 1/2 circle 75cm double needle size: 5 0,non absorbable surgical suture sterilized monofilamant polypropylene 70cm round body 3/8 circle 11mm double needle size: 6.0,non absorbable surgical suture, poly propolene 1/2 circle reverse cutting 45mm 100cm suture size: 1,non absorbable suture monofilament nylon suture (polymaide 6) 45mm 3/8 circle reverse cutting 70cm length size 2 0 reverse cutting,non fraying, tulle grass paraffin gauze dressing with leno weave technology which gives a smoothing effect and protection to the wound,non vaccum edta vacutainers 2ml,non woven with absorbent pad 10x20cm,non adherant four layer foam & hydrofiber dressings with viral, bacterial barrier polyurethane top layer with 1.2 impregnated ionic silver & gel forming technology, ce , iso & fda approved 15x15cm,nse,nutrient agar 500 grams,nutritionally complete, calorie dense, balanced material nutrition supplement containing 25 protein derived from whey and casein, low fat of 4 combination of dietary fibre and inulin , colostrum, dha. gla, vitamins and minerals hdpe packs flavor: vanilla [nutrition supplement for material health],nutritionally complete, calorie dense, balanced nutrition supplement for children in the age group 2 10 years containing 15 protein derived from whey, soya and casein, 24 fat derived from high oleic sunflower oil, mct, probiotics l. bacillus and b. longam, dha, fibers, vitamins and minerals hdpe packs flavor: chocolate [nutrition supplement for gowing children],nutritionally complete, calorie dense, formulation for hypercatabolic patients containing 40 protein derived from whey, soya and casein, 15 fat from high oleic sunflower oil, mct, 5 glutamine, alpha lipoic acid, omega 3 and 6 fatty acids, fiber, vitamins and minerals. hdpe packs flavor : vanilla [nutrition supplement for hypercatabolic patients],nutritionally complete, calorie dense, formulation for mainourished patients containing 16% protein derived from whey, soya and casein, 13% fat from high oleic sunflower oil, 0% transfat soluble and insoluble fibers, vitamins and minerals. pack size: 200gm hdpe packs flavor : vanilla [nutrition supplement for general health],nutritionally complete, ready to drink nutrition shake powder for diabetics to manage blood sugar levels by using eigther as a snack in between meals or as a meal replacement with 70 of energy coming from fats and carbohydrates. should contain 20 protein derived from whey and acid casein, 14% fat from high oleic sunflower oil, mct slow release carbohydrates system, fiber rich, vitamins and minerals. hdpe packs flavour: vanilla [nutrition supplement for diabetics],oct gel (for cryostat) 118 ml,octenidine based wash lotion with neutral ph, tested as per european norsm cantaining octenidine hcl, aqua,octenidol mouth wash (octenidine base mouth wash for oral hygiene alcohol and chlorexidine free),octenidol mouth wash (octenidine base mouth wash for oral hygiene alcohol and chlorexidine free),octenidol wash lotion (0.1 octenidine for patient body sponging before / post surgery),og 6 (orange green),open intra peritoneal umbilical hernia mesh patch with absorbable hydrogel barrier, straps, positioning packets, pdo sorbaflex memory ring on one side and light weight polypropylene mesh on the other. 8cm x 8cm,orbital floor implants (titanium),orbital implants acrylic inteticitrated pmma,oropharyngeal airways silicone hard pvc (adult) orange,oropharyngeal airways silicone hard pvc (adult) yellow,oropharyngeal airways silicone hard pvc (adult) green,oropharyngeal airways silicone hard pvc (adult) orange,oropharyngeal airways silicone hard pvc (adult) yellow,oropharyngeal airways silicone hard pvc (paediatric) white,oropharyngeal airways silicone hard pvc (paediatric) white,oropharyngeal airways silicone hard pvc all size: 50 each,ostomy belt,oxalic acid,oxidized regenerated cellulose based topical absorbable hemostat with carboxyl content 18 to 24 w/w , fibrillar/layer form, with bactericidal property. fibril material (7layers) for broad surface area coverage. size 1 inches x 2 inches,oxidized regenerated cellulose based topical absorbable hemostat with carboxyl content 18 to 24 w/w , fibrillar/layer form, with bactericidal property. fibril material (7layers) for broad surface area coverage. size 2 inches x 4 inches,oxidized regenerative cellulose (orc) dense woven absorbable hemostat with carboxyl content 18 to 24 w/w size 1inchesx3.5inches / suture,oxidized regenerative cellulose (orc) dense woven absorbable hemostat with carboxyl content 18 to 24 w/w size 3inchesx4inches,oxidized regenerative cellulose (orc) shear woven absorbable hemostat with carboxyl content 18 to 24 w/w size 2inchesx3inches / suture,oxidized regenerative cellulose (orc) shear woven absorbable hemostat with carboxyl content 18 to 24 w/w size 4inchesx8inches suture,oxidized regenerative cellulose (orc) structured non woven absorbable hemostat with carboxyl content 18 to 24 w/w size 1inchesx2inches suture,oxidized regenerative cellulose (orc) structured non woven absorbable hemostat with carboxyl content 18 to 24 w/w size 2inchesx4inches suture,oxygen set (naso pharyngeal airway set),p53,p63,paediatric bougie and styllet,papain urea & silk protein based wound debriding ointment and cream 100gm,papain urea & silk protein based wound debriding ointment and cream 25gm,papain urea & silk protein based wound debriding ointment and cream 50gm,paracetic acid 5 hydrogen peroxide 20 acetic acid 11 intert ingredients qs,paraffin gauze dressing,paraffin gauze dressing size: 10x10cm,paraffin wax,paraffin wax crystals,pas staining kit (periodical asid schiff),pastuer pippets chemical 1x3ml,pediatric nebulization mask,pentorch,peptone tubes,percutaneous tracheostomy set single dilator and suctionaid tracheostomy tube with tube introducer,percutaneous tracheostomy sets,periodic acid,peritionial dialysis catheter neonatal,peritionial dialysis catheter size: 16 adult,peritionial dialysis catheter size: peadiatric,petri plates,petri plates (autoclave) [pw 060],ph strips,phenol (carbolic acid ) lr,phenol 88,pheonix warmer heater coil,pheonix warmer skin probe,philips mp60 ecg cable,philips mp60 etco2 sensor,philips mp60 etco2 sensor cable,philips mp60 nibp cable,philips mp60 nibp cuff,philips mp60 spo2 sprobe,pico (minivac) dressing size : 15cm x 20cm (open wounds remove barrier to wound healing dressing),pig tail 10fr,pig tail 12fr,pig tail 14fr,pig tail 16fr,pig tail 8fr,plain bed sheet,plain drapes,plaster of pairs roll 10(4),plaster of pairs roll 15(6),plaster of paris roll,plaster of paris roll 15cmx2.7cm,plaster of paris roll 10 (4),plaster of paris roll 15 (6),plastic slides storage box vertical 4 nos. capacity),pmma capsular tension ring (sterile),pmma iol (low power),pmo line,poly o lysine,polypropylene and polyglactin 910 composite partially absorbable lightweight mesh. size 15cmx15cm usfda approved.,polyurethane (hydrophobic foam for fast granulation) foam dressing kit for suction unit with least 5 or more lumens in trac pad which will be used for therapy unit .,polyurethane ester (hydrophobic foam for fast granulation) foam dressing kit which is in spiral cut sheet for suction unit with pressure of 25mm hg to 200 mm hg for instillation (not irrigation) , 2 pieces of foam along 6 drape and two alcohol free no sting barrier film that protects peri wound skin and at least 5 or more lumens in trac pad which will be used for instillation therapy unit .,polyurethane ester (hydrophobic foam for fast granulation) foam dressing kit which is in spiral cut sheet for suction unit with pressure of 25mm hg to 200 mm hg for instillation (not irrigation) which contains 2 pieces of foam along 6 drape and two alcohol free no sting barrier film that protects peri wound skin and at least 5 or more lumens in trac pad which will be used for instillation therapy unit .,positive airway pressure device for secretion management,potassium alum,potassium hydroxide koh 40 w/v 500ml,potassium permangnate crystal,pottassium alum,pottassium ferro cyanide,pottassium ferro cyanide 2,pottassium iodide 250mg,povidine iodine solution 5 w/v,povidine iodine surgical scrub 7.5,povidone iodine gargle ip 2 w/v 100ml,povidone iodine solution 10,povidone iodine solution 10,povidone iodine solution 5,povidone iodine solution 7.5,povidone iodine solution ip 10 w/v 100 ml,powdered oxidized regenerated cellulose endoscopic applicator,powdered oxidized regenerated cellulose pre filled in an easy to use applicator to stop continuous, broad surface oozing – fast, specifically on large friable or raw surfaceswith proven bactericidal property with 3grams powder,powdered oxidized regenerated cellulose pre filled in an easy to use applicator to stop continuous, broad surface oozing – fast, specifically on large friable or raw surfaceswith proven bactericidal property.3gms,preformed southpole r a e tube size:3.5,,preformed southpole r a e tube size: 4.5,preformed southpole r a e tube size: 3,,preformed southpole r a e tube size: 4,preformed southpole r a e tube size: 5,preformed southpole r a e tube size: 6,preformed southpole r a e tube size:3.5,,preloaded clip alppliers with 15 clips, titanium, with optional ratchet mechanism, with matte finish jaw design,preloaded clip appliers with 20 clips, titanium, with optional ratchet mechanism, with matte finish jaw design,preloaded clip appliers with 30 clips, titanium, with optional ratchet mechanism, with matte finish jaw design,preloaded engo clip applier 5mm, titanium clips, with lcd digital clip counter , 16clips,pressure garment below knee,pressure garment chin strap,pressure garment glove,pressure garment glove to axilla,pressure garment panty girdle,pressure garment slevless vest,pressure monitorin line (pmo line),printer ink coltrage for sealing machine,printer ink for autoclave machine,proseal lma 3, 4,protease lipase, amylase and cellulase / for pre cleaning of medical devices before high level disinfection / sterilization for use in ultrasonic cleaning unit, tunnel washing and endoscope reprocessing units 1x1 ltr (biodergradability test),protease, lipase and amylase / for pre cleaning of medical devices before high level disinfection/sterilization,pump with saperate dual filter for pain management,pupil expanders ( guptha ring / b hex ring),pyruvic acid,radial reload with new knife and directional stapling technology,rapid plasma reagin (rpr),rcm media,reaction tubes,ready to use ccnpwt pu foam wound drainage kit 15x20x2cm,ready to use ccnpwt pu foam wound drainage kit 15x30x2cm,rechargeable surgical clipper with fixed head and cutting disposable blade ,run time of atleast 150min with recharge duration of 3 hr with battery charge indicator ,,red rubber catheter size: 10,red rubber catheter size: 12,red rubber catheter size: 3,red rubber catheter size: 4,red rubber catheter size: 6,red rubber catheter size: 8,reinforced tracheal tube straight with high volume low pressure profile soft cuff sizes 5 to 9,rendell baker soucek (rbs)mask,reticulein staining kit (gommoris silver impregnation method),reticulocyte counting fluid,reticulocyte diluting fluid,reusable hospital full face mask size: 2,reusable hospital full face mask size: 3,reusable hospital full face mask size: 4,reusable nasal mask,reusable silicon based (ambu aura 4) lma tubes size 1,reusable silicon based (ambu aura 4) lma tubes size 1.5,reusable silicon based (ambu aura 4) lma tubes size 2,reusable silicon based (ambu aura 4) lma tubes size 2.5,reusable silicon based (ambu aura 4) lma tubes size 3,reusable silicon based (ambu aura 4) lma tubes size 3.5,reusable silicon based (ambu aura 4) lma tubes size 4,reusable silicon based (ambu aura 4) lma tubes size 4.5,riyles tube 8fg, 10fg, 16fg,,robert shaw double lumen tube (size: 35),robert shaw double lumen tube (size: 32),romovac drain no:12,romovac drain no:14,romovac drain no:16,rose bengal sterile opthalmic strips,rose bengal strips,rubber sheet (machantosh),rubeanic acid,rubeanic acid,ryles tube size: 10 fg,ryles tube size: 12 fg,ryles tube size: 14 fg,ryles tube size: 16 fg,ryles tube size: 18fg,ryles tube size: 6 fg,ryles tube size: 8 fg,s100 (pathinsitu),salbutamol respirator solution ip 2.5ml (respules),salicylic acid 20%,salicylic acid 30%,scalp vein set sizes 20,21,22,23,schiff’s reagent,schiffs reagent,schirmer strips,schirmer tear strips,scissor free triple hydrocolloid (gelatin, pectin & nacmc) based flexible tape collar convex skin barrier with elastomeric polymers, plasticisers, tackifiers adaptable to different kinds of stoma forming leak proof, turtlenecking effect & audible click recommended for retracted/deep stoma 33 57mm,sda plates (for culture),secondary antibody kit (ihc),self adherent moist wound dressing made of triple hydrocolloid matrix pectin, gelatin & sodium carboxy methyl cellulose (nacmc) used for pressure ulcers or dry wounds ce, iso & fda approved with 2.5mm thickness : size 10x10cm,self adherent moist wound dressing made of triple hydrocolloid matrix pectin, gelatin & sodium carboxy methyl cellulose (nacmc) used for pressure ulcers or dry wounds ce, iso & fda approved with 2.5mm thickness : size 15x15cm,self adhesive absorbent surgical dressing with soft silicone adhesive/ safetac technology wound contact layer designed for exuding wounds with polyurethane foam as backing material, wound pad absorption layer made up of polycrylatefibres& polyester fibres, wound pad comes with flex cut technology, wound pad acquisition & spreading layer made up of polyethylene/polypropylene fibres.a protective release liner made up of polyethylene film. size 10x30 cm,self adhesive absorbent surgical dressing with soft silicone adhesive/ safetac technology wound contact layer designed for exuding wounds with polyurethane foam as backing material, wound pad absorption layer made up of polycrylatefibres& polyester fibres, wound pad comes with flex cut technology, wound pad acquisition & spreading layer made up of polyethylene/polypropylene fibres.a protective release liner made up of polyethylene film. size 10x25 cm,semen diluting fluid,semipermeable waterproof plastic wound dressing with silver,sensor cassette,serum creatinine kits (erba),sfiol with 10.0 nylon /polypropylene suture double armed with one straight &one armed cutting needle,shimers strips (tear strips),short handle laryngoscope,sics blades cresent 2.6,sics blades entry 2.8,sics blades extension 5.2mm,sics blades side port 15°,silcon foam 3 layer 10x20cm,silicon band,silicon band 240 (2.5mm),silicon foam 3 layer 20x40cm,silicon foam 3 layer 40x40cm,silicon foam border sacram ag 3 layer 18x18cm,silicon foam border sacram ag 3layer23x23cm,silicon gel sheet size: 12x6cm,silicon gel sheet size: 15x12cm,silicon oil 1500 cts,silicon oil 5000 cts,siliconised et tube plain sizes 2 to 6.5mm,silk protein & antimicrobial nanosilver based sterile surgical wound dressing sheet (10cmx10cm),silk protein & antimicrobial nanosilver based sterile surgical wound dressing sheet (10cmx25cm),silk protein & antimicrobial nanosilver based sterile surgical wound dressing sheet (20cmx25cm),silk protein & antimicrobial nanosilver based sterile surgical wound dressing sheet (20cmx40cm),silk protein & antimicrobial nanosilver based sterile surgical pu foam dressing (10cmx10cm non adhesive),silk protein & antimicrobial nanosilver based sterile surgical pu foam dressing (20cmx20cm non adhesive),silk protein & antimicrobial nanosilver based sterile surgical pu foam dressing (5cmx5cm non adhesive),silk protein & antimicrobial silver based sterile surgical mesh wound dressing (10cmx10cm),silk protein & antimicrobial silver based sterile surgical mesh wound dressing (10cmx25cm),silk protein & antimicrobial silver based sterile surgical mesh wound dressing (20cmx25cm),silk protein & antimicrobial silver based sterile surgical mesh wound dressing (20cmx40cm),silk protein & based sterile non adherent gauze dressing to cover the wounds 10x10cm,silk protein & based sterile non adherent gauze dressing to cover the wounds 10x25cm,silk protein & nanocrystalline silver based highly conformable antimicrobial sterile pu foam adhesive wound dressing with border 10x10cm,silk protein & nanocrystalline silver based highly conformable antimicrobial sterile pu foam adhesive wound dressing with border 15x15cm,silk protein & nanocrystalline silver based highly conformable antimicrobial sterile pu foam adhesive wound dressing with border 7.5x7.5cm,silk protein & nanocrystalline silver based sterile,non adherent, antimicrobial gauze dressing 10x25cm,silk protein and antimicrobial nanosilver based sterile surgical particle wound dresing 10ml vial,silk protein and antimicrobial nanosilver based sterile surgical particle wound dresing 2ml vial,silk protein and antimicrobial nanosilver based sterile surgical particle wound dresing 5ml vial,silk protein and nanocrystalline silver based sterile water repellent non woven surgical wound dressing with adhesive border and center non adherent absorbent layer 10x20cm,silk protein and nanocrystalline silver based sterile water repellent non woven surgical wound dressing with adhesive border and center non adherent absorbent layer 10x25cm,silk protein and nanocrystalline silver based sterile water repellent non woven surgical wound dressing with adhesive border and center non adherent absorbent layer 15x15cm,silk protein and nanocrystalline silver based sterille antimicrobial water repelent non woven surgical wound dressing with adhesive border and centre non adherent absorbent layer 10x20cm,silk protein and nanocrystalline silver based sterille antimicrobial water repelent non woven surgical wound dressing with adhesive border and centre non adherent absorbent layer 10x25cm,silk protein and nanocrystalline silver based sterille antimicrobial water repelent non woven surgical wound dressing with adhesive border and centre non adherent absorbent layer 15x15cm,silk protein based highly conformable soft sterile pu foam wound dressing with adhesive border 10x10cm,silk protein based highly conformable soft sterile pu foam wound dressing with adhesive border 15x15cm,silk protein based highly conformable soft sterile pu foam wound dressing with adhesive border 7.5x7.5cm,silk protein based highly conformable soft,sterile,water proof pu foam adhesive wound dressing with antiscarring properties 10x20cm,silk protein based highly conformable soft,sterile,water proof pu foam adhesive wound dressing with antiscarring properties 10x25cm,silk protein based highly conformable soft,sterile,water proof pu foam adhesive wound dressing with antiscarring properties 15x15cm,silk protein based sterile surgical particle wound dressing 10ml vial,silk protein based sterile surgical particle wound dressing 2ml vial,silk protein based sterile surgical particle wound dressing 5ml vial,silk protein based sterile surgical pu foam (20cmx20cm non adhesive),silk protein based sterile surgical pu foam dressing (5cmx5cm non adhesive),silk protein based sterile surgical pu foam dressing(10cmx10cm non adhesive),silk protein based sterile surgical wound dressing sheet (10cmx10cm),silk protein derived meshed wound dressing loaded with silver (meshed ag) size: 10x10cm,silk protein derived meshed wound dressing loaded with silver (meshed ag) size: 10x25cm,silk protein derived meshed wound dressing loaded with silver (meshed ag) size: 20x25cm,silk protein derived meshed wound dressing loaded with silver (meshed ag) size: 20x40cm,silk protein derived meshed wound dressing sheet for non infected high exuding wounds (meshed) size: 10x10 cm,silk protein derived meshed wound dressing sheet for non infected high exuding wounds (meshed) size: 10x25 cm,silk protein derived meshed wound dressing sheet for non infected high exuding wounds (meshed) size: 20x25 cm,silk protein derived meshed wound dressing sheet for non infected high exuding wounds (meshed) size: 20x40 cm,silk protein derived microbicidal dusting powder with silver (dusting powder),silk protein derived microbicidal dusting powder with silver (dusting powder),silk protein derived microbicidal dusting powder with silver (dusting powder),silk protein derived ointment loaded with asiaticoside and silver 10gm,silk protein derived ointment loaded with asiaticoside and silver 25gm,silk protein derived ointment loaded with asiaticoside and silver 50gm,silk protein derived sterile surgical meshed wound dressing (20cmx25cm),silk protein derived sterile surgical meshed wound dressing (20cmx40cm),silk protein derived surgical dressing size: :10x10,silk protein derived surgical dressing size: 10x25,silk protein derived surgical dressing size: 20x25,silk protein derived wound dressing loaded with silver (ag) size: 10x10cm,silk protein derived wound dressing loaded with silver (ag) size: 10x25cm,silk protein derived wound dressing loaded with silver (ag) size: 20x25cm,silk protein derived wound dressing loaded with silver (ag) size: 20x40cm,silk protein,asiaticoside and povidone iodine based broad spectrum topical antiseptic and antimicrobial wound healing ointment 100gm,silk protein,asiaticoside and povidone iodine based broad spectrum topical antiseptic and antimicrobial wound healing ointment 25gm,silk protein,asiaticoside and povidone iodine based broad spectrum topical antiseptic and antimicrobial wound healing ointment 50gm,silver coated antimicrobial barrier dressing with silcryst nanocrystal silver consisting of a rayon/polyester non woven core laminated (by sonic welds) between an upper & lower layer of nanocrystalline silver coated high density polyethylene mesh 10cmx10cm,silver coated antimicrobial barrier dressing with silcryst nanocrystal silver consisting of a rayon/polyester non woven core laminated (by sonic welds) between an upper & lower layer of nanocrystalline silver coated high density polyethylene mesh 10cmx120cm roll,silver nitrate,simcoe cannula 23g,single blood bag cpda,single piece ostomy appliance having triple hydrocolloid skin barrier comprising of pectin, gelatin and sodium carboxy methyl cellulose, elastomeric polymers with 12 transparent drainable pouch and one sided comfort panel and tail clip size: 19 64mm stoma opening active life,single piece ostomy appliance with triple hydrocolloid based flexible skin barrier comprising gelatin, pectin, nacmc and elastomeric polymers with charcoal filter embided comfort panel with integrated dotted tail closure 20 70mm,single use coude tip bougie with size 15fr ,,single use portable free npwt kit with 4 layer absorbent pads to manage up to 600ml exudates for 7 days pico 10cmx40cm,single use portable free npwt kit with 4 layer absorbent pads to manage up to 600ml exudates for 7 days pico size: 10cmx20cms,single use portable free npwt kit with 4 layer absorbent pads to manage up to 600ml exudates for 7 days pico size: 10cmx30cm,single use portable free npwt kit with 4 layer absorbent pads to manage up to 600ml exudates for 7 days pico size: 15cmx15cm,single use portable free npwt kit with 4 layer absorbent pads to manage up to 600ml exudates for 7 days pico size: 15cmx20cm,single use portable free npwt kit with 4 layer absorbent pads to manage up to 600ml exudates for 7 days pico size: 15cmx30cm,single use portable free npwt kit with 4 layer absorbent pads to manage up to 600ml exudates for 7 days pico size: 20cmx20cm,single use portable free npwt kit with 4 layer absorbent pads to manage up to 600ml exudates for 7 days pico size: 25cmx25cm,sinko bulb with adapter,skin care & cleaning foam ethanol ip 3% v/v benzalkonium chloride solution ip 0.5% v/v equivalent to benzalkonium chloride 0.25% w/v,skin grafting blade (downs blade),skin marking pen,skin staple remover,skin stapler (non stop feed for reducing jam ,pre cock function, sharper staples, taller staples & window for better visibility )35 pinsskin stapler,sodalime absorber dragger,sodaline absorb ge machine,sodiium chloride,sodium acetate (anhydrous),sodium citrate buffer ph 6 1ltr,sodium di hydrogen phosphate (monohydrate) 25kg,sodium heparin vaccutainer,sodium hypochloride solution 5%,sodium nitroprusside 5kg,sodium percarbonate peroxyhydrate(45gm), inert ingredients(55gm) antimicrobial spectrum,soft polypropylene mesh with blue color / contrast strips every 2 cm, light weight with 40 to 45 mg/10cm2 with 1.5 to 2mm pore size for hernia repair size 15cm x 15cm,soft polypropylene mesh with blue color / contrast strips every 2 cm, light weight with 40 to 45 mg/10cm2 with 1.5 to 2mm pore size for hernia repair size 25cm x 25cm,soft polypropylene mesh with blue color / contrast strips every 2 cm, light weight with 40 to 45 mg/10cm2 with 1.5 to 2mm pore size for hernia repair size 30cm x 30cm,soft polypropylene mesh with blue color / contrast strips every 2 cm, light weight with 40 to 45 mg/10cm2 with 1.5 to 2mm pore size for hernia repair size 7.6 cm x 15cm,soft roll 3 cast padding 10cm,soft roll 4 cast padding 10cm,soft roll 4 cast padding 12cm,soft roll 5 cast padding 15cm,soft roll 6 cast padding 15cm,soft roll 6 cast padding 18cm,solution pack basic,spatula brush,specificaion for dleukocyte filters red blood cell lab 1) filter material : highly porous polyurethane materil to ensure quality of red cell during filtration. 2) filtration efficiency : residual wbc count should de less than 5x 10e5 3) hemolysis : percentage of emolysis should be less than 0.8% 4) housing material : polycarbonate 5) dimension : 93x 70 x 15mm 6) housing volume 38ml 7) air vent close : 0.2 um hydrophobic membrane and should be able to open and 8) no of air vent filter: 2 air vents, one on the tube above the filter and one on the housing to ensure the recovery of comoonents 9) ethylene oxide gas.,specimen container 1000ml,square adhesive bandage 03cmx03cm,standarad opaque drainable pouch 12, with charcoal filter embeded with two sided hydrophobic natural fiber comfort panel with integrated dotted velcro tail closure 70mm,standarad opaque drainable pouch 12, with charcoal filter embeded with two sided hydrophobic natural fiber comfort panel with integrated dotted velcro tail closure 57mm,standarad opaque drainable pouch 12, with charcoal filter embeded with two sided hydrophobic natural fiber comfort panel with integrated dotted velcro tail closure 45mm,stapler reloads for oen surgery universal open linear cutter catridge with selectable closed staple height of 1.5mm, 1.8mm and 2mm having 6 row (3 on either side of the cut line), 3d staple technology with staple line of 61mm and cut line of 58mm,staplers reloads for open surgery universal open linear cutter catridge with selectable closed staple height of 1.5mm,1.8mm and 2mm having 6 row (3 on either side of the cut line), 3d staple technology with staple line of 81 mm and cut line of 78mm,steri strips wound closure ( 1/4 inx 3 in 6mm x 75mm),sterile antiseptic sponge with applicator 20ml,sterile blade handle size: 4,sterile bone wax weight 2.5 grams suture,sterile c arm cover,sterile collagen particles with mupirocin and metronidazole 05ml,sterile dehydarated human amnion chorion membrane 12x6 cm ( plain),sterile dehydarated human amnion chorion membrane with polyhexamethylenebiguanide 0.5% 12x6 cm,sterile dehydarated human amnion chorion membrane with polyhexamethylenebiguanide 0.5% 5x5 cm,sterile dehydarated human amnion chorion membrane with polyhexamethylenebiguanide 0.5% 8x6 cm,sterile disposable bandage contact lens,sterile disposable gloves 8,sterile disposable lint free eye drapes,sterile disposable lint free surgeon gown,sterile disposable lint free table top drapes,sterile disposable lint patient surgeon gown,sterile disposable powder free gloves (no 6.5/7),sterile disposable tubrculin syringe with needle 1ml 26g,sterile eyelid glasses,sterile heat moisture exchange bacetrial viral filter,sterile human amnion chorion and phmb powder 3gm,sterile human amnion chorion and phmb powder 6gm,sterile human amnion chorion and phmb powder ( micronised),sterile medicaed collagen sheet (collagen with silver),sterile pva sponge spear (mercoel) 2packets (each packet contains 5 spear),sterile spine drape,sterile transparent non glare tear resistant conformable surgical incise drapes made of adhesive polyurethane film (opsite incise) size: 10cm x 14cm,sterile transparent non glare tear resistant conformable surgical incise drapes made of adhesive polyurethane film (opsite incise) size: 15cmx28cm,sterile transparent non glare tear resistant conformable surgical incise drapes made of adhesive polyurethane film (opsite incise) size: 30cmx28cm,sterile transparent non glare tear resistant conformable surgical incise drapes made of adhesive polyurethane film (opsite incise) size: 40cmx42cm,sterile transparent non glare tear resistant conformable surgical incise drapes made of adhesive polyurethane film (opsite incise) size: 45cmx28cm,sterile transparent non glare tear resistant conformable surgical incise drapes made of adhesive polyurethane film (opsite incise) size: 45cmx55cm,sterillium solution,steristrip (1547) 3m,sterod mechine autoclave mechine cassets,stich bonded hydrofiber burns dressings with 1.2 impregnated ionic silver with sustained and on demand antimicrobial activity with high exudate management capability with a wear time of 21 days glove size: 1 (aquacel ag burn dressings),stich bonded hydrofiber burns dressings with 1.2 impregnated ionic silver with sustained and on demand antimicrobial activity with high exudate management capability with a wear time of 21 days glove size: 2 (aquacel ag burn dressings),stich bonded hydrofiber burns dressings with 1.2 impregnated ionic silver with sustained and on demand antimicrobial activity with high exudate management capability with a wear time of 21 days glove size: 3 (aquacel ag burn dressings),stich bonded hydrofiber burns dressings with 1.2 impregnated ionic silver with sustained and on demand antimicrobial activity with high exudate management capability with a wear time of 21 days glove size: 4 (aquacel ag burn dressings),stich bonded hydrofiber burns dressings with 1.2% impregnated ionic silver with sustained and on demand antimicrobial activity with high exudate management capability with a wear time of 21 days glove size: 5 (aquacel ag burn dressings),stich bonded hydrofiber burns dressings with 1.2% impregnated ionic silver with sustained and on demand antimicrobial activity with high exudate management capability with a wear time of 21 days size: 23 x100cm (aquacel ag burn dressings),stich bonded hydrofiber burns dressings with 1.2 impregnated ionic silver with sustained and on demand antimicrobial activity with high exudate management capability with a wear time of 21 days size: 23x30cm (aquacel ag burn dressings),stich bonded hydrofiber burns dressings with 1.2% impregnated ionic silver with sustained and on demand antimicrobial activity with high exudate management capability with a wear time of 21 days size: 54 x45cm (aquacel ag burn dressings),stich bonded hydrofiber dressing with 1.2% impregnated ionic silver with sustained and demand antimicrobial activity with high exudate management capability and self adherent waterproof moist wound dressing made up of triple hydrocolloid elastomeric polymer matrix pectin, gelatin & sodium carboxy methyl cellulose (nacmc). size 9*10cm,stich bonded hydrofiber dressing with 1.2 impregnated ionic silver with sustained and demand antimicrobial activity with high exudate management capability and self adherent waterproof moist wound dressing made up of triple hydrocolloid elastomeric polymer matrix pectin, gelatin & sodium carboxy methyl cellulose (nacmc). size 9x15cm,stich bonded hydrofiber dressing with 1.2% impregnated ionic silver with sustained and demand antimicrobial activity with high exudate management capability and self adherent waterproof moist wound dressing made up of triple hydrocolloid elastomeric polymer matrix pectin, gelatin & sodium carboxy methyl cellulose (nacmc). size 9*25cm,stich bonded hydrofiber dressing with 1.2% impregnated ionic silver with sustained and demand antimicrobial activity with high exudate management capability and self adherent waterproof moist wound dressing made up of triple hydrocolloid elastomeric polymer matrix pectin, gelatin & sodium carboxy methyl cellulose (nacmc). size 9x30cm,stich bonded hydrofiber dressings with 1.2 impregnated ionic silver with sustained and on demand antimicrobial activity with high exudate management capability size: 10x10cm (aquacel ag extra),stich bonded hydrofiber dressings with 1.2 impregnated ionic silver with sustained and on demand antimicrobial activity with high exudate management capability size: 20x30cm (aquacel ag extra),stich bonded hydrofiber dressings with 1.2 impregnated ionic silver with sustained and on demand antimicrobial activity with high exudate management capability size: 5x5cm (aquacel ag extra),sting free adhesive releaser/remover with 100 blend of hexamethyldisiloxane, hmdso, octamethyltrisiloxane & d5, sting free, clear with flexible film free from alcohol, preservatives used for removal of strong adhesive dressings, helps in removal without pain & skin tear 50ml,sting free barrier spray with 100 blend of hexamethyldisiloxane, hmdso, trimethylated silica, trimethylsiloxysilicate (tms) and zanthalene sting free, hypoallergenic, clear with flexible barrier. provides on going protection for 72 hours & chg compatible, free from oil, alcohol, fragrance & preservatives 50ml,stone burr (dental burr),styllet (adult),subglottic et tube with reversed profile soft cuff sizes 6 to 9,suction cathather 12fr,suction cathather 14fr,suction cathather 16fr,suction cathather no 10,suction cathather no:8,suction catheter size: 10,suction catheter size: 12,suction catheter size: 14,suction catheter size: 6,suction catheter size: 8,suction drain 14 f 1x1,suction trephines corneal,suction tubes,sulphuric acid 10kg,super absorbent dressing,surface disinfectant solution polymeric biguanide hydrochloride less than 10 alkyl dimethyl benzyl ammonium chloride & didecyl dimethyl ammonium chloride less than 10 ( bactericidal, virucidan, fungicida& biodegradability),surgical marker pen,surgical spirit 1 ltrs chemical,symblepharon shell,synethic non absorbable braided silk black size 5.0 with 13mm 3/8 circle reverse cutting ethiprime needle with suture length 90cms,synthertic absorbable suture antibacterial, triclosan coated polygactin 910 size: 1 0 with 36mm 1/2 circle reverse cutting os needle, suture length 90cm suture,synthertic absorbable sutures antibacterial, triclosan coated polyglactin 910 size: 2 0 with 31mm 1/2 circle round body needle, suture length 90cm suture,synthetic absorable surgical suture polyglactin 910 size 6 0 with 8mm 1/4 circle spatulated micropoint double needle(0.7 metric), suture length 45cm,synthetic absorbable suture antibacterial, triclosan coated polygactin 910 size: 3 0 with 20mm 1/2 circle round body needle suture length 70cm suture,synthetic absorbable suture coaed polyglactin 910 size: 2 0 with 19mm skki needle round body needle, suture length 45 cm suture,synthetic absorbable suture / antibacterial, triclosan coated polydioxanone size: 1 with 50mm 1/2 circle round body needle, suture length 150 cm loop suture,synthetic absorbable suture materials antibacterial, triclosan coated polyglecaprone 25 size: 3 0 with 26mm 1/2 circle oval round body visi black jb needle, suture length 70cm suture,synthetic absorbable suture materials coated polyglecaprone 25 size 2 0 with 30mm 1/2 circle round body needle, suture length 70cm suture,synthetic absorbable suture materials coated polypropylene 25 with 25mm 3/8 circle reverse cutting ethiprime needle, suture length 70cm suture size 3 0,synthetic absorbable suture materials antibacterial, triclosan coated polyglecaprone 25 size 3 0 with 24mm 3/8 circle reverse cutting ethiprime needle,suture length 70 cm monofilament undyed suture,synthetic absorbable sutures antibacterial , triclosan coated polygactin 910 size: 1 with 40mm 1/2 circle round body gs needle, suture length 90cm suture,synthetic absorbable sutures antibacterial , triclosan coated polyglactin 910 size: 1 with 40mm 1/2 circle reverse cutting, os needle, suture length 90cm suture,synthetic absorbable sutures antibacterial, triclosan coated polydioxanone size 4 0 with 17mm 1/2 circle round body needle, suture length 70 cm suture,synthetic absorbable sutures antibacterial, triclosan coated polydioxanone size: 3 0 with 17mm 1/2 circle round body needle, suture length 70cm suture,synthetic absorbable sutures antibacterial, triclosan coated polyglactin 910 with 16mm, 5/8 circle cutting, needle, suture length 45cm suture size: 4 0,synthetic absorbable sutures antibacterial, triclosan coated polyglactin 910 size: 1 with 23mm 1/2 circle reverse cutting heavy needle , suture length 70cm,synthetic absorbable sutures antibacterial, triclosan coated polyglactin 910 size: 1 0 with 30mm 1/2 circle round body needle, suture length 90 cm,synthetic absorbable sutures antibacterial, triclosan coated polyglactin 910 size: 1 0 with 40mm 1/2 circle round body needle, suture length 90 cm,synthetic absorbable sutures antibacterial, triclosan coated polyglactin 910 size: 3 0 with 25mm 3/8 circle cutting, needle, suture length 90cm,synthetic absorbable sutures antibacterial, triclosan coated polyglactin 910 size: 4 0 with 20mm 1/2 circle round body needle, suture length 70 cm suture,synthetic absorbable sutures coated polyglactin 910 size: 1 with 45mm 1/2 circle blunt taper point (heavy) ethiguard needle, suture length 90cm suture,synthetic absorbable sutures polyglecaprone 25 with 13mm needle 3/8 circle round body p 3 prime needle, suture length 45cm size: 5 0,synthetic absorbable sutures / antibacterial, triclosan coated polydioxanone size 1 with 22mm 1/2 circle reverse cutting needle,suture length 45 cm,synthetic absorbable sutures / antibacterial, triclosan coated polydioxanone size 3 0 with 20mm 1/2 circle round body needle,suture length 70 cm suture,synthetic absorbable sutures / antibacterial, triclosan coated polydioxanone size 4 0 with 20mm 1/2 circle round body needle,suture length 70 cm suture,synthetic absorbable sutures coated plolydioxanone size 2 0 with 1/2 circle round body mh 1 with 31mm needle, suture length 70 cm suture,synthetic absorbable sutures materials antibacterial, triclosan coated polyglecaprone 25 size: 4 0 with 16mm 3/8 circle reverse cutting ps 3 prime needle , suture length 70cm suture,synthetic absorbable sutures materials antibacterial, triclosan coated polyglecaprone 25 size: 5 0 undyed with 16mm 3/8 circle reverse cutting ps 3 prime needle , suture length 70cm suture,synthetic fast absorbable sutures coated polyglactin 910 rapide absorbable size: 3 0 with 22mm 1/2 circle cutting needle, suture length 70cm suture,synthetic fast absorbable sutures coated polyglactin 910 rapide absorbable size: 5 0 with 11mm 3/8 circle reverse cutting needle, suture length 45cm suture,synthetic non absorbable monofilament polyamide black surgical suture size 10.0 with 6mm 3/8 circle micro point spatulated 38cm double arm suture,synthetic non absorbable monofilament polyamide black surgical suture size 8.0 with 6.5mm 3/8 circle micro point spatulated 38cm double arm suture,synthetic non absorbable monofilament polyamide black surgical suture size 9.0 with 6.5mm 3/8 circle micro point spatulated 38cm double arm suture,synthetic non absorbable polypropylene sutures with 17mm 1/2 circle round body needle, suture length 70cm suture double needle size: 5 0,synthetic non absorbable polypropylene sutures with 13mm, 3/8 circle round body c 1 (282 microns) double needle, suture length 60cm suture size: 6 0,synthetic non absorbable polypropylene sutures size: 1 with 40mm 1/2 circle round body heavy needle, suture length 70cm suture,synthetic non absorbable polypropylene sutures size: 3 0 with 25mm 1/2 circle round body needle, suture length 70cm,synthetic non absorbable polypropylene sutures size: 5 0 with 13mm 1/2 circle taper point tf double needle, suture length 60cm suture,synthetic non absorbable monofilament nylon sutures (black polyamide) size: 3 0 with 16mm 3/8 circle ethiprime needle, sutures length 70cm suture,synthetic non absorbable monofilament nylon sutures (black polyamide) size: 4 0 with 16mm 3/8 circle ethiprime needle, sutures length 90cm suture,synthetic non absorbable monofilament nylon sutures (black polyamide) size: 6 0 with 13mm 3/8 circle cutting pc 1 ethiprime needle, sutures length 70cm,synthetic non absorbable monofilament nylon sutures (black polyamide) size: 6 0 with 26mm 3/8 circle cutting needle, sutures length 70cm suture,synthetic non absorbable monofilament nylon sutures (polyamide 6) with 26mm 3/8 circle reverse cutting needle suture length 70cm suture size: 3 0,synthetic non absorbable polybutylate coated polyster braided suture size: 2 0 with 17mm, 1/2 circle tapercut double needle, suture length 90cm green braided with polymer pledgets 6mm x 3mm x 1.5mm suture,synthetic non absorbable polypropylene sutures size: 1 0 with 40mm 1/2 circle round body needle, sutures length 150 cm (loop) suture,synthetic non absorbable polypropylene sutures size: 1 0 with 40mm 1/2 circle round body needle, sutures length 150 cm (loop) suture,synthetic non absorbable polypropylene sutures size: 3 0 with 22mm 3/8 circle cutting needle, sutures length 70 cm suture,synthetic non absorbable polypropylene sutures size: 4 0 with 16mm 3/8 circle cutting needle, sutures length 70 cm suture,synthetic non absorbable polypropylene sutures size: 6 0 with 12mm 3/8 circle reverse cutting needle, sutures length 45 cm suture 1x12 foils,synthetic non absorbable monofilament nylon sutures (black polyamide) size: 1 with 45mm 1/2 circle reverse cutting heavy needle suture length 100cm suture,synthetic non absorbable polypropylene suture size 2 0 with 30mm 1/2 circle round body needle suture length 90cm suture,synthetic non absorbable polypropylene sutures size 1 with 1/2 circle round body[heavy], 48mm needle, suture length 150 cms loop,synthetic non absorbable polypropylene sutures size 1 with 1/2 circle taper cut [heavy] 31mm needle, 100cms length,synthetic non absorbable polypropylene sutures size 4 0 with 1/2 circle round body, 17mm needle, suture length 70 cms,syring 10cc with leur lock,syringe 1 cc with leur lock,syringe 2 cc with leur lock,syringe 20cc with leur lock,t piece,ta stapler reload with no knife and with directional stapling technology 60 green,ta stapler with single handle operation and directional stapling technology,tab formalin,tail closure clip with insert for single piece ostomy appliance,tegaderm big dressing pad,tegaderm small dressing pad,terminal transfer ribbon (size: 80mm x 74 meters, 1,terpentine oil,test tubes,thin hydrocolloid dressing with high permeability capabilities & water proof, transparent, wound mapping grid pattern, no pectin or gelatin dosage form and strength 10x10cm,thin hydrocolloid dressing with high permeability capabilities & water proof, transparent, wound mapping grid pattern, no pectin or gelatin dosage form and strength 20x20cm,thin perforated & transparent polyurethane film wound contact layer with polyamide net and safetac technology. usage upto 14 days. size 17x25 cm,thin triple self adherent bordered soft silicone dressing with safetac layer, thin flexible absorbent foam with non woven layer of viscose & polyester and backing polyurethane backing film as water, bacterial and viral barrier. with soft silicone wound contact layer5x12.5cm,three way canula,three way extention tube 100cm,three way extention tube 10cm,three way extention tube 25cm,three way extention tube 50cm,three way extention tube 75cm,three way stop cock,tincture benzoin solution,tissue roll,tissue separating mesh made of 2 layers (for perietal and veceral wiyh oxidised regerative cellulose) of polyglecaprone 25 with polydioxanone and polypropylene with 3mm pore size oval shaped size 10cm x 15,tissue separating mesh made of 2 layers (for perietal and veceralwiyh oxidised regerative cellulose) of polyglecaprone 25 with polydioxanone and polypropylene with 3mm pore size oval shaped size 15cm x20cm,tissue separating mesh made of 2 layers (for perietal and veceralwiyh oxidised regerative cellulose) of polyglecaprone 25 with polydioxanone and polypropylene with 3mm pore size, size 15cm x15cm mesh,tissue separating multilayer mesh for intra abdominal open and laparoscopic ventral hernia repair. soft polypropylene mesh clubbed with polydiaxanone layer and has an oxidized regenerated cellulose on visceral side.(size 20cmx25cm),top & top quadruple blood bag cpd sagm,top and bottom quadruple blood bag cpd sagm with needle injury protector luer adapter holder & diversion bag,topical monomeric ( 2 octyl cyanoacrylate) skin adheshive single use vial with applicator, 0.36 ml,topical monomeric (2 ocyl cyanoacrylate) skin adhesive single use vial with applicator, 0.50ml,topical solution of heaprin sodium 1000 iu /ml (each ml contents heaprin sodium ip 1000iu/ml, absolute alcohol ip 10% v/v, topical solution base q.s,torch cell big,torch cell medium,tourniquet chemical,tpha test kit,tracheostomy tube profile soft cuff with suction port sizes 6,7,7.5,8,8.5,tracheostomy tubes size: 36,tracheostomy tubes size: 6.5,tracheostomy tubes size: 7,tracheostomy tubes size: 7.5,tracheostomy tubes size: 8,traction pulley,tranparent cannula site dressings transparent polyurethane impervious to bacteria, but permeable to water vapor malutaining transparency, self adhesive (7cmx8.5cm) with a chlorhexidine gluconate gel layer impreguated (2cmx2cm) an iv line securing adhesive.,tranparent cannula site dressings transparent polyurethane impervious to bacteria, but permeable to water vapor malutaining transparency, self adhesive (8.5cmx11.5cm) with a chlorhexidine gluconate gel layer impreguated (3cmx4cm) an iv line securing adhesive.,translucent foam dressings with protective barrier against water, bacteria and viruses, water proof or shower proof with perforated with gentle, skin friendly silicone adhesive, easy to apply & re position, ce , iso & fda approved 10x20cm,translucent foam dressings with protective barrier against water, bacteria and viruses, water proof or shower proof with perforated with gentle, skin friendly silicone adhesive, easy to apply & re position, ce , iso & fda approved 5.5x12cm,transparent anesthesia face mask 1,transparent anesthesia face mask 2,transparent anesthesia face mask 3,transparent anesthesia face mask 4,transparent anesthesia face mask 5,transparent, semipermeable, breathable, water proof, bacterial and viral barrier, synthetic blood penetration resistance, sterile, polyurethane film reinforced with soft cloth border and notch, non latex, hypoallergenic pattern coated acrylic adhesive. it has a picture frame deliver system and complies with iso 10993 standards for biocompatibility.,transperant film dressing frame smile 6cmx7cm,transperent dressing with pad,transpore plastic surgical tape 2,tretinoin 0.13% sol,tri sodium citrate,trichloroacetic acid 10%,trichloroacetic acid 100%,trichloroacetic acid 15%,trichloroacetic acid 35%,triple blood bag cpd sagm 1x450ml,triple blood bag cpda 1x350ml,triple hydrocolloid comprised of gelatin, pectin & nacmc based skin protection paste 57gms,triple hydrocolloid comprised of gelatin, pectin & nacmc based skin protection powder 29.3gms,triple hydrocolloid flexible tape collar skin barrier comprised of gelatin, pectin & nacmc with elastomeric polymers, plasticisers, tackifiers capable of turtlenecking effect and rebounding technology with audible click 57mm,triple hydrocolloid skin barrier where no cutting is required comprised of pectin, gelatin and sodium car boxy methyl cellulose, elastomeric polymers extending turtle necking effect and rebounding memory technology with audible click and flexible tape collar 45mm,triple hydrocolloid skin barrier where no cutting is required comprised of pectin, gelatin and sodium car boxy methyl cellulose, elastomeric polymers extending turtle necking effect and rebounding memory technology with audible click and flexible tape collar 57mm,triple hydrocolloid skin barrier where no cutting is required comprised of pectin, gelatin and sodium car boxy methyl cellulose, elastomeric polymers extending turtle necking effect and rebounding memory technology with audible click and flexible tape collar 70mm,triple layered absorbent foam dressing with polyurethane backing films as water becterial and viral barrier with soft silicone wound cont layer bsi & european c.e approved 20x 20cm,triple layered adhesive hydro cellular foam dressing for superior fluid handling through unique dressing reconstruction with a breathable pink coloured polyurethane film, middle layer highly absorbent hydro cellular foam and a perforated non adherent wound contact layer with a gentle silicone gel adhesive which prevents healing tissue from growing into the dressing minimizing pain on removal and specifically designed shape for sacral region. 21.6cmx23cm,triple layered adhesive hydro cellular foam dressing for superior fluid handling through unique dressing reconstruction with a breathable pink coloured polyurethane film, middle layer highly absorbent hydro cellular foam and a perforated non adherent wound contact layer which prevents healing tissue from growing into the dressing minimizing pain on removal and specifically designed shape for sacral region.,triple layered adhesive hydrocellular foam dressing for superior fluid handling through unique dressing reconstruction with a breathable pink coloured polyurethane film, middle layer highly absorbent hydro cellular foam and a perforated non adherent wound contact layer with a gentle silicone gel adhesive which prevents healing tissue from growing into the dressing minimizing pain on removal and specifically designed shape for sacral region. 16.8cmx17.1cm,triple layered antimicrobial adhesive hydrocellular foam dressing for superior fluid handling through unique dressing reconstruction with a breathable pink coloured polyurethane film, middle layer highly absorbent silver sulfadiazine containing hydrocellur foam and a perforated non adherent wound contact layer which prevents healing tissue from growing into the dressing minimizing pain on removal with a gentile silicone gel adhesive. 10x10cm,triple layered antimicrobial adhesive hydrocellular foam dressing for superior fluid handling through unique dressing reconstruction with a breathable pink coloured polyurethane film, middle layer highly absorbent silver sulfadiazine containing hydrocellur foam and a perforated non adherent wound contact layer which prevents healing tissue from growing into the dressing minimizing pain on removal with a gentile silicone gel adhesive.,triple layered anti microbial foam dressing with activated carbon and sliver content 1.2mg/cm2, active release for 168hrs (7 days) with polyurethane backing film as water, bacterial and viral barrier with soft silicone adhesive technology/ safetac technology. usage upto 7 days. size 20x50 cm,triple layered anti microbial foam dressing with activated carbon and sliver content 1.2mg/cm2, active release for 168hrs (7 days) with polyurethane backing film as water, bacterial and viral barrier with soft silicone adhesive technology/ safetac technology. usage upto 7 days. size 10x20 cm,triple layered anti microbial foam dressing with activated carbon and sliver content 1.2mg/cm2, active release for 168hrs (7 days) with polyurethane backing film as water, bacterial and viral barrier with soft silicone adhesive technology/ safetac technology. usage upto 7 days. size 20x20 cm,triple layered anti microbial foam dressing with activated carbon and sliver content 1.2mg/cm2, active release for 168hrs (7 days) with polyurethane backing film as water, bacterial and viral barrier with soft silicone adhesive technology/ safetac technology in heel shape. usage upto 7 days. size 13x20cm,triple layered antimicrobial non adhesive hydro cellular foam dressing for superior fluid handling through unique dressing reconstruction with a breathable pink coloured polyurethane film, middle layer highly absorbent silver sulfadiazine containing hydro cellular foam and a perforated non adherent wound contact layer which prevents healing tissue from growing into the dressing minimizing pain on removal. 15cm x15cm,triple layered antimicrobial non adhesive hydrocellular foam dressing for superior fluid handling through unique dressing reconstruction with a breathable pink coloured polyurethane film, middle layer highly absorbent silver sulfadiazine containing hydrocellular foam and a perforated non adherent wound contact layer which prevents healing tissue from growing into the dressing minimizing pain on removal. 20x20cm,triple layered heel shaped non adhesive hydrocellular foam dressing for superior fluid handling through unique dressing reconstruction with a breathable pink coloured polyurethane film, middle contact layer with a gentle silicone gel adhesive which prevents healing tissue from growing into the dressing minimizing pain on removal and specifically designed shape for heel, elbow, knee, chin area. 23x23 .2cm,triple lumen central venous catheter, with kink resistant j tip nitinol guide wire, introducer needle with luer lock syringe, three way stop cock for multiple infusions 4.5 fr 8 cm,triple lumen central venous catheter, with kink resistant j tip nitinol guide wire, introducer needle with luer lock syringe, three way stop cock for multiple infusions 5.5 fr 8 cm,triple lumen cvp set 7fr,triple sugar iron agar,trocar optically guided bladeless trocar 05mm with bilateral tissue separators,length 150mm, optical tip to eliminate blind entry ,clear ribbed cannula,recessed stopcock valve,funnel shaped housing,duckbill secondry seal ,integrated universal seal that eliminates the use of reducer.(b5xt),trocar optically guided bladeless trocar 12mm with bilateral tissue separators,length 100mm, optical tip to eliminate blind entry ,clear ribbed cannula,recessed stopcock valve,funnel shaped housing,duckbill secondry seal ,integrated universal seal that eliminates the use of reducer.,trocar optically guided bladeless trocar 12mm with bilateral tissue separators,length 150mm, optical tip to eliminate blind entry ,clear ribbed cannula,recessed stopcock valve,funnel shaped housing,duckbill secondry seal ,integrated universal seal that eliminates the use of reducer.,trocar optically guided bladeless trocar 5mm with bilateral tissue separators,length 100mm, optical tip to eliminate blind entry ,clear ribbed cannula,recessed stopcock valve,funnel shaped housing,duckbill secondry seal ,integrated universal seal that eliminates the use of reducer.,turpentine oil 100ml,typhidot rapid test,ultra sound gel 5000 ml,umbilical card clamp,umbilical cotton tape length 75cm x 3mm,umblical catheter single lumen 3.5,umblical catheter single lumen 4.5,umblical catheter single lumen – 5,umblical catheter single lumen 4,umblical cotton tape,umblical venous catheter 3.5,umblical venous catheter 4,umblical venous catheter 5,uncoated lightweight monofilament polypropylene mesh with hydro gel barrier made of bioresorbable coating [sodium hyaluronate (ha) + carboxymethylcellulose (cmc) + polyethylene glycol (peg) on visceral side and coated by bioresorbable pga fibres on both sides for laparoscopic ventral hernia repair, circle shaped size: 20.3 cm,uncoated lightweight monofilament polypropylene mesh with hydrogel barrier made of bioresorbable coating [sodium hyaluronate (ha) + carboxymethylcellulose (cmc) + polyethylene glycol (peg) on visceral side and coated by bioresorbable pga fibres on both sides for laparoscopic ventral hernia repair, circle shaped size: 15.2cm,underwater seal bag,unique 3d polyrethane foam non adhesive with sustained realease of silver ions (20 x 50),unique 3d polyrethane foam non adhesive with sustained realease of silver ions ( 20 x 20),unique 3d polyrethane foam non adhesive with sustained realease of silver ions (17.5 x 17.5),unique pre shaped poly propylene mesh with pre cut opening to accommodate the spermatic cord with rounded edge size: 6cm x 13.7 cm for open inguinal hernia repair,unique transparent wound dressing consisting of a clear, conformable, absorbent gel and with a novel acrylic polymer pad technology enclosed between an outer low friction, breathable, waterfproof, viral and bacterial barrier film and a perforated wound contact layer coated with moist skin adhesive formulation to provide secure yet gentle adhesion. clear acrylic gel pad size: 14.9 cm x 15.2 cm square.,urea reagent,urinalysis reagent strips 2 para (protien, glucose),urine (cups) container with cap unsterile chemical,urine can (plastic ),urine collection bag (adult),urine strips (10 parameters ) kit,urine strips (2 parameters glucose + ketone bodeies) box,uro bag 1.5 ltrs.,uro bag with uro meter,urosac with urometer,urostomy pouch with non return valve, accuseal tap and spout and cap, standard transparent standard with 1 sided comfort panel. size 45mm drainable bags recommended for urostomy output,urostomy pouch with non return valve, accuseal tap and spout and cap, standard transparent standard with 1 sided comfort panel. size 57mm drainable bags recommended for urostomy output,uv protective glasses,v veins stainless steel stripper,vac granfoam dressing large,vac granfoam dressing medium,vac granfoam dressing small,vac track tubing sterile,vac y connector sterile,vaccutainers ( vacuums tube )4ml,valley caurtary mechine patient probe plate adult,valley caurtary mechine patient probe plate pediatric,vangieson staining kit,velox care smart therapy bag of size (60 x 42 cm) with embosed connector, inbuilt temperature sensors and double ended inner therapy bag,velox care smart therapy bag of size (75 x 42 cm) with embosed connector, inbuilt temperature sensors and single ended inner therapy bag,venturi mask,verhoeffs staining kit,vimentien,vitek 2 ast n 235,vitek 2 ast n 406,vitek 2 ast n 407,vitek 2 ast n 628 20 cards / kit,vitek 2 ast n405,vitek 2 id gn test kit 20 cards,vitek 2 id gp test kit 20 cards,vitek 2 id ys 08 20 cards,vitek id yst test kit 20 cards,vitek suspension solution,vitek tubes 2000,volume based lung exerciser with oxygen port to allow supplemental oxygen,warming blanket material that is soft ,conformable ,lightweight ,and radiolucen it is designed to bend in order to accommodate a wide range of surgical procedures and positions.,warming blanket material that is soft ,conformable ,lightweight ,and radiolucent uniform perforation pattern size 84x36in (213x91cm),weil felix rapid test,white tips 0 200 micro lts,wipro ge engstrom expiratory valve,wipro ge engstrom reusable neonatal circuit,wipro ge lullaby warmer skin probe,wipro ge neo flow sensor calble for engstrom ventilator,wipro ge neo flow sensor for engstrom ventilator,wipro ge s5 avance ecg cable,wipro ge s5 avance etco2 sensor,wipro ge s5 avance flow sensor,wipro ge s5 avance nibp cable,wipro ge s5 avance nibp cuff,wipro ge s5 avance sampling line,wipro ge s5 avance water lock/trap,woven fabric, acetate taffeta non elastic tape with strong tensile strength, bi directional tear ability and high adhesive strength, coated with a synthetic copolymer hypoallergenic pressure sensitive acrylate adhesive specifically for securing critical tubings and devices.,yellow tips (for 1000),zimmer dermotome blace,zimmer grafting blade,zinc oxide impregnated role each rold 06m.,zinc paste bandage / 7.5cmx6m,cvc single lumen 7fr coated with 3 nobel metal au,ag, and pd.non releasing coating technology (all sizes)...

South Western Railway - Karnataka

32575721 auction sale of [ pl no. 98050126 ] scrap cond. / released / unserviceable ms scrap such as cbc coupler bodies, released crawler chain of t28, angels channels, signal rods, dash pot, yokes, draft gears sets, ms sheets, winch for lc gate, lever lock, lever rods, pull rods, weighing scale base, suspension tube, bracket cl, housing axle bearing, chequered plates, cbc operating handle, rail cutter, rel hook, anti roll bracket, dradger drum, ms stool, centring disc, ms liners, center pivot washer, brake shoe head, center pivot ring, side frame key, adopter narrow jaw, anti roll bar, rail dolly, fish bolts & nuts, wear plate, adopter wide jaw, suspension rods , equalizing stay, erc clips, wagon doors, rail flange, chain hook, rotary shield with bearings, sab parts, ls beam, hangers, brake levers, brake hangers, ms plates of elastomeric pad, adapter broken, center pivot top, anvil, workdout sab, gib crane, cr reservoir and bracket, plate screws, knuckle, brake cylinder fabricated test rig, gear wheel, anchor link, cash chest, brake beam cut parts, axle box housing, bearing plates, rivette, chirr plate, ms bed plate, ms guage tie plate, structure bar, ms tie plates, slide chaires, ls beam, center pivot, air brake cylinder, knuckle, adopter narrow jaw, tamping tools, track machine parts, brake shoe head, locking plate, long pull rod, operating handle, cbc lock, cbc yoke, lower spring sheet beam, center beams, center pivot washer, screw couplings, lower spring sheet beam, center beams, cut pieces of pipes, buffers, buffer plungers, buffer casings, draw gear hooks, silent blocks, brake cylinder, cut off sheets, collars, iron rods, face plate, bolt & nut stresses, and other items coming under ms scrap on as is where is condition available under the custody of dms 08 ward ap. ( jcb loading permitted ( loc:bin no 0123 at scrap yard ) ...

South Western Railway - Karnataka

32478089 supply of (1). 1 inch anvil suitable to 1 inch impact wrench make proto model j250wp quantity : 3 nos (2) hammer dog suitable to 1 inch impact wrench make proto model j250wp quantity:(one having 2 pcs): 2 sets (3). 1 inch anvil suitable to 1 inch impact wrench make cp : quantity : 2 nos (4) clutch housing suitable to 1 inch impact wrench make cp : quantity :1 no. (5). 3/4 inch anvil suitable to 3/4 inch impact wrench make (1). 1 inch anvil suitable to 1 inch impact wrench make proto model j250wp quantity : 3 nos (2) hammer dog suitable to 1 inch impact wrench make proto model j250wp quantity:(one having 2 pcs): 2 sets (3). 1 inch anvil suitable to 1 inch impact wrench make cp : quantity : 2 nos (4) clutch housing suitable to 1 inch impact wrench make cp : quantity :1 no. (5). 3/4 inch anvil suitable to 3/4 inch impact wrench make ,(1). 1 inch anvil suitable to 1 inch impact wrench make proto model j250wp quantity : 3 nos (2) hammer dog suitable to 1 inch impact wrench make proto model j250wp quantity:(one set having 2 pcs): 2 sets (3). 1 inch anvil suitable to 1 inch impact wrench make cp : quantity : 2 nos (4) clutch housing suitable to 1 inch impact wrench make cp : quantity :1 no. (5). 3/4 inch anvil suitable to 3/4 inch impact wrench make twin hammer of model no.71339 : quantity :3 nos (6). hammer cage suitable to 3/4 inch impact wrench make twin hammer of model no.71339 : quantity :1 nos (7) clutch housing suitable to 3/4 inch impact wrench make twin hammer of model no.71339 : quantity :1 no. (8). 3/4 inch anvil suitable to 1 inch impact wrench make cp model cp7630 : quantity :2 nos. (9). clutch housing suitable to 1 inch impact wrench make cp model cp7630 : quantity :1 no....

South Western Railway - Karnataka

32292586 supply of (1). 1 inch anvil suitable to 1 inch impact wrench make proto model j250wp quantity : 3 nos (2) hammer dog suitable to 1 inch impact wrench make proto model j250wp quantity:(one having 2 pcs): 2 sets (3). 1 inch anvil suitable to 1 inch impact wrench make cp : quantity : 2 nos (4) clutch housing suitable to 1 inch impact wrench make cp : quantity :1 no. (5). 3/4 inch anvil suitable to 3/4 inch impact wrench make (1). 1 inch anvil suitable to 1 inch impact wrench make proto model j250wp quantity : 3 nos (2) hammer dog suitable to 1 inch impact wrench make proto model j250wp quantity:(one having 2 pcs): 2 sets (3). 1 inch anvil suitable to 1 inch impact wrench make cp : quantity : 2 nos (4) clutch housing suitable to 1 inch impact wrench make cp : quantity :1 no. (5). 3/4 inch anvil suitable to 3/4 inch impact wrench make ,(1). 1 inch anvil suitable to 1 inch impact wrench make proto model j250wp quantity : 3 nos (2) hammer dog suitable to 1 inch impact wrench make proto model j250wp quantity:(one set having 2 pcs): 2 sets (3). 1 inch anvil suitable to 1 inch impact wrench make cp : quantity : 2 nos (4) clutch housing suitable to 1 inch impact wrench make cp : quantity :1 no. (5). 3/4 inch anvil suitable to 3/4 inch impact wrench make twin hammer of model no.71339 : quantity :3 nos (6). hammer cage suitable to 3/4 inch impact wrench make twin hammer of model no.71339 : quantity :1 nos (7) clutch housing suitable to 3/4 inch impact wrench make twin hammer of model no.71339 : quantity :1 no. (8). 3/4 inch anvil suitable to 1 inch impact wrench make cp model cp7630 : quantity :2 nos. (9). clutch housing suitable to 1 inch impact wrench make cp model cp7630 : quantity :1 no....

South Western Railway - Karnataka

32176503 supply of (1). 1 inch anvil suitable to 1 inch impact wrench make proto model j250wp quantity : 3 nos (2) hammer dog suitable to 1 inch impact wrench make proto model j250wp quantity:(one having 2 pcs): 2 sets (3). 1 inch anvil suitable to 1 inch impact wrench make cp : quantity : 2 nos (4) clutch housing suitable to 1 inch impact wrench make cp : quantity :1 no. (5). 3/4 inch anvil suitable to 3/4 inch impact wrench make (1). 1 inch anvil suitable to 1 inch impact wrench make proto model j250wp quantity : 3 nos (2) hammer dog suitable to 1 inch impact wrench make proto model j250wp quantity:(one having 2 pcs): 2 sets (3). 1 inch anvil suitable to 1 inch impact wrench make cp : quantity : 2 nos (4) clutch housing suitable to 1 inch impact wrench make cp : quantity :1 no. (5). 3/4 inch anvil suitable to 3/4 inch impact wrench make ,(1). 1 inch anvil suitable to 1 inch impact wrench make proto model j250wp quantity : 3 nos (2) hammer dog suitable to 1 inch impact wrench make proto model j250wp quantity:(one set having 2 pcs): 2 sets (3). 1 inch anvil suitable to 1 inch impact wrench make cp : quantity : 2 nos (4) clutch housing suitable to 1 inch impact wrench make cp : quantity :1 no. (5). 3/4 inch anvil suitable to 3/4 inch impact wrench make twin hammer of model no.71339 : quantity :3 nos (6). hammer cage suitable to 3/4 inch impact wrench make twin hammer of model no.71339 : quantity :1 nos (7) clutch housing suitable to 3/4 inch impact wrench make twin hammer of model no.71339 : quantity :1 no. (8). 3/4 inch anvil suitable to 1 inch impact wrench make cp model cp7630 : quantity :2 nos. (9). clutch housing suitable to 1 inch impact wrench make cp model cp7630 : quantity :1 no....

Public Works Department - Karnataka

32151749 the quotation called for rates to estimate prepare for lab equipments & machineries to government engineering college ramanagra. 1 spring constant setup setup includes  metal stand with 50cm scale fitted.  soft springs 2nos.  slotted weights of 5 pieces ( 50gm each ) 2 set. 2 stefan’s law setup includes  0 6v regulated power supply.  filament bulb 6v.  digital voltmeter and ammeter. 3 photo diode setup setup includes  variable voltage sources ( 0 5 v and 0 15v ) .  photodiode and bulb holding setup.  2mm / 3mm patch cards. 4 numerical aperture of an optical fiber setup setup includes  laser source, 560nm, 5 mw.  optical fiber cable, 1.5m length.  movable fiber holding stand with scale fitted and screen. 5 di electric constant – expt setup setup includes  a setup within built voltage source, 0 30 v digital voltmeter, digital stop clock, resistor, 3 capacitors with different capacitance value.  2 mm patch cords. 6 magnetic field intensity along the axis of a coil setup includes  circular coil setup of 6” dia with a bridge along the axis of the coil fitted with scale.  deflection magnetometer 4”, commutator.  dc ammeter ( 0 5a ) , dc voltage source connecting wires. 7 forced oscillation study setup includes  a modified pohl’s pendulum ( torsion pendulum, ) setup  variable speed motor setup for forced oscillations.  digital frequency meter.  suitable power sources with connecting wires. 8 resistivity by four probe setup includes  a four probe setup with oven ( 1500c ) .  digital or analog thermometer.  semiconductor and conductor samples ( each one ) suitable power sources with connecting wires. 1 c programming laboratory computers ( wi fi enabled ) computers:7thgeneration corei5 / i7, 8gb ram, 1tb hdd, 2gb graphics, 23.8 fhd windows 10 all in one desktop pc with wi fi enabled each / no 1 2 server computer ibm intel xeon e52680, 16core, lga 2011 socket, 64 gb ram, ddr3, 384gb, 600gb each / no 1 3 hp laserjet configuration black and white, print, copy, scan , 1 hi speed usb 2.0 , laser, a4 black and white laser, multifunction printer, perfect for enterprise, print, copy and scan, print speed up to 21 ppm ( black ) preinstalled introductory hp laserjet black cartridge ( ~700 pages ) installation guide, getting started guide, users guide, support flyer, warranty guide printer software and documentation on cd power cord , usb cable each / no 1 4 ups and batteries 10 kva – ups10 kva ups • type: online single phase input & single phase output • capacity : 10kva • backup time: 4 hours or higher • input frequency: 50hz.+ / 5% • input voltage : 160v 270v • output voltage:230v+ / 1%v • output frequency : 50hz+ / 0.2hz. • input power factor: >0.9 • output power factor: 0.8 lag to unity • pf waveform: pure sine wave • alarm: on battery, low battery, ups over load • no. of batteries: compatible • dc voltage ( input ) :compatible • overload capacity : 150% for 1minute , 125% for 10minutes • inverter efficiency : 90% • overall efficiency: 90% • crest factor: 3:01 • regulation: + / 1% • switching frequency : above 20khz • technology: igbt based pwm technology with isolation transformer • warranty : 3 years onsite comprehensive including batteries • protection: automatic discharge protection with self test features, overload surge protection , input fault, cold start, low battery , battery over charge, output short circuit, charging current circuit, inverter over temperature • lcd display : output voltage, output current, load%, output frequency, input voltage, battery voltage • load test: at 100% load on resistive load thd: <3% for linear, <5% for non linear • certification: iso 9001:2008 or higher, etdc / cpri test report &bis certification each / no 1 5 batteries rack capacity of 20 to 25 batteries each / no 1 6 network printer hp jet 4240n network ready laser printer printing technology laser, inkjet brand hewlett packard connectivity technology usb printer output monochrome print media paper ( plain ) duplex no hardware interface usb 2.0 max printspeed monochrome 40 ppm item weight 60 pounds see less about this item up to 40 ppm letter print speed 1200 dpi resolution 460 mhz processor / 64 mb ram memory up to 512 mb ram via two industry standard 100 pin ddr dimm slots 58.00 lbs ( wxlxh ) 23.60 x 19.70 x 21.30 each / no 1 7 networking for 20 nodes cat6 utp cable ( box of 305 mtrs ) , 24 port ethernet networking switch – sr224 cisco, i / o with smb, jack panel – 24 ports cat6 patch cable ( 3 mts ) , rj 45 connectors, 1” flexible pipe per runnining mtr, 2” flexible pipe per running mts, networking rack each / no 1 8 air conditioners for labs blue star 2.0 ton 5 star inverter split ac ( copper, dust filter, 2022 model, ia524dlu, white ) each / no 1 9 projector mativeresolution:xga 1024 x 768 brightness:3700 lumes lamp life: upto 10, 000hrs contrast ratio:16, 000:1 video compataibility:ntsc, pal hdmi:720p, 576p, 576i, 480p, 480i, 1080i, 1080p audio:audio out connector support with 16w audio output zoom focus:manual display input:vgax2 , hdmi x 2 , usb, composit av , mhl, wifi aspect ratio:4:3 and 16:9 remote :full function connectivity hdmi / vga, mhl, wifi each / no 1 10 analog and digital electronics lab / microcontroller lab arm / 7tdmi / lpc2148 kit including all interface and accessoreies each / no 1 11 patch cords each / no 1 12 cro probes each / no 1 13 pcb spring board each / no 1 14 ics: 555 ua741, 7400, 7402, 7404, 74138, 74151 7490, 7495, 7486, 7410, 7420, 7408, 7432, 7410, 7490, 7476 each / no 1 15 resistors: 100k, 10 k, 1k, 270 ω, 22k, 4.7 k, 15k, 7 k, 5k, 33 k, 6.8 k, 3.3 k, 2.2 k, 90 k, 470 ω, 8.2 k, 47 k, 1.8 k, 10 k , potentiometer 90k, 20k each / no 1 16 capacitor:1 uf, 0.47 uf, 0.01 uf, 0.1 uf, dc supply: +5 volts 1a, ±12 volts 500 ma socket: 5 nos 16 / 20 pin zif socket bread board: 1 nos 680 tie points logic i / p: 16 nos toggle switches for inputs logic o / p: 16 nos high bright leds for outputs ttl clock: 1hz, 10hz, 100hz, 1 khz, 10 khz display: 2 nos 7segment display mono pulse: 1 hi & 1 low pulse terminals: 4mm bt 15 terminals each / no 1 17 ups and batteries 10 kva – ups10 kva ups • type: online single phase input & single phase output • capacity : 10kva • backup time: 4 hours or higher • input frequency: 50hz.+ / 5% • input voltage : 160v 270v • output voltage:230v+ / 1%v • output frequency : 50hz+ / 0.2hz. • input power factor: >0.9 • output power factor: 0.8 lag to unity • pf waveform: pure sine wave • alarm: on battery, low battery, ups over load • no. of batteries: compatible • dc voltage ( input ) :compatible • overload capacity : 150% for 1minute , 125% for 10minutes • inverter efficiency : 90% • overall efficiency: 90% • crest factor: 3:01 • regulation: + / 1% • switching frequency : above 20khz • technology: igbt based pwm technology with isolation transformer • warranty : 3 years onsite comprehensive including batteries • protection: automatic discharge protection with self test features, overload surge protection , input fault, cold start, low battery , battery over charge, output short circuit, charging current circuit, inverter over temperature • lcd display : output voltage, output current, load%, output frequency, input voltage, battery voltage • load test: at 100% load on resistive load thd: <3% for linear, <5% for non linear • certification: iso 9001:2008 or higher, etdc / cpri test report &bis certification each / no 1 18 150 kvh batteries exide make 12v 150 / 200 ah smf batteries each / no 1 19 computer lab projector mativeresolution:xga 1024 x 768 brightness:3700 lumes lamp life: upto 10, 000hrs contrast ratio:16, 000:1 video compataibility:ntsc, pal hdmi:720p, 576p, 576i, 480p, 480i, 1080i, 1080p audio:audio out connector support with 16w audio output zoom focus:manual display input:vgax2 , hdmi x 2 , usb, composit av , mhl, wifi aspect ratio:4:3 and 16:9 remote :full function connectivity hdmi / vga, mhl, wifi each / no 1 20 staff hp laserjet configuration black and white, print, copy, scan , 1 hi speed usb 2.0 , laser, a4 black and white laser, multifunction printer, perfect for enterprise, print, copy and scan, print speed up to 21 ppm ( black ) preinstalled introductory hp laserjet black cartridge ( ~700 pages ) installation guide, getting started guide, users guide, support flyer, warranty guide printer software and documentation on cd power cord , usb cable each / no 1 21 department and staff laptop omputers:7thgeneration corei5 / i7, 8gb ram, 1tb hdd, 2gb graphics, 23.8 fhd windows 10 all in one desktop pc with wi fi enabled each / no 1 22 c programming laboratory computers ( wi fi enabled ) computers:7thgeneration corei5 / i7, 8gb ram, 1tb hdd, 2gb graphics, 23.8 fhd windows 10 all in one desktop pc with wi fi enabled each / no 1 23 computer network laboratory / mobile application developmen / artificial intelligence and machine learning laboratory server computer higher end specifications each / no 1 24 hp laserjet configuration black and white, print, copy, scan , 1 hi speed usb 2.0 , laser, a4 black and white laser, multifunction printer, perfect for enterprise, print, copy and scan, print speed up to 21 ppm ( black ) preinstalled introductory hp laserjet black cartridge ( ~700 pages ) installation guide, getting started guide, users guide, support flyer, warranty guide printer software and documentation on cd power cord , usb cable each / no 1 25 ups and batteries 10 kva – ups10 kva ups • type: online single phase input & single phase output • capacity : 10kva • backup time: 4 hours or higher • input frequency: 50hz.+ / 5% • input voltage : 160v 270v • output voltage:230v+ / 1%v • output frequency : 50hz+ / 0.2hz. • input power factor: >0.9 • output power factor: 0.8 lag to unity • pf waveform: pure sine wave • alarm: on battery, low battery, ups over load • no. of batteries: compatible • dc voltage ( input ) :compatible • overload capacity : 150% for 1minute , 125% for 10minutes • inverter efficiency : 90% • overall efficiency: 90% • crest factor: 3:01 • regulation: + / 1% • switching frequency : above 20khz • technology: igbt based pwm technology with isolation transformer • warranty : 3 years onsite comprehensive including batteries • protection: automatic discharge protection with self test features, overload surge protection , input fault, cold start, low battery , battery over charge, output short circuit, charging current circuit, inverter over temperature • lcd display : output voltage, output current, load%, output frequency, input voltage, battery voltage • load test: at 100% load on resistive load thd: <3% for linear, <5% for non linear • certification: iso 9001:2008 or higher, etdc / cpri test report &bis certification each / no 1 26 batteries rack 25 batteries each / no 1 27 network printer hp jet 4240n network ready laser printer printing technology laser, inkjet brand hewlett packard connectivity technology usb printer output monochrome print media paper ( plain ) duplex no hardware interface usb 2.0 max printspeed monochrome 40 ppm item weight 60 pounds see less about this item up to 40 ppm letter print speed 1200 dpi resolution 460 mhz processor / 64 mb ram memory up to 512 mb ram via two industry standard 100 pin ddr dimm slots 58.00 lbs ( wxlxh ) 23.60 x 19.70 x 21.30 each / no 1 28 networking for 20 nodes cat6 utp cable ( box of 305 mtrs ) , 24 port ethernet networking switch – sr224 cisco, i / o with smb, jack panel – 24 ports cat6 patch cable ( 3 mts ) , rj 45 connectors, 1” flexible pipe per runnining mtr, 2” flexible pipe per running mts, networking rack each / no 1 29 air conditioners for labs blue star 2.0 ton 5 star inverter split ac ( copper, dust filter, 2022 model, ia524dlu, white ) each / no 1 30 projector mativeresolution:xga 1024 x 768 brightness:3700 lumes lamp life: upto 10, 000hrs contrast ratio:16, 000:1 video compataibility:ntsc, pal hdmi:720p, 576p, 576i, 480p, 480i, 1080i, 1080p audio:audio out connector support with 16w audio output zoom focus:manual display input:vgax2 , hdmi x 2 , usb, composit av , mhl, wifi aspect ratio:4:3 and 16:9 remote :full function connectivity hdmi / vga, mhl, wifi each / no 1 3 e&c engineering department 1 regulated power supply 1. ar ps 302s dc regulated power supply with short circuit & overload protection 0 30 / 2a single out put with two digital meters. 2. ar ps 302d dc regulated power supply with short circuit & over load protection 0 30v / 2a dual output with two digital meters 2 bread board bread board with terminals mounted on plate 3 spring board spring board with two 16 pin zif socketand 64 spcar springs. 4 decade boxes plastic switches 1. decade resistance box with 6 dials ( 1 ohms to 1 m ohms ) 2. decade capacitance box with 6 dials ( 10pfd to 100pfd, 100pfd to 0.001ufd, 0.001ufd to 0.01ufd to 0.1ufd, .1ufd to 1ufd, 1ufd to 10ufd ) 3. decade inductance box with 6 dials ( 10uh to 100uh, 100uh to 1mh, 1mh to 10mh, 10mh to100mh, 100h to 1h, 1h to 10h ) 5 lcr meters handheld lcr meter 6 signal enerator generator phy 103far 0.2hz to 2mhz microcontroller based signal generator with lcd display for frequency & amplitude read out int / ext ( ext upto 3mhz counter ) sine / square / triangle and puse with variable duty cycle amplitude 2mv 20vpp with 40db attenuation. 7 digital storage oscilloscope 100 mhz dso model :gds 1102 u ( 1 gs / s, 2 mega points mem 8 desk top digital meters 1. ac voltmeter single range 2. dc voltmeter single range 3. ac ammeter single range 4. dc ammeter single range 9 analog oscilloscope scientific 30mhz dual trace oscilloscope 10 scr kit a ) variable dc power supply 3v to 30v @ 500ma to vary vak b ) variable dc power supply 1.5v to 15v @ 100ma to vary ig c ) 10watts fixed resistor rg for gate current d ) 50watts variable resistance for load current variation e ) 2 scr’s of different ratings to find different holding and latching current f ) digital dc milliammeter for gate current ig g ) digital dc ammeter for load current il. h ) digital dc voltmeter for vak i ) 230v ac mains operated j ) unit enclosed in a powder coated ms box with screen printed polycarbonate panel 11 scr controlled hwr and fwr using rc triggering circuit kit a ) 20v @ 0.5a ac supply b ) 10a / 600v scr with heat sink and snubber circuit c ) potentiometer, fixed resistor, capacitor and associated components to build r and r c triggering circuit d ) single phase diode bridge rectifier for full wave controlled rectifier e ) 25 watts resistive load f ) 230v ac mains operated g ) unit enclosed in a powder coated ms box with screen printed polycarbonate panel. 12 measurement of resistance using wheatstone and kelvin’s bridge kit wheatstone bridge: a ) dc power supply – 5v@1a b ) mr 100 sensitive galvanometer c ) the series arm consists of 10x1, 10x10, 10x100, 10x1000 ohms d ) the ratio arm consists of rotary switch of 7 multiplying factors of 0.001, 0.01, 0.1, 1, 10, 100 and 1000. e ) 230v ac mains operated kelvins double bridge: a ) dc power supply 5v@2a b ) mr 100 sensitive galvanometer c ) the double ratio arm consists of rotary switch of 5 multiplying factors of 0.01, 0.1, 1, 10 and 100 d ) 10 coils of 0.1 ohm resistors connected in a rotary switch in series with circular slide wire of 100 divisions to vary r e ) terminals are connect 4 terminal unknown resistor f ) 230v ac mains operated 13 characteristics of ldr & photo diode and turned on an led using ldr a ) variable dc power supply – 1.5v to 12v @ 250ma b ) digital dc voltmeter c ) digital dc milliammeter d ) ldr, photo diode, led, resistors and setup to vary the distance from ldr to lamp to vary light intensity on ldr e ) 230v ac mains operated 1 microcontroller kit 1 bread board bread board with terminals mounted on plate 2 spring board spring board with two 16 pin zif socketand 64 spcar springs. 3 microcontroller based signal generator phy 103far 0.2hz to 2mhz microcontroller based signal generator with lcd display for frequency & amplitude read out int / ext ( ext upto 3mhz counter ) sine / square / triangle and puse with variable duty cycle amplitude 2mv 20vpp with 40db attenuation 4 digital storage oscilloscope 100 mhz dso model :gds 1102 u ( 1 gs / s, 2 mega points mem ) 5 variable power supply ar ps 302d dc regulated power supply with short 6 linear ic tester minmax make microprocessor based analog & digital ic tester for testing analog ics upto 20 pins and digital ics upto 40 pins with 24 keys keyboard and 16 x 2 lcd alphanumeric display. model mme adit 40 7 lcr meters handheld lcr meter 8 decade boxes plastic switches 1.decade resistance box with 6 dials ( 1 ohms to 1 m ohms ) 2. decade capacitance box with 6 dials ( 10pfd to 100pfd, 100pfd to 0.001ufd, 0.001ufd to 0.01ufd to 0.1ufd, .1ufd to 1ufd, 1ufd to 10ufd ) 3. decade inductance box with 6 dials ( 10uh to 100uh, 100uh to 1mh, 1mh to 10mh, 10mh to100mh, 100h to 1h, 1h to 10h ) 9 digital multimeter meco make 10 linear ic trainers 16 pin zif sockets 2 nos. built in function generator 1hz to 100khz sine wave with variable amplitude & square wave. built in power supply ( +5v 1a, + / 15v 200ma, 0 to + / 15v 350ma, 24v, 200ma ) with metal box enclosure. variable input source 0 to + / 12v, 0 to + / 1.2v. 4mm sockets with patch cords. bread board ( 165 x 50mm ) 1no. potentiometers 3 nos. a / c source 6 0 6 regulators 7805, 7905, lm317 extra 20 terminals. 20 patch chords each / no 1 7 dsp lab 1 dsp starter kit tms320c6748 with emulator hardware the omap l138 c6000 dsp+arm processor is a low power applications processor based on an arm926ej s and a c674x dsp core. 456 mhz c6748 fixed / floating point dsp, on chip rtc, one mini usb serial port ( on board serial to usb ) , one fast ethernet port ( 10 / 100 mbps ) with status, leds, one usb host port ( usb 1.1 ) , one mini usb otg port ( usb 2.0 ) , one lcd port, two audio ports ( 1 line in & 1 line out ) , 14 pin jtag header, on board 128mb sdram and 128mb nand. software a complete integrated development environment ( ide ) , an efficient optimizing c / c++ compiler assembler, linker, debugger, an a advanced editor with code maestro™ technology for faster code creation, data visualization, a profiler and a flexible project manager dsp / bios™ real time kernel target error recovery software dsk diagnostic tool plug in ability for third party software for additional functionality. each / no 1 8 hdl lab 1 sda fpga 04 trainer sda fpga 04 trainer 32 inputs using 8 way four dip switches. each input of these switches has an led indication. 32 outputs through output ports of fpga connected to leds. 16x2 alpha–numeric lcd display with back light through 10 pin frc connectors to fpga / cpld port pins. six digit 7 segment displays connected through 10 pin frc connector to fpga / cpld port pin. 4x4 key matrix. 10 mhz, 5 mhz, 1mhz, 500 khz, 100 khz five different clock frequencies. on board relay connected using 10 pin frc to fpga / cpld port pins. on board traffic light simulator connected to fpga / cpld port pins using 16 pin frc. on board adc connected to fpga / cpld port pins using 16 pin frc. on board dac is provided to generate different waveforms and it is connected to fpga / cpld port pins using 16 pin frc. on board four level elevator connected to fpga / cpld port pins using 16 pin frc. two pin reliamate is provided on the board to connect external dc motor and it is connected to fpga / cpld port pins using 10 pin frc. 5 way powermate is provided to connect external stepper each / no 1 motor and it is connected to fpga / cpld port pins using 10 pin frc. 26 pin frc header with cable for connecting to als standard interfaces. 8 inputs using 0ne dip switches. each input of these switches has an led indication. one push button four sets of 20x2 female berg connector to plug the daughter board. programs can be downloaded from the pc to the fpga / cpld on the daughter board using programming tool. 2 daughter board 6 xlinix xc6slx4tq144: spartan6 fpga platform flash in system programmable configuration prom: xcf04svo20 16 pin frc connector to select between base board toggle switch and the 26 pin frc external interface. jtag connector ( 10 pin frc connector ) for boundary scan programming. push button switch to re initialize the fpga and done led for program status indication power from the bottom board. four sets of 20 x 2 berg connectors for plugging on to the base board. each / no 1 3 bit pattern logic analyzer cpld 32 bit pattern generator and logic analyzer 4 power supply power supply ( 5v, 1.5a, + / 12v, 100ma ) 1 arm cortex m3 1768 evaluation board 1 frequency modulation and demodulation trainer kit 2 amplitude modulation and demodulation trainer kit 3 analog sampling and reconstruction trainer kit 4 time division multiplexing and demultiplexing trainer kit ( tdm ) with power supply 5 psk / dpsk modulation and demodulation kit with power supply 6 ask / fsk modulation and demodulation kit with power supply  data bits: variable data using sliding switch  carrier :onboard variable frequency and amplitude sine wave  bask modulator: using cd4066 ( bilateral switch  ask demodulator: using ic tl084 with low pass filter  we can see outputs in various test points  bfsk modulator: variable carrier frequency modulation  bfsk demodulator: using pll method for demodulation also we can see outputs in various test points 7 measurement of frequency, guide wavelength, power , vswr and attenuation in microwave test bench klystron power supply  klystron mount with klystron tube  variable attenuator  frequency meter  slotted section  tunable probe  detector mount  isolator  waveguide stand ( 02 nos. )  bnc bnc cables ( 02 nos. )  cooling fan 8 obtain the radiation pattern and measurement of directivity and fain of micro strip dipole and yagi antenna ( 1set )  yagi antenna  dipole antenna  antenna tripod stands ( transmitter and receiver )  microwave detector ( dc 3ghz )  signal generator 2.0 – 3.0ghz  vswr meter  coaxial matched loads – 50 ohms 03 nos.  short  adapter n ( m ) to sma ( f )  adapter sma ( f ) to sma ( f )  adapter sma ( m ) to sma ( m )  rf cable 1m length bnc cable 9 determination of a ) coupling and isolation characteristics of microstrip directional coupler b ) resonance characteristics of microstrip ring resonator and computation of dielectric constant of the substrate c ) power division and isolation of microstrip power divider ( 1set )  ring resonator  power divider  branch line directional coupler  parallel coupled directional coupler  stripline directional coupler  microwave detector ( dc 3ghz )  signal generator 2.0 – 3.0ghz  vswr meter  coaxial matched loads – 50 ohms 03 nos.  short  attenuator pad 3db  attenuator pad 6db  attenuator pad 10db coaxial  adapter n ( m ) to sma ( f ) 02 nos.  adapter sma ( f ) to sma ( f ) 02 nos  adapter sma ( m ) to sma ( m )  bnc cable 10 matlab / labview software simulation experiments : nrz, rz, and generation of eye diagram for binary polar signaling. pcm and modulation and demodulation digital modulation schemes 1. dpsk transmitter and receiver 2. qpsk ( 10 users license ) 1 cadence / synopsis / mentor graohics / microwind software eda tools required to carry out verilog programs and layout for vlsi circuits. ( 10 users license ) 1 network simultion software qualnet 10 user license validity: 5 yrs 4 libraries qualnet is a network simulation tool to mimic the behavior of real data communication network like the internet with server pc 1 basic project lab tools & instruments 1. soldering gun 2. de soldering pump 3. antistatic mat for 2” x 3” 4. nose plair 5. cutting plair 6. sleeve remover 7. 3 ¾ digit rishmulti 12s 8. bread board 9. single stand wire ( 10mtr 10. crocodile clip with patch cord 11. solder lead 12.ar ps 302d dc regulated power supply with short circuit & over load protection 0 30v / 2a dual output with two digital meters 13. hand held lcr meter 2 mini projects assembled & tested a ) als stuprj1 smoke alarm b ) als stuprj2 heat alarm c ) als stuprj3 metal detector d ) als stuprj4 touch alarm e ) als stuprj5 electronic harmonium 3 mini projects assembled & tested includes the following f ) als stuprj6 lead acid battery charger g ) als stuprj7 grip tester h ) als stuprj8 light operated relay i ) als stuprj9 light dimmer j ) als stuprj10 water level controller 4 mini projects assembled & tested includes the following k ) als stuprj11 door bell / moisture sensor l ) als stuprj12 beat generator m ) als stuprj13 police siren n ) als stuprj14 linear power supply 5 mini projects assembled & tested includes the following o ) als stuprj15 rf encoder transmitter & decoder receiver 6 adaptor 7 project boards for embedded segment controller boards 1.als pjt89c51ed2 ed2 project with proto board 2.als pjt arm2148 arm project board with proto board 3. als pjt fpga 01 fpga 3s400 project board with proto board 4. als pjtbrd armctxm3 01 arm cortex m3 project board with proto board 5.als pjt proto 01 proto board ( additional ) 8 evaluation boards for study a ) als sda emb eval 03 embedded controller kit b ) power supply ( 5v, 1.5a, + / 12v, 100ma ) 9 mini projects controller based 1. als prj / proto / 01 relay project boardone normally closed contact and one normally open contact channel: 4 channel relay operating voltage: 3.3v to 5v triode drive, increasing relay coil high impedance controller pin pull down circuit for avoidance of malfunction power supply indicator and control indicator lamp power supply and relay instructions, lit, disconnect is off; input signal, signal, common terminal and start conducting; useful for appliance control; dc or ac signal, control, you can control the 220v ac load; there is a normally open and one normally close contact; the module is compliant with international safety standards, control and load areas isolation trenches. 10 accessories for controller based projects 1.als pjtbrd / acc / 01 4 channel relay board each / no 1 2.als pjtbrd / acc / 02 4 x 7 segment display board each / no 1 3.als pjtbrd / acc / 03 4 x 4 keypad board each / no 1 4.als pjtbrd / acc / 04 6 keypad board each / no 1 5.als pjtbrd / acc / 05 2 x 16 lcd board each / no 1 6. als pjtbrd / acc / 06 8 led board each / no 1 11 technology study modules 1. als prjbrd ucxp1—01a finger print based door lock each / no 1 2.als prjbrd ucxp2 01a gps location indicator each / no 1 3. als prjbrd ucxp3 01a gsm based home security gsm module each / no 1 4.als prjbrd ucxp4 01 graphic lcd with sensors each / no 1 5.als prjbrd ucxp5 01 zigbee based wireless data acquision system ( min 2nos required for experiment ) each / no 1 6.als prjbrd ucxp6 01 rfid based access control each / no 1 7.als prjbrd ucxp7 01 bluetooth based servo motor each / no 1 12 evaluation board of vhdl kit a ) als sda cpld / fpga 02 universal base board with fpga 3s400 each / no 1 b ) power supply ( 5v, 1.5a, + / 12v, 100ma ) each / no 1 interfaces for the above a ) als nifc 01a stepper motor interface each / no 1 b ) als nifc 05a logic controller interface each / no 1 c ) als nifc 27 adc / dac interface each / no 1 d ) als nifc 17 elevator interface each / no 1 e ) als nifc 11 traffic light interface each / no 1 f ) als nifc 58 temperature and relay interface each / no 1 arm 2148 trainer kit als sda arm7 06 arm7 evaluation board each / no 1 optional : power supply ( 5v, 1.5a, + / 12v, 100ma ) each / no 1 to serial converter each / no 1 als sda arm7 07 arm7 2148 evaluation board optional : each / no 1 power supply ( 5v, 1.5a, + / 12v, 100ma ) each / no 1 usb to serial converter each / no 1 als sda armctxm3 01 arm cortex m3 evaluation board each / no 1 power supply ( 5v, 1.5a, + / 12v, 100ma ) each / no 1 usb to serial converter each / no 1 als sda armctxm3 06 arm cortex m3 1768 evaluation board each / no 1 power supply ( 5v, 1.5a, + / 12v, 100ma ) each / no 1 usb to serial converter each / no 1 13 external interfaces for arm board 1.als nifc 71 rfid interface each / no 1 2. als nifc 72 gsm interface each / no 1 3.als nifc 73 zigbee interface each / no 1 4.als nifc 74 gps co ordinator each / no 1 5.als nifc 75 bluetooth interface each / no 1 6.als nifc 76 graphic lcd interface each / no 1 7.als nifc 77 keypad and dtmf tone generator each / no 1 14 basic electrical engineering lab 1 verification of kvl and kcl for dc circuits this set consists a ) regulated dc power supply – 30v @ 2a b ) edm type analog dc voltmeters – 30v 3 nos. c ) edm type analog dc ammeters – 2a 3 nos. d ) rheostats – i ) 50 ohms / 2a ii ) 100 ohms / 2 a iii ) 150 ohms / 2 a each / no 1 2 measurement of current, power and power factor of incandescent lamp, fluorescent lamp and led lamp: and two way and three way control of lamp and formation of truth table this set consists of : screen printed polycarbonate panel board enclosed in powder coated ms frame consists of mcb, indicator, fuse, single phase digital multifunction meter with ct for direct measurement, 1 no. incandescent lamp, 1 no. fluorescent lamp and 1 no. led lamp. 2 nos of 2 way switches and 1 no. of intermediate switch with terminals for inter connection each / no 1 3 measurement of resistance and inductance of a choke coil using 3 voltmeter method this set consists of : a ) screen printed polycarbonate panel board enclosed in powder coated ms frame consists of mcb, indicator, fuse, 3 nos of digital voltmeters, 1 no. of digital ammeter, single phase auto transformer – 0 270v @ 2a. and 2a choke coil. variable dc supply of 0 200v dc @ 2a for dc motor armature supply and 220v + / 10 % @ 0.5a for field supply to study dc motor control. variable ac current supply of 0 20a ac for testing fuse and mcb. b ) rheostat – 470 ohms / 1.2a each / no 1 4 determination of phase and line quantities in three phase star / delta connected loads: this set consists of : a ) screen printed polycarbonate panel board enclosed in powder coated ms frame consists of mcb, indicator, fuse, 2 nos of ac voltmeters, 2 nos of ac ammeters. b ) three phase auto transformer 0 470v @ 6a mounted on trolley and terminals are brought out on the panel. three phase resistive load – 5 a ( per phase ) / 5 steps suitable for star and delta connection. each / no 1 5 measurement of three phase power using two wattmeter method: this set consists of : a ) screen printed polycarbonate panel board enclosed in powder coated ms frame consists of mcb, indicator, fuse, 1 no of ac voltmeter, 1 no. of ac ammeter and 2 nos of upf wattmeters. b ) three phase auto transformer 0 470v @ 6a mounted on trolley and terminals are brought out on the panel. c ) three phase resistive load – 5 a / 5 steps suitable for star and delta connection. each / no 1 6 measurement of earth resistance: digital earth resistance tester – 10 / 1000 ohms – waco make with testing kit. each / no 1 7 study of effect of open and short circuit in simple circuit: this set consists of: screen printed polycarbonate panel consists of mcb, indicator, fuse, single phase transformer – 500va, primary: 230v, secondary:115v and 2v @ 20a transformer tapping . single phase auto transformer – 2 a, digital ac voltmeter, digital ac ammeter to study open circuit voltage of transformer and short circuit current at low voltage. each / no 1 8 demonstration of cut out sections of electrical machines ( dc machines, induction machines and synchronous machines ) : this set consists of : a ) working cut section of dc shunt motor – 0.5 hp / 220v b ) working cut section of 2 and 4 pole 3 phase induction motor – 0.5 hp / 415v c ) cut section of 3 phase synchronous motor – 1 hp / 415v d ) tester, test lamp and silicon tester ( non contact type ) e ) ups demo kit – open type to observe different parts of ups – 500va each / no 1 15 computer aided building planning & drawing lab 1 desktops: computer configuration a ) processor intel i7 dual core b ) ram 8gb / 6gb c ) hard disk d ) mother board – intel chipset e ) graphics card – 1gb dedicated n vidia graphics card f ) lan g ) monitor 17” led / tft h ) keyboard i ball i ) mouse – i ball each / no 1 2 printers with scanner: the xerox machine comes with a3 black and white mfp with a brisk output speed of 20 ppm, providing maximum efficiency for document processing in your office. dis reliable mfp has been designed to provide you with robust performance in demanding office environments. the comes with an energy saving key, putting it instantly into sleep mode, reducing youre energy bill. • id card scan function copies both sides on to a single sheet, saving you time • two short cut keys can be customized to perform frequently performed tasks quickly general specification: continuous output speed:20 pages per minute memory standard: 256 mb power source:220 240 v, 50 / 60 hz options 1 x 500 sheet paper tray ( maximum 2 units ) , network controller ( ddst unit ) , and bypass tray cover. paper handling: recommended paper size: standard paper tray ( s ) : a3, a4, a5 by pass tray:a3, a4, a5, a6 paper input capacity standard: 350 sheets maximum: 1, 350 sheets bypass tray: 52 216 g / m² duplex: 64 105 g / m² copier:copyingprocess:laser beam scanning & electro photographic printing multiple copying: up to 99 copies resolution: up to 600 dpi zoom from 50% to 200% scanner: scan speed colour: maximum 6 originals per minute b / w:maximum 15 originals per minute interface standard: usb 2.0 option: ethernet 10 base t / 100 power consumption:lesstempthan 950 w ready mode:92 w sleep mode:2.7 w tec ( typical electricity consumption ) :1, 480 w / h each / no 1 3 hp laserjet configuration black and white, print, copy, scan , 1 hi speed usb 2.0 , laser, a4 black and white laser, multifunction printer, perfect for enterprise, print, copy and scan, print speed up to 21 ppm ( black ) preinstalled introductory hp laserjet black cartridge ( ~700 pages ) installation guide, getting started guide, users guide, support flyer, warranty guide printer software and documentation on cd power cord , usb cable each / no 1 4 autocadd 2022 ( 30 users license software ) each / no 1 5 projector mativeresolution:xga 1024 x 768 brightness:3700 lumes lamp life: upto 10, 000hrs contrast ratio:16, 000:1 video compataibility:ntsc, pal hdmi:720p, 576p, 576i, 480p, 480i, 1080i, 1080p audio:audio out connector support with 16w audio output zoom focus:manual display input:vgax2 , hdmi x 2 , usb, composit av , mhl, wifi aspect ratio:4:3 and 16:9 remote :full function connectivity hdmi / vga, mhl, wifi each / no 1 6 smart board infrared interactive whiteboard interactive whiteboard is an instruction tool that allows computer images to be displayed onto a board using a digital projector. the instructor can then manipulate the elements on the board by using his finger as a mouse directly on the screen. items can be dragged, clicked and copied and the lecturer can handwrite notes, which can be transformed into text and saved. this makes the learning interactive and collaborative. specifications as per the make in india model: model:82”m19 size: 82 aspect ratio: 4:3 active area ( mm ) ( wh ) :1680 *1185 overall size ( mm ) ( w*h*d ) :1741*1246*35 packing size ( mm ) : 1890 1395 90 technology: infrared sensor technology calibration: 4 points or 9 points writing method: pen, fingers or any other pointing objects multi touch: 10 touch points communication port: usb 2.0 hotkey:20 hotkeys on each side of board outer frame:82m19 natural aluminum alloy section each / no 1 7 ups and batteries 10 kva – ups10 kva ups • type: online single phase input & single phase output • capacity : 10kva • backup time: 4 hours or higher • input frequency: 50hz.+ / 5% • input voltage : 160v 270v • output voltage:230v+ / 1%v • output frequency : 50hz+ / 0.2hz. • input power factor: >0.9 • output power factor: 0.8 lag to unity • pf waveform: pure sine wave • alarm: on battery, low battery, ups over load • no. of batteries: compatible • dc voltage ( input ) :compatible • overload capacity : 150% for 1minute , 125% for 10minutes • inverter efficiency : 90% • overall efficiency: 90% • crest factor: 3:01 • regulation: + / 1% • switching frequency : above 20khz • technology: igbt based pwm technology with isolation transformer • warranty : 3 years onsite comprehensive including batteries • protection: automatic discharge protection with self test features, overload surge protection , input fault, cold start, low battery , battery over charge, output short circuit, charging current circuit, inverter over temperature • lcd display : output voltage, output current, load%, output frequency, input voltage, battery voltage • load test: at 100% load on resistive load thd: <3% for linear, <5% for non linear • certification: iso 9001:2008 or higher, etdc / cpri test report &bis certification each / no 1 8 lan connection for systems and printers each / no 1 16 building materials testing laboratory 1 universal testing machine with extensometer analogue cum computerized universal testing machine with following specifications a ) measuring capacity : 1000kn analogue system : i range 0 1000kn ( least count 2kn ) ii range 0 500kn ( least count 1kn ) iii range 0 250kn ( least count 0.5kn ) iv range 0 1000kn ( least count 0.2kn ) computerized system: measuring range ( kn ) : 0 to 1000kn ( least count 0.1kn ) with measurement accuracy of ±1% extensometer ( mechanical ) : range – 50mm ( least count 0.1mm ) each / no 1 2 compression testing machine analogue cum computerized compression testing machine with following specifications measuring capacity : 3000kn analogue system : i range 0 1000kn ( least count 2kn ) ii range 0 2000kn ( least count 5kn ) iii range 0 3000kn ( least count 10kn ) computerized system: measuring range ( kn ) : 0 to 3000kn ( least count 2kn ) with measurement accuracy of ±1% each / no 1 3 torsion testing machine capacity 100n mtdisplay type digital model name / number ratnakarrtt60d brand ratnakar maximum clearance between grips 500mm grips for square specimens 5 15mm grips for flat specimens 5 12x40mm type digital feature highly reliable voltage 440v frequency 50hz phase three phase supply type ac maximum capacity 100nm least count 0.01nm each / no 1 4 bending testing machine digital flexure testing machine, capacity 100 kn ( aim 332e dg 1 ) each / no 1 5 shear box direct shear apparatus 6speed motorized with loading unit, housing and mould, perforated and non perforated plates, proving ring 10kn, dial gauge of 0.01 x 25mm and slotted weights each / no 1 6 izod charpy pendulum type impact testing machine capacity 170 ( izod ) / 300 ( charpy ) joules cylinderical cup and tammping rod as per astm / bis specification pendulum drop angle: ( 140 degree for charpy test ) & ( 90 degree for izod test ) pendulam effective wt.: ( 21.400 kg for charpy test ) & ( 21.300 kg for izod test ) pendulum impact energy : 300j ( charpy test ) & 168 j for izod test striking velocity of pendulum: 2.45 m / sec for charpy test & 3.857 m / sec for izod testmin scale graduation: 2j max permissible loss by friction etc.: 0 .50% of impact energy the pendulum impact tester is designed for conducting izod, charpy test. each / no 1 7 brinell hardness tester capacity 120 kgf optical magnification:35x, 70x & 140x brinell hardness tester salient features: • automatic zero setting dial gauge • load selection just by dialing externally • capacity throat 150m, max test height – 295 mm • confirm to is: 3804, bs 891, astm: e 18 for rockwell tests and is: 2281, bs: 240, astm: e 10 for brinell tests specification model unit rab 1 loads kgf. 60, 100, 150, 187, 5, 250. initial load kgf. 10 maximum test height mm 295 depth of throat mm 150 maximum depth of elevating screw mm 240 below base size of base ( approximately ) mm 173*425 machine height mm 635 each / no 1 8 rockwell hardness tester capacity 250 kgfrock well hardness tester salient features: • automatic zero setting dial gauge • load selection just by dialing externally • capacity throat 150m, max test height – 295 mm • confirm to is: 3804, bs 891, astm: e 18 for rockwell tests and is: 2281, bs: 240, astm: e 10 for brinell tests specification model unit rab 1 loads kgf. 60, 100, 150, 187, 5, 250. initial load kgf. 10 maximum test height mm 295 depth of throat mm 150 maximum depth of elevating screw mm 240 below base size of base ( approximately ) mm 173*425 machine height mm 635 each / no 1 9 vickers hardness tester capacity 50 kgf optical magnification:35x, 70x & 140xparameter hv display type optical model name / number rvm 50 accuracy high brand ratnakar test loads 5, 10, 20, 30 & 50 kgf ( optional 1kgf, 2.5kgf and 3kgf ) optical magnification 70x scale least count 0.001mm each / no 1 10 tool makers microscope : [ travel x.y axis : 50 x 50 mm, working distance : 67mm, magnification : 30 x ( 15x eyepiece x 2x object lens each / no 1 11 tiles testing machine tiles testing machine material mild steel weight 260kg power 0.25 to 4 kw frequency 50 / 60 hz voltage 220 440 v each / no 1 12 hot air oven alu. chamber, 350x350x350mm, thermostatic ( digital digital hot air oven size: 14 x 14 x 14 with ss inside and ms with powder coating outside 2nos shelves to keep the samples inside imported thermostatically controlled ( + / 2degrees c accuracy ) each / no 1 13 digital weighing balance capacity: 30kg with 5grm accuracyweighing balance 30kg ( 0.1gm least count ) capacity 2 sets as per astm / bis 30kg capacity, 1gma accuracy maximum weight: 30 kg, minimum weight: 10 grams, accuracy: 1 gram large green backlight lcd display: for easy readability can run on aa batteries and also directly from electricity using a adaptor. ( both included ) multiple units of measurement: kg, g, lbs, ct , tola. tare function to subtract the weight of objects, and also piece counting function to be used with small objects each / no 1 14 fine aggregate sieve set standard is sieve set brass sieves 200mm dia set of 7 4.75, 2.36, 1.18mm, 600, 300, 150mic, l&p each / no 1 15 metal tray 12x12 each / no 1 16 sieve shaker motorized, with timer 0 60mins, 0.25 hp moto relectrical sieve shaker with 12 adaptor sieve shaker is the only sieve shaker specifically designed for portable use without ac power supply. hand operated shakers from other sources are merely adapted from motor driven units without regard for discomforts of hand cranking or other needs of the field operator. cranking effort is minimized through the use of quality flange bearings at both shaft ends, and counterbalanced mechanism. the special removable crank is provided. approximately one turn per sec. gives desired sieving action. lightweight at only 43 lb ( 19.5kg ) , the unit also has recessed handles on sides for carrying. no special mounting hardware is required. four oversized pliable rubber feet improve machine grip to work surface. the unit holds 8 full height 8 ( 203mm ) sieves and pan with sturdy painted steel case, and has 3 way sieving action and cover clamping features. each / no 1 17 coarse aggregate sieve set standard is sieve set gi sieves 300mm dia set of 7 40, 20, 10, 16, 12.5, 4.75mm, l&p each / no 1 18 density basket as per is:2386 ( part iii ) , made of gi wire mesh shape : cylindrical basket, size : 20x20 cm each / no 1 19 specific gravity bottles 100ml each / no 1 20 loading frame 100 tonnes capacity each / no 1 21 digital slide calipers type of product: digimatic vernier calipermeasuring range ( mm ) : 0 150 mmresolution ( mm ) : 0.01 mmmeasuring range ( inch ) : 0 6 inchresolution ( inch ) : 0.005 inchmaterial: stainless steelpower supply: button type silver oxide battery sr44includes: product catalog , plastic casedisplay: lcdaccuracy: ±0.001 inch each / no 1 22 digital screw gauge type of product: digimatic micrometerrange ( mm ) : 0 25 mmresolution ( mm ) : 0.001 mmweight: 0.275 kgpower supply: battery sr 44includes: including box, key, 1 battery, setting standard certificate of inspectionmaterial: stainless steellength ( mm ) : 157 mmaccuracy: ±2μmbreadth ( mm ) : 58 mm each / no 1 23 punch size 100 mm brand colour blue material chromium vanadium steel package contents 1 pc center punch 100 mm 4 inch insulated no item weight 150 g type center pun each / no 1 24 steel scale the set include 1 piece 12 inch ( 300 mm ) ruler and 1 piece 6 inch ( 150mm ) ruler each / no 1 25 steel tamping rod of 10mm diameter each / no 1 26 1000ml glass container each / no 1 27 tamping rod of 16mm diameter each / no 1 28 tool makers microscope : [ travel x.y axis : 50 x 50 mm, working distance : 67mm, magnification : 30 x ( 15x eyepiece x 2x object lens ) ] each / no 1 29 demec gauge 200mm 200mm dial 1 div = 8 x 10 to power of minus 6 2.6kg 300 x 200 x 110mm each / no 1 30 dial gauge 200mm item weight ‎0.28 g product dimensions ‎11.99 x 10.01 x 5 cm; 0.28 grams item model number ‎7212 item height ‎1.97 inches item width ‎3.94 inches each / no 1 31 digital strain gauges each / no 1 32 digital strain indicators type si 100 range 2000.0 micro strain gauge resistance 350 ohms bridge quarter, half & full non linearity ± 0. 05% of full scale tare digital tare sensitivity can be calibrated by key pad power 230v bridge excitation 10 v dc gauge factor setting 1.00 to 10.00 bridge factor can be entered through keypad type of bridge can be entered through keypad each / no 1 33 projector mativeresolution:xga 1024 x 768 brightness:3700 lumes lamp life: upto 10, 000hrs contrast ratio:16, 000:1 video compataibility:ntsc, pal hdmi:720p, 576p, 576i, 480p, 480i, 1080i, 1080p audio:audio out connector support with 16w audio output zoom focus:manual display input:vgax2 , hdmi x 2 , usb, composit av , mhl, wifi aspect ratio:4:3 and 16:9 remote :full function connectivity hdmi / vga, mhl, wifi each / no 1 34 smart board infrared interactive whiteboard interactive whiteboard is an instruction tool that allows computer images to be displayed onto a board using a digital projector. the instructor can then manipulate the elements on the board by using his finger as a mouse directly on the screen. items can be dragged, clicked and copied and the lecturer can handwrite notes, which can be transformed into text and saved. this makes the learning interactive and collaborative. specifications as per the make in india model: model:82”m19 size: 82 aspect ratio: 4:3 active area ( mm ) ( wh ) :1680 *1185 overall size ( mm ) ( w*h*d ) :1741*1246*35 packing size ( mm ) : 1890 1395 90 technology: infrared sensor technology calibration: 4 points or 9 points writing method: pen, fingers or any other pointing objects multi touch: 10 touch points communication port: usb 2.0 hotkey:20 hotkeys on each side of board outer frame:82m19 natural aluminum alloy section each / no 1 35 printers with scanner: the xerox machine comes with a3 black and white mfp with a brisk output speed of 20 ppm, providing maximum efficiency for document processing in your office. dis reliable mfp has been designed to provide you with robust performance in demanding office environments. the comes with an energy saving key, putting it instantly into sleep mode, reducing youre energy bill. • id card scan function copies both sides on to a single sheet, saving you time • two short cut keys can be customized to perform frequently performed tasks quickly general specification: continuous output speed:20 pages per minute memory standard: 256 mb power source:220 240 v, 50 / 60 hz options 1 x 500 sheet paper tray ( maximum 2 units ) , network controller ( ddst unit ) , and bypass tray cover. paper handling: recommended paper size: standard paper tray ( s ) : a3, a4, a5 by pass tray:a3, a4, a5, a6 paper input capacity standard: 350 sheets maximum: 1, 350 sheets bypass tray: 52 216 g / m² duplex: 64 105 g / m² copier:copyingprocess:laser beam scanning & electro photographic printing multiple copying: up to 99 copies resolution: up to 600 dpi zoom from 50% to 200% scanner: scan speed colour: maximum 6 originals per minute b / w:maximum 15 originals per minute interface standard: usb 2.0 option: ethernet 10 base t / 100 power consumption:lesstempthan 950 w ready mode:92 w sleep mode:2.7 w tec ( typical electricity consumption ) :1, 480 w / h each / no 1 36 hp laserjet configuration black and white, print, copy, scan , 1 hi speed usb 2.0 , laser, a4 black and white laser, multifunction printer, perfect for enterprise, print, copy and scan, print speed up to 21 ppm ( black ) preinstalled introductory hp laserjet black cartridge ( ~700 pages ) installation guide, getting started guide, users guide, support flyer, warranty guide printer software and documentation on cd power cord , usb cable each / no 1 17 engineering geology laboratory 1 streak plates each / no 1 2 knifes each / no 1 3 convex lens ( small for mineral grain size identification ) each / no 1 4 folds, faults dyke, sill, volcano, unconformity models painting on wood. each / no 1 5 250 ml measuring jar / bottles for acidic test of minerals and glass rods. each / no 1 6 projector mativeresolution:xga 1024 x 768 brightness:3700 lumes lamp life: upto 10, 000hrs contrast ratio:16, 000:1 video compataibility:ntsc, pal hdmi:720p, 576p, 576i, 480p, 480i, 1080i, 1080p audio:audio out connector support with 16w audio output zoom focus:manual display input:vgax2 , hdmi x 2 , usb, composit av , mhl, wifi aspect ratio:4:3 and 16:9 remote :full function connectivity hdmi / vga, mhl, wifi each / no 1 7 smart board infrared interactive whiteboard interactive whiteboard is an instruction tool that allows computer images to be displayed onto a board using a digital projector. the instructor can then manipulate the elements on the board by using his finger as a mouse directly on the screen. items can be dragged, clicked and copied and the lecturer can handwrite notes, which can be transformed into text and saved. this makes the learning interactive and collaborative. specifications as per the make in india model: model:82”m19 size: 82 aspect ratio: 4:3 active area ( mm ) ( wh ) :1680 *1185 overall size ( mm ) ( w*h*d ) :1741*1246*35 packing size ( mm ) : 1890 1395 90 technology: infrared sensor technology calibration: 4 points or 9 points writing method: pen, fingers or any other pointing objects multi touch: 10 touch points communication port: usb 2.0 hotkey:20 hotkeys on each side of board outer frame:82m19 natural aluminum alloy section each / no 1 18 surveying practice 1 total stationsokkia total station, model im 105, 5seconds accuracy 500mtrs reflectorless function, 36hours single battery back up, latest state of the art edm, usb downloading facility, original japan make, double side display, comes with a charger in a plastic case each / no 1 2 auto level, accuracy ( per double km run ) : ±1.0mm magnification:32x telescope:erect objective aperture:40mm focusing distance:from 0.5m multiplication factor:100 additive factor:0 waterproof:yes working range:±15′ setting accuracy:±0.3″ bubble sensitivity:8′ / 2mm circle graduation;1 degree weight:1.3kg each / no 1 3 levelling staffmaterial: aluminium leveling staff with canvas cover number of sections 5 | working range is 6 meter powder coated finish – premium quality powder coating finish to ensure long life of the product. clear both side markings – both side clear markings to help you in accurate land surveying. sectional design – 5 sections with push buttons for extending and shortening of the rod. transportation is never an issue now! each / no 1 4 measuring tape 30 meters lengthfoster 30 meter fibre glass measuring tape, unbreakable abs case stands up to the toughest jobsite demands.tape is non conductive, non creasing, water resistance and durable against wear and tear. heat sealed markings on tape ribbon for prolonged life. class iii guaranteed by eectem dimensions lxwxh 17 x 17 x 4 centimeters blade length 30 metres measurement accuracy 1.5 mm each / no 1 5 projector mativeresolution:xga 1024 x 768 brightness:3700 lumes lamp life: upto 10, 000hrs contrast ratio:16, 000:1 video compataibility:ntsc, pal hdmi:720p, 576p, 576i, 480p, 480i, 1080i, 1080p audio:audio out connector support with 16w audio output zoom focus:manual display input:vgax2 , hdmi x 2 , usb, composit av , mhl, wifi aspect ratio:4:3 and 16:9 remote :full function connectivity hdmi / vga, mhl, wifi each / no 1 6 smart board infrared interactive whiteboard interactive whiteboard is an instruction tool that allows computer images to be displayed onto a board using a digital projector. the instructor can then manipulate the elements on the board by using his finger as a mouse directly on the screen. items can be dragged, clicked and copied and the lecturer can handwrite notes, which can be transformed into text and saved. this makes the learning interactive and collaborative. specifications as per the make in india model: model:82”m19 size: 82 aspect ratio: 4:3 active area ( mm ) ( wh ) :1680 *1185 overall size ( mm ) ( w*h*d ) :1741*1246*35 packing size ( mm ) : 1890 1395 90 technology: infrared sensor technology calibration: 4 points or 9 points writing method: pen, fingers or any other pointing objects multi touch: 10 touch points communication port: usb 2.0 hotkey:20 hotkeys on each side of board outer frame:82m19 natural aluminum alloy section each / no 1 19 concrete and highway materials laboratory 1 los angels abrason testing machine as per astm / bis specification consists of a hollow steel cylinder, closed at both ends, having an inside diameter of 700mm and inside length of 500mm. the cylinder mounted on a sturdy frame on ball bearings. the opening is closed dust tight with a removable bolted cover in place. a detachable shelf which extends through the drum catches the abrasive charge and does not allow it to fall on the cover. the drum is rotated at a speed of 30 33 rpm by an electric motor through a heavy duty reduction gear. fitted with revolution counter and push button starter. supplied complete with a tray for collection of the material. abrasive charge consists of set of 12 nos. cast iron spheres or steel spheres ( hardened steel balls ) approximately 48mm diameter each weigh between 390 445 gram. complete as above. each / no 1 2 is sieve 1.7mm as per astm / bis specification iso 565, 3310 1 opening size 1.70mm sieve frame diameter 200mm frame height half height stacked frame height 1 1 / 8in overall frame height 1 5 / 8in material all stainless steel backing cloth included no estimated shipping weight 2.0lb ( 0.91kg ) each / no 1 3 steel frying pan with trowel as per astm / bis specificationstainless steel gas and induction compatible fry pan, 220 mm each / no 1 4 thermometer 110 degree celcius as per astm / bis specificationhandheld, display size: 1.9 inches & under, power type: none, display type: analog, max measuring temperature: 70°c 99°c, model number: glass thermometer, usage: household, theory: glass thermometer, each / no 1 5 thermometer 400 degree celcius as per astm / bis specificationtemperature range 5°—400°c division 1.0°c immersion 3in ( 76mm ) type astm application general use length 16.3 ( 415 ) estimated shipping weight 1.0lb ( 0.45kg ) each / no 1 6 weighing balance 100kg ( 1gm least count ) capacity 2 sets as per astm / bis specification heavy duty digital k12 platform weighing scales are here to fulfill your daily weighing needs with great confidence. * this is built as universal scale for all kinds of trades. like industries and kirana shops, ware houses , lpg delivey points , homes etc. * total weighing capacity is 100 kg. * least count 10 g * platform size of 400x400 mm ( 16 × 16 inch ) is an ideal size for medium to large items. * it is built upon sturdy ms structure with anti corrosion epoxy colour coating. makes it safe from rust and atmospheric wear and tear. * digital weighing indicator is a sealed unit with led red display at 60 degree angle and swivel neck attachment for 360 degree movement and viewing from any angle. * it comes with inbuilt battery backup which is sufficient to provide backup of 50 hours on full charging. * in case battery is fully discharged it can be run upon 220 v ac. * it has inbuilt smart weighing mode if enabled from the menu then it can also be use for human / personal weighing scale at gym , schools or hospitals. * easy calibration system keeps the scale error free. warranty: 6 months carry in manufacturer warranty; warranty: manufacturing defects are covered under warranty. it does not covers batteries or optional items. breakage and damages are not covered under warraty.carry in warranty package contents: 1 weighing scale each / no 1 7 weighing balance 30kg ( 0.1gm least count ) capacity 2 sets as per astm / bis 30kg capacity, 1gma accuracy maximum weight: 30 kg, minimum weight: 10 grams, accuracy: 1 gram large green backlight lcd display: for easy readability can run on aa batteries and also directly from electricity using a adaptor. ( both included ) multiple units of measurement: kg, g, lbs, ct , tola. tare function to subtract the weight of objects, and also piece counting function to be used with small objects each / no 1 8 weighing balance 10kg ( 0.01gm least count ) capacity 2 sets as per astm / bis specification each / no 1 9 weighing balance 500gm ( 0.001gm least count ) capacity 2 sets as per astm / bis specification each / no 1 10 impact testing machine including cylinderical cup and tammping rod as per astm / bis specification pendulum drop angle: ( 140 degree for charpy test ) & ( 90 degree for izod test ) pendulam effective wt.: ( 21.400 kg for charpy test ) & ( 21.300 kg for izod test ) pendulum impact energy : 300j ( charpy test ) & 168 j for izod test striking velocity of pendulum: 2.45 m / sec for charpy test & 3.857 m / sec for izod testmin scale graduation: 2j max permissible loss by friction etc.: 0 .50% of impact energy the pendulum impact tester is designed for conducting izod, charpy test. each / no 1 11 thickness gauge and length gauge as per astm / bis specification material metal item dimensions lxwxh 45 x 20 x 15 centimeters compatible material concrete item weight 2 kilograms each / no 1 12 bitumen specific gravity bottles ( is 1202 2002 ) as per astm / bis specificationspecific gravity bottle with stopper of 50ml capacity, which is available in two patterns: * the ordinary capillary type specific gravity bottle with a neck of6mm diameter. * the wide mouthed capillary type specific gravity bottle with a neck of 25mm diameter. the ordinary specific gravity bottle is used for materials which remain absolutely fluid at 270c while the wide mouth capillary type is used for materials which remain semisolid of high viscous at 270c. each / no 1 13 digital bitumen penetrometer as per astm / bis specificationweight ( approx. ) 24 kg resolution 0.01 mm test time 5 seconds ( adjustable from 0.1 to 9999 sec. ) dimensions 270 x 480 x 750 mm measuring range 0 50 mm test load 100 g ( plunger 97.5 g + 2.5 g penetration needle ) each / no 1 14 apparatus for determination of ductility test as per is 1208 2002 :briquette mould, water bath, putty knife & ductility testing machine as per astm / bis specification tainless steel bath temperature controller ( thermostatic / digital ) immersion electric heater constant speed pump cum stirrer carriage holding up to three standard briquette moulds electric motor with gear mechanism stainless steel scale and pointer control panel accessories : 1. thermometer ip 38 c, range 23ºc to 27ºc. 2. briquette mould with base plate. each / no 1 15 softening point test apparatus ( ring and ball apparatus ) , supporting stand, beaker & thermometer as per astm / bis specification material ms phase 1 phase brand eie power 2800w internal dia 8.5 cm x 12 cm depth ( approx. ) two steel balls each 9.5mm dia each / no 1 16 pensky – martens closed tester for testing flash and fire point as per is: 1209 2002 as per astm / bis specification pensky marten flash point apparatus includes oil test jet device electrical heating with energy regulator fitted with motorised f.h.p. electrical stirrer with stand & digital indicator. this apparatus is made as per ip 34, astmd 93 the apparatus consists of brass test cup with handle removable cup cover with spring operated rotating shutter having piolet jet, stirrer with flexible shaft. the assembly rests in air bath which is covered with dome shape metal top. the cup is fitted with insulated handle and locking arrangement near cup flange. the assembly is kept on round shape electric heater with temperature regulator. suitable for operation on 220 volts 50 cycles ac circuits. each / no 1 17 tar viscometer apparatus ( is: 73:2006 ) heating pan, as per astm / bis specification tar viscometer apparatus as per ip 72 and is 1206 standards. it is used for determination the viscosity of road oils and cut back bitumen. it consists s.s. bath with cup of 10 mm or 4mm orifice and sleeve, stirrer with lifting clip and ball. the assembly kept on suitable stand with leveling screws. suitable to operate on 220 volts ac mains. ar viscometer multiple apparatus consist 2 cups in a s.s. water bath mounted on stand with levelling feet. fitted with 1000 watts heater. temperature is controlled by digital electronic controller with f.h.p. electric motor stirrer. supplied with one tar cup lomm and one 4 mm orifice with valves. tar viscometer multiple apparatus each / no 1 18 marshall compaction apparatus to the requirements of aashto:245 electrical loading unit, compaction pedestal, breaking head assembly, flow meter, load transfer bar, specimen moulds 100 mm diameter with base plat, collars, specimen extractor, compaction hammer 4.53 kg x 457 mm fall and marshall moulds with collars 40 no.s as per astm / bis specification each / no 1 19 semi automatic marshall specimen compactor with hammer weight 4.53kg and 457 mm fall complete sets as per astm / bis specification each / no 1 20 gauging trowel as per astm / bis specificationweight approximately 210 gms hard wood handle blade length 200mm blade material carbon steel trowel, carbon steel handle material wood handle, wood type gauging trowel size 5, 6, 7, 8 each / no 1 21 blaines apparatus ( sets ) conforming to ( is 4031 part 2 ) as per astm / bis specification filter paper manometer liquid, 250 ml test stand u manometer tube rubber aspirator plastic funnel each / no 1 22 auto clave as per astm / bis specification material mild steel power electric operation automatic gas cao, mgo each / no 1 23 le chatliers apparatus ( sets ) as per astm / bis specificationmade from a brass spring tensioned split cylinder having internal diameter of 30 by 30 mm high, with two pointers 150 mm long. chromed finishing. used to determine the cement expansion ( soundness ) eighter in cold and in boiling water. weight: 30 g. each / no 1 24 hot plate as per astm / bis specification material metal colour black item dimensions lxwxh 23.9 x 7.9 x 21.6 centimeters each / no 1 25 cube moulds ( 70.6mm ) as per astm / bis specificationfor maintaining the quality of concrete at the construction sites, clients extensively use our range of cube molds. adhering to the industry guidelines and standards, our professionals only use high quality tested iron to fabricate these molds. clients can avail these molds in various sizes as per their specific requirements. our cube molds are hugely appreciated for features like long service life, precision machined structure and finished interior faces each / no 1 26 mortar cube vibrating machine as per astm / bis specificationusage / application cement testing machine driven type motor power 0 1 kw max weight 0 200 kg automation grade manual phase single brand tei vibrating range 0 1 mm portable each / no 1 27 pulse velocity test apparatus ( ( portable ultrasonic non destructive digital interface ) , two transducer leads, reference bar ) as per astm / bis specification capacity 0 3000 us usage / application to test homogeneity & strength of concrete voltage 250 to 1000 v size 400 x 340 x 110 mm brand matest power 230 v standards en 12504 part 4, astm c597, bs 1881:203, nf p18 418 power source nimh 4.8v rechargeable battery weight 2 kg each / no 1 28 flexure testing machine, as per astm / bis specificationmaterial mild steel automation grade semi automatic brand phr voltage 380v 220v capacity 10ton warranty one year power hydraulic size / dimension 150mm x 150mm x 700mm weight 350kg each / no 1 29 compaction testing equipment with 1000cc moulds, 1.5metre square steel tray, compaction standard proctor hammer 2.85 & 4.89 as per astm / bis specification each / no 1 30 california bearing ratio testing machine with energy level 1, 2 & 3 moulds 15 no.s complete sets and compaction hammer of 4.89kg 2 no.s sets as per astm / bis specification each / no 1 31 is sieves ( 90mm, 75mm, 63mm, 45mm, 37.5mm, 26.5mm, 25mm, 22.4mm, 20mm, 19mm, 16mm, 13mm, 13.2mm, 12.5mm, 11.2mm, 10mm, 9.5mm, 6mm, 6.7mm, 5.6mm, 4.75, 3.35mm, 2.8mm, 2.36mm, 1.18 mm, 710, 600, 425, 300, 180, 150, 75, 90, 53 microns along with lid and pan ( 3sets ) as per astm / bis specification each / no 1 32 90 micron is sieve as per astm / bis specification each / no 1 33 slump cone with tammping rod ( sets ) as per astm / bis specification material cast iron height 30 cm weight 8 kg approx diameter at base 20 cm diameter at top 10 cm each / no 1 34 vee bee consistometer apparatus ( sets ) as per astm / bis specificationthe equipment consists of : a vibrating table size 380 mm long and 260 mm wide, resting upon elastic support at a height of about 305 mm above the floor, complete with start / stop switch, cord and plug. a holder is fixed to the base in to which a swivel arm is telescoped with funnel and guide swivel arm is also detachable from the vibrating table. the divisions of scale on the rod record the slump of the concrete in millimeters. supplied complete with a sheet metal container with lifting handles which can easily be fixed to the vibrating table. a slump cone open at both ends with lifting handles and a tamping rod of size 16 mm dia and 600 mm long rounded at both ends. each / no 1 35 compaction factor appartatus ( sets ) as per astm / bis specificationis 1199, 5515. & bs 1881 103 the apparatus is used for determining the workability of fresh concrete provided the maximum size of the aggregate does not exceed 38mm. the test is particularly useful for concrete mixes of very low workability where true slump values are not reliable. specification: it consists of two rigid conical hoppers and a cylinder mounted on a rigid metal frame. the lower openings of the hoppers are fitted with hinged trapdoors having a quick release catches. a circular metal plate is provided to cover the top of the cylinder. supplied complete with one plasters trowel and one tamping rod, 16 mm dia x 600 mm long, both ends rounded. each / no 1 36 concrete cube moulds ( 150 x 150 x 150 mm ) as per astm / bis specification for maintaining the quality of concrete at the construction sites, clients extensively use our range of cube molds. adhering to the industry guidelines and standards, our professionals only use high quality tested iron to fabricate these molds. clients can avail these molds in various sizes as per their specific requirements. our cube molds are hugely appreciated for features like long service life, precision machined structure and finished interior faces each / no 1 37 cylinders ( 150 mm dia x 300 mm height ) as per astm / bis specification each / no 1 38 beam moulds ( 150 x 150 x 700 mm ) as per astm / bis specification100 x 100 x 700 concrete cube mould that is used for construction industries. the provided mould is manufactured with the help of optimum quality raw material and high grade tools under the supervision of adroit professionals. our offered mould is quality checked on various quality measures by our experts. besides, clients can avail this mould from us at pocket friendly prices. each / no 1 39 concrete permeability apparatus, 3 cell for 150mm cube with compressor ( sets ) as per astm / bis specificationhe concrete permeability apparatus comprises of a brass / gunmetal cell of squares cross section mounted on a stand and a pressure chamber is connected to the cell through copper tubing and t connector mounted on the stand with sleeve packed valve and rubber hose pipe with end connections. the cell assembly consists of one base plate, one metal funnel and one top plate, the pressure chamber is fitted with a pressure regulator which helps in regulating the pressure from 0 15kg / cm sq. gauge is for indicating the pressure in the cell. a foot pump and a pressure tube is supplied to develop pressure in the chamber. the apparatus is supplied with a measuring cylinder 500 cc to measure percolated quantity of water. pressure can also be applied by a pressure air line or by a compressor each / no 1 40 plastic measuring jar 1000 ml capacity as per astm / bis specification each / no 1 41 sieve shaker, digital as per astm / bis specificationeight 20kg power 0.5hp voltage 220v capacity 8kg orbital diameter 110mm display type digital frequency 50hz material mild steel each / no 1 42 flow table apparatus as per astm / bis specificationthe flow table apparatus shall be constructed in accordance with fig. 1a and 1b. flow table top shall be constructed from a flat metal plate of minimum thickness 1.5 mm. the top shall have a plan area of 700 mm × 700 mm and a flatness of within 1.5 mm. the centre of the table shall be scribed with a cross, the lines of which run parallel to and out to the edges of the plate, and with a central circle 200 mm in diameter. the under surface of the plate shall be reinforced in order to prevent distortion of the flat surface. the front of the flow table top shall be provided with a lifting handle. the total mass of the flow table top shall be 16 ± 1 kg. each / no 1 43 leather hand gloves as per astm / bis specification each / no 1 44 fibre drums 200 litre, 100litre capacity as per astm / bis specification each / no 1 45 concrete cube vibration machine as per astm / bis specification each / no 1 46 pan mixer mixing capacity: 40 ltrs overall dimension: 910mm x 875mm x 1250mm motor : 2 hp drum rpm : 24 rpm power supply: 440v frequency: 50hz as per astm / bis specification each / no 1 47 vicat apparatus ( conforming to is: 5513 1996 ) with plunger and needle as per astm / bis specification each / no 1 48 stop watch, funnel, trowel, graduated glass cylinders, mixing tray, platens as per astm / bis specification each / no 1 49 le chatelier flask of 250 ml as per astm / bis specification each / no 1 50 specific gravity bottle for cement / pycnometer of 100 ml as per astm / bis specification each / no 1 51 angularity number metal cylinder, tamping rod, balance, metal scoop as per astm / bis specification each / no 1 52 compression testing machine capacity of load up to 40tonnes as per astm / bis specification each / no 1 53 rebound hammer instrument with abrasive stone as per astm / bis specification each / no 1 54 ( l box test apparatus ( l box, measuring scale ) as per astm / bis specification each / no 1 55 u box test apparatus with measuring scale as per astm / bis specification each / no 1 56 j ring test apparatus with slump cone ( astm c1621 / c1621m 06 ) as per astm / bis specification each / no 1 57 v funnel test apparatus ( v funnel, container ) as per astm / bis specification each / no 1 58 slump flow test apparatus ( astm c 1611 / c 1611m 05 ) with set for self compacting concrete ( abrams cone, baseplate ( 900x900mm ) , rule, weighted collar ) as per astm / bis specification each / no 1 59 steel cylinder with open ends, cylindrical measures, tamping rod for aggregate crushing test as per astm / bis specification each / no 1 60 digital oven 600x600x600mm, 224hr, 2.5kw 3shelves 5 c 250 c power 220 volt each / no 1 20 software application laboratory 1 etabs 2021 stadd pro v 22sap 2021, safe v 19 license software 30 users each / no 1 2 computers – desktops computer configuration a ) processor intel i7 10th gen b ) ram 12gb c ) hard disk 1tb d ) mother board – intel chipset e ) graphics card – 2.5gb dedicated n vidia graphics card f ) lan g ) monitor 17” led h ) keyboard i ball i ) mouse – i ball each / no 1 3 hp laserjet configuration black and white, print, copy, scan , 1 hi speed usb 2.0 , laser, a4 black and white laser, multifunction printer, perfect for enterprise, print, copy and scan, print speed up to 21 ppm ( black ) preinstalled introductory hp laserjet black cartridge ( ~700 pages ) installation guide, getting started guide, users guide, support flyer, warranty guide printer software and documentation on cd power cord , usb cable each / no 1 4 projector mativeresolution:xga 1024 x 768 brightness:3700 lumes lamp life: upto 10, 000hrs contrast ratio:16, 000:1 video compataibility:ntsc, pal hdmi:720p, 576p, 576i, 480p, 480i, 1080i, 1080p audio:audio out connector support with 16w audio output zoom focus:manual display input:vgax2 , hdmi x 2 , usb, composit av , mhl, wifi aspect ratio:4:3 and 16:9 remote :full function connectivity hdmi / vga, mhl, wifi each / no 1 5 smart board infrared interactive whiteboard interactive whiteboard is an instruction tool that allows computer images to be displayed onto a board using a digital projector. the instructor can then manipulate the elements on the board by using his finger as a mouse directly on the screen. items can be dragged, clicked and copied and the lecturer can handwrite notes, which can be transformed into text and saved. this makes the learning interactive and collaborative. specifications as per the make in india model: model:82”m19 size: 82 aspect ratio: 4:3 active area ( mm ) ( wh ) :1680 *1185 overall size ( mm ) ( w*h*d ) :1741*1246*35 packing size ( mm ) : 1890 1395 90 technology: infrared sensor technology calibration: 4 points or 9 points writing method: pen, fingers or any other pointing objects multi touch: 10 touch points communication port: usb 2.0 hotkey:20 hotkeys on each side of board outer frame:82m19 natural aluminum alloy section each / no 1 6 printers with scanner:the xerox machine comes with a3 black and white mfp with a brisk output speed of 20 ppm, providing maximum efficiency for document processing in your office. dis reliable mfp has been designed to provide you with robust performance in demanding office environments. the comes with an energy saving key, putting it instantly into sleep mode, reducing youre energy bill. • id card scan function copies both sides on to a single sheet, saving you time • two short cut keys can be customized to perform frequently performed tasks quickly general specification: continuous output speed:20 pages per minute memory standard: 256 mb power source:220 240 v, 50 / 60 hz options 1 x 500 sheet paper tray ( maximum 2 units ) , network controller ( ddst unit ) , and bypass tray cover. paper handling: recommended paper size: standard paper tray ( s ) : a3, a4, a5 by pass tray:a3, a4, a5, a6 paper input capacity standard: 350 sheets maximum: 1, 350 sheets bypass tray: 52 216 g / m² duplex: 64 105 g / m² copier:copyingprocess:laser beam scanning & electro photographic printing multiple copying: up to 99 copies resolution: up to 600 dpi zoom from 50% to 200% scanner: scan speed colour: maximum 6 originals per minute b / w:maximum 15 originals per minute interface standard: usb 2.0 option: ethernet 10 base t / 100 power consumption:lesstempthan 950 w ready mode:92 w sleep mode:2.7 w tec ( typical electricity consumption ) :1, 480 w / h each / no 1 7 15 kva 3hr back up ups for computer each / no 1 8 lan connection for systems and printers each / no 1 21 environmental engineering laboratory 1 nephelo meter turbidity meter as per astm / bis specification each / no 1 2 uv vis spectrophotometer model: xd 7500, make: lovibond germany each / no 1 3 ph meter with ph & orp electrode model: ph 700 make: eutech each / no 1 4 bod incubator model: bio bi 104a, make: biocare each / no 1 5 cod thermoreactor 24 places / holes make: tintometer ( lovibond ) each / no 1 6 cod digestion vials, high range, pk / 25 each / no 1 7 autoclave each / no 1 8 centrifuge each / no 1 9 optional item auto lpg shut off system for flame photometer each / no 1 10 optional item li filter each / no 1 11 optional item ca filter each / no 1 12 optional item auto ignition each / no 1 13 conductivity meter benchtop each / no 1 14 muffle furnace each / no 1 15 hot air oven each / no 1 16 analytical balances– internal calibration each / no 1 17 flocculator ( jar test apparatus ) each / no 1 18 student monocular each / no 1 19 electric bunsen burner each / no 1 20 referigerator each / no 1 21 hot plate each / no 1 22 3362 – all glass double distillation unit, with borosilicate each / no 1 23 colony counter – digital – desk model each / no 1 24 portable dissolved oxigen meter with optical do electrode each / no 1 25 imhoff cones each / no 1 26 chlorine test kit each / no 1 27 magnetic stirrers with hot plate 2 lts each / no 1 28 water bath rectangular ( double walled ) each / no 1 29 3082 desiccators, with cover and porcelain plate each / no 1 30 rotary shaker each / no 1 31 desktop computer withi7, 16gb, 2gb graphics 2tb hdd each / no 1 32 hp laserjet configuration black and white, print, copy, scan , 1 hi speed usb 2.0 , laser, a4 black and white laser, multifunction printer, perfect for enterprise, print, copy and scan, print speed up to 21 ppm ( black ) preinstalled introductory hp laserjet black cartridge ( ~700 pages ) installation guide, getting started guide, users guide, support flyer, warranty guide printer software and documentation on cd power cord , usb cable each / no 1 33 portable ph / conductivity meter each / no 1 34 dc power supply each / no 1 35 noise dozi meter each / no 1 36 ambient air quality analysizer kit each / no 1 glasswares each / no 1 37 gooch crucibles each / no 1 38 funnel each / no 1 39 beakers capacity: 25 ml each / no 1 40 beakers capacity: 50 ml each / no 1 41 beakers capacity: 100 ml each / no 1 42 beakers capacity: 250 ml each / no 1 43 beakers capacity: 2000 ml each / no 1 44 4980 flask , erlenmeyer, conical narrow mouth capacity: 50 ml each / no 1 45 4980 flask , erlenmeyer, conical narrow mouth capacity: 100 ml each / no 1 46 4980 flask , erlenmeyer, conical narrow mouth capacity: 250 ml each / no 1 47 4980 flask , erlenmeyer, conical narrow mouth capacity: 500 ml each / no 1 48 4980 flask , erlenmeyer, conical narrow mouth capacity: 1000 ml each / no 1 49 conical flask with interchangeable stopper capacity: 50 ml each / no 1 50 conical flask with interchangeable stopper capacity: 100 ml each / no 1 51 conical flask with interchangeable stopper capacity: 250 ml each / no 1 52 pipettes capacity: 1 ml each / no 1 53 pipettes capacity: 2 ml each / no 1 54 pipettes capacity: 5 ml each / no 1 55 pipettes capacity: 10 ml each / no 1 56 pipettes capacity: 25 ml each / no 1 57 2124 burettes, each / no 1 58 burette stand ( metal ) size:8x5x24 each / no 1 59 bod bottles , 300ml each / no 1 60 china dishes – small ( 50mm ) each / no 1 61 petri dishes size 80x17mm each / no 1 62 reagent bottle capacity: 250 ml each / no 1 63 reagent bottle capacity: 500 ml each / no 1 64 reagent bottle capacity: 1000 ml each / no 1 65 1519 bottle reagent, amber, wide mouth, graduated, with screw cap and pouring ring each / no 1 66 nesselers tube each / no 1 67 measuring cylinders capacity: 100 ml each / no 1 68 measuring cylinders capacity: 5 ml each / no 1 69 measuring cylinders capacity: 10 ml each / no 1 70 measuring cylinders capacity: 25 ml each / no 1 71 measuring cylinders capacity: 50 ml each / no 1 72 measuring cylinders capacity: 100 ml each / no 1 73 spatula 6” each / no 1 74 magnetic beads each / no 1 75 cod vials each / no 1 76 vials stand each / no 1 77 test tube holder each / no 1 78 laboratory tray each / no 1 79 beaker holder each / no 1 80 projector mativeresolution:xga 1024 x 768 brightness:3700 lumes lamp life: upto 10, 000hrs contrast ratio:16, 000:1 video compataibility:ntsc, pal hdmi:720p, 576p, 576i, 480p, 480i, 1080i, 1080p audio:audio out connector support with 16w audio output zoom focus:manual display input:vgax2 , hdmi x 2 , usb, composit av , mhl, wifi aspect ratio:4:3 and 16:9 remote :full function connectivity hdmi / vga, mhl, wifi each / no 1 81 smart board infrared interactive whiteboard interactive whiteboard is an instruction tool that allows computer images to be displayed onto a board using a digital projector. the instructor can then manipulate the elements on the board by using his finger as a mouse directly on the screen. items can be dragged, clicked and copied and the lecturer can handwrite notes, which can be transformed into text and saved. this makes the learning interactive and collaborative. specifications as per the make in india model: model:82”m19 size: 82 aspect ratio: 4:3 active area ( mm ) ( wh ) :1680 *1185 overall size ( mm ) ( w*h*d ) :1741*1246*35 packing size ( mm ) : 1890 1395 90 technology: infrared sensor technology calibration: 4 points or 9 points writing method: pen, fingers or any other pointing objects multi touch: 10 touch points communication port: usb 2.0 hotkey:20 hotkeys on each side of board outer frame:82m19 natural aluminum alloy section each / no 1 82 hp laserjet configuration black and white, print, copy, scan , 1 hi speed usb 2.0 , laser, a4 black and white laser, multifunction printer, perfect for enterprise, print, copy and scan, print speed up to 21 ppm ( black ) preinstalled introductory hp laserjet black cartridge ( ~700 pages ) installation guide, getting started guide, users guide, support flyer, warranty guide printer software and documentation on cd power cord , usb cable each / no 1 22 computer aided detailing of structures 1 desktops: computer configuration a ) processor intel i7 dual core b ) ram 8gb / 6gb c ) hard disk d ) mother board – intel chipset e ) graphics card – 1gb dedicated n vidia graphics card f ) lan g ) monitor 17” led / tft h ) keyboard i ball i ) mouse – i ball each / no 1 2 printers with scanner and copier: hp laserjet printer a3 the xerox machine comes with a3 black and white mfp with a brisk output speed of 20 ppm, providing maximum efficiency for document processing in your office. dis reliable mfp has been designed to provide you with robust performance in demanding office environments. the comes with an energy saving key, putting it instantly into sleep mode, reducing youre energy bill. • id card scan function copies both sides on to a single sheet, saving you time • two short cut keys can be customized to perform frequently performed tasks quickly general specification: continuous output speed:20 pages per minute memory standard: 256 mb power source:220 240 v, 50 / 60 hz options 1 x 500 sheet paper tray ( maximum 2 units ) , network controller ( ddst unit ) , and bypass tray cover. paper handling: recommended paper size: standard paper tray ( s ) : a3, a4, a5 by pass tray:a3, a4, a5, a6 paper input capacity standard: 350 sheets maximum: 1, 350 sheets bypass tray: 52 216 g / m² duplex: 64 105 g / m² copier:copyingprocess:laser beam scanning & electro photographic printing multiple copying: up to 99 copies resolution: up to 600 dpi zoom from 50% to 200% scanner: scan speed colour: maximum 6 originals per minute b / w:maximum 15 originals per minute interface standard: usb 2.0 option: ethernet 10 base t / 100 power consumption:lesstempthan 950 w ready mode:92 w sleep mode:2.7 w tec ( typical electricity consumption ) :1, 480 w / h each / no 1 3 hp laserjet configuration black and white, print, copy, scan , 1 hi speed usb 2.0 , laser, a4 black and white laser, multifunction printer, perfect for enterprise, print, copy and scan, print speed up to 21 ppm ( black ) preinstalled introductory hp laserjet black cartridge ( ~700 pages ) installation guide, getting started guide, users guide, support flyer, warranty guide printer software and documentation on cd power cord , usb cable each / no 1 4 autocadd 2021 ( latest version ) ( 30 users licensed software ) each / no 1 5 projector mativeresolution:xga 1024 x 768 brightness:3700 lumes lamp life: upto 10, 000hrs contrast ratio:16, 000:1 video compataibility:ntsc, pal hdmi:720p, 576p, 576i, 480p, 480i, 1080i, 1080p audio:audio out connector support with 16w audio output zoom focus:manual display input:vgax2 , hdmi x 2 , usb, composit av , mhl, wifi aspect ratio:4:3 and 16:9 remote :full function connectivity hdmi / vga, mhl, wifi each / no 1 6 lan connection for systems and printers each / no 1 7 server system for 30 computers each / no 1 8 antivirus for all systems total av antivirus pro each / no 1 9 ups and batteries 10 kva – ups10 kva ups • type: online single phase input & single phase output • capacity : 10kva • backup time: 4 hours or higher • input frequency: 50hz.+ / 5% • input voltage : 160v 270v • output voltage:230v+ / 1%v • output frequency : 50hz+ / 0.2hz. • input power factor: >0.9 • output power factor: 0.8 lag to unity • pf waveform: pure sine wave • alarm: on battery, low battery, ups over load • no. of batteries: compatible • dc voltage ( input ) :compatible • overload capacity : 150% for 1minute , 125% for 10minutes • inverter efficiency : 90% • overall efficiency: 90% • crest factor: 3:01 • regulation: + / 1% • switching frequency : above 20khz • technology: igbt based pwm technology with isolation transformer • warranty : 3 years onsite comprehensive including batteries • protection: automatic discharge protection with self test features, overload surge protection , input fault, cold start, low battery , battery over charge, output short circuit, charging current circuit, inverter over temperature • lcd display : output voltage, output current, load%, output frequency, input voltage, battery voltage • load test: at 100% load on resistive load thd: <3% for linear, <5% for non linear • certification: iso 9001:2008 or higher, etdc / cpri test report &bis certification each / no 1 23 geotechnical engineering laboratory 1 pycnometer as per is 2386 ( p iii ) 1kg glass jar with brass cone, locking ring and rubber seal. each / no 1 2 density bottle, 100 ml each / no 1 3 digital hot air oven ( temperature controlled ) dimensions 600 x 600x 600 mm, 224 ltrs, 2.5kw, 3 shelves, range 5°c above ambient to 250°c maximum, accuracy + / 2°c, power supply 220 volts each / no 1 4 digital weigh balance 0.5kg capacity with 0.001g accuracy each / no 1 5 digital weigh balance 5kg capacity with 0.01g accuracy each / no 1 6 any suitable non corrodible air tight container moisture content determination of soil samples each / no 1 7 desiccator with any suitable desiccating agent. convenient size is one about 200 to 250mm in diameter containing anhydrous silica gel. each / no 1 8 speedy moisture meter as per as per is 2720 ( p ii ) , astm d 4944 aashto t 217 wooden carrying case consisting of pressure vessel with clamp for sealing cap, rubber sealing gasket, pressure gauge in percentage moisture content 0 25% or 0 50% on the wet weight basis ( 6 gm ) counter poised balance for weighing samples, scoop for measuring calcium carbide, bottle of calcium carbide ( 500gm ) , a set of 4 steel balls and a cleaning brush. each / no 1 9 infrared moisture meter as per astm d 4944 aashto t 217 suitable for operating on 220 v, 50hz, single phase, ac supply. each / no 1 10 soil testing kit consists of : 12 thick walled test tubes with rubber bungs. 1 tube cleaning brush. 1 bottle of barium sulphate ( 100gm ) 1 bottle of soil indicator ( 100gm ) 1 bottle of distilled water ( 500gm ) 1 spatula. 1 colour chart, range 4.0 to 8.0 ph in 0.5 ph steps. complete with carrying case each / no 1 11 core cutter cylindrical core cutter made of gun metal, 100 mm dia x 130 mm long steel dolly, 25 mm high and 100 mm dia fitted with a lip, to enable it to be located on top of the core cutter rammer with steel rod each / no 1 12 sand replacement kit 1. small sand pouring cylinder, 3. cylindrical calibrating container, 4. cylindrical steel core cutter, 5. metal tray with hole conforming to is 2720 part 28 , 100mm dia each / no 1 13 soil hydrometer as per astm d 422 aashto t 88, bs 1377 2.used for grain size analysis of soils where more than 10% of the material will pass through 75 microns b.s. sieve. manufactured from clear transparent glass having uniform clarity throughout the upper end on which density scale is engraved. the scale range is 0.995 to 1.030 0 density ( gms. / cc ) at 27oc smallest division on the scale is 0.0005. each / no 1 14 high speed stirrer is 2720 ( part iv ) this is for mechanical analysis and also other laboratory applications for stirring speed approximately 4000 r.p.m. under load. a dispersion cup is supported on a rest on the stand of the stirrer and has a removable baffle. for operation on 230v a.c. supplied with dispersion cup or baffle cup. each / no 1 15 standard test sieves 20cm diameter, ( spun brass frame ) as per is :460 ( par t i, ii ) 1978, size available: 4.75mm, 2.80 mm, 2.36 mm, 3.00 mm, 1.70 mm, 1.18 mm, 180 micron, 150 micron, 125 micron, 90 micron, 75 micron, 425 micron, 300 micron, 45 micron. lid and receiver for 200 mm dia sieves, made of brass. each / no 1 16 standard test sieves 30 cm diameter, ( g.i. sheet frame ) as per is :460 ( par t i, ii ) 1978 sizes available : 20mm, 12.5mm, 10mm, 4.75mm, 2.36mm, 1.18mm, lid & receiver in g.i. sheet frame for 300mm dia. each / no 1 17 mechanical seive shaker the shaker should accommodate upto 7 nos. sieves of dia 200 or 300mm, 450mm suitable operation of 230 v a.c. single phase. electrical sieve shaker with 16 adapter each / no 1 18 casagrande liquid limit apparatus complete with casagrandes grooving tool and gauge block conforming to is 2720 part 05 each / no 1 19 cone penetration apparatus with penetration test cone and test cup ( 55 mm dia x 40 mm deep ) conforming to is 2720 part 05 each / no 1 20 plastic limit set consists of one each : i ) porcelain evaporating dish, ii ) shrinkage dish, iii ) glass cup, iv ) perspex plate with three metal prongs, v ) flexible spatula 100mm, vi ) glass cylinder, vii ) 25ml x 1ml, supplied without mercury each / no 1 21 shrinkage limit set consists of one each : i ) porcelain evaporating dish, ii ) shrinkage dish, iii ) glass cup, iv ) perspex plate with three metal prongs, v ) flexible spatula 100mm, vi ) glass cylinder, vii ) 25ml x 1ml, supplied without mercury each / no 1 22 linear shrinkage mould bs 1377 2 a simple mould which is filled with the soil under test. this is then dried and the resulting decrease length of the specimen measured is expressed as the linear shrinkage. it is 25mm dia. x 12.5mm height x 140mm length. each / no 1 23 standard proctor compaction moulds with mould 150mm internal dia x 127.3mm height, 2250ml volume ( gun metal ) , rmmer should be 2 .8 6 k g x 300m m fall, for light compaction test as per is 2720 part vii, each / no 1 24 modified proctor compaction apparatus mould mould 150mm internal dia x 127.3mm height, 2250ml volume ( gun metal ) rammer weight 4 .8 9 k g x 450mm fall, for high compaction test as per is 2720 part viii each / no 1 25 universal permeability test apparatus as per is 2720 ( part xbii ) , permeameter mould of non corrodible material ( gun metal ) having a capacity of 1000 ml, with an internal diameter of 100mm and internal effective height of 127.3mm with 0.1 mm thick.three glass stand pipes a stand with nine glass tubes of 6mm, 10mm, 20mm, 25mm, 40mm, 50mm, 60mm, 70mm, 75mm, bore tube is provided with over flow arrangement for constant head tests. the remaining tubes are used for falling head test. each / no 1 26 unconfined compression tester proving ring type ( hand operated ) as per is: 2720 ( part 10 ) :1991, load frame, hand operated, capacity 50 kn ( 5, 000 kgf ) , mould, 100mm dia x 127.3mm height ( 1, 000ml volume ) with, base plate and collar., proving ring, with integral boss, high sensitivity 2.5kn ( 250 kgf ) capacity, perforated swell plate, 100mm dia x 16mm thickdial gauge , 25mm travel, 0.01mm least count lid & receiver in g.i. frame for 300mm dia x 450mm dia sieves, spencer, 100mm dia x 12.7mm thick, pair of porous stones, 100mm dia x 12.7mm thick, load transfer bar, steel ball soaking tank, 250mm dia x 210mm high. each / no 1 27 direct shear apparatus ( motorized ) as per is: 2720 ( part viii ) , astm d 3080 for determination of the direct shear strength of soils on specimen size 60 mm x 60 mm x 25 mm. specification: the apparatus comprises of the following: loading unit: supplied with load yoke with direct and lever system for applying load. normal stress capacity 8kg / sq.cm. shear box assembly: comprising direct shear box in two halves for a square specimen size 60 x 60 x 25 mm one pair of plain gripper plates, one pair or perforated gripper plates, one pair or porous stones, one top loading pad. shear box housing: accommodates the direct shear box assembly. complete with two ball roller strips. specimen cutter:for cutting 60 x 60 x 25 mm specimen from larger samples. set of weights to give a normal stress of 3 kg / sq.cm. essential accessories: high sensitivity compression ring cap 200 kg one consolidation dial gauge 0.01 mm x 25 mm and one strain dial gauge 0.01 mm x 25 mm and one strain dial gauge 0.01 mm x 25 mm. optional extras: additional set of weights to give a normal stress of 5 kg / cm2 soil sampler for 60 mm x 60mm specimen and test from pad of 50. spares: porous stone for 60 mm x 60 mm size sample available in pairs. each / no 1 28 triaxial test apparatus as per is 2720 ( part xii ) , consisting of load frame, triaxial cell, dial gauge, proving ring & lateral pressure assembly, triaxial cells transfer bar ( loading ram ) passes through linear bearing making it almost friction free. base has four no volume change valves one each for back pressure / pore pressure, confining pressure and top drainage.one plastic drainage tube.accesories sheath stretcher, porous stones, plain discs, top drainage cap, rubber membranes ( pack of 10 ) and o rings. loading frame 50 kn capacity, rate of strain: 0.00001 9.9999 mm / min, pressure controller for confining pressure upto 1700 kpa, lateral pressure assembly: consists of a pressure chamber which has a flanged top 2 cap fitted with a 10 kg / cm . pressure gauge and a valve for pumping in air. water inlet and drain cock are fitted to the chamber. 2 the foot pump supplied easily develops a pressure of 10 kg / cm2 complete with connecting pressure hose. with electricaly operated maching with digitalstrain gauge each / no 1 29 cbr test apparatus motorized as per is : 9669, is : 2720 ( part xvi ) load frame 50kn capacity, a mould of 150 mm. i.d. x 175 mm. high with clamping lugs complete with extension collar and perforated base plate made of gun metal. a cutting collar to fit mould body. a penetration piston assembly of 50 mm. diameter and a bracket for the dial gauge. a perforated swell plate of 148 mm. diameter with an adjustable stem and lock nut. a circular spacing disc of 148 mm. diameter x 47.7 mm. high complete with a removable `t handle. a metal tripod for the dial gauge. dial gauge 2 in. travel & 0.001 in division for cbr penetration measurement, having provision for increasing the dial gauge plunger length. cbr essential : proving ring 10 kn capacityx 0.01 kn / div sensitivity / readability, dial gauge 0.01 mm. x 25 mm. travel. spares: rammer 2.6 kg & 4.89 kg.cbr mould complete with extension collar and perforated base plate, perforated swell plate with adjustable stem and lock nut, solid base plate, cutting collar, penetration piston assembly, metal tripod for dial gauge, circular spacer disc, surcharge weight ( annular ) 2.5 kg, surcharge weight ( slotted ) 2.5 kg each / no 1 30 swell test apparatus load frame, hand operated, capacity 50 kn ( 5, 000 kgf ) , mould, 100mm dia x 127.3mm height ( 1, 000ml volume ) with, base plate and collar., proving ring, with integral boss, high sensitivity 2.5kn ( 250 kgf ) capacity, perforated swell plate, 100mm dia x 16mm thickdial gauge , 25mm travel, 0.01mm least count lid & receiver in g.i. frame for 300mm dia x 450mm dia sieves, spencer, 100mm dia x 12.7mm thick, pair of porous stones, 100mm dia x 12.7mm thick, load transfer bar, steel ball soaking tank, 250mm dia x 210mm high. each / no 1 31 consolidation app. ( three gang ) as per is 2720 ( part xv ) , is 12287, bs 1377, astm d 2435, loading unit, maximum capacity 20kg / cm.sq. having a loading yoke connected to a lever arm with a counter balancing adjustment and having a lever ratio of 1:1 the whole assembly being mounted on a sturdy steel frame stand. the loading unit is so designed that it can be used for consolidation cells of different diameters as well as different dia floating ring type consolidation cells. fixed ring type consolidometer ( odeometer ) cell assembly for testing 60mm dia x 20mm thick specimen comprising: fixed ring for specimens 60mm dia x 20mm thick with guide ring. top and bottom porous stones for 60mm dia specimen. perforated pressure pad, channeled base with water inlet and gasket flanged water jacket, water reservoir with plastic tube and pinch cock. set of weights to give a pressure of 10kg / cm.sq. on 60mm dia specimen, comprising : 7 nos. 0.05 kg / cm .sq., 5nos. 0.1 kg / sq.cm., 6nos. 0.5kg / sq. cm., and 5 nos. 1.0 kg / sq.cm. supplied complete as above but without dial gauge. dial gauge 0.002 mm x 10mm. extension piece, 40 mm long, consolidation test forms pad of 50 for one dimensional consolidation. each / no 1 32 vane shear apparatus as per is 2720 ( part 30 ) 1980. consists of a torque head adjustable in height by means of a lead screw rotated by a drive wheel to enable the vane to be lowered into the specimen. rotation of the vane is by means of a hand wheel which operates a worm gear arrangement turning the upper end of a calibration torsion spring, vane dia, rod dia, vane size & vane height are as per is specifications. the vane shall consist of 4 blades each fixed at 90 degrees to the adjacent blades. the vane blades shall be welded together suitably to a central rod, the maximum diameter of which should preferably not exceed 2.5mm in the portion of the rod which goes into the specimen for the test.the vane shaft is attached through the hollow upper shaft to a resettable pointer, which indicates the angle indicates the angle of torque on a dial graduated in degree the dial reading multiplied by spring factor gives the torque a container for soil sample is also supplied & a sampling tube of 38mm. i.d. & 150mm long can also be used as container . supplied with set of four springs, one each of approx. 2 kgs / cm sq., 4kgs / cm sq., 6 kgs / cm sq. & 8kgs / cm sq. complete as above in a wooden carrying case each / no 1 33 relative density test as per is 2720 ( part xiv ) , the equipment consists one each of: vibratory table, with a cushioned steel vibrating decks about 75cm x 75cm. it has a frequency of approximately 3600 vibratory table, minute under a 11.5kg load. amplitude is variable in between 0.65mm in step of 0.05 to 0.25mm, 0.25 to 0.45 mm and 0.45 to 0.65mm. suitable for operations on 415v, three phase supply. cylindrical metal unit weight mould, 3000ml. capacity.guide sleeve with clamp assembly. surcharges base plate for mould. handle for surcharge base plate. surcharge weight. the total weight together with surcharge base plate and handle is equipment to 140 kg. / sq. cm. for mould. cylindrical metal unit weight mould 15000 ml. capacity. ( total weight together with the above mould & surcharge weight is equivalent to 140 kg. / sq. cm ) dial gauge 0.01mm x 50mm travel. extension piece 25mm for dial gauge. each / no 1 34 proctor needles ( spring type ) as per astm d 1558 the instrument consists of a needle attached to a spring loaded plunger, the stem of which is calibrated to read 0 to 40 kg division. long stem is graduated at every 12.5mm to read depth of penetration and for use with needles of larger areas. the small penetration stem is also graduation in 12.5mm division and is used with needles of smaller areas. needle points one each of 0.25, 0.5, 1.0, 1.5, 2.0, 3.5 and 6.0 sq cm. and one tommy pin is supplied. complete as above in a wooden carrying case. each / no 1 35 pore pressure apparatus 10kg / cm2 the apparatus consists of a panel for wall mounting on which are fitted 1.0 to 10kg / cm sq x 0.1kg cm. sq. a pressure gauge, bourdon tube type 15 cm dia.glass u tube manometer , 50ml burette for measuring the volume change in the soil specimen. pressure pump fitted with four sleeve packed valves, operated by means of a hand wheel on the end of the piston rod which is threaded through the pump cap and gives a smooth, fine adjustment of pressure. copper coil and water reservoir is fitted on board with complete stand assembly. the unit is tested against leaks up to 10kg / cm sq. each / no 1 36 split spoon sampler as per is 2131 1963, is 9640 1980 the sampler is made from a steel tube split length wise & held together by a head fitted with a ball check valve & a hardened steel shoe in size cutting edge of 35mm dia. the sampler is 35mm i.d. & 50.8mm in outer dia & 508mm long. one adopter to connect a type drill rods is also to be supplied. each / no 1 37 standard penetration test set as per is 2131, is 9640 consist of three metal pipe legs approximately 5 mtr. long connected by a tie bolt each leg is made up of two parts for ease of transportation complete with one pulley one leg has building ladder each / no 1 38 drop hammer and guide pipe weight 65 kg. complete with two end caps to give a free fall of 75cm the drop hammer each / no 1 39 dynamic cone penetration test consists of 8 kg weight having a drop of 575 mm, fitted to the end of the shaft is a 20 mm diameter cone. with the standard dcp measurements can be made down to a depth of approximately 850 mm. each / no 1 40 static cone penetrometer, 30kn ( 300kgf ) capacity, hand operated consists of penetration cone, steel 60 angle 10cm base area with friction jacket one mantle tube, non uniform , 36mm od at the two ends and reduced dia in between with sounding rod working length 1mfifteen. load measuring head, with automatic cut off valve and oil can, without pressure gauge one pressure gauge, 0 60kg / cm 2 pressure gauge, 0 160kg / cm one 06 ) screw anchor , with bolt four anchor driving handle one t rod one spanner one extension pipe 0.5m long for anchor driving handle four each / no 1 41 auger posthole type posthole type: ( a ) 100mm dia screw type: ( a ) 38mm, ( c ) 50mm ( c ) 100mm dia extra: extension rod 1 meter length with threading at both ends and couplings, set of two spanners and tee piece. each / no 1 42 sampling tubes in the relieved type of tube, the internal diameter is relieved by about 0.5mm ( inside clearance 2% ) beyond approx. 19mm length from the cutting edge of the tube. unrelieved type of 150mm dia, each / no 1 43 projector mativeresolution:xga 1024 x 768 brightness:3700 lumes lamp life: upto 10, 000hrs contrast ratio:16, 000:1 video compataibility:ntsc, pal hdmi:720p, 576p, 576i, 480p, 480i, 1080i, 1080p audio:audio out connector support with 16w audio output zoom focus:manual display input:vgax2 , hdmi x 2 , usb, composit av , mhl, wifi aspect ratio:4:3 and 16:9 remote :full function connectivity hdmi / vga, mhl, wifi each / no 1 44 smart board infrared interactive whiteboard interactive whiteboard is an instruction tool that allows computer images to be displayed onto a board using a digital projector. the instructor can then manipulate the elements on the board by using his finger as a mouse directly on the screen. items can be dragged, clicked and copied and the lecturer can handwrite notes, which can be transformed into text and saved. this makes the learning interactive and collaborative. specifications as per the make in india model: model:82”m19 size: 82 aspect ratio: 4:3 active area ( mm ) ( wh ) :1680 *1185 overall size ( mm ) ( w*h*d ) :1741*1246*35 packing size ( mm ) : 1890 1395 90 technology: infrared sensor technology calibration: 4 points or 9 points writing method: pen, fingers or any other pointing objects multi touch: 10 touch points communication port: usb 2.0 hotkey:20 hotkeys on each side of board outer frame:82m19 natural aluminum alloy section each / no 1 45 printers : hp laserjet printers a4 size hp laserjet configuration black and white, print, copy, scan , 1 hi speed usb 2.0 , laser, a4 black and white laser, multifunction printer, perfect for enterprise, print, copy and scan, print speed up to 21 ppm ( black ) preinstalled introductory hp laserjet black cartridge ( ~700 pages ) installation guide, getting started guide, users guide, support flyer, warranty guide printer software and documentation on cd power cord , usb cable each / no 1 24 research laboratory 1 2000 kn loading frame each / no 1 2 hydraulic jacks – 1000 kn and 2000 kn, low capacity ( 100 kn and 30 kn ) mechanical jacks each / no 1 3 load cell with digital load indicators – 500 kn, 1000 kn and 2000 kn each / no 1 4 universal testing machine ( 600 kn capacity ) each / no 1 5 portable high speed 4 channel data acquisition system with filters and supporting software and note book pc each / no 1 6 seismic accelerometers with accessories – each / no 1 7 a ) digital demec gauges , each / no 1 b ) digital dial gauges mechanical strain gauges each / no 1 8 4 channel high speed usb supported data acquisition system with filters and software each / no 1 9 seismic accelerometers ( high sensitivity icp type ) with accessories each / no 1 10 finite element analysis package – static and dynamic analysis with linear and non linear analysis modules each / no 1 11 shock table testing facility ( 4.2m x 3.5m ) with a 1400.0kg mass pendulum impacting device each / no 1 12 computerized servo controlled compression testing machine, 2000.0kn capacity, specially designed for testing of masonry prisms each / no 1 25 elements of mechanical engineering 1 cut sectional demonstration model of 2 stroke petrol engine 2 stroke, single cylinder petrol engine test rig with mechanical loading air cooled. description • engine : bajaj • horse power : 1.5 hp. • rated speed : 900 rpm with gear ratio • cooling : air cooled • loading : by rope brake drum with 2 spring balances. • starting : kick start • speed measurement : by digital rpm indicator with proximity sensor • air flow measurement : by air box , orifice with transparent acrylic manometer • fuel measurement : by pipette and stop clock • temperature measurement : by digital temperature indicator with eight way channel selector • engine frame : mounted on anti vibration mounts. • instrumentation : mounted on separate control panel. • calorimeter type ( optional ) : shell and tube type each / no 1 2 cut sectional demonstration model of 4 stroke petrol engine 4 stroke, single cylinder, petrol engine test rig panel a well designed and supported by a good quality painted rigid m.s. structure consists of • speed measurement : by digital rpm indicator with proximity sensor • water flow measurement : by water meter. • air flow measurement : by orifice in air box & transparent acrylic manometer air tank fitted with orifice and water manometer • fuel measurement : by fuel pipette & stop clock fuel measuring system consists of a fuel tank, a burette and a three way cock. • temperature measurement : by digital temperature indicator with eight way channel selector • engine frame : mounted on anti vibration mounts • instrumentation : mounted on separate control panel. • exhaust gas calorimeter : shell and tube type ( optional ) each / no 1 3 francis turbine model each / no 1 4 pelton wheel turbine model description • rotor : 250 mm diameter, 20 cups, aluminium • output : 1.5 hp at 1000rpm • sphere valve assembly : s.s, 20 mm jet. • loading : rope brake drum, 350 mm diameter. spring balance of 0 10 kg. • operating head : 30 50 m • monoblock pump : 5 hp, two stage standard make. • tanks ( s.s ) : sump tank 250 ltrs. capacity • starter : standard make with indicator. • digital speed indicator : with proximity sensor, for rpm measurement. • pressure gauge : 2 nos. • discharge measurement : 2” venturimeter, coated m.s • controlling valves : 1 no, wheel valve • supply : 3 ph, 440 v, 32 amps to be provided by user. • separate control panel : wooden sheet & square tubes each / no 1 5 kaplan turbine model description • rotor : 150 mm diameter, 4 blades, gun metal / c.i. with angle changing mechanism. • out put : 1.5 hp @ 900 rpm. • volute casing : c.i. • loading : alternator, standard make, 2 3 kva, ( lamp loading, 10 nos, 200 w ) . • operating head : 5 10 m. • monoblock pump : standard make, 10 hp. • tanks ( s.s ) : sump tank – 880 ltrs. capacity • starter : standard make with mcb, console switch and red indicator. • digital speed indicator : with proximity sensor for rpm measurement. • energy meter : for out put measurement, standard make. • discharge measurement : venturimeter or bend meter, s.s. • pressure gauge : 2 nos. • vacuum gauge : 1 no. 0 760 mm of hg • controlling valves : 6 inch, butterfly valve. • supply : 3 ph, 440 v, 32 amps to be provided by user. • separate control panel : wooden sheet & square tubes. each / no 1 6 centrifugal pump actual cut section each / no 1 7 vapor compression refrigeration system demo model each / no 1 8 vapor absorption refrigeration system demo model each / no 1 9 gear box demonstration model each / no 1 10 demo model of open and cross belt drives each / no 1 11 robot joints and links ( demo purpose ) each / no 1 12 air conditioning system ( demo model ) each / no 1 26 chemistry laboratory 1 potentiometer ( make: systronics 318 ) specification: input configuration : bipolar, milli volt range : 0 to + / 1999 mv, resolution : 1 mv in mv mode, display : 3 digits led, control set zero range : 0 to + / 1500mv input, stirrer speed : 0 to full speed switch : hold reading when pressed control set zero range : 0 to + / 1500mv input stirrer speed : 0 to full speed switch : hold reading when pressed polarization current : 10 μa for metal to metal electrode input impedance : 10¹¹ ohms polarity : automatic over range : last 3 digits blinking magnetic stirrer : in built with variable control display : 3 ½ digit led power : 230v ac. ±10%, 50 hz dimensions : 235 ( w ) x 185 ( d ) x 85 ( h ) mm weight : 1.25 kg ( approx ) accessories: combined platinum & calomel electrode ( or ) platinum & calomel electrode, electrode stand & clamp, stirrer pedal & instruction manual. each / no 1 2 colorimeter ( make: systronics 113 ) specification: wavelength: 400 to 700 nm selected 6 filters mounted on a turret, light source : 6 volt led, detector: encased spill proof selenium photo cell, display: 3 digit, calibrated directly in optical density, resolution: 0.01 in o.d or abs, standard : turret mounted filters, power: 230v ac + 10%, 50 hz, weight: 4 kg. accessories: four flat bottom test tubes, cuvettes with stand, instruction manual. filters: colour wavelength ( nm ) violet 420 blue 440 blue / green 490 green 520 yellow / green 540 yellow 570 orange 600 red 720 each / no 1 3 conductometer ( make: systronics –mk 509 ) digital model for routine measurement of conductivity of various electrolytes. the instrument using the state of art ic technology and consuming very little power. source frequency ( 100 hz or 1 khz ) gets automatically in the appropriate range. specification: source frequency: 100 hz or 1 khz automatically selected. range: 0 to 200 ms in 5 ranges, accuracy : + / 1 digit indication : 2 ½ digit led display, conductivity cell : 1 cell constant cell compensation : 0.9 to 1.1, power requirement: 230 volt, 50 hz + / 10% standard accessories: 1 ) conductivity cell ( 1.00 c.c + / 10% ) , 2 ) stand & clamp, 3 ) instruction manual. each / no 1 4 ph meter ( make: systronics ) digital model, high precision type for routine chemical analysis work in the laboratory having latest technology ic regulators and lsi circuits. housed in rust proof injection moulded cabinet. specification: ph range : 0 to 14 ph, slope correction : 80% to 110% resolution : 0.01 ph, repeatability : + / 0.01 ph + / 1 digit for ph standardization range: + / 2 ph, temperaturecompensation: 0 to 100 ° c display : 3 ½ digit lcd 7 segment with automatic polarity & decimal point power : 230 volts + / 10% 50 hz, 10va. accessories: combined electrode, stand & clamp and instruction manual. each / no 1 5 aquarium motor ( fish aquarium motor ) jp 700g multi function submersible pump excellent internal filter with pump for small aquariums. recommended for tropical set up only. not suggested for planted tank or marine set up, model : jp 700g, voltage : 110v / 220v / 240v, frequency : 50hz / 60hz power : 12w, h max : 1.2m output : 650h, weight 0.40kg dimensions : 90*51*100mm each / no 1 6 ostwald’s viscometer size: 120x1 mm ( length x internal diameter ) overall height : 237 mm, material : borosil glass each / no 1 7 digital stop clock stainless steel with powder coated paint, digital model, high precision type for routine chemical analysis work in the laboratory. housed in rust proof injection moulded cabinet. each / no 1 8 a laboratory thermometer, which is colloquially known as the lab thermometer, is used for measuring temperatures other than the human body temperature. laboratory thermometers are designed for lab purposes such as checking boiling point, freezing point, or temperature of other substances. specification: it ranges from 10 °c to 110 °c. max. measureable temp.: not less than + 110 °c. min. measurable temp.: not more than + 10 °c. accuracy: the maximum permissible scale error shall not be more than one scale division. length of the thermometer: 300 mm ( +10% variation is acceptable ) . length of main scale: 180mm ±10% scale smallest division: not more than 0.5 °c. bulb length: not less than 10mm and not more than 25mm. stem diameter: not less than 5.5mm and not more than 8mm. bulb diameter of the thermometer: not more than the stem diameter. colour of indicator: red / green / mercury the thermometer shall comply: is 2480. glass thermometer with accurate readings. 100°c thermometer = 5 nos 250°c thermometer = 5 nos. each / no 1 9 calomel electrode ( suitable for systronics 318 ) specification: single junction calomel electrode made up of platinum wire, hg, hg / hgcl2 and saturated kcl solution mounted with glass material. each / no 1 10 platinum electrode ( suitable for systronics 318 ) specification: single junction platinum electrode made up of platinum wire mounted with glass material. each / no 1 11 conductivity cell ( suitable for systronics –mk 509 ) specification: glass type conductivity cell cd 10 ( 1.0 cc ) made up of two paired platinum wire mounted with polymer material. each / no 1 12 glass electrode ( suitable for systronics 335 ) specification: single junction glass electrode made up of silver wire connected to internal reference electrode ( ag / agcl ) mounted with glass material. each / no 1 13 computer ( desktop ) make: dell ( new inspiron 3910 desktop, ultra processor, 12 g ) specification: 12th gen intel® core™ i5 12400 ( 18 mb cache, 6 cores, 12 threads, 2.50 ghz to 4.40 ghz turbo ) windows: 11 home single language, english video card: intel® uhd graphics 730 memory: 8 gb, 1 x 8 gb, ddr4, 3200 mhz hard drive: 256 gb, m.2, pcie nvme, ssd + 1 tb, 7200 rpm, 3.5 inch, sata, hdd fall back color: 180w psu chassis with bronze epa, ports & slots. each / no 1 14 printers : hp laserjet printers a4 size hp laserjet configuration black and white, print, copy, scan , 1 hi speed usb 2.0 , laser, a4 black and white laser, multifunction printer, perfect for enterprise, print, copy and scan, print speed up to 21 ppm ( black ) preinstalled introductory hp laserjet black cartridge ( ~700 pages ) installation guide, getting started guide, users guide, support flyer, warranty guide printer software and documentation on cd power cord , usb cable each / no 1 12 projector mativeresolution:xga 1024 x 768 brightness:3700 lumes lamp life: upto 10, 000hrs contrast ratio:16, 000:1 video compataibility:ntsc, pal hdmi:720p, 576p, 576i, 480p, 480i, 1080i, 1080p audio:audio out connector support with 16w audio output zoom focus:manual display input:vgax2 , hdmi x 2 , usb, composit av , mhl, wifi aspect ratio:4:3 and 16:9 remote :full function connectivity hdmi / vga, mhl, wifi each / no 1 27 research laboratory 1.c programming laboratory 1.computers ( wi fi enabled ) computers:7thgeneration corei5 / i7, 8gb ram, 1tb hdd, 2gb graphics, 23.8 fhd windows 10 all in one desktop pc with wi fi enabled each / no 1 2.server computer higher end specifications each / no 1 printers : hp laserjet printers a4 size hp laserjet configuration black and white, print, copy, scan , 1 hi speed usb 2.0 , laser, a4 black and white laser, multifunction printer, perfect for enterprise, print, copy and scan, print speed up to 21 ppm ( black ) preinstalled introductory hp laserjet black cartridge ( ~700 pages ) installation guide, getting started guide, users guide, support flyer, warranty guide printer software and documentation on cd power cord , usb cable each / no 1 ups and batteries 10 kva – ups10 kva ups • type: online single phase input & single phase output • capacity : 10kva • backup time: 4 hours or higher • input frequency: 50hz.+ / 5% • input voltage : 160v 270v • output voltage:230v+ / 1%v • output frequency : 50hz+ / 0.2hz. • input power factor: >0.9 • output power factor: 0.8 lag to unity • pf waveform: pure sine wave • alarm: on battery, low battery, ups over load • no. of batteries: compatible • dc voltage ( input ) :compatible • overload capacity : 150% for 1minute , 125% for 10minutes • inverter efficiency : 90% • overall efficiency: 90% • crest factor: 3:01 • regulation: + / 1% • switching frequency : above 20khz • technology: igbt based pwm technology with isolation transformer • warranty : 3 years onsite comprehensive including batteries • protection: automatic discharge protection with self test features, overload surge protection , input fault, cold start, low battery , battery over charge, output short circuit, charging current circuit, inverter over temperature • lcd display : output voltage, output current, load%, output frequency, input voltage, battery voltage • load test: at 100% load on resistive load thd: <3% for linear, <5% for non linear • certification: iso 9001:2008 or higher, etdc / cpri test report &bis certification each / no 1 5.batteries rack capacity of 20 to 25 batteries each / no 1 network printer hp jet 4240n network ready laser printer printing technology laser, inkjet brand hewlett packard connectivity technology usb printer output monochrome print media paper ( plain ) duplex no hardware interface usb 2.0 max printspeed monochrome 40 ppm item weight 60 pounds see less about this item up to 40 ppm letter print speed 1200 dpi resolution 460 mhz processor / 64 mb ram memory up to 512 mb ram via two industry standard 100 pin ddr dimm slots 58.00 lbs ( wxlxh ) 23.60 x 19.70 x 21.30 each / no 1 7.networking for 20 nodes cat6 utp cable ( box of 305 mtrs ) , 24 port ethernet networking switch – sr224 cisco, i / o with smb, jack panel – 24 ports cat6 patch cable ( 3 mts ) , rj 45 connectors, 1” flexible pipe per runnining mtr, 2” flexible pipe per running mts, networking rack each / no 1 8.air conditioners for labs centralized ac with duct system each / no 1 projector mativeresolution:xga 1024 x 768 brightness:3700 lumes lamp life: upto 10, 000hrs contrast ratio:16, 000:1 video compataibility:ntsc, pal hdmi:720p, 576p, 576i, 480p, 480i, 1080i, 1080p audio:audio out connector support with 16w audio output zoom focus:manual display input:vgax2 , hdmi x 2 , usb, composit av , mhl, wifi aspect ratio:4:3 and 16:9 remote :full function connectivity hdmi / vga, mhl, wifi each / no 1 2.analog and digital electronics lab / microcontroller lab arm / 7tdmi / lpc2148 kit including all interface and accessoreies arm / 7tdmi / lpc2148 kit including all interface and accessoreies each / no 1 patch cords patch cords each / no 1 cro probes cro probes each / no 1 pcb spring board pcb spring board each / no 1 ics: ics: 555 ua741, 7400, 7402, 7404, 74138, 74151 7490, 7495, 7486, 7410, 7420, 7408, 7432, 7410, 7490, 7476 each / no 1 resistors: 100k, 10 k, 1k, 270 ω, 22k, 4.7 k, 15k, 7 k, 5k, 33 k, 6.8 k, 3.3 k, 2.2 k, 90 k, 470 ω, 8.2 k, 47 k, 1.8 k, 10 k , potentiometer 90k, 20k resistors: 100k, 10 k, 1k, 270 ω, 22k, 4.7 k, 15k, 7 k, 5k, 33 k, 6.8 k, 3.3 k, 2.2 k, 90 k, 470 ω, 8.2 k, 47 k, 1.8 k, 10 k , potentiometer 90k, 20k each / no 1 capacitor:1 uf, 0.47 uf, 0.01 uf, 0.1 uf, dc supply: +5 volts 1a, ±12 volts 500 ma socket: 5 nos 16 / 20 pin zif socket bread board: 1 nos 680 tie points logic i / p: 16 nos toggle switches for inputs logic o / p: 16 nos high bright leds for outputs ttl clock: 1hz, 10hz, 100hz, 1 khz, 10 khz display: 2 nos 7segment display mono pulse: 1 hi & 1 low pulse terminals: 4mm bt 15 terminals each / no 1 ups and batteries 10 kva – ups10 kva ups • type: online single phase input & single phase output • capacity : 10kva • backup time: 4 hours or higher • input frequency: 50hz.+ / 5% • input voltage : 160v 270v • output voltage:230v+ / 1%v • output frequency : 50hz+ / 0.2hz. • input power factor: >0.9 • output power factor: 0.8 lag to unity • pf waveform: pure sine wave • alarm: on battery, low battery, ups over load • no. of batteries: compatible • dc voltage ( input ) :compatible • overload capacity : 150% for 1minute , 125% for 10minutes • inverter efficiency : 90% • overall efficiency: 90% • crest factor: 3:01 • regulation: + / 1% • switching frequency : above 20khz • technology: igbt based pwm technology with isolation transformer • warranty : 3 years onsite comprehensive including batteries • protection: automatic discharge protection with self test features, overload surge protection , input fault, cold start, low battery , battery over charge, output short circuit, charging current circuit, inverter over temperature • lcd display : output voltage, output current, load%, output frequency, input voltage, battery voltage • load test: at 100% load on resistive load thd: <3% for linear, <5% for non linear • certification: iso 9001:2008 or higher, etdc / cpri test report &bis certification each / no 1 150 kvh batteries exide make 12v 150 / 200 ah smf batteries each / no 1 computer lab projector mativeresolution:xga 1024 x 768 brightness:3700 lumes lamp life: upto 10, 000hrs contrast ratio:16, 000:1 video compataibility:ntsc, pal hdmi:720p, 576p, 576i, 480p, 480i, 1080i, 1080p audio:audio out connector support with 16w audio output zoom focus:manual display input:vgax2 , hdmi x 2 , usb, composit av , mhl, wifi aspect ratio:4:3 and 16:9 remote :full function connectivity hdmi / vga, mhl, wifi each / no 1 staff hp laserjet configuration black and white, print, copy, scan , 1 hi speed usb 2.0 , laser, a4 black and white laser, multifunction printer, perfect for enterprise, print, copy and scan, print speed up to 21 ppm ( black ) preinstalled introductory hp laserjet black cartridge ( ~700 pages ) installation guide, getting started guide, users guide, support flyer, warranty guide printer software and documentation on cd power cord , usb cable each / no 1 department and staff laptop computers:7thgeneration corei5 / i7, 8gb ram, 1tb hdd, 2gb graphics, 23.8 fhd windows 10 all in one desktop pc with wi fi enabled each / no 1 c programming laboratory computers ( wi fi enabled ) computers:7thgeneration corei5 / i7, 8gb ram, 1tb hdd, 2gb graphics, 23.8 fhd windows 10 all in one desktop pc with wi fi enabled each / no 1 computer network laboratory / mobile application developmen / artificial intelligence and machine learning laboratory server computer higher end specifications each / no 1 printers : hp laserjet printers a4 size hp laserjet configuration black and white, print, copy, scan , 1 hi speed usb 2.0 , laser, a4 black and white laser, multifunction printer, perfect for enterprise, print, copy and scan, print speed up to 21 ppm ( black ) preinstalled introductory hp laserjet black cartridge ( ~700 pages ) installation guide, getting started guide, users guide, support flyer, warranty guide printer software and documentation on cd power cord , usb cable each / no 1 ups and batteries 10 kva – ups10 kva ups • type: online single phase input & single phase output • capacity : 10kva • backup time: 4 hours or higher • input frequency: 50hz.+ / 5% • input voltage : 160v 270v • output voltage:230v+ / 1%v • output frequency : 50hz+ / 0.2hz. • input power factor: >0.9 • output power factor: 0.8 lag to unity • pf waveform: pure sine wave • alarm: on battery, low battery, ups over load • no. of batteries: compatible • dc voltage ( input ) :compatible • overload capacity : 150% for 1minute , 125% for 10minutes • inverter efficiency : 90% • overall efficiency: 90% • crest factor: 3:01 • regulation: + / 1% • switching frequency : above 20khz • technology: igbt based pwm technology with isolation transformer • warranty : 3 years onsite comprehensive including batteries • protection: automatic discharge protection with self test features, overload surge protection , input fault, cold start, low battery , battery over charge, output short circuit, charging current circuit, inverter over temperature • lcd display : output voltage, output current, load%, output frequency, input voltage, battery voltage • load test: at 100% load on resistive load thd: <3% for linear, <5% for non linear • certification: iso 9001:2008 or higher, etdc / cpri test report &bis certification each / no 1 batteries rack 25 batteries each / no 1 network printer hp jet 4240n network ready laser printer printing technology laser, inkjet brand hewlett packard connectivity technology usb printer output monochrome print media paper ( plain ) duplex no hardware interface usb 2.0 max printspeed monochrome 40 ppm item weight 60 pounds see less about this item up to 40 ppm letter print speed 1200 dpi resolution 460 mhz processor / 64 mb ram memory up to 512 mb ram via two industry standard 100 pin ddr dimm slots 58.00 lbs ( wxlxh ) 23.60 x 19.70 x 21.30 each / no 1 networking for 20 nodes cat6 utp cable ( box of 305 mtrs ) , 24 port ethernet networking switch – sr224 cisco, i / o with smb, jack panel – 24 ports cat6 patch cable ( 3 mts ) , rj 45 connectors, 1” flexible pipe per runnining mtr, 2” flexible pipe per running mts, networking rack each / no 1 air conditioners for labs centralized ac with duct system each / no 1 projector mativeresolution:xga 1024 x 768 brightness:3700 lumes lamp life: upto 10, 000hrs contrast ratio:16, 000:1 video compataibility:ntsc, pal hdmi:720p, 576p, 576i, 480p, 480i, 1080i, 1080p audio:audio out connector support with 16w audio output zoom focus:manual display input:vgax2 , hdmi x 2 , usb, composit av , mhl, wifi aspect ratio:4:3 and 16:9 remote :full function connectivity hdmi / vga, mhl, wifi each / no 1 28 department of mechanical and smart manufacturing 1.metallurgical inverted microscope • type of product co axial research metallurgical microscope vision plus • magnification 40x–1000x • illumination incident light through epi – illuminator with field aperture diaphragm and filter slots. continuously variable luminosity control through built in electronic transformer. • focusing co–axial focusing module with slides travelling on bearing guide ways. • optical tube binocular • eye pieces quadruple revolving nosepiece for quick magnification change with positive click stops for proper centering. compensating high eye point wide field eyepiece 10x. • stages large graduated mechanical stage with low drive co – axial controls for x–y movements on the ball slides. • objectives achromatic flat – field metallurgical corrected and anti mount fungus m5x, m10x, m45x, & m100x ( oil ) . • filters green & blue. • focusing: co–axial focusing module with slides each / no 1 2.fatigue test specification ft 200 max. bending moment ( kg. cm ) 200 bending moment adjustable ( kg.cm ) 25 200 ranges : 1 kg.cm ii kg.cm 25 125 125 200 gripping dia of specimen ( mm ) = 12 testing dia of specimen ( mm ) = 8 rotating speed in rpm =4200 accuracy of applied bending moment =±1% mechanical counter: no. of digits multiplying factor= 63 power required in hp 0.5 main supply 3ph 440v 50hz overall size ( mm ) 1000l x 500w x 600h weight ( kg ) 120 each / no 1 29 manufacturing process lab 1 foundry and forging laboratory iii sem 1 universal strength testing machine & attachments sand testing equipments each / no 1 2 shear strength attachments sand testing equipments each / no 1 3 tensile strength attachments sand testing equipments each / no 1 4 permeability tester sand testing equipments each / no 1 5 corehardness tester sand testing equipments each / no 1 6 mouldhardness tester sand testing equipments each / no 1 7 sieve analysis test setup sand testing equipments each / no 1 8 clay content tester sand testing equipments each / no 1 9 sanddrier sand testing equipments each / no 1 10 moisture content tester sand testing equipments each / no 1 11 clay washer along with the accessories each / no 1 12 sand rammer sand testing equipments each / no 1 13 flatteners 2 moulding tools each / no 1 14 tongs 18 moulding tools each / no 1 15 ball peen hammer tools used for foundry and forging each / no 1 16 cross peen hammer tools used for foundry and forging each / no 1 17 wooden log 18x 24 tools used for foundry and forging each / no 1 18 g i buckets 15 liters tools used for foundry and forging each / no 1 19 surface block 18x 18 tools used for foundry and forging each / no 1 20 centrifugal blower tools used for foundry and forging each / no 1 21 power hammer tools used for foundry and forging each / no 1 22 omega lpg fire hearth furnace chamber type, robust heavy duty construction, lined with high density ceramic fiber modules and blankets. gas ( png / lpg ) , automatic operation with auto ignition and flame monitoring system. sealing of the vertical lift doors and bogie through pneumatically operated soft seal clamps to ensure no ingress of cold air. thermal calibration as per api standards. each / no 1 23 coal fired smithy furnace both fire & ordinary brick size 3”x3”x5.9” gratingsfired ( two side fire each furnace ) , blower with kirloskar motor with starter ( 5hp, 2800rpm ) , interconnecting pipe reducer 3 inch pipe each / no 1 24 mini cupola 5kgs, operating temp 1500 c, 6kw, 230volt / single phase, crucible, heating element: 80 / 20 nichrome wire, insulation: by brick or ceramic fibre each / no 1 25 first aid box safety tools each / no 1 26 aluminium melting furnace capacity 5 kgs, operating temp 1200 c, rating 4.5 kw, 230 volt / single phase crucible 5 kg, chamber: high alumina content grooved brick temperature control. heating each / no 1 27 empty metallic drums forging tools each / no 1 28 swage block 50kg castiron forging tools each / no 1 29 anvil 50kg castiron forging tools each / no 1 30 anvil 100kg cast iron forging tools each / no 1 31 round tong, flat tong, square tong & bent tong forging tools each / no 1 32 swages top & bottom ¼“ms handle forging tools each / no 1 33 fuller top & bottom ¼“ ms handle forging tools each / no 1 34 hammer 2lb double headed forging tools each / no 1 35 sledge hammer 8lb wooden handle forging tools each / no 1 36 shovels moulding tools each / no 1 37 flatters forging tools each / no 1 38 set hammers ¼“ ms handle forging tools each / no 1 39 poker forging tools each / no 1 40 hot chisel ¼“ ms handle forging tools each / no 1 41 cold chisel l¼“ mshandle forging tools each / no 1 42 punches ½ round forging tools each / no 1 43 punches ½ square forging tools each / no 1 44 green sand ( bentonite & coal dust mixed ) moulding tools each / no 1 45 silica sand ( bentonite & coal dust mixed ) moulding tools each / no 1 46 bentonite powder moulding tools each / no 1 47 coal dust moulding tools each / no 1 48 tool kit gi box: ( peen & round rammer, rectangular trowel, smoother 4, leaf trowel big & small, lifter, ventwire, sprue pin, cleaner, divider 6”, drawspike, steelrule ( 300mm ) forging tools each / no 1 49 moulding boxes ( 12”x12”x4” ) cope drag ms forging tools each / no 1 50 teak wood leveller ( 18”x2”x1½” ) forging tools each / no 1 51 dumble split pattern 9”x3” ( aluminium ) forging tools each / no 1 52 single piece pattern step pulley ( aluminium ) forging tools each / no 1 53 split pattern groove pulley ( aluminium ) forging tools each / no 1 54 shovel standard size forging tools each / no 1 55 match plate pattern 9”octogonal block forging tools each / no 1 56 pelton wheel cup ( aluminium ) forging tools each / no 1 57 bellow 1’ forging tools each / no 1 58 pentagonal block self cored ( aluminium ) forging tools each / no 1 59 hexagonal block self cored ( aluminium ) forging tools each / no 1 60 core box split ( 6”x4”x4”, 40mmhole ) aluminium forging tools each / no 1 61 crucible ( graphite 20kg capacity ) forging tools each / no 1 62 abc core oil forging tools each / no 1 63 steel rule forging tools each / no 1 30.manufacturing process lab ii – iv sem 1 tool and cutter grinder with attachments tool and cutter grinder: with all necessary attachments to grind all types of metals 1hp 3 phase 2800 rpm bench grinder with grinding wheels size 10” x 1, 2 no. wheel ( one fine & one coarse ) fitted with wheel guard, tool rest. working surface of table 500 x 225 mm. table travel 525 x 250. magnet chuck suitable 200 x 450 mm. max. distance center of spindle to table 340 mm. vertical down feed on hand wheel 0.01mm. micro feed ( elevation ) 0.02 / 1 div. wheel speed 2800 rpm. wheel dimension grinding 178 x 31.75 x 12.7 mm. spindle motor 3 phase 1 hp each / no 1 2 horizontal milling machine with complete accessories. accessories include with above machine: 1 hp 1440 rpm 3 phase electric motor : 1 no. r / f switch, v belt & fittings : 1 no. coolant pump & fittings : 1 no. vertical attachment : 1 no. foundation rubber pad : 4 nos. oil – can : 1 no. allen key set : 1 no. spanner set each / no 1 3 radial drilling machine radial drilling machine: with complete accessories radial drilling machine: heavy duty radial drilling machine 25mm cap / 8 speed / 200mm travel with fine feed attachment. accessories include with above machine: 1 hp 1440 rpm 3 phase ele. motor for drilling : 01no 150mm capacity drill vice : 01no 0.5 hp 1440 rpm 3 phase ele. motor for lifting : 01no drill bit 12 mm capacity : 01no r / f switch : 02nos box table : 01no v belt with fitting : 02nos oil can : 01no ½” capacity drill chuck : 01no allen key set : 01no drift key : 01no mt 2 arbour : 01no mt 2 / 3 drill sleeve : 01no rubber pad for foundation : 04no each / no 1 4 heavy duty drilling machine heavy duty drilling machine: with complete accessories pillar drilling machines 25mm cap / 8 speed / 152mm travel with fine feed – square model accessories included with machine : 1 hp 1440 rpm 3 phase electric motor : 1 no. r / f switch, v belt & fitting : 1 no. 1⁄2” drill chuck : 1 no. foundation rubber pad : 4 nos. 4” drill vice : 1 no. oil – can : 1 no. allen key set : 1 no. spanner set : 1 no. mt 2 arbour : 1 no. 2 / 3 sleeves : 1 no. drill bit 12 mm : 1 no. each / no 1 5 high speed lathe high speed lathe: with complete accessories high precision light duty lathe machine with all standard accessories such as chuck plate, gear set, center adaptor, dead center, square tool post, tool post key with hardened bed. specifications: length of bed : 4 1⁄2’ height of centre : 165 mm. width of bed. : 238 mm. spindle hollow : 40 mm. admit between centres’s. : 650 mm accessories for the lathe machine 1. 1hp motor : 1 no 2. r / f switch v belt and fittings : 1 no each / no 1 6 surface grinding machine surface grinding machine with complete accessories size 7” x 14”, oil type surface grinder machine complete with 1 hp. electric motor, 6” x 12” magnetic chuck, starter, wheel balancer, one diamond dresser each / no 1 7 power saw power saw : ( rolex 10 cap hilton ) each / no 1 8 rack driven planning machine rack driven planning machine: with complete accessories each / no 1 9 shaping machine shaping machine : with complete accessories ( 24” / 18” stroke ) shaping machine 12” stroke heavy duty cone pulley type shaping machine fitted with motor pulley, handle, ram back accessories included with the above machine: 1 hp 1440 rpm 3 phase electric motor : 1 no. 0.5 hp 1440 rpm 3 phase electric motor : 1 no starter, v belt & fitting : 2 no. shaping m / c vice : 1 no. oil lubrication system : 1 no. foundation rubber pad : 8 nos each / no 1 10 belt driven slotting machine belt driven slotting machine: with complete accessories each / no 1 31.elements of mechanical engineering 1 cut sectional working model of 2 stroke petrol engine 2 stroke, single cylinder petrol engine test rig with mechanical loading air cooled. description • engine : bajaj • horse power : 1.5 hp. • rated speed : 900 rpm with gear ratio • cooling : air cooled • loading : by rope brake drum with 2 spring balances. • starting : kick start • speed measurement : by digital rpm indicator with proximity sensor • air flow measurement : by air box , orifice with transparent acrylic manometer • fuel measurement : by pipette and stop clock • temperature measurement : by digital temperature indicator with eight way channel selector • engine frame : mounted on anti vibration mounts. • instrumentation : mounted on separate control panel. • calorimeter type ( optional ) : shell and tube type each / no 1 2 cut sectional working model of 4 stroke petrol engine 4 stroke, single cylinder, petrol engine test rig panel a well designed and supported by a good quality painted rigid m.s. structure consists of • speed measurement : by digital rpm indicator with proximity sensor • water flow measurement : by water meter. • air flow measurement : by orifice in air box & transparent acrylic manometer air tank fitted with orifice and water manometer • fuel measurement : by fuel pipette & stop clock fuel measuring system consists of a fuel tank, a burette and a three way cock. • temperature measurement : by digital temperature indicator with eight way channel selector • engine frame : mounted on anti vibration mounts • instrumentation : mounted on separate control panel. • exhaust gas calorimeter : shell and tube type ( optional ) each / no 1 3 francis turbine model description • rotor : 150 mm diameter, 8 blades, gun metal. / c.i • volute casing : c.i. • guide vanes : 8 nos, with mechanism to change vane angle. • loading : alternator, 2 3 kva, standard make ( lamp loading, 10 nos, 200 w ) . • operating head : 10 15 m. • monoblock pump : standard make, 7.5 hp. • discharge measurement : 4 inch, coated m.s • tanks ( s.s ) : sump tank 880 ltrs. capacity • starter : standard make. • digital speed indicator : with proximity sensor for rpm measurement. • pressure gauge : 2 nos. • vaccum gauge : 1no., 0 760 mm of hg • energy meter : for output measurement, standard make. • controlling valves : 4 inch, butterfly valve. • supply : 3 ph, 440 v, 32 amps to be provided by user. • separate control panel : wooden sheet & square tubes. all these are mounted on sturdy frame of m.s. channel & angle. experimental capabilities • to obtain constant head and constant speed characteristics. • to obtain run away speed and unit head –unit quantities. note: specifications are subjected to change without prior information due to continuous design and development. each / no 1 4 pelton wheel turbine model description • rotor : 250 mm diameter, 20 cups, aluminium • output : 1.5 hp at 1000rpm • sphere valve assembly : s.s, 20 mm jet. • loading : rope brake drum, 350 mm diameter. spring balance of 0 10 kg. • operating head : 30 50 m • monoblock pump : 5 hp, two stage standard make. • tanks ( s.s ) : sump tank 250 ltrs. capacity • starter : standard make with indicator. • digital speed indicator : with proximity sensor, for rpm measurement. • pressure gauge : 2 nos. • discharge measurement : 2” venturimeter, coated m.s • controlling valves : 1 no, wheel valve • supply : 3 ph, 440 v, 32 amps to be provided by user. • separate control panel : wooden sheet & square tubes all these are mounted on sturdy frame of m.s. channel & angle. experimental capabilities • to evaluate the constant speed and constant head characteristics and also to plot unit quantities. note: specifications are subjected to change without prior information due to continuous design and development. each / no 1 5 kaplan turbine modeldescription • rotor : 150 mm diameter, 4 blades, gun metal / c.i. with angle changing mechanism. • out put : 1.5 hp @ 900 rpm. • volute casing : c.i. • loading : alternator, standard make, 2 3 kva, ( lamp loading, 10 nos, 200 w ) . • operating head : 5 10 m. • monoblock pump : standard make, 10 hp. • tanks ( s.s ) : sump tank – 880 ltrs. capacity • starter : standard make with mcb, console switch and red indicator. • digital speed indicator : with proximity sensor for rpm measurement. • energy meter : for out put measurement, standard make. • discharge measurement : venturimeter or bend meter, s.s. • pressure gauge : 2 nos. • vacuum gauge : 1 no. 0 760 mm of hg • controlling valves : 6 inch, butterfly valve. • supply : 3 ph, 440 v, 32 amps to be provided by user. • separate control panel : wooden sheet & square tubes. all these are mounted on sturdy frame of m.s. channel & angle. experimental capabilities • to obtain constant head and constant speed characteristics. • to obtain run away speed and unit head –unit quantities. note: specifications are subjected to change without prior information due to continuous design and development. each / no 1 6 centrifugal pump actual cut section each / no 1 7 vapor compression refrigeration system demo model each / no 1 8 vapor absorption refrigeration system demo model each / no 1 9 gear box demonstration model each / no 1 10 demo model of open and cross belt drives each / no 1 11 robot joints and links ( demo purpose ) each / no 1 12 air conditioning system ( demo model ) each / no 1 32.data structures lab equipments 1 desktop computer inspiron 24 5000 all in one desktop: 11th generation intel® core™ i3 1115g4 processor ( 6mb cache, up to 4.1 ghz ) , windows 10 home, english, intel® uhd graphics with shared graphics memory, 8gb, 8gbx1, ddr4, 2666mhz, 1tb 7200 rpm 2.5 sata hard drive, monitor 23.8 inch fhd ( 1920 x 1080 ) anti glare narrow border infinity non touch display, a frame stand, km636 wireless keyboard & mouse white, white fhd ir camera, intel® wi fi 6 2x2 ( gig+ ) and bluetooth 5.1, 90 watt ac adapter, power cord ( india ) each / no 1 2 operating system windows 7, 8, 8.1, 10, 11 pro each / no 1 3 software 1. eclipse: eclipse ide for c / c++ 2. turbo c: turbo c++ or c for windows 7, 8, 8.1 and 10 32 / 64 bit full screen 3. dev: dev c++ 4. codeblocks each / no 1 4 projector mativeresolution:xga 1024 x 768 brightness:3700 lumes lamp life: upto 10, 000hrs contrast ratio:16, 000:1 video compataibility:ntsc, pal hdmi:720p, 576p, 576i, 480p, 480i, 1080i, 1080p audio:audio out connector support with 16w audio output zoom focus:manual display input:vgax2 , hdmi x 2 , usb, composit av , mhl, wifi aspect ratio:4:3 and 16:9 remote :full function connectivity hdmi / vga, mhl, wifi . each / no 1 5 antivirus software: mcfee software epo ( 40 user ) each / no 1 6 projector screens good quality each / no 1 7 printers : hp laserjet printers a4 size hp laserjet configuration black and white, print, copy, scan , 1 hi speed usb 2.0 , laser, a4 black and white laser, multifunction printer, perfect for enterprise, print, copy and scan, print speed up to 21 ppm ( black ) preinstalled introductory hp laserjet black cartridge ( ~700 pages ) installation guide, getting started guide, users guide, support flyer, warranty guide printer software and documentation on cd power cord , usb cable each / no 1 8 ups and batteries 10 kva – ups 10 kva ups • type: online single phase input & single phase output • capacity : 10kva • backup time: 4 hours or higher • input frequency: 50hz.+ / 5% • input voltage : 160v 270v • output voltage:230v+ / 1%v • output frequency : 50hz+ / 0.2hz. • input power factor: >0.9 • output power factor: 0.8 lag to unity • pf waveform: pure sine wave • alarm: on battery, low battery, ups over load • no. of batteries: compatible • dc voltage ( input ) :compatible • overload capacity : 150% for 1minute , 125% for 10minutes • inverter efficiency : 90% • overall efficiency: 90% • crest factor: 3:01 • regulation: + / 1% • switching frequency : above 20khz • technology: igbt based pwm technology with isolation transformer • warranty : 3 years onsite comprehensive including batteries • protection: automatic discharge protection with self test features, overload surge protection , input fault, cold start, low battery , battery over charge, output short circuit, charging current circuit, inverter over temperature • lcd display : output voltage, output current, load%, output frequency, input voltage, battery voltage • load test: at 100% load on resistive load thd: <3% for linear, <5% for non linear • certification: iso 9001:2008 or higher, etdc / cpri test report &bis certification each / no 1 9 batteries rack capacity of 20 to 25 batteries each / no 1 10 laptop computer : 7th genration core i5 / i7, 8 gb ram, itb hod, 2gb graphics, 23.8 fhd windows 10 all in one desktop pc with wifi enabled each / no 1 33.computer aided machine drawing lab equipments 1 desktop computer inspiron 24 5000 all in one desktop: 11th generation intel® core™ i3 1115g4 processor ( 6mb cache, up to 4.1 ghz ) , windows 10 home, english, intel® uhd graphics with shared graphics memory, 8gb, 8gbx1, ddr4, 2666mhz, 1tb 7200 rpm 2.5 sata hard drive, monitor 23.8 inch fhd ( 1920 x 1080 ) anti glare narrow border infinity non touch display, a frame stand, km636 wireless keyboard & mouse white, white fhd ir camera, intel® wi fi 6 2x2 ( gig+ ) and bluetooth 5.1, 90 watt ac adapter, power cord ( india ) each / no 1 2 operating system windows 7, 8, 8.1, 10, 11 pro each / no 1 3 software solid edge software latest version ( 60 user license ) each / no 1 4 projector mativeresolution:xga 1024 x 768 brightness:3700 lumes lamp life: upto 10, 000hrs contrast ratio:16, 000:1 video compataibility:ntsc, pal hdmi:720p, 576p, 576i, 480p, 480i, 1080i, 1080p audio:audio out connector support with 16w audio output zoom focus:manual display input:vgax2 , hdmi x 2 , usb, composit av , mhl, wifi aspect ratio:4:3 and 16:9 remote :full function connectivity hdmi / vga, mhl, wifi each / no 1 5 antivirus software: mcfee software epo ( 40 user ) each / no 1 6 projector screens good quality each / no 1 7 printers : hp laserjet printers a4 size hp laserjet configuration black and white, print, copy, scan , 1 hi speed usb 2.0 , laser, a4 black and white laser, multifunction printer, perfect for enterprise, print, copy and scan, print speed up to 21 ppm ( black ) preinstalled introductory hp laserjet black cartridge ( ~700 pages ) installation guide, getting started guide, users guide, support flyer, warranty guide printer software and documentation on cd power cord , usb cable each / no 1 8 ups and batteries 10 kva – ups10 kva ups • type: online single phase input & single phase output • capacity : 10kva • backup time: 4 hours or higher • input frequency: 50hz.+ / 5% • input voltage : 160v 270v • output voltage:230v+ / 1%v • output frequency : 50hz+ / 0.2hz. • input power factor: >0.9 • output power factor: 0.8 lag to unity • pf waveform: pure sine wave • alarm: on battery, low battery, ups over load • no. of batteries: compatible • dc voltage ( input ) :compatible • overload capacity : 150% for 1minute , 125% for 10minutes • inverter efficiency : 90% • overall efficiency: 90% • crest factor: 3:01 • regulation: + / 1% • switching frequency : above 20khz • technology: igbt based pwm technology with isolation transformer • warranty : 3 years onsite comprehensive including batteries • protection: automatic discharge protection with self test features, overload surge protection , input fault, cold start, low battery , battery over charge, output short circuit, charging current circuit, inverter over temperature • lcd display : output voltage, output current, load%, output frequency, input voltage, battery voltage • load test: at 100% load on resistive load thd: <3% for linear, <5% for non linear • certification: iso 9001:2008 or higher, etdc / cpri test report &bis certification each / no 1 9 batteries rack capaeis of 20 to 25 batteries each / no 1 10 laptop computer : 7th genration core i5 / i7, 8 gb ram, itb hod, 2gb graphics, 23.8 fhd windows 10 all in one desktop pc with wifi enabled each / no 1 e & c departments each / no 1 1 regulated power supply dc regulated power supply with short circuit & overload protection 0 30 / 2a single out put with two digital meters. ar ps 302d dc regulated power supply with short circuit & over load protection 0 30v / 2a dual output with two digital meters each / no 1 2 bread board bread board with terminals mounted on plate each / no 1 3 decade boxes plastic switches decade resistance box with 6 dials ( 1 ohms to 1 m ohms ) each / no 1 4 decade capacitance box with 6 dials ( 10pfd to 100pfd, 100pfd to 0.001ufd, 0.001ufd to 0.01ufd to 0.1ufd, .1ufd to 1ufd, 1ufd to 10ufd ) each / no 1 5 decade inductance box with 6 dials ( 10uh to 100uh, 100uh to 1mh, 1mh to 10mh, 10mh to100mh, 100h to 1h, 1h to 10h ) each / no 1 6 lcr meters handheld lcr meter each / no 1 7 signal enerator generator 0.2hz to 2mhz microcontroller based signal generator with lcd display for frequency & amplitude read out int / ext ( ext upto 3mhz counter ) sine / square / triangle and puse with variable duty cycle amplitude 2mv 20vpp with 40db attenuation. each / no 1 8 digital storage oscilloscope 100mhz digital storage oscilloscope features: signal bandwidth : 100 mhz real time sampling:max 1 gsa / s equivalent sampling rate: max 50 gsa / s 7.0 tft lcd color display 2 mpts memory depth each / no 1 9 desk top digital meters ac voltmeter single range each / no 1 10 dc voltmeter single range each / no 1 11 ac ammeter single range each / no 1 12 dc ammeter single range each / no 1 13 digital storage oscilloscope 100mhz digital storage oscilloscope features: signal bandwidth : 100 mhz real time sampling:max 1 gsa / s equivalent sampling rate: max 50 gsa / s 7.0 tft lcd color display 2 mpts memory depth each / no 1 14 scr kit a ) variable dc power supply 3v to 30v @ 500ma to vary vak b ) variable dc power supply 1.5v to 15v @ 100ma to vary ig c ) 10watts fixed resistor rg for gate current d ) 50watts variable resistance for load current variation e ) 2 scr’s of different ratings to find different holding and latching current f ) digital dc milliammeter for gate current ig g ) digital dc ammeter for load current il. h ) digital dc voltmeter for vak i ) 230v ac mains operated j ) unit enclosed in a powder coated ms box with screen printed polycarbonate panel each / no 1 15 scr controlled hwr and fwr using rc triggering circuit kit a ) 20v @ 0.5a ac supply b ) 10a / 600v scr with heat sink and snubber circuit c ) potentiometer, fixed resistor, capacitor and associated components to build r and r c triggering circuit d ) single phase diode bridge rectifier for full wave controlled rectifier e ) 25 watts resistive load f ) 230v ac mains operated g ) unit enclosed in a powder coated ms box with screen printed polycarbonate panel. each / no 1 16 measurement of resistance using wheatstone and kelvin’s bridge kitw heatstone bridge a ) dc power supply – 5v@1a b ) mr 100 sensitive galvanometer c ) the series arm consists of 10x1, 10x10, 10x100, 10x1000 ohms d ) the ratio arm consists of rotary switch of 7 multiplying factors of 0.001, 0.01, 0.1, 1, 10, 100 and 1000. e ) 230v ac mains operated kelvins double bridge: a ) dc power supply 5v@2a b ) mr 100 sensitive galvanometer c ) the double ratio arm consists of rotary switch of 5 multiplying factors of 0.01, 0.1, 1, 10 and 100 d ) 10 coils of 0.1 ohm resistors connected in a rotary switch in series with circular slide wire of 100 divisions to vary r e ) terminals are connect 4 terminal unknown resistor f ) 230v ac mains operated each / no 1 17 characteristics of ldr & photo diode and turned on an led using ldr a ) variable dc power supply – 1.5v to 12v @ 250ma b ) digital dc voltmeter c ) digital dc milliammeter d ) ldr, photo diode, led, resistors and setup to vary the distance from ldr to lamp to vary light intensity on ldr e ) 230v ac mains operated each / no 1 18 measure temperature in terms of current / voltage using a temperature sensor bridge a ) temperature sensor –rtd ( pt 100 ) fitted on a heating element with thermometer for temperature measurement b ) digital voltmeter to measure temperature in terms of voltage c ) digital milli ammeter to measure temperature in terms of ma d ) temperature sensor bridge with associated components e ) 230v ac mains operated each / no 1 19 cro probes each / no 1 20 digital ic trainers with built in power supply digital ic trainer with built in power supply 10 logical i / p switches 10 logical o / p indicators 20 pin zif socket 5 os.bcd to seven segment display 2 nos. mono pulse generator frequency generator 1hz to 1mhz. bread oard 1 no. ( 165 x 50mm ) power supply + / 5v, + / 15v 4mm rminals with high quality patch cords. each / no 1 21 patch cord 4 mm each / no 1 22 ic tester minmax make microprocessor based analog & digital ic tester for testing analog ics upto 20 pins and digital ics upto 40 pins with 24 keys keyboard and 16 x 2 lcd alphanumeric display. model mme adit 40. each / no 1 23 microcontroll er kit on chip 64kb flash program memory.  1792 bytes expanded ram ( xram ) .  2048 bytes eerom.  spi interface.  16 bit programmable counter array for compare, capture, pwm.  three programmable timer / counters.  two external interrupts  one 26 pin frc to connect to some als standard nifc interfaces  the atmel at89c51ed2 8 bit micro controller with operating frequency of 11.0592mhz with an external crystal and supply voltage of +5v.  four 10 pin frc connectors connected to port 0 to port 3 of controller  a 9 pin d type female connector used for rs232 serial i / o interface for uart experiments and also for flash programming. serial interface through usb is also provided onboard each / no 1 24  a 9 pin d type male connector meant for power connection ( +5v and gnd ) .  a push button switch for reset and a slide switch to select either program mode or run mode.  a push button switch for external interrupt / int0 or / int1.  alphanumeric 16x2 lcd display.  two numbers of leds provided for general purpose.  16 switches organized as 4 rows x 4 columns.  8 bit dac interface  rtc interface  one adc ( adc0809 ) with a potentiometer to vary analog input & temperature sensor ic lm335  four level elevator simulator interface.  traffic light simulator interface  on board stepper motor and dc motor control interface. stepper motor and dc motor is supplied with evaluation board.  four digit multiplexed 7 segment display interface.  elegant enclosure with test points for monitoring each / no 1 25 bread board bread board with terminals mounted on plate each / no 1 26 microcontrol ler based signal generator 0.2hz to 2mhz microcontroller based signal generator with lcd display for frequency & amplitude read out int / ext ( ext upto 3mhz counter ) sine / square / triangle and puse with variable duty cycle amplitude 2mv 20vpp with 40db attenuation each / no 1 27 digital storage oscilloscope 100mhz digital storage oscilloscope features: signal bandwidth : 100 mhz real time sampling:max 1 gsa / s equivalent sampling rate: max 50 gsa / s 7.0 tft lcd color display each / no 1 28 variable power supply dc regulated power supply with short circuit & over load protection 0 30v / 2a dual output with two digital meters. each / no 1 29 linear ic tester microprocessor based analog & digital ic tester for testing analog ics upto 20 pins and digital ics upto 40 pins with 24 keys keyboard and 16 x 2 lcd alphanumeric display. model mme adit 40 each / no 1 30 lcr meters handheld lcr meter each / no 1 31 decade boxes plastic switches decade resistance box with 6 dials ( 1 ohms to 1 m ohms ) each / no 1 32 decade capacitance box with 6 dials ( 10pfd to 100pfd, 100pfd to 0.001ufd, 0.001ufd to 0.01ufd to 0.1ufd, .1ufd to 1ufd, 1ufd to 10ufd ) each / no 1 33 decade inductance box with 6 dials ( 10uh to 100uh, 100uh to 1mh, 1mh to 10mh, 10mh to100mh, 100h to 1h, 1h to 10h ) each / no 1 34 digital multimeter 3 ½ digit digital multimeter each / no 1 35 linear ic trainers 16 pin zif sockets 2 nos. built in function generator 1hz to 100khz sine wave with variable amplitude & square wave. built in power supply ( +5v 1a, + / 15v 200ma, 0 to + / 15v 350ma, 24v, 200ma ) with metal box enclosure. variable input source 0 to + / 12v, 0 to + / 1.2v. 4mm sockets with patch cords. bread board ( 165 x 50mm ) 1no. potentiometers 3 nos. a / c source 6 0 6 regulators 7805, 7905, lm317 extra 20 terminals. 20 patch chords each / no 1 36 dsp starter kit tms320c6748 with emulator the tms320c6748 dsp development kit ( lcdk ) is a scalable platform that breaks down development barriers for applications that require embedded analytics and real time signal processing, including biometric analytics, communications and audio. the low cost lcdk will also speed and ease your hardware development of real time dsp applications. hardware features processor  ti tms320c6748 dsp application processor  456 mhz c674x fixed / floating point dsp  on chip rtc memory  128m byte ddr2 sdram running at 150mhz  128 m byte 16 bit wide nand flash  1 micro sd / mmc slot interfaces  one mini usb serial port ( on board serial to usb )  one fast ethernet port ( 10 / 100 mbps ) with status leds  one usb host port ( usb 1.1 )  one mini usb otg port ( usb 2.0 )  one sata port ( 3gbps )  one vga port ( 15 pin d sub )  one lcd port ( beagleboard xm connectros )  one composite video input ( rca jack )  one leoprd imaging camera sensor input ( 36 pin zip connector )  three audio ports ( 1 line in & 1 line out & 1 mic in )  14 pin j tag header ( no onboard emulator, external emulator is required ) kit contents  c6748 lcdk kit  power adaptor  xds 100 / 110 jtag emulator  usb cable  user manual  code composer studio ( e download ) each / no 1 37 fpga trainer kit 32 inputs using 8 way four dip switches. each input of these switches has an led indication. 32 outputs through output ports of fpga connected to leds. 16x2 alpha–numeric lcd display with back light through 10 pin frc connectors to fpga / cpld port pins. six digit 7 segment displays connected through 10 pin frc connector to fpga / cpld port pin. 4x4 key matrix. 10 mhz, 5 mhz, 1mhz, 500 khz, 100 khz five different clock frequencies. on board relay connected using 10 pin frc to fpga / cpld port pins. on board traffic light simulator connected to fpga / cpld port pins using 16 pin frc. on board adc connected to fpga / cpld port pins using 16 pin frc. on board dac is provided to generate different waveforms and it is connected to fpga / cpld port pins using 16 pin frc. on board four level elevator connected to fpga / cpld port pins using 16 pin frc. two pin reliamate is provided on the board to connect external dc motor and it is connected to fpga / cpld port pins using 10 pin frc. 5 way powermate is provided to connect external stepper motor and it is connected to fpga / cpld port pins using 10 pin frc. 26 pin frc header with cable for connecting to als standard interfaces. 8 inputs using 0ne dip switches. each input of these switches has an led indication. one push button four sets of 20x2 female berg connector to plug the daughter board. programs can be downloaded from the pc to the fpga / cpld on the daughter board using programming tool. each / no 1 38 daughter board 6 xlinix xc6slx4tq144: spartan6 fpga platform flash in system programmable configuration prom: xcf04svo20 16 pin frc connector to select between base board toggle switch and the 26 pin frc external interface. jtag connector ( 10 pin frc connector ) for boundary scan programming. push button switch to re initialize the fpga and done led for program status indication power from the bottom board. four sets of 20 x 2 berg connectors for plugging on to the base board. each / no 1 39 bit pattern logic analyzer cpld 32 bit pattern generator and logic analyzer each / no 1 40 power supply ( 5v, 1.5a, + / 12v, 100ma ) each / no 1 41 lpc1768 is arm cortex m3 based micro controller with  512kb flash memory and 64kb sram in system programming ( isp ) and in application programming ( iap ) capabilities.  single 3.3 v power supply ( 2.4 v to 3.6 v ) .  70 general purpose i / o ( gpio ) pins with configurable pull up / down resistors, open drain mode, and repeater mode.  standard jtag test / debug interface as well as serial wire debug.  12mhz crystal allows easy communication setup  one on board voltage regulator for generating 3.3v. input to this will be from external +5v dc power supply through a 9 pin dsub connector  piggy back module containing lpc1768 controller  standard jtag connector with arm 2×10 pin layout for programming / debugging with arm jtag  reset push button for resetting the controller  one rs232 interface circuit with 9 pin dsub connector: this is used by the boot loader program, to program lpc1768 flash memory without external programmer. application program can also use this uart for serial communication  dc motor interface with direction and speed control  stepper motor interface with direction and speed control  16×2 alphanumeric lcd display  on chip adc interface circuit with pot  8 bit dac interface  4x4 key matrix connected to the port lines of the controller  one external interrupt circuit with led indication  two digit multiplexed 7 segment display interface  interface circuit for on board buzzer, relay and led indication controlled through push button.  spi interface: 2 channel adc ic with pot and temperature sensor  i2c interface: nvrom ic  internal pwm terminated in test point and led  standard 26 pin frc connectors to connect to on board interface. a number of software examples in ‘c language’ to illustrate the functioning of the interfaces. the software examples are compiled using an evaluation version of keil4 ‘c’ compiler for arm. each / no 1 42 ( 5v, 1.5a, + / 12v, 100ma ) each / no 1 43 frequency modulation and demodulation trainer kit  af generator – generates low frequency signals of 500 hz and 5 khz to use as a modulating signal.  regulated power supply – on board power supply provide +15v, 15v, +5v, 5v and current rating 150ma each.  modulation – frequency modulation using xr 2206 with frequency of operation can be selected externally over a range of 0.01hz to more than 1mhz.  demodulation – frequency demodulation using general purpose pll lm565. each / no 1 44 amplitude modulation and demodulation trainer kit  rf generator – colpitts oscillator generates, 1 mhz frequency to use as carrier signal  af generator – low frequency signal 2 khz is generated and used as the modulation signal  power supply – on board power supply provide +12v, 12v and current rating 150ma each  modulation – amplitude modulation using bc107 transistor ( npn )  demodulation – envelop detector using diode oa79. each / no 1 45 analog sampling and reconstruction trainer kit  onboard input sinusoidal signal: 2 khz.  sampling freq: 2 khz, 4 khz, 8 khz, 16 khz, 32 khz ( selectable )  variable duty cycle: 10% to 90% cut off freq: 3.4 khz.  outputs: sampling amplifier & sample hold amplifier  reconstruction: 2nd, 4th & 6th order butter worth lpf each / no 1 46 time division multiplexing and demultiplexin g trainer kit ( tdm ) with power supply  input sine waves: 2khz, 1khz, 500hz, 250 hz  synchronization pulse generation: using ( variable 0 5v ) dc level  generation of receiver clock and channel information using pll  communication through three, two and single wire modes  sampling rate: 32 khz  reconstruction: 4 order low pass butter worth filter cut off freq: 3.4 khz,  clock recovery & sync detect 2 of the fundamentals aspects using pll techniques each / no 1 47 psk / dpsk modulation and demodulation kit with power supply  data bits:8 bit rz variable data with sliding switch selection  carrier: on board 8 khz / 5v amplitude with 0 degree and 180 degree phase sine wave.  psk modulator: using ic cd4051 ( multiplexer )  psk demodulator: carrier phase comparison  differential encoder / decoder using ex or and ex nor logic  dpsk modulator: using ic cd4051 ( multiplexer ) dpsk demodulator: carrier phase modulation each / no 1 48 ask / fsk modulation and demodulation kit with power supply  data bits: variable data using sliding switch  carrier :onboard variable frequency and amplitude sine wave  bask modulator: using cd4066 ( bilateral switch  ask demodulator: using ic tl084 with low pass filter  we can see outputs in various test points  bfsk modulator: variable carrier frequency modulation  bfsk demodulator: using pll method for demodulation also we can see outputs in various test points each / no 1 49 measurement of frequency, guide wavelength, power , vswr and attenuation in microwave test bench klystron power supply  klystron mount with klystron tube  variable attenuator  frequency meter  slotted section  tunable probe  detector mount  isolator  waveguide stand ( 02 nos. )  bnc bnc cables ( 02 nos. )  cooling fan each / no 1 50 obtain the radiation pattern and measurement of directivity and fain of micro strip dipole and yagi antenna ( 1set )  yagi antenna  dipole antenna  antenna tripod stands ( transmitter and receiver )  microwave detector ( dc 3ghz )  signal generator 2.0 – 3.0ghz  vswr meter  coaxial matched loads – 50 ohms 03 nos.  short  adapter n ( m ) to sma ( f )  adapter sma ( f ) to sma ( f )  adapter sma ( m ) to sma ( m )  rf cable 1m length bnc cable each / no 1 51 determination of a ) coupling and isolation characteristics of microstrip directional coupler b ) resonance characteristics of microstrip ring resonator and computation of dielectric constant of the substrate c ) power division and isolation of microstrip power divider ( 1set )  ring resonator  power divider  branch line directional coupler  parallel coupled directional coupler  stripline directional coupler  microwave detector ( dc 3ghz )  signal generator 2.0 – 3.0ghz  vswr meter  coaxial matched loads – 50 ohms 03 nos.  short  attenuator pad 3db  attenuator pad 6db  attenuator pad 10db coaxial  adapter n ( m ) to sma ( f ) 02 nos.  adapter sma ( f ) to sma ( f ) 02 nos  adapter sma ( m ) to sma ( m )  bnc cable each / no 1 52 basic project lab tools & instruments soldering gun each / no 1 53 de soldering pump each / no 1 54 antistatic mat for 2” x 3” each / no 1 55 nose plair each / no 1 56 cutting plair each / no 1 57 sleeve remover each / no 1 58 digital multimeter 3 ½ digit each / no 1 59 bread board each / no 1 60 single stand wire ( 10mtr each / no 1 61 crocodile clip with patch cord each / no 1 62 solder lead each / no 1 63 dc regulated power supply with short circuit & over load protection 0 30v / 2a dual output with two digital meters each / no 1 64 hand held lcr meter each / no 1 65 mini projects assembled & tested a ) als stuprj1 smoke alarm b ) als stuprj2 heat alarm c ) als stuprj3 metal detector d ) als stuprj4 touch alarm e ) als stuprj8 light operated relay each / no 1 66 mini projects assembled & tested includes the following f ) als stuprj9 light dimmer g ) als stuprj10 water level controller h ) als stuprj11 door bell / moisture sensor i ) als stuprj13 police siren jals stuprj14 linear power supply each / no 1 67 adaptor each / no 1 68 project boards for embedded segment controller boards als pjt89c51ed2 ed2 project with proto board each / no 1 69 als pjt arm2148 arm project board with proto board each / no 1 70 als pjt fpga 01 fpga 3s400 project board with proto board each / no 1 71 als pjtbrd armctxm3 01 arm cortex m3 project board with proto board each / no 1 72 als pjt proto 01 proto board ( additional ) each / no 1 73 evaluation boards for study a ) als sda emb eval 03 embedded controller kit b ) power supply ( 5v, 1.5a, + / 12v, 100ma ) each / no 1 74 mini projects controller based als prj / proto / 01 relay project board als prj / proto / 02 nvrom project board als prj / proto / 03 spi adc project board each / no 1 75 als prj / proto / 01 relay project board als prj / proto / 02 nvrom project board als prj / proto / 03 spi adc project board each / no 1...

Directorate Of Employment And Training - Karnataka

32144182 bids are invited for supply of tools and equipments 1 anvil 2 anvil with stand 3 bench vice 4 blow lamp 5 caliper spring joint in side 6 caliper, odd leg, spring joint 7 calliper inside with spring 8 callipers outside with springc 9 center punch. 10 centre punch 11 centre punch 12 chisel cold crosscut& diamond point. 13 chisel cold flat 14 chisel cold flat 15 chisel cold round nose 16 chisel flat 17 circlip pliers expanding andcontracting 18 cold chisel flat and cross cut 19 crimping tool 20 d.e spanner 21 depth micrometer 22 dial gauge type 1 gr. a ( complete with clamping devices and withmagnetic stand ) 23 divider spring joint24 dividers with spring 25 dowel pin ( straight ) 26 drift punch copper 27 drill gauges 28 drill twist ( various sizes ) 29 drill twist straight shank 30 drill twist taper shank 31 file card. 32 file flat bastard 33 file flat second cut 34 file flat bastard 35 file flat fine double cut 36 file flat rough double cut 37 file flat smooth 38 file half round bastard 39 file half round fine double cut 40 file half round second cut 41 file half round second cut 42 file half round second cut 43 file hand second cut 44 file round bastard. 45 file round fine double cut 46 file round second cut 47 file square fine double cut 48 file square second cut 49 file square second cut50 file swiss type needle 51 file triangular , second cut 52 file triangular fine double cut 53 flat file bastard 54 flat file second cut 55 grease gun 56 hacksaw frame 57 hacksaw frame fixed type 58 hammer ball pane 59 hammer ball peen with handle 60 hammer ball peen with handle 61 hammer ball peen with handle. 62 hammer chipping 63 hammer copper with handle 64 hammer mallet 65 hammer plastic 66 hand operated crimpingtool / wire 67 hand vice 68 hollow punch set of seven pieces 69 insulated screw driver 70 insulated screw driver 71 machine vice swivel base 72 machine vice swivel base 73 machine vice. 74 oil can 75 pliers combination76 pliers combination insulated 77 pliers flat nose 78 pliers long nose 79 pliers round nose 80 pliers side cutting 81 portable electric drill machine ( bosch ) 82 pulley extractor 83 pulleys ( for v belt or flat belt ) 84 punch letter 85 punching tool 86 ring spanner 87 scraper triangular 88 scriber 89 scriber with scribing black 90 set of stock and dies metric 91 sleeve drill morse 92 slip on forged steel flange 93 snip bent left cut 94 snip sheet metal curved nose 95 spanner d.e. set of 12 pieces 96 spanner t. flocks for screwing up and up screwing inaccessible 97 spanner, adjustable 98 spanners socket with speed handle, t bar, ratchet and universal set of 28 pieces with box99 spark plug spanner 14mm x18mm x size 100 spring tension tester 101 standard tap screws 102 steel measuring tape in a case 103 steel rule 104 steel rule with metric & british graduation 105 stud extractor set of 3 106 tachometer ( counting type ) 107 tape measuring 108 temperature controlled soldering iron 109 temperature gauge 110 try square 111 tweezers 112 v’ block 113 vacuum gauge 114 valve lifter 115 v belt and flat belt 116 vernier caliper 117 vernier calliper 118 vice grip pliers 119 washer, clutch, keys, jib, cotter &circlip 120 welder cable 121 welding goggles 122 welding helmet with coloured flame 123 wire cutter and stripper 124 wire gauge ( metric ) ...

Visvesvaraya Technological University - Karnataka

31928278 tender for procurement of equipment, tools and consumables for atal idea lab at vtu pg centre, muddenahalli under aicte grants tender for procurement of equipment, tools and consumables for atal idea lab at vtu pg centre, muddenahalli under aicte grants , laser cutter, vinyl cutter, 3d scanner ( handheld ) , cnc router, mini desktop lathe cum milling ( 1 desktop lathe cum milling ) , drilling machine 1 hp motor, handheld high speed drilling machine 15000 rpm with accessories, bench grinding machine, advanced motorized sewing machine, wood lathe, power circular saw, hand held scroll saw, hand held flexible dremel tool set, portable welding machine ( mig tig and arc welding ) , de soldering machine, refrigerator, normal and microwave oven, magnifying glass with stand, digital microscope, mixed signals oscilloscope, digital storage oscilloscope, heavy duty laser printer with xerox, manual pcb drilling machine, computer workstation in networking, quadcopter assembly kit, pcb prototyping equipment, soldering stations, dso, mso, benchtop power supply units, lcr bridge, dmm ( handheld ) , pcb fabrication tools, signal / function generator, benchtop multimeter, coil winding machine motorized, ham radio transceiver, antenna and related equipment with relevant software, vacuum cleaner, hot air gun, t shirt, mug and laptop bag printing machine, 3d printing ( small 01 ) , 3d printing ( big 02 ) , camera dslr, measuring equipment, fire extinguisher, first aid box, digital multimeter, cloths iron, electric components repository ( lcr meter, variac etc ) , 3d printer filament ( 5 rolls ) , acrylic sheets 2mm area 8ft x 4ft, acrylic sheets 3mm area 8ft x 4ft, acrylic sheets 4mm area 8ft x 4ft, foam sheets 10mm area 8ft x 4ft, foam sheets 12mm area 8ft x 4ft, foam sheets 15mm area 8ft x 4ft, ply boards 8mm area 8ft x 4ft, ply boards 10mm area 8ft x 4ft, ply boards 12mm area 8ft x 4ft, ply boards 15mm area 8ft x 4ft, nylon rods ( length 1 m ) 12mm, nylon rods ( length 1 m ) 15mm, nylon rods ( length 1 m ) 18mm, nylon rods ( length 1 m ) 25mm, nuts 3mm, nuts 4mm, nuts 5mm, nuts 6mm, nuts 8mm, nuts 10mm, nuts 12mm, bolts length 1 inch dia. 3mm, bolts length 1 inch dia. 4mm, bolts length 1 inch dia. 5mm, bolts length 1 inch dia. 6mm, bolts length 1 inch dia. 8mm, bolts length 1 inch dia. 10mm, bolts length 1 inch dia. 12mm, bolts length 1.5 inch dia. 3mm, bolts length 1.5 inch dia. 4mm, bolts length 1.5 inch dia. 5mm, bolts length 1.5 inch dia. 6mm, bolts length 1.5 inch dia. 8mm, bolts length 1.5 inch dia. 10mm, bolts length 1.5 inch dia. 12mm, bolts length 2 inch dia. 3mm, bolts length 2 inch dia. 4mm, bolts length 2 inch dia. 5mm, bolts length 2 inch dia. 6mm, bolts length 2 inch dia. 8mm, bolts length 2 inch dia. 10mm, bolts length 2 inch dia. 12mm, bolts length 2.5 inch dia. 3mm, bolts length 2.5 inch dia. 4mm, bolts length 2.5 inch dia. 5mm, bolts length 2.5 inch dia. 6mm, bolts length 2.5 inch dia. 8mm, bolts length 2.5 inch dia. 10mm, bolts length 2.5 inch dia. 12mm, screws 1mm, screws 2mm, screws 3mm, screws 4mm, screws 5mm, washers 3mm, washers 4mm, washers 5mm, washers 6mm, washers 8mm, washers 10mm, washers 12mm, studs ( length 1 m ) 4mm, studs ( length 1 m ) 6mm, studs ( length 1 m ) 8mm, nails 1 inch, nails 2 inch, nails 3 inch, nails 4 inch, adhesives m seal, adhesives feviquick, adhesives fevi bond, 2 way tapes, pvc pipes ( length 10ft ) 0.75 inch, pvc pipes ( length 10ft ) 1 inch, pvc pipes ( length 10ft ) 1.5 inch, pvc pipes ( length 10ft ) 2.5 inch, pvc pipes ( length 10ft ) 3 inch, aluminium channels ( length 12 feet ) l, aluminum channels ( length 12 feet ) c, aluminum channels ( length 12 feet ) box, aluminium channels ( length 12 feet ) strip length, pcb drill bits 0.5mm, pcb drill bits 0.8mm, pcb drill bits 1mm, pcb drill bits 1.2mm, drill bits 3mm, drill bits 4mm, drill bits 5mm, drill bits 6mm, drill bits 8mm, drill bits 10mm, drill bits 12mm, carpentry boring bits ( entire kit ) , electronic active and passive components electronic capacitors, electronic active and passive components electronic resistors, electronic active and passive components electronic diodes, electronic active and passive components electronic transistors, usb cables ( for connecting arduino andother development boards ) , radium cutter knives, glue sticks, hack saw blades 6inch, hack saw blades 12 inch, 9v battery snaps, lan cable ( for connecting raspberry pi ) , connector, stock pcb ( fr4 ) , nuts, bolts and stand offs ( for pcb ) , resistors, capacitors, inductors, relays and coils, magnets, sensors, digital ic, analog ic, power supply and charger ic, led strip, transistor and mofset, diodes and leds, microcontroller ic and boards, batteries and battery holders, soldering wire, sensor set including sensors for home / industry / agriculture automation, medical diagnosis, arduino uno boards, node mcu ( esp8266 ) boards, raspberry pi 4 boards, al for artificial intelligence based applications 5 sets, black wireless ( 5 sets ) , peripheral sets for arduino / node mcu / raspberry pi ( 10 sets ) , esp32 cam development board wi fi+ bluetooth with ov2640 camera module ( 5 sets ) , solnoi electronics raspberry pi 3 camera module night vision camera ( 5 sets ) , aluminium rolls for vinyl cutter, hacksaw, micro chisel set, pliers, cordless drilling machines, jigsaw machines, power circular saw, files set, file handles, needle files, pipe vice, mini hacksaw, ball peen hammer, steel shaft claw hammer, nylon mallet, rubber mallet, allen key set, dremel multitool kit, double ended spanner sets, 12 piece open ended spanner set, scroll saw machine, tool wall covering perforator, dremel moto saw, bench grinding machine, power return measuring tape, tri square 8 inch, stainless steel rule, digital vernier caliper, spirit level, dremel cordless rotary tool, power router, sewing machine, impact drill, ratchet set, router bit starter kit, scroll saw, hot air blower with soldering iron, tin cutter with spring, power handheld drilling machine kit, centrifugal blower, screwdriver sets, cutting mats, micrometer, glue gun, air compressor, tongue and groove pliers, non contact voltage tester, wire stripper, flash tape, flashlights, dc regulated power supply, desoldering wick, filament dehydrator, reflow oven, glass cutter, gypsum ( kgs ) , c clamp, baby vice 60mm, bench vices, anvil, walkie talkie ( 6 pcs ) , laptop...

South Western Railway - Karnataka

31679756 auction sale of [ pl no. 98050126 ] scrap cond. / released / unserviceable ms scrap such as cbc coupler bodies, angels channels, signal rods, dash pot, yokes, draft gears sets, ms sheets, winch for lc gate, lever lock, lever rods, pull rods, suspension tube, bracket cl, housing axle bearing, chequered plates, cbc operating handle, rail cutter, rel hook, anti roll bracket, dradger drum, ms stool, centring disc, ms liners, center pivot washer, brake shoe head, center pivot ring, side frame key, adopter narrow jaw, anti roll bar, rail dolly, fish bolts & nuts, wear plate, adopter wide jaw, suspension rods , equalizing stay, erc clips, wagon doors, rail flange, chain hook, rotary shield with bearings, sab parts, ls beam, hangers, brake levers, brake hangers, ms plates of elastomeric pad, adapter broken, center pivot top, anvil, workdout sab, gib crane, cr reservoir and bracket, plate screws, knuckle, brake cylinder fabricated test rig, gear wheel, anchor link, cash chest, brake beam cut parts, axle box housing, bearing plates, rivette, chirr plate, ms bed plate, ms guage tie plate, structure bar, ms tie plates, slide chaires, ls beam, center pivot, air brake cylinder, knuckle, adopter narrow jaw, tamping tools, track machine parts, brake shoe head, locking plate, long pull rod, operating handle, cbc lock, cbc yoke, lower spring sheet beam, center beams, center pivot washer, screw couplings, lower spring sheet beam, center beams, cut pieces of pipes, buffers, buffer plungers, buffer casings, draw gear hooks, silent blocks, brake cylinder, cut off sheets, collars, iron rods, face plate, bolt & nut stresses, and other items coming under ms scrap on as is where is condition available under the custody of dms 08 ward ap. ( loc:bin no 0124 & 0137at scrap yard...

South Western Railway - Karnataka

31679746 auction sale of [ pl no. 98050126 scrap cond. / released / unserviceable ms scrap such as cbc coupler bodies, angels channels, released bridge items, signal rods, dash pot, yokes, draft gears sets, ms sheets, winch for lc gate, lever lock, lever rods, pull rods, suspension tube, bracket cl, housing axle bearing, chequered plates, cbc operating handle, rail cutter, rel hook, anti roll bracket, dradger drum, ms stool, centring disc, ms liners, center pivot washer, brake shoe head, center pivot ring, side frame key, adopter narrow jaw, anti roll bar, rail dolly, fish bolts & nuts, wear plate, adopter wide jaw, suspension rods , equalizing stay, erc clips, wagon doors, rail flange, chain hook, rotary shield with bearings, sab parts, ls beam, hangers, brake levers, brake hangers, ms plates of elastomeric pad, adapter broken, center pivot top, anvil, workdout sab, gib crane, cr reservoir and bracket, plate screws, knuckle, brake cylinder fabricated test rig, gear wheel, anchor link, cash chest, brake beam cut parts, axle box housing, bearing plates, rivette , chirr plate, ms bed plate, ms guage tie plate, structure bar, ms tie plates, slide chaires, ls beam, center pivot, air brake cylinder, knuckle, adopter narrow jaw, tamping tools, track machine parts, brake shoe head, locking plate, long pull rod, operating handle, cbc lock, cbc yoke, lower spring sheet beam, center beams, center pivot washer, screw couplings, lower spring sheet beam, center beams, cut pieces of pipes, buffers, buffer plungers, buffer casings, footover bridge draw gear hooks, silent blocks, brake cylinder, cut off sheets, collars, iron rods, face plate, bolt & nut stresses, and other items coming under ms scrap on as is where is condition available under the custody of dms 08 ward ap. ( cutting permitted ) ( loc:bin no 0128 at scrap yard...

Medical Education Department - Karnataka

31462273 supply of equipments to ddrc, rims teaching hospital, raichur tender title 1 physio ball : size 55 cm 1 7665.00 2 physio ball : size 75 cm 1 3 physio ball : size 95 cm 1 4 balancing board / equilibrium board 1 5 static cycle 1 6 weighing scale 1 7 shoulder wheel ( marine type ) 1 8 cryotherapy unit 1 9 corner seater 1 10 wobble / rocker board 1 11 parallel bars 1 12 postural training mirror 1 13 bolsters 12”x38” : large size 1 14 ankle exerciser 1 15 overhead pulleys 1 16 ankletg / weight ( cuff set ) 1 17 wrist exerciser ( wall mounted ) 1 18 pyramids 1 19 adjustable folding wheel chair ss 1 20 paraffin wax bath tub : small 1 21 paraffin wax bath tub : medium 1 22 vertical sanding unit overhead 1 23 inclined sanding unit 1 24 square peg board : 1 set round peg board : cylindrical peg board : 25 cp chair 1 26 wrist roller ( wall mounting ) 1 1 bench drill 13 mm, ½ inches 2 450 watt impact drill set ( blue, 100 pieces ) 3 drill vice 3 4 heavy duty, g clamp 5 marble cutter 5 inch , gdc 121 6 auto pack machines stainless steel work table bench ( 45 x 26 x 34 inches, silver ) 7 hacksaw frame with hacksaw blade hf 40 professional rectangular frame heavy duty aluminum die cast handle, rigid & balanced frame with ms steel pipe, 8mm square fitting with wing nut 8 adjustable tension hacksaw overall length: 425 mm, height: 165 mm, depth of bow: 100 mm 9 plastic short measuring tape ( yellow ) 10 drift centre and leather punch set ( multicolor ) 11 stainless steel 300mm adjustable engineers combination square rule right angle ruler tool 12 electronic digital vernier caliper ruler carbon fiber composite 6inch 150mm 13 engraving pen tungsten carbide scribe and etching pen carve engraver scriber tools for stainless steel ceramics and glass 14 screw driver set with storage case 15 ball pein hammer 5g indestructible fiberglass 5 pcs set 200 / 300 / 500 / 700 / 900 gms 16 file tool set 5 pcs 8 / 200mm 17 goggles for eye protection reusable ( transparent ) 5 piece . 18 wood kitchen knife set with wooden block and scissors, knife set for kitchen with stand, knife set for kitchen use, knife holder for kitchen with knife 5 pieces ( black ) 19 soft face hammer with handle 20 stainless steel scale / ruler and mini hacksaw 6, 12 & 24 inch / 15, 30 & 60 cm 21 wood chisel set , 3pcs 1 / 2x7 3 / 4, 3 / 4x7 3 / 4, 1x7, 3 / 4 22 finish double open end spanner set ( 12 pieces, chrome ) 23 finish shallow offset bi hxring spanner set ( 8 pieces ) , chrome 24 plastic drill bit set drill bits set for wood ( 13 pieces, malleable iron, aluminum, plastic etc. ) 25 4 piece pliers set 26 stainless steel easy grip sansi / chimta / pincer utensil holder, 25x6x1cm ( silver ) 27 workshop table 6’x3’x3 1 / 2” with wood planks on the top of the angle frame finished with enamel paint. 28 professional angle grinder 29 hot air oven 24x18x18 s.s. chamber with digital temperature controller 30 jigsaw, 780 watts 31 steel bench vice munish heavy duty. jaw width 6inch 150mm 32 heavy professional cast iron bench vice heavy duty fixed base, blue127mm 33 double wheeled bench grinder 34 mini bench drill machine pillar drill 13mm chuck 350w motor 2620 rpm bench top mounted press 35 anvil 10 kg 36 anvil 25 kg 37 office table 38 office chair...

Visvesvaraya Technological University - Karnataka

31433311 tender for procurement of equipment, tools and consumables for atal idea lab at vtu pg centre, muddenahalli under aicte grants tender title 1 laser cutter 2 vinyl cutter 3 3d scanner ( handheld ) 4 cnc router 5 mini desktop lathe cum milling ( 1 desktop lathe cum milling ) 6 drilling machine 1 hp motor 7 handheld high speed drilling machine 15000 rpm with accessories 8 bench grinding machine 9 advanced motorized sewing machine 10 wood lathe 11 power circular saw 12 hand held scroll saw 13 hand held flexible dremel tool set 14 portable welding machine ( mig tig and arc welding ) 15 de soldering machine 16 refrigerator 17 normal and microwave oven 18 magnifying glass with stand 19 digital microscope 20 mixed signals oscilloscope 21 digital storage oscilloscope 22 heavy duty laser printer with xerox 23 manual pcb drilling machine 24 computer workstation in networking 25 quadcopter assembly kit 26 pcb prototyping equipment 27 soldering stations 28 dso 29 mso 30 benchtop power supply units 31 lcr bridge 32 dmm ( handheld ) 33 pcb fabrication tools 34 signal / function generator 35 benchtop multimeter 36 coil winding machine motorized 37 ham radio transceiver, antenna and related equipment with relevant software 38 vacuum cleaner 39 hot air gun 40 t shirt, mug and laptop bag printing machine 41 3d printing ( small 01 ) 42 3d printing ( big 02 ) 43 camera dslr 44 measuring equipment 45 fire extinguisher 46 first aid box 47 digital multimeter 48 cloths iron 49 electric components repository ( lcr meter, variac etc ) 50 3d printer filament ( 5 rolls ) 51 acrylic sheets 2mm area 8ft x 4ft 52 acrylic sheets 3mm area 8ft x 4ft 53 acrylic sheets 4mm area 8ft x 4ft 54 foam sheets 10mm area 8ft x 4ft 55 foam sheets 12mm area 8ft x 4ft 56 foam sheets 15mm area 8ft x 4ft 57 ply boards 8mm area 8ft x 4ft 58 ply boards 10mm area 8ft x 4ft 59 ply boards 12mm area 8ft x 4ft 60 ply boards 15mm area 8ft x 4ft 61 nylon rods ( length 1 m ) 12mm 62 nylon rods ( length 1 m ) 15mm 63 nylon rods ( length 1 m ) 18mm 64 nylon rods ( length 1 m ) 25mm 65 nuts 3mm 66 nuts 4mm 67 nuts 5mm 68 nuts 6mm 69 nuts 8mm 70 nuts 10mm 71 nuts 12mm 72 bolts length 1 inch dia. 3mm 73 bolts length 1 inch dia. 4mm 74 bolts length 1 inch dia. 5mm 75 bolts length 1 inch dia. 6mm 76 bolts length 1 inch dia. 8mm 77 bolts length 1 inch dia. 10mm 78 bolts length 1 inch dia. 12mm 79 bolts length 1.5 inch dia. 3mm 80 bolts length 1.5 inch dia. 4mm 81 bolts length 1.5 inch dia. 5mm 82 bolts length 1.5 inch dia. 6mm 83 bolts length 1.5 inch dia. 8mm 84 bolts length 1.5 inch dia. 10mm 85 bolts length 1.5 inch dia. 12mm 86 bolts length 2 inch dia. 3mm 87 bolts length 2 inch dia. 4mm 88 bolts length 2 inch dia. 5mm 89 bolts length 2 inch dia. 6mm 90 bolts length 2 inch dia. 8mm 91 bolts length 2 inch dia. 10mm 92 bolts length 2 inch dia. 12mm 93 bolts length 2.5 inch dia. 3mm 94 bolts length 2.5 inch dia. 4mm 95 bolts length 2.5 inch dia. 5mm 96 bolts length 2.5 inch dia. 6mm 97 bolts length 2.5 inch dia. 8mm 98 bolts length 2.5 inch dia. 10mm 99 bolts length 2.5 inch dia. 12mm 100 screws 1mm 101 screws 2mm 102 screws 3mm 103 screws 4mm 104 screws 5mm 105 washers 3mm 106 washers 4mm 107 washers 5mm 108 washers 6mm 109 washers 8mm 110 washers 10mm 111 washers 12mm 112 studs ( length 1 m ) 4mm 113 studs ( length 1 m ) 6mm 114 studs ( length 1 m ) 8mm 115 nails 1 inch 116 nails 2 inch 117 nails 3 inch 118 nails 4 inch 119 adhesives m seal 120 adhesives feviquick 121 adhesives fevi bond 122 2 way tapes 123 pvc pipes ( length 10ft ) 0.75 inch 124 pvc pipes ( length 10ft ) 1 inch 125 pvc pipes ( length 10ft ) 1.5 inch 126 pvc pipes ( length 10ft ) 2.5 inch 127 pvc pipes ( length 10ft ) 3 inch 128 aluminium channels ( length 12 feet ) l 129 aluminum channels ( length 12 feet ) c 130 aluminum channels ( length 12 feet ) box 131 aluminium channels ( length 12 feet ) strip length 132 pcb drill bits 0.5mm 133 pcb drill bits 0.8mm 134 pcb drill bits 1mm 135 pcb drill bits 1.2mm 136 drill bits 3mm 137 drill bits 4mm 138 drill bits 5mm 139 drill bits 6mm 140 drill bits 8mm 141 drill bits 10mm 142 drill bits 12mm 143 carpentry boring bits ( entire kit ) 144 electronic active and passive components electronic capacitors 145 electronic active and passive components electronic resistors 146 electronic active and passive components electronic diodes 147 electronic active and passive components electronic transistors 148 usb cables ( for connecting arduino andother development boards ) 149 radium cutter knives 150 glue sticks 151 hack saw blades 6inch 152 hack saw blades 12 inch 153 9v battery snaps 154 lan cable ( for connecting raspberry pi ) 155 connector 156 stock pcb ( fr4 ) 157 nuts, bolts and stand offs ( for pcb ) 158 resistors 159 capacitors 160 inductors, relays and coils 161 magnets 162 sensors 163 digital ic 164 analog ic 165 power supply and charger ic 166 led strip 167 transistor and mofset 168 diodes and leds 169 microcontroller ic and boards 170 batteries and battery holders 171 soldering wire 172 sensor set including sensors for home / industry / agriculture automation, medical diagnosis 173 arduino uno boards 174 node mcu ( esp8266 ) boards 175 raspberry pi 4 boards 176 al for artificial intelligence based applications 5 sets 177 black wireless ( 5 sets ) 178 peripheral sets for arduino / node mcu / raspberry pi ( 10 sets ) 179 esp32 cam development board wi fi+ bluetooth with ov2640 camera module ( 5 sets ) 180 solnoi electronics raspberry pi 3 camera module night vision camera ( 5 sets ) 181 aluminium rolls for vinyl cutter 182 hacksaw 183 micro chisel set 184 pliers 185 cordless drilling machines 186 jigsaw machines 187 power circular saw 188 files set 189 file handles 190 needle files 191 pipe vice 192 mini hacksaw 193 ball peen hammer 194 steel shaft claw hammer 195 nylon mallet 196 rubber mallet 197 allen key set 198 dremel multitool kit 199 double ended spanner sets 200 12 piece open ended spanner set 201 scroll saw machine 202 tool wall covering perforator 203 dremel moto saw 204 bench grinding machine 205 power return measuring tape 206 tri square 8 inch 207 stainless steel rule 208 digital vernier caliper 209 spirit level 210 dremel cordless rotary tool 211 power router 212 sewing machine 213 impact drill 214 ratchet set 215 router bit starter kit 216 scroll saw 217 hot air blower with soldering iron 218 tin cutter with spring 219 power handheld drilling machine kit 220 centrifugal blower 221 screwdriver sets 222 cutting mats 223 micrometer 224 glue gun 225 air compressor 226 tongue and groove pliers 227 non contact voltage tester 228 wire stripper 229 flash tape 230 flashlights 231 dc regulated power supply 232 desoldering wick 233 filament dehydrator 234 reflow oven 235 glass cutter 236 gypsum ( kgs ) 237 c clamp 238 baby vice 60mm 239 bench vices 240 anvil 241 walkie talkie ( 6 pcs ) 242 laptop...

South Western Railway - Karnataka

31199052 auction sale of [ pl no. 98050126 scrap cond. / released / unserviceable ms scrap such as cbc coupler bodies, angels channels, signal rods, dash pot, yokes, draft gears sets, ms sheets, winch for lc gate, lever lock, lever rods, pull rods, suspension tube, bracket cl, housing axle bearing, chequered plates, cbc operating handle, rail cutter, rel hook, anti roll bracket, dradger drum, ms stool, centring disc, ms liners, center pivot washer, brake shoe head, center pivot ring, side frame key, adopter narrow jaw, anti roll bar, rail dolly, fish bolts & nuts, wear plate, adopter wide jaw, suspension rods , equalizing stay, erc clips, wagon doors, rail flange, chain hook, rotary shield with bearings, sab parts, ls beam, hangers, brake levers, brake hangers, ms plates of elastomeric pad, adapter broken, center pivot top, anvil, workdout sab, gib crane, cr reservoir and bracket, plate screws, knuckle, brake cylinder fabricated test rig, gear wheel, anchor link, cash chest, brake beam cut parts, axle box housing, bearing plates, rivette, chirr plate, ms bed plate, ms guage tie plate, structure bar, ms tie plates, slide chaires, ls beam, center pivot, air brake cylinder, knuckle, adopter narrow jaw, tamping tools, track machine parts, brake shoe head, locking plate, long pull rod, operating handle, cbc lock, cbc yoke, lower spring sheet beam, center beams, center pivot washer, screw couplings, lower spring sheet beam, center beams, cut pieces of pipes, buffers, buffer plungers, buffer casings, draw gear hooks, silent blocks, brake cylinder, cut off sheets, collars, iron rods, face plate, bolt & nut stresses, and other items coming under ms scrap on as is where is condition available under the custody of cdms / 08 ward / ap. ( loc:bin no 0124 & 0137at scrap yard...

Karnataka Power Corporation Limited - Karnataka

31161391 supply of tools and tackles tender title 1 hss tap set m 5 set of three forms of hss materials, hand operated tap sets. make: addision, totem 2 hss hand tap set m6x1.0 hand tap set metric ( rhs ) size: m6x1.0 3 hss tap set m 8 set of three forms of hss materials, hand operated tap sets. make: addision, totem 4 hss tap set m 10 set of three forms of hss materials, hand operated tap sets. make: addision, totem 5 hss tap set m 12 set of three forms of hss materials, hand operated tap sets. make: addision, totem 6 hss tap set m 14 set of three forms of hss materials, hand operated tap sets. make: addision, totem 7 hss tap set m 16 set of three forms of hss materials, hand operated tap sets. make: addision, totem 8 hss tap set m 18 set of three forms of hss materials, hand operated tap sets. make: addision, totem 9 hss tap set m20 totem make tap set m20 coarse thread 10 hss tap set m 22 set of three forms of hss materials, hand operated tap sets. make: addision, totem 11 hss tap set m 24 set of three forms of hss materials, hand operated tap sets. make: addision, totem 12 hss hand tap set m27 totem / it / addison make hsshand tap set of size m27x3mm pitch. ( rh ) / is.1859.rtps work shop 13 hss tap set m 30 set of three forms of hss materials, hand operated tap sets. make: addision, totem 14 36 x 4.0 pitch hss tap sets addision / totem make set of three forms of hss materials, hand operated tap sets. 15 hss hand tap of size: m6 hand taps with 105 cobolt ( a set consist of three nos ) .totem make standard 16 hss hand tap of size :m8 hand taps with 105 cobolt ( a set consist of three nos. ) .totem make std 17 hss hand taps of size:m20 hss hand tap set totem make std. 18 hss hand tap 1 / 2bsp hss hand tap set size 1 / 2 bsp. totem make std 19 hss hand tap 3 / 4 bsp hss hand tap set 3 / 4 bsp. totem make std 20 hss hand taps 1 bsp hss hand tap set size 1 bsp. totem make std. 21 hss hand tap 1 1 / 4 bsp hss hand tap set 1 1 / 4 bsp. totem make std. 22 hss hand tap 1 1 / 2 bsp hss hand tap set size 1 1 / 2 bsp . totem make std. 23 hss hand tap 1 3 / 4 bsp hss hand tap set size 1 3 / 4 bsp. totem make std. 24 hss hand tap 2 bsp hss hand tap set size 2 bsp. totem make std. 25 out side micrometer 0 25mm hammertone, baked enemel finished from ratchet stop or friction thimble for exact repitative readings. measuring faces: carbide tipped, supplied in a standard box. range: 0 25mm make: mitutoyo. 26 outside micrometer 0 150mm hammertone, baked enamel finished frame ratchet stop or friction thimble for exact repetitive readings, measuring faces carbide tipped, supplied in fiiied wooden case. a ) range 0 150mm, l.c 0.01 mm ( with 6 anvils, 5 micrometer standards ) mitutoyo 104 135a 27 tubular inside micrometer wide range of id measurements by combining extension rods ( pipes ) and anvils with the micrometer head. carbide tipped measuring faces. supplied in fitted plastic case / wooden case. range 50 300 mm, travel of micrometer head 13 mm, extension rods of 13mm, 25mm, 50mm ( 2 pcs. ) , 100mm make: mitutoyo, model:137 202 ) 28 vernier caliper 0 180mm varnier caliper manufactured from bardened stainless steel with satin finish for measuring inside, outside, depth and step, supplied with plastic holster in fitted carton. range: 0 180mm, lc:0.02mm with fine adjustment. make: mitutoyo model:532 120 29 vernier caliper 0 280mm varnier caliper manufactured from bardened stainless steel with satin finish for measuring inside, outside, depth and step, supplied with plastic holster in fitted carton. range: 0 280mm, lc:0.02mm with fine adjustment. make: mitutoyo model:532 121 30 dial gauge 0 10mm lc 0.01 standard 0.01mm graduation dial gauge having an outer frame with an outside diameter 57mm the stem spindle in made of high strength quanch hardened stainless steel which resisitive strenuous use. a carbide contact point. back with offset lug, ( water proof &shock proof ) range :0 10mm, lc 0.01mm, readingon the dial: 0 100mm, range per revalution:1mm. model : 2046s 19 make : mitutoyo 31 magnetic stand for dial gauge lever type, two magnetic faces and large vee with universal clamp, heavy duty i ) magnetic pull of 40 60 kg, ii ) overall height of 200 250mm description of the articlewith precision adjustment & on / off switch make : mitutoyo / baker 32 dial gauge 0 to 10mm make: mitutoyo japan. 33 oil dip measurement tape item name:oil dip measurement tape application:measuring of oil levels of hfo & ldo tanks length: 15meter material: handle brass material with wooden handle / rubberized non slip handle ( pvc ) gauge blade / tape stainless steel gauge rod brass frame brass weight: 1 to 1.5 kg 34 pitch gauge range 0.35 6mm for accurately measuring internal and external forms. manufactured from hardened and polished steel, the blades are precision milled for optimum accuracy. enclosed in a steel case. metric screw pitch gages : 22 leaves, range 0.35 6mm. make: mitutoyo. model: 188 130. 35 pitch gauge r:4 42tpi for accurately measuring internal and external forms. manufactured from hardened and polished steel, the blades are precision milled for optimum accuracy. enclosed in a steel case. whitworth screw pitch gages : 30 leaves, range 4 42 tpi make: mitutoyo model:188 101 ) 36 feeler guage set 0.05 1 mm metric feeler gauge set 0.05x1.0x150 mm make: everest 37 vee block 100x80x80 matched and numbered paris of closed grained iron casing accurately machined. precision 90 deg. v groove ( in pair ) amke: crystal dimension: 100 x 80 x 80mm ( lxwxh ) 38 external calipher 300 mm high quality polished steel. ground finished points, a fine adusting screw is mounted across the legs for setting the distance between the two points. circular spring bow joins the legs, with knurled extension attached for the use when pivoting the calipher. size: 300mm make: mitutoyo model: 950 225 39 internal calipher 300 mm high quality polished steel. ground finished points, a fine adusting screw is mounted across the legs for setting the distance between the two points. circular spring bow joins the legs, with knurled extension attached for the use when pivoting the calipher. size: 300mm make: mitutoyo model: 950 235. 40 mill spring collet 4mm, er 40 e 40 schaubline type milling collet adopter made of alloy case harden steel to is 6238 with standard specifications d 40, d 30 & l 46 mm, suitable for holding 4mm end mill. 41 mill spring collet 5mm, er 40 e 40 schaubline type milling collet adopter made of alloy case harden steel to is 6238 with standard specifications d 40, d 30 & l 46 mm, suitable for holding 5mm end mill. 42 mill spring collet 6mm, er 40 e 40 schaubline type milling collet adopter made of alloy case harden steel to is 6238 with standard specifications d 40, d 30 & l 46 mm, suitable for holding 6mm end mill. 43 mill spring collet 8mm, er 40 e 40 schaubline type milling collet adopter made of alloy case harden steel to is 6238 with standard specifications d 40, d 30 & l 46 mm, suitable for holding 8mm end mill. 44 mill spring collet 10mm, er 40 e 40 schaubline type milling collet adopter made of alloy case harden steel to is 6238 with standard specifications d 40, d 30 & l 46 mm, suitable for holding 10mm end mill. 45 centre punch 6 centre punch 6 46 internal circlip plier 6 internal circlip plier 6 straight jaw make :taparia / everest 47 internal circlip plier set 8 internal circlip plier set ( 8mm to 45mm ) make :taparia 48 circlip plier internal, 8 circlip plier internal 8. make: taparia / pye / everest 49 9 internal circlip plair made 9 internal circlip plair made of chrome vanadium steel and nose tips hardness up to 40rc, fitted with spring, bent nose type. make: taparia / pye / everest 50 external circlip plier 6 make : taparia / everest 51 circlip plier external, 8 external circlip plier of taparia make. 52 9 external circlip plair made 9 external circlip plair made of chrome vanadium steel and nose tips hardness up to 40rc, fitted with spring, straigt nose type. 53 circlip plier extrn12 st jaws circlip plier external 12 st jaws. 54 crimping tool crimping tool suitable for 0.5 mm2 to 16 mm2 cable 55 combination plier 200mm make: taparia / everest 56 3 jaws bearing puller set three jaws bearing puller set of 4 pc material : forged alloy steel rust resistant chrome finish reversible jaws for inside and outside pulling number of jaws : 3 size: 3 in., 4 in., 6 in., 8 in. pullers make : taparia, everest. 57 bearing puller deep groove ball bearing puller kit. the puller kit contains six sets of different size puller arms, two spindles and one handle packed in a carrying case. the tmmd 100 is suitable for dismounting up to 71 different skf deep groove ball bearings from shaft diameter ranging between 10 and 100 mm model: tmmd 100 make: skf. 58 bearing puller ( 2tonne, 3leg ) specification: name:bearing puller make:everest / mekster. capacity:2tonne jaws:3nos, self lockable. reach:80mm spread:min 15mm, max 120mm type:screw operated note:the item should be of high quality, durability & user friendly. 59 3 jaw hydraulic puller 5 ton hydraulic 3 jaw pullers with pushing adapter 15.9 mm, and 22.2 mm and puller head cap: 5 tonn, reach: 222 mm, spread: 292 mm, jaw thickness:8.7 mm, jaw width: 25 mm. make: enerpac / powerteam / mekastar. 60 3 jaw hydraulic puller 10 tonn hydraulic 3 jaw pullers with pushing adapter 15.9 mm, and 22.2 mm and puller head cap: 10 tonn, reach: 381 mm, spread: 432 mm, jaw thickness:14.3 mm, jaw width: 25 mm. make: enerpac / powerteam / mekastar. 61 729101 repair kit 226400 e 3, reapair kit ( c+e j ) for oil injection kit 729101 400 mpa, make: skf 62 729101 valve screw 226400 e 1, valve screw for oil injection kit 729101 400 mpa, make: skf 63 1 square drive 46 mm 1 square drive 46 mm vasuki / rasuki / mekaster 64 blower bosch make electric blower specification : model gbl 800 part no 0 601 980 130 power input 550 w air volume 2.7 m3 / min. make bosch ltd., 65 hot air gun bosch make specification : model ghg 630 dce part no. 0 601 94c 704 power input 2000w, temp. range 50 degree 630 degree air flow rate 150 / 300 / 500 l / min.with lcd display make bosch ltd., 66 grease gun grease gun 1 kg hand operated grease gun with hose and nipple 67 hand grease gun lever type 12 hand operated grease gun ( 1 kg capacity ) with hose and adopter for fixing to different sizes of nipples. 68 hand operated grease pump 5kg specification : drum capacity:5 kgs. hose length: 6 mtrs. block pressure:140 kg / sq.cm. type of hose:wire braded, oil resist. output:3gms / stroke. make:elgi / groz / airtech / equivalent 69 grease pump with nipples 05 kg grease pump with nipples make : elgi suppliers oreintal tools ltd., mangalore 70 rotary barrel hand pump construction: heavy duty cast iron body with 3pc suction tube application: diesel, kerosene, heating oil, motor oil, lubricating oil, etc do not use with water based media, acids, petrol capacity: 5 liters / 20 turns suitable for: 50 210 litre drums 71 rotary hand pump size 1 ( for oil barrels ) 72 repair kit for hydraulic pump part no: p468 n100, make: enerpac, model: p468 n100, repair kit for hand pump. 73 repair kit for cll200 6 d4610k part no: cll200 6 d4610k, repair kit for cylinder enerpac cylinder model: cll200 6 d4610k, jack capacity : 200ton 74 bench drilling m / c bench drilling machine with one set of drilling bits of all sizes, input power:1200w, no load speed at 1st gear: 50 250rpm, no load speed at 2nd gear: 100 510rpm, drilling diameter in steel: 1.5mm to 50mm, all accessories and carrying case, type:gbm 50 2, make: bosch / dewalt / black decker / equivalent 75 metal cut off saw m / c metal cut off saw machine with 5 no of metal cutting disc, cutting disc diameter:355mm, cutting disc bore:25.4mm, no load speed:3800 rpm, input power: 2200 watts, all accessories and carrying case, type:gco 220, make:bosch / dewalt / black decker / equivalent 76 magnetic stand flexible magnetic stand for dial indicator. make:mitutoyo order no:7012 10 77 mt 6 to mt 5 reduction sleeve mt 6 to mt 5 reduction sleeve for heavy duty lathe machine mt 6 ( external ) to mt 5 reduction sleeve, made out of crome alloy steel, case hardened and groung to precission with grade 1 accuracy to suit is 6702 1972 78 mt 6 heavy duty revolving cent mt 6 heavy duty revolving centre 79 heavy duty cut off saw spec:14heavy duty cut off saw 2100w make:kpt / bosh / wolf 80 dial guage with magnetic stand dial guage with magnetic stand accuracy:0.01mm model : 2046s make: mitutoyo japan made only...

South Western Railway - Karnataka

31154502 supply of supply installation commissioning of spares of 1 lock bolting installationsupply installation commissioning of spares of 1 lock bolting installation,supply, installation and commissioning of spares of 1 lock bolting installation tool of m/s orione hydraulics pvt ltd to model no. ohpl 1 25e consisting of nine different items, 1. seal kit, 2. hoses, 3. anvil, 4. ram, 5. ejector, 6. release, 7. jaw set, 8. compression spring and 9. dump valve pin....

Medical Education Department - Karnataka

31029453 supply of equipments to ddrc, rims teaching hospital, raichur tender title 1 physio ball : size 55 cm 2 physio ball : size 75 cm 3 physio ball : size 95 cm 4 balancing board / equilibrium board 5 static cycle 6 weighing scale 7 shoulder wheel ( marine type ) 8 cryotherapy unit 9 corner seater 10 wobble / rocker board 11 parallel bars 12 postural training mirror 13 bolsters 1238 : large size 14 ankle exerciser 15 overhead pulleys 16 ankle / weight ( cuff set ) 17 wrist exerciser ( wall mounted ) 18 pyramids 19 adjustable folding wheel chair ss 20 paraffin wax bath tub : small 21 paraffin wax bath tub : medium 22 vertical sanding unit overhead 23 inclined sanding unit 24 square peg board, round ped board, cylinderical peg board 25 cp chair 26 wrist roller ( wall mounting ) 27 bench drill 13 mm, â½ inches 28 450 watt impact drill set ( blue, 100 pieces ) 29 drill vice 3 30 heavy duty, g clamp 31 marble cutter 5 inch , gdc 121 32 auto pack machines stainless steel work table bench ( 45 x 26 x 34 inches, silver ) 33 hacksaw frame with hacksaw blade hf 40 professional rectangular frame heavy duty aluminum die cast handle, rigid & balanced frame with ms steel pipe, 8mm square fitting with wing nut 34 adjustable tension hacksaw overall length: 425 mm, height: 165 mm, depth of bow: 100 mm 35 plastic short measuring tape ( yellow ) 36 drift centre and leather punch set ( multicolor ) 37 stainless steel 300mm adjustable engineers combination square rule right angle ruler tool 38 electronic digital vernier caliper ruler carbon fiber composite 6inch 150mm 39 engraving pen tungsten carbide scribe and etching pen carve engraver scriber tools for stainless steel ceramics and glass 40 screw driver set with storage case 41 ball pein hammer 5g indestructible fiberglass 5 pcs set 200 / 300 / 500 / 700 / 900 gms 42 file tool set 5 pcs 8 / 200mm 43 goggles for eye protection reusable ( transparent ) 5 piece 44 wood kitchen knife set with wooden block and scissors, knife set for kitchen with stand, knife set for kitchen use, knife holder for kitchen with knife 5 pieces ( black ) 45 soft face hammer with handle 46 stainless steel scale / ruler and mini hacksaw 6, 12 & 24 inch / 15, 30 & 60 cm 47 wood chisel set , 3pcs 1 / 2x7 3 / 4, 3 / 4x7 3 / 4, 1x7, 3 / 4 48 finish double open end spanner set ( 12 pieces, chrome ) 49 finish shallow offset bi hxring spanner set ( 8 pieces ) , chrome 50 plastic drill bit set drill bits set for wood ( 13 pieces, malleable iron, aluminum, plastic etc. ) 51 4 piece pliers set 52 stainless steel easy grip sansi / chimta / pincer utensil holder, 25x6x1cm ( silver ) 53 workshop table 6 inch x 3 inch x 3 1 / 2 inch with wood planks on the top of the angle frame finished with enamel paint 54 professional angle grinder 55 hot air oven 24x18x18 s.s. chamber with digital temperature controller 56 jigsaw, 780 watts 57 steel bench vice munish heavy duty. jaw width 6inch 150mm 58 heavy professional cast iron bench vice heavy duty fixed base, blue127mm 59 double wheeled bench grinder 60 mini bench drill machine pillar drill 13mm chuck 350w motor 2620 rpm bench top mounted press 61 anvil 10 kg 62 anvil 25 kg 63 office table 64 office chair...

Department of Defence Production - Karnataka

30873974 bids are invited for digital micrometer 25 50 mm (q3) , dial indicator(0 10mm) (q3) , digital micrometer 0 25mm (q3) , digital vernier caliper(0 450mm) (q3) , digital vernier caliper with depth rod(0 150) (q3) , digital internal micrometer (10 14) (q3) , dial gauge stand (triple jointed swivel arm & fine adjustment with magnetic base) (q3) , digital depth vernier caliper (with flange flat disc type anvil tip) 0 150mm (q3) , analog internal micrometer (with setting ring(25 35mm) (q3) , boregauge with analog dial indicator and setting rings(3 7mm) (q3) , dial gauge stand (with granite base) 0 250mm (q3) , hardened and ground angle plate(0 20mm) (q3) , parallel blocks (q3) , dial gaugeplunger type (q3) , digital vernier caliper(0 450mm)(q3) , dial gauge stand (with triple jointed arm and fineadjustment with magnetic base) (q3) total quantity : 79...

Public Works Department - Karnataka

30797840 the quotation called for rates to prepare estimate purposes of lab equipments & machinarys for government engineering college , ramanagara tender title 1 spring constant setup setup includes metal stand with 50cm scale fitted. soft springs 2nos. slotted weights of 5 pieces ( 50gm each ) 2 set. 2 stefan’s law setup includes 0 6v regulated power supply. filament bulb 6v. digital voltmeter and ammeter. 3 photo diode setup setup includes variable voltage sources ( 0 5 v and 0 15v ) . photodiode and bulb holding setup. 2mm / 3mm patch cards. 4 numerical aperture of an optical fiber setup setup includes laser source, 560nm, 5 mw. optical fiber cable, 1.5m length. movable fiber holding stand with scale fitted and screen. 5 di electric constant – expt setup setup includes a setup within built voltage source, 0 30 v digital voltmeter, digital stop clock, resistor, 3 capacitors with different capacitance value. 2 mm patch cords. 6 magnetic field intensity along the axis of a coil setup includes circular coil setup of 6” dia with a bridge along the axis of the coil fitted with scale. deflection magnetometer 4”, commutator. dc ammeter ( 0 5a ) , dc voltage source connecting wires. 7 forced oscillation study setup includes a modified pohl’s pendulum ( torsion pendulum, ) setup variable speed motor setup for forced oscillations. digital frequency meter. suitable power sources with connecting wires. 8 resistivity by four probe setup includes a four probe setup with oven ( 1500c ) . digital or analog thermometer. semiconductor and conductor samples ( each one ) suitable power sources with connecting wires. 2 computer science and engineering 1 c programming laboratory computers ( wi fi enabled ) computers:7thgeneration corei5 / i7, 8gb ram, 1tb hdd, 2gb graphics, 23.8 fhd windows 10 all in one desktop pc with wi fi enabled each / no 1 2 server computer higher end specifications each / no 1 3 laser printers hp laser jet pro m1210 multifunction printer series each / no 1 4 ups and batteries 10 kva – ups each / no 1 5 batteries rack capacity of 20 to 25 batteries each / no 1 6 network printer hp jet 4240n network ready laser printer each / no 1 7 networking for 20 nodes cat6 utp cable ( box of 305 mtrs ) , 24 port ethernet networking switch – sr224 cisco, i / o with smb, jack panel – 24 ports cat6 patch cable ( 3 mts ) , rj 45 connectors, 1” flexible pipe per runnining mtr, 2” flexible pipe per running mts, networking rack each / no 1 8 air conditioners for labs centralized ac with duct system each / no 1 9 projectors dell 1510x each / no 1 10 analog and digital electronics lab / microcontroller lab arm / 7tdmi / lpc2148 kit including all interface and accessoreies each / no 1 11 patch cords each / no 1 12 cro probes each / no 1 13 pcb spring board each / no 1 14 ics: 555 ua741, 7400, 7402, 7404, 74138, 74151 7490, 7495, 7486, 7410, 7420, 7408, 7432, 7410, 7490, 7476 each / no 1 15 resistors: 100k, 10 k, 1k, 270 ω, 22k, 4.7 k, 15k, 7 k, 5k, 33 k, 6.8 k, 3.3 k, 2.2 k, 90 k, 470 ω, 8.2 k, 47 k, 1.8 k, 10 k , potentiometer 90k, 20k each / no 1 16 capacitor:1 uf, 0.47 uf, 0.01 uf, 0.1 uf, dc supply: +5 volts 1a, ±12 volts 500 ma socket: 5 nos 16 / 20 pin zif socket bread board: 1 nos 680 tie points logic i / p: 16 nos toggle switches for inputs logic o / p: 16 nos high bright leds for outputs ttl clock: 1hz, 10hz, 100hz, 1 khz, 10 khz display: 2 nos 7segment display mono pulse: 1 hi & 1 low pulse terminals: 4mm bt 15 terminals each / no 1 17 ups 15 kva online ups, dsp controlled, igbt, with lcd display 1 phase input output each / no 1 18 150 kvh batteries exide make 12v 150 / 200 ah smf batteries each / no 1 19 computer lab wall mounted projectors 3, 000 ansi lumens, resolution 1024x768 display type 0.55 dlp x 1 video modes 720p, 1080i, 1080p / 60, 1080p / 24 lamp type 190w metal halide bulb each / no 1 20 staff mfb lazer printers main input tray 150 sheets of regular weight print speed 14 a4 pages per minute ( ppm ) , 15 letter size ppm print resolution 600 x 600 dpi duty cycle 8, 000 single sided pages per month ( maximum ) each / no 1 21 department and staff laptop omputers:7thgeneration corei5 / i7, 8gb ram, 1tb hdd, 2gb graphics, 23.8 fhd windows 10 all in one desktop pc with wi fi enabled each / no 1 22 c programming laboratory computers ( wi fi enabled ) computers:7thgeneration corei5 / i7, 8gb ram, 1tb hdd, 2gb graphics, 23.8 fhd windows 10 all in one desktop pc with wi fi enabled each / no 1 23 computer network laboratory / mobile application developmen / artificial intelligence and machine learning laboratory server computer higher end specifications each / no 1 24 laser printers hp laser jet pro m1210 multifunction printer series each / no 1 25 ups and batteries 10 kva – ups each / no 1 26 batteries rack 25 batteries each / no 1 27 network printer hp jet 4240n network ready laser printer each / no 1 28 networking for 20 nodes cat6 utp cable ( box of 305 mtrs ) , 24 port ethernet networking switch – sr224 cisco, i / o with smb, jack panel – 24 ports cat6 patch cable ( 3 mts ) , rj 45 connectors, 1” flexible pipe per runnining mtr, 2” flexible pipe per running mts, networking rack each / no 1 29 air conditioners for labs centralized ac with duct system each / no 1 30 projectors dell 1510x each / no 1 3 e&c engineering department 1 regulated power supply 1. ar ps 302s dc regulated power supply with short circuit & overload protection 0 30 / 2a single out put with two digital meters. each / no 1 2. ar ps 302d dc regulated power supply with short circuit & over load protection 0 30v / 2a dual output with two digital meters each / no 1 2 bread board bread board with terminals mounted on plate each / no 1 3 spring board spring board with two 16 pin zif socketand 64 spcar springs. each / no 1 4 decade boxes plastic switches 1. decade resistance box with 6 dials ( 1 ohms to 1 m ohms ) each / no 1 2. decade capacitance box with 6 dials ( 10pfd to 100pfd, 100pfd to 0.001ufd, 0.001ufd to 0.01ufd to 0.1ufd, .1ufd to 1ufd, 1ufd to 10ufd ) each / no 1 3. decade inductance box with 6 dials ( 10uh to 100uh, 100uh to 1mh, 1mh to 10mh, 10mh to100mh, 100h to 1h, 1h to 10h ) each / no 1 5 lcr meters handheld lcr meter each / no 1 6 signal enerator generator phy 103far 0.2hz to 2mhz microcontroller based signal generator with lcd display for frequency & amplitude read out int / ext ( ext upto 3mhz counter ) sine / square / triangle and puse with variable duty cycle amplitude 2mv 20vpp with 40db attenuation. each / no 1 7 digital storage oscilloscope 100 mhz dso model :gds 1102 u ( 1 gs / s, 2 mega points mem each / no 1 8 desk top digital meters 1. ac voltmeter single range each / no 1 2. dc voltmeter single range each / no 1 3. ac ammeter single range each / no 1 4. dc ammeter single range each / no 1 9 analog oscilloscope scientific 30mhz dual trace oscilloscope each / no 1 10 scr kit a ) variable dc power supply 3v to 30v @ 500ma to vary vak b ) variable dc power supply 1.5v to 15v @ 100ma to vary ig c ) 10watts fixed resistor rg for gate current d ) 50watts variable resistance for load current variation e ) 2 scr’s of different ratings to find different holding and latching current f ) digital dc milliammeter for gate current ig g ) digital dc ammeter for load current il. h ) digital dc voltmeter for vak i ) 230v ac mains operated j ) unit enclosed in a powder coated ms box with screen printed polycarbonate panel each / no 1 11 scr controlled hwr and fwr using rc triggering circuit kit a ) 20v @ 0.5a ac supply b ) 10a / 600v scr with heat sink and snubber circuit c ) potentiometer, fixed resistor, capacitor and associated components to build r and r c triggering circuit d ) single phase diode bridge rectifier for full wave controlled rectifier e ) 25 watts resistive load f ) 230v ac mains operated g ) unit enclosed in a powder coated ms box with screen printed polycarbonate panel. each / no 1 12 measurement of resistance using wheatstone and kelvin’s bridge kit wheatstone bridge: a ) dc power supply – 5v@1a b ) mr 100 sensitive galvanometer c ) the series arm consists of 10x1, 10x10, 10x100, 10x1000 ohms d ) the ratio arm consists of rotary switch of 7 multiplying factors of 0.001, 0.01, 0.1, 1, 10, 100 and 1000. e ) 230v ac mains operated kelvins double bridge: a ) dc power supply 5v@2a b ) mr 100 sensitive galvanometer c ) the double ratio arm consists of rotary switch of 5 multiplying factors of 0.01, 0.1, 1, 10 and 100 d ) 10 coils of 0.1 ohm resistors connected in a rotary switch in series with circular slide wire of 100 divisions to vary r e ) terminals are connect 4 terminal unknown resistor f ) 230v ac mains operated each / no 1 13 characteristics of ldr & photo diode and turned on an led using ldr a ) variable dc power supply – 1.5v to 12v @ 250ma b ) digital dc voltmeter c ) digital dc milliammeter d ) ldr, photo diode, led, resistors and setup to vary the distance from ldr to lamp to vary light intensity on ldr e ) 230v ac mains operated each / no 1 14 measure temperature in terms of current / voltage using a temperature sensor bridge a ) temperature sensor –rtd ( pt 100 ) fitted on a heating element with thermometer for temperature measurement b ) digital voltmeter to measure temperature in terms of voltage c ) digital milli ammeter to measure temperature in terms of ma d ) temperature sensor bridge with associated components e ) 230v ac mains operated each / no 1 15 cro probes each / no 1 4 digital system design ( dsd ) lab 1 digital ic trainers with built in power supply digital ic trainer with built in power supply 10 logical i / p switches 10 logical o / p indicators 20 pin zif socket 5 os.bcd to seven segment display 2 nos. mono pulse generator frequency generator 1hz to 1mhz. bread oard 1 no. ( 165 x 50mm ) power supply + / 5v, + / 15v 4mm rminals with high quality patch cords. each / no 1 2 patch cord patch cord 4 mm each / no 1 3 ic tester minmax make microprocessor based analog & digital ic tester for testing analog ics upto 20 pins and digital ics upto 40 pins with 24 keys keyboard and 16 x 2 lcd alphanumeric display. model mme adit 40. each / no 1 5 microcontroller lab 1 microcontroller kit on chip 64kb flash program memory. 1792 bytes expanded ram ( xram ) . 2048 bytes eerom. spi interface. 16 bit programmable counter array for compare, capture, pwm. three programmable timer / counters. two external interrupts one 26 pin frc to connect to some als standard nifc interfaces the atmel at89c51ed2 8 bit micro controller with operating frequency of 11.0592mhz with an external crystal and supply voltage of +5v. four 10 pin frc connectors connected to port 0 to port 3 of controller a 9 pin d type female connector used for rs232 serial i / o interface for uart experiments and also for flash programming. serial interface through usb is also provided onboard a 9 pin d type male connector meant for power connection ( +5v and gnd ) . a push button switch for reset and a slide switch to select either program mode or run mode. a push button switch for external interrupt / int0 or / int1. alphanumeric 16x2 lcd display. each / no 1 two numbers of leds provided for general purpose. 16 switches organized as 4 rows x 4 columns. 8 bit dac interface rtc interface one adc ( adc0809 ) with a potentiometer to vary analog input & temperature sensor ic lm335 four level elevator simulator interface. traffic light simulator interface on board stepper motor and dc motor control interface. stepper motor and dc motor is supplied with evaluation board. four digit multiplexed 7 segment display interface. elegant enclosure with test points for monitoring 6 analog circuits lab 1 bread board bread board with terminals mounted on plate each / no 1 2 spring board spring board with two 16 pin zif socketand 64 spcar springs. each / no 1 3 microcontroller based signal generator phy 103far 0.2hz to 2mhz microcontroller based signal generator with lcd display for frequency & amplitude read out int / ext ( ext upto 3mhz counter ) sine / square / triangle and puse with variable duty cycle amplitude 2mv 20vpp with 40db attenuation each / no 1 4 digital storage oscilloscope 100 mhz dso model :gds 1102 u ( 1 gs / s, 2 mega points mem ) each / no 1 5 variable power supply ar ps 302d dc regulated power supply with short each / no 1 6 linear ic tester minmax make microprocessor based analog & digital ic tester for testing analog ics upto 20 pins and digital ics upto 40 pins with 24 keys keyboard and 16 x 2 lcd alphanumeric display. model mme adit 40 each / no 1 7 lcr meters handheld lcr meter each / no 1 8 decade boxes plastic switches 1.decade resistance box with 6 dials ( 1 ohms to 1 m ohms ) each / no 1 2. decade capacitance box with 6 dials ( 10pfd to 100pfd, 100pfd to 0.001ufd, 0.001ufd to 0.01ufd to 0.1ufd, .1ufd to 1ufd, 1ufd to 10ufd ) each / no 1 3. decade inductance box with 6 dials ( 10uh to 100uh, 100uh to 1mh, 1mh to 10mh, 10mh to100mh, 100h to 1h, 1h to 10h ) each / no 1 9 digital multimeter meco make each / no 1 10 linear ic trainers 16 pin zif sockets 2 nos. built in function generator 1hz to 100khz sine wave with variable amplitude & square wave. built in power supply ( +5v 1a, + / 15v 200ma, 0 to + / 15v 350ma, 24v, 200ma ) with metal box enclosure. variable input source 0 to + / 12v, 0 to + / 1.2v. 4mm sockets with patch cords. bread board ( 165 x 50mm ) 1no. potentiometers 3 nos. a / c source 6 0 6 regulators 7805, 7905, lm317 extra 20 terminals. 20 patch chords each / no 1 7 dsp lab 1 dsp starter kit tms320c6748 with emulator hardware the omap l138 c6000 dsp+arm processor is a low power applications processor based on an arm926ej s and a c674x dsp core. 456 mhz c6748 fixed / floating point dsp, on chip rtc, one mini usb serial port ( on board serial to usb ) , one fast ethernet port ( 10 / 100 mbps ) with status, leds, one usb host port ( usb 1.1 ) , one mini usb otg port ( usb 2.0 ) , one lcd port, two audio ports ( 1 line in & 1 line out ) , 14 pin jtag header, on board 128mb sdram and 128mb nand. software a complete integrated development environment ( ide ) , an efficient optimizing c / c++ compiler assembler, linker, debugger, an a advanced editor with code maestro™ technology for faster code creation, data visualization, a profiler and a flexible project manager dsp / bios™ real time kernel target error recovery software dsk diagnostic tool plug in ability for third party software for additional functionality. each / no 1 8 hdl lab 1 sda fpga 04 trainer sda fpga 04 trainer 32 inputs using 8 way four dip switches. each input of these switches has an led indication. 32 outputs through output ports of fpga connected to leds. 16x2 alpha–numeric lcd display with back light through 10 pin frc connectors to fpga / cpld port pins. six digit 7 segment displays connected through 10 pin frc connector to fpga / cpld port pin. 4x4 key matrix. 10 mhz, 5 mhz, 1mhz, 500 khz, 100 khz five different clock frequencies. on board relay connected using 10 pin frc to fpga / cpld port pins. on board traffic light simulator connected to fpga / cpld port pins using 16 pin frc. on board adc connected to fpga / cpld port pins using 16 pin frc. on board dac is provided to generate different waveforms and it is connected to fpga / cpld port pins using 16 pin frc. on board four level elevator connected to fpga / cpld port pins using 16 pin frc. two pin reliamate is provided on the board to connect external dc motor and it is connected to fpga / cpld port pins using 10 pin frc. 5 way powermate is provided to connect external stepper each / no 1 motor and it is connected to fpga / cpld port pins using 10 pin frc. 26 pin frc header with cable for connecting to als standard interfaces. 8 inputs using 0ne dip switches. each input of these switches has an led indication. one push button four sets of 20x2 female berg connector to plug the daughter board. programs can be downloaded from the pc to the fpga / cpld on the daughter board using programming tool. 2 daughter board 6 xlinix xc6slx4tq144: spartan6 fpga platform flash in system programmable configuration prom: xcf04svo20 16 pin frc connector to select between base board toggle switch and the 26 pin frc external interface. jtag connector ( 10 pin frc connector ) for boundary scan programming. push button switch to re initialize the fpga and done led for program status indication power from the bottom board. four sets of 20 x 2 berg connectors for plugging on to the base board. each / no 1 3 bit pattern logic analyzer cpld 32 bit pattern generator and logic analyzer each / no 1 4 power supply power supply ( 5v, 1.5a, + / 12v, 100ma ) each / no 1 9 embedded systems lab 1 arm cortex m3 1768 evaluation board lpc1768 is arm cortex m3 based micro controller with 512kb flash memory and 64kb sram in system programming ( isp ) and in application programming ( iap ) capabilities. single 3.3 v power supply ( 2.4 v to 3.6 v ) . 70 general purpose i / o ( gpio ) pins with configurable pull up / down resistors, open drain mode, and repeater mode. standard jtag test / debug interface as well as serial wire debug. 12mhz crystal allows easy communication setup one on board voltage regulator for generating 3.3v. input to this will be from external +5v dc power supply through a 9 pin dsub connector piggy back module containing lpc1768 controller standard jtag connector with arm 2×10 pin layout for programming / debugging with arm jtag reset push button for resetting the controller one rs232 interface circuit with 9 pin dsub connector: this is used by the boot loader program, to program lpc1768 flash memory without external programmer. application program can also use this uart for serial communication dc motor interface with direction and speed control stepper motor interface with direction and speed control 16×2 alphanumeric lcd display on chip adc interface circuit with pot each / no 1 8 bit dac interface 4x4 key matrix connected to the port lines of the controller one external interrupt circuit with led indication two digit multiplexed 7 segment display interface interface circuit for on board buzzer, relay and led indication controlled through push button. spi interface: 2 channel adc ic with pot and temperature sensor i2c interface: nvrom ic internal pwm terminated in test point and led standard 26 pin frc connectors to connect to on board interface. a number of software examples in ‘c language’ to illustrate the functioning of the interfaces. the software examples are compiled using an evaluation version of keil4 ‘c’ compiler for arm. 2 power supply ( 5v, 1.5a, + / 12v, 100ma ) each / no 1 10 communication lab 1 frequency modulation and demodulation trainer kit af generator – generates low frequency signals of 500 hz and 5 khz to use as a modulating signal. regulated power supply – on board power supply provide +15v, 15v, +5v, 5v and current rating 150ma each. modulation – frequency modulation using xr 2206 with frequency of operation can be selected externally over a range of 0.01hz to more than 1mhz. demodulation – frequency demodulation using general purpose pll lm565. each / no 1 2 amplitude modulation and demodulation trainer kit rf generator – colpitts oscillator generates, 1 mhz frequency to use as carrier signal af generator – low frequency signal 2 khz is generated and used as the modulation signal power supply – on board power supply provide +12v, 12v and current rating 150ma each modulation – amplitude modulation using bc107 transistor ( npn ) demodulation – envelop detector using diode oa79. each / no 1 3 analog sampling and reconstruction trainer kit onboard input sinusoidal signal: 2 khz. sampling freq: 2 khz, 4 khz, 8 khz, 16 khz, 32 khz ( selectable ) variable duty cycle:10% to 90% cut off freq:3.4 khz. outputs: sampling amplifier & sample hold amplifier reconstruction: 2nd, 4th & 6th order butter worth lpf each / no 1 4 time division multiplexing and demultiplexing trainer kit ( tdm ) with power supply input sine waves: 2khz, 1khz, 500hz, 250 hz synchronization pulse generation: using ( variable 0 5v ) dc level generation of receiver clock and channel information using pll communication through three, two and single wire modes sampling rate: 32 khz reconstruction: 4 order low pass butter worth filter cut off freq: 3.4 khz, clock recovery & sync detect 2 of the fundamentals aspects using pll techniques each / no 1 5 psk / dpsk modulation and demodulation kit with power supply data bits:8 bit rz variable data with sliding switch selection carrier: on board 8 khz / 5v amplitude with 0 degree and 180 degree phase sine wave. psk modulator: using ic cd4051 ( multiplexer ) psk demodulator: carrier phase comparison differential encoder / decoder using ex or and ex nor logic dpsk modulator: using ic cd4051 ( multiplexer ) dpsk demodulator: carrier phase modulation each / no 1 6 ask / fsk modulation and demodulation kit with power supply data bits: variable data using sliding switch carrier :onboard variable frequency and amplitude sine wave bask modulator: using cd4066 ( bilateral switch ask demodulator: using ic tl084 with low pass filter we can see outputs in various test points bfsk modulator: variable carrier frequency modulation bfsk demodulator: using pll method for demodulation also we can see outputs in various test points each / no 1 7 measurement of frequency, guide wavelength, power , vswr and attenuation in microwave test bench klystron power supply klystron mount with klystron tube variable attenuator frequency meter slotted section tunable probe detector mount isolator waveguide stand ( 02 nos. ) bnc bnc cables ( 02 nos. ) cooling fan each / no 1 8 obtain the radiation pattern and measurement of directivity and fain of micro strip dipole and yagi antenna ( 1set ) yagi antenna dipole antenna antenna tripod stands ( transmitter and receiver ) microwave detector ( dc 3ghz ) signal generator 2.0 – 3.0ghz vswr meter coaxial matched loads – 50 ohms 03 nos. short adapter n ( m ) to sma ( f ) adapter sma ( f ) to sma ( f ) adapter sma ( m ) to sma ( m ) rf cable 1m length bnc cable each / no 1 9 determination of a ) coupling and isolation characteristics of microstrip directional coupler b ) resonance characteristics of microstrip ring resonator and computation of dielectric constant of the substrate c ) power division and isolation of microstrip power divider ( 1set ) ring resonator power divider branch line directional coupler parallel coupled directional coupler stripline directional coupler microwave detector ( dc 3ghz ) signal generator 2.0 – 3.0ghz vswr meter coaxial matched loads – 50 ohms 03 nos. short attenuator pad 3db attenuator pad 6db attenuator pad 10db coaxial adapter n ( m ) to sma ( f ) 02 nos. adapter sma ( f ) to sma ( f ) 02 nos adapter sma ( m ) to sma ( m ) bnc cable each / no 1 10 matlab / labview software simulation experiments : nrz, rz, and generation of eye diagram for binary polar signaling. pcm and modulation and demodulation digital modulation schemes 1. dpsk transmitter and receiver 2. qpsk ( 10 users license ) each / no 1 11 vlsi lab 1 cadence / synopsis / mentor graohics / microwind software eda tools required to carry out verilog programs and layout for vlsi circuits. ( 10 users license ) each / no 1 12 computer communication & netwoking lab 1 network simultion software qualnet 10 user license validity: 5 yrs 4 libraries qualnet is a network simulation tool to mimic the behavior of real data communication network like the internet with server pc each / no 1 13 project lab 1 basic project lab tools & instruments 1. soldering gun each / no 1 2. de soldering pump each / no 1 3. antistatic mat for 2” x 3” each / no 1 4. nose plair each / no 1 5. cutting plair each / no 1 6. sleeve remover each / no 1 7. 3 ¾ digit rishmulti 12s each / no 1 8. bread board each / no 1 9. single stand wire ( 10mtr each / no 1 10. crocodile clip with patch cord each / no 1 11. solder lead each / no 1 12.ar ps 302d dc regulated power supply with short circuit & over load protection 0 30v / 2a dual output with two digital meters each / no 1 13. hand held lcr meter each / no 1 2 mini projects assembled & tested a ) als stuprj1 smoke alarm b ) als stuprj2 heat alarm c ) als stuprj3 metal detector d ) als stuprj4 touch alarm e ) als stuprj5 electronic harmonium each / no 1 3 mini projects assembled & tested includes the following f ) als stuprj6 lead acid battery charger g ) als stuprj7 grip tester h ) als stuprj8 light operated relay i ) als stuprj9 light dimmer j ) als stuprj10 water level controller each / no 1 4 mini projects assembled & tested includes the following k ) als stuprj11 door bell / moisture sensor l ) als stuprj12 beat generator m ) als stuprj13 police siren n ) als stuprj14 linear power supply each / no 1 5 mini projects assembled & tested includes the following o ) als stuprj15 rf encoder transmitter & decoder receiver each / no 1 6 adaptor each / no 1 7 project boards for embedded segment controller boards 1.als pjt89c51ed2 ed2 project with proto board each / no 1 2.als pjt arm2148 arm project board with proto board each / no 1 3. als pjt fpga 01 fpga 3s400 project board with proto board each / no 1 4. als pjtbrd armctxm3 01 arm cortex m3 project board with proto board each / no 1 5.als pjt proto 01 proto board ( additional ) each / no 1 8 evaluation boards for study a ) als sda emb eval 03 embedded controller kit b ) power supply ( 5v, 1.5a, + / 12v, 100ma ) each / no 1 9 mini projects controller based 1. als prj / proto / 01 relay project board each / no 1 2. als prj / proto / 02 nvrom project board each / no 1 3. als prj / proto / 03 spi adc project board each / no 1 4.als prj / proto / 01 relay project board each / no 1 5. als prj / proto / 02 nvrom project board each / no 1 6. als prj / proto / 03 spi adc project board each / no 1 10 accessories for controller based projects 1.als pjtbrd / acc / 01 4 channel relay board each / no 1 2.als pjtbrd / acc / 02 4 x 7 segment display board each / no 1 3.als pjtbrd / acc / 03 4 x 4 keypad board each / no 1 4.als pjtbrd / acc / 04 6 keypad board each / no 1 5.als pjtbrd / acc / 05 2 x 16 lcd board each / no 1 6. als pjtbrd / acc / 06 8 led board each / no 1 11 technology study modules 1. als prjbrd ucxp1—01a finger print based door lock each / no 1 2.als prjbrd ucxp2 01a gps location indicator each / no 1 3. als prjbrd ucxp3 01a gsm based home security gsm module each / no 1 4.als prjbrd ucxp4 01 graphic lcd with sensors each / no 1 5.als prjbrd ucxp5 01 zigbee based wireless data acquision system ( min 2nos required for experiment ) each / no 1 6.als prjbrd ucxp6 01 rfid based access control each / no 1 7.als prjbrd ucxp7 01 bluetooth based servo motor each / no 1 12 evaluation board of vhdl kit a ) als sda cpld / fpga 02 universal base board with fpga 3s400 each / no 1 b ) power supply ( 5v, 1.5a, + / 12v, 100ma ) each / no 1 interfaces for the above a ) als nifc 01a stepper motor interface each / no 1 b ) als nifc 05a logic controller interface each / no 1 c ) als nifc 27 adc / dac interface each / no 1 d ) als nifc 17 elevator interface each / no 1 e ) als nifc 11 traffic light interface each / no 1 f ) als nifc 58 temperature and relay interface each / no 1 arm 2148 trainer kit als sda arm7 06 arm7 evaluation board each / no 1 optional : power supply ( 5v, 1.5a, + / 12v, 100ma ) each / no 1 to serial converter each / no 1 als sda arm7 07 arm7 2148 evaluation board optional : each / no 1 power supply ( 5v, 1.5a, + / 12v, 100ma ) each / no 1 usb to serial converter each / no 1 als sda armctxm3 01 arm cortex m3 evaluation board each / no 1 power supply ( 5v, 1.5a, + / 12v, 100ma ) each / no 1 usb to serial converter each / no 1 als sda armctxm3 06 arm cortex m3 1768 evaluation board each / no 1 power supply ( 5v, 1.5a, + / 12v, 100ma ) each / no 1 usb to serial converter each / no 1 13 external interfaces for arm board 1.als nifc 71 rfid interface each / no 1 2. als nifc 72 gsm interface each / no 1 3.als nifc 73 zigbee interface each / no 1 4.als nifc 74 gps co ordinator each / no 1 5.als nifc 75 bluetooth interface each / no 1 6.als nifc 76 graphic lcd interface each / no 1 7.als nifc 77 keypad and dtmf tone generator each / no 1 14 basic electrical engineering lab 1 verification of kvl and kcl for dc circuits this set consists a ) regulated dc power supply – 30v @ 2a b ) edm type analog dc voltmeters – 30v 3 nos. c ) edm type analog dc ammeters – 2a 3 nos. d ) rheostats – i ) 50 ohms / 2a ii ) 100 ohms / 2 a iii ) 150 ohms / 2 a each / no 1 2 measurement of current, power and power factor of incandescent lamp, fluorescent lamp and led lamp: and two way and three way control of lamp and formation of truth table this set consists of : screen printed polycarbonate panel board enclosed in powder coated ms frame consists of mcb, indicator, fuse, single phase digital multifunction meter with ct for direct measurement, 1 no. incandescent lamp, 1 no. fluorescent lamp and 1 no. led lamp. 2 nos of 2 way switches and 1 no. of intermediate switch with terminals for inter connection each / no 1 3 measurement of resistance and inductance of a choke coil using 3 voltmeter method this set consists of : a ) screen printed polycarbonate panel board enclosed in powder coated ms frame consists of mcb, indicator, fuse, 3 nos of digital voltmeters, 1 no. of digital ammeter, single phase auto transformer – 0 270v @ 2a. and 2a choke coil. variable dc supply of 0 200v dc @ 2a for dc motor armature supply and 220v + / 10 % @ 0.5a for field supply to study dc motor control. variable ac current supply of 0 20a ac for testing fuse and mcb. b ) rheostat – 470 ohms / 1.2a each / no 1 4 determination of phase and line quantities in three phase star / delta connected loads: this set consists of : a ) screen printed polycarbonate panel board enclosed in powder coated ms frame consists of mcb, indicator, fuse, 2 nos of ac voltmeters, 2 nos of ac ammeters. b ) three phase auto transformer 0 470v @ 6a mounted on trolley and terminals are brought out on the panel. three phase resistive load – 5 a ( per phase ) / 5 steps suitable for star and delta connection. each / no 1 5 measurement of three phase power using two wattmeter method: this set consists of : a ) screen printed polycarbonate panel board enclosed in powder coated ms frame consists of mcb, indicator, fuse, 1 no of ac voltmeter, 1 no. of ac ammeter and 2 nos of upf wattmeters. b ) three phase auto transformer 0 470v @ 6a mounted on trolley and terminals are brought out on the panel. c ) three phase resistive load – 5 a / 5 steps suitable for star and delta connection. each / no 1 6 measurement of earth resistance: digital earth resistance tester – 10 / 1000 ohms – waco make with testing kit. each / no 1 7 study of effect of open and short circuit in simple circuit: this set consists of: screen printed polycarbonate panel consists of mcb, indicator, fuse, single phase transformer – 500va, primary: 230v, secondary:115v and 2v @ 20a transformer tapping . single phase auto transformer – 2 a, digital ac voltmeter, digital ac ammeter to study open circuit voltage of transformer and short circuit current at low voltage. each / no 1 8 demonstration of cut out sections of electrical machines ( dc machines, induction machines and synchronous machines ) : this set consists of : a ) working cut section of dc shunt motor – 0.5 hp / 220v b ) working cut section of 2 and 4 pole 3 phase induction motor – 0.5 hp / 415v c ) cut section of 3 phase synchronous motor – 1 hp / 415v d ) tester, test lamp and silicon tester ( non contact type ) e ) ups demo kit – open type to observe different parts of ups – 500va each / no 1 15 computer aided building planning & drawing lab 1 desktops: computer configuration a ) processor intel i7 dual core b ) ram 8gb / 6gb c ) hard disk d ) mother board – intel chipset e ) graphics card – 1gb dedicated n vidia graphics card f ) lan g ) monitor 17” led / tft h ) keyboard i ball i ) mouse – i ball each / no 1 2 printers with scanner: hp laserjet printers a3 each / no 1 3 printers : hp laserjet printers a4 size each / no 1 4 autocadd 2022 ( 30 users license software ) each / no 1 5 projector: type of display poly silicon tft active matrix resolution brightlink 480i: 1024 × 768 pixels ( xga ... lens f= 1.80 focal length: 3.71 mm color reproduction full color, 16.77 million colors brightness brightlink 475wi: normal power consum … each / no 1 6 smart board each / no 1 7 15kva with 4hr back up ups for 30 computers each / no 1 8 lan connection for systems and printers each / no 1 16 building materials testing laboratory 1 universal testing machine with extensometer analogue cum computerized universal testing machine with following specifications a ) measuring capacity : 1000kn analogue system : i range 0 1000kn ( least count 2kn ) ii range 0 500kn ( least count 1kn ) iii range 0 250kn ( least count 0.5kn ) iv range 0 1000kn ( least count 0.2kn ) computerized system: measuring range ( kn ) : 0 to 1000kn ( least count 0.1kn ) with measurement accuracy of ±1% extensometer ( mechanical ) : range – 50mm ( least count 0.1mm ) each / no 1 2 compression testing machine analogue cum computerized compression testing machine with following specifications measuring capacity : 3000kn analogue system : i range 0 1000kn ( least count 2kn ) ii range 0 2000kn ( least count 5kn ) iii range 0 3000kn ( least count 10kn ) computerized system: measuring range ( kn ) : 0 to 3000kn ( least count 2kn ) with measurement accuracy of ±1% each / no 1 3 torsion testing machine capacity 200n mt each / no 1 4 bending testing machine each / no 1 5 shear box direct shear apparatus 6speed motorized with loading unit, housing and mould, perforated and non perforated plates, proving ring 10kn, dial gauge of 0.01 x 25mm and slotted weights each / no 1 6 izod charpy pendulum type impact testing machine capacity 170 ( izod ) / 300 ( charpy ) joules each / no 1 7 brinell hardness tester capacity 120 kgf optical magnification:35x, 70x & 140x each / no 1 8 rockwell hardness tester capacity 250 kgf each / no 1 9 vickers hardness tester capacity 120 kgf optical magnification:35x, 70x & 140x each / no 1 10 tool makers microscope : [ travel x.y axis : 50 x 50 mm, working distance : 67mm, magnification : 30 x ( 15x eyepiece x 2x object lens ) ] each / no 1 11 tiles testing machine each / no 1 12 hot air oven alu. chamber, 350x350x350mm, thermostatic ( digital each / no 1 13 digital weighing balance capacity: 30kg with 5grm accuracy each / no 1 14 fine aggregate sieve set standard is sieve set each / no 1 15 metal tray 12x12 each / no 1 16 sieve shaker motorized, with timer 0 60mins, 0.25 hp motor each / no 1 17 coarse aggregate sieve set standard is sieve set each / no 1 18 density basket as per is:2386 ( part iii ) , made of gi wire each / no 1 19 specific gravity bottles 100ml each / no 1 20 loading frame 100 tonnes capacity each / no 1 21 digital slide calipers each / no 1 22 digital screw gauge each / no 1 23 punch each / no 1 24 steel scale each / no 1 25 tamping rod of 10mm diameter each / no 1 26 1000ml glass container each / no 1 27 tamping rod of 16mm diameter each / no 1 28 tool makers microscope : [ travel x.y axis : 50 x 50 mm, working distance : 67mm, magnification : 30 x ( 15x eyepiece x 2x object lens ) ] each / no 1 29 demec gauge 200mm each / no 1 30 dial gauge 200mm each / no 1 31 digital strain gauges each / no 1 32 digital strain indicators each / no 1 33 projector type of display poly silicon tft active matrix resolution brightlink 480i: 1024 × 768 pixels ( xga ... lens f= 1.80 focal length: 3.71 mm color reproduction full color, 16.77 million colors brightness brightlink 475wi: normal power consum … each / no 1 34 smart board each / no 1 35 printers with scanner: hp laserjet printers a3 each / no 1 36 printers : hp laserjet printers a4 size each / no 1 17 engineering geology laboratory 1 streak plates each / no 1 2 knifes each / no 1 3 convex lens ( small for mineral grain size identification ) each / no 1 4 folds, faults dyke, sill, volcano, unconformity models painting on wood. each / no 1 5 250 ml measuring jar / bottles for acidic test of minerals and glass rods. each / no 1 6 projector type of display poly silicon tft active matrix resolution brightlink 480i: 1024 × 768 pixels ( xga ... lens f= 1.80 focal length: 3.71 mm color reproduction full color, 16.77 million colors brightness brightlink 475wi: normal power consum … each / no 1 7 smart board each / no 1 18 surveying practice 1 total station model sokkia cx 105 total station each / no 1 2 auto level each / no 1 3 levelling staff each / no 1 4 measuring tape 30 meters length each / no 1 5 projector type of display poly silicon tft active matrix resolution brightlink 480i: 1024 × 768 pixels ( xga ... lens f= 1.80 focal length: 3.71 mm color reproduction full color, 16.77 million colors brightness brightlink 475wi: normal power consum … each / no 1 6 smart board each / no 1 19 concrete and highway materials laboratory 1 los angels abrason testing machine as per astm / bis specification each / no 1 2 is sieve 1.7mm as per astm / bis specification each / no 1 3 steel frying pan with trowel as per astm / bis specification each / no 1 4 thermometer 110 degree celcius as per astm / bis specification each / no 1 5 thermometer 400 degree celcius as per astm / bis specification each / no 1 6 weighing balance 100kg ( 1gm least count ) capacity 2 sets as per astm / bis specification each / no 1 7 weighing balance 30kg ( 0.1gm least count ) capacity 2 sets as per astm / bis specification each / no 1 8 weighing balance 10kg ( 0.01gm least count ) capacity 2 sets as per astm / bis specification each / no 1 9 weighing balance 500gm ( 0.001gm least count ) capacity 2 sets as per astm / bis specification each / no 1 10 impact testing machine including cylinderical cup and tammping rod as per astm / bis specification each / no 1 11 thickness gauge and length gauge as per astm / bis specification each / no 1 12 bitumen specific gravity bottles ( is 1202 2002 ) as per astm / bis specification each / no 1 13 digital bitumen penetrometer as per astm / bis specification each / no 1 14 apparatus for determination of ductility test as per is 1208 2002 :briquette mould, water bath, putty knife & ductility testing machine as per astm / bis specification each / no 1 15 softening point test apparatus ( ring and ball apparatus ) , supporting stand, beaker & thermometer as per astm / bis specification each / no 1 16 pensky – martens closed tester for testing flash and fire point as per is: 1209 2002 as per astm / bis specification each / no 1 17 tar viscometer apparatus ( is: 73:2006 ) heating pan, as per astm / bis specification each / no 1 18 marshall compaction apparatus to the requirements of aashto:245 electrical loading unit, compaction pedestal, breaking head assembly, flow meter, load transfer bar, specimen moulds 100 mm diameter with base plat, collars, specimen extractor, compaction hammer 4.53 kg x 457 mm fall and marshall moulds with collars 40 no.s as per astm / bis specification each / no 1 19 semi automatic marshall specimen compactor with hammer weight 4.53kg and 457 mm fall complete sets as per astm / bis specification each / no 1 20 gauging trowel as per astm / bis specification each / no 1 21 blaines apparatus ( sets ) conforming to ( is 4031 part 2 ) as per astm / bis specification each / no 1 22 auto clave as per astm / bis specification each / no 1 23 le chatliers apparatus ( sets ) as per astm / bis specification each / no 1 24 hot plate as per astm / bis specification each / no 1 25 cube moulds ( 70.6mm ) as per astm / bis specification each / no 1 26 mortar cube vibrating machine as per astm / bis specification each / no 1 27 pulse velocity test apparatus ( ( portable ultrasonic non destructive digital interface ) , two transducer leads, reference bar ) as per astm / bis specification each / no 1 28 flexure testing machine, as per astm / bis specification each / no 1 29 compaction testing equipment with 1000cc moulds, 1.5metre square steel tray, compaction standard proctor hammer 2.85 & 4.89 as per astm / bis specification each / no 1 30 california bearing ratio testing machine with energy level 1, 2 & 3 moulds 15 no.s complete sets and compaction hammer of 4.89kg 2 no.s sets as per astm / bis specification each / no 1 31 is sieves ( 90mm, 75mm, 63mm, 45mm, 37.5mm, 26.5mm, 25mm, 22.4mm, 20mm, 19mm, 16mm, 13mm, 13.2mm, 12.5mm, 11.2mm, 10mm, 9.5mm, 6mm, 6.7mm, 5.6mm, 4.75, 3.35mm, 2.8mm, 2.36mm, 1.18 mm, 710, 600, 425, 300, 180, 150, 75, 90, 53 microns along with lid and pan ( 3sets ) as per astm / bis specification each / no 1 32 90 micron is sieve as per astm / bis specification each / no 1 33 slump cone with tammping rod ( sets ) as per astm / bis specification each / no 1 34 vee bee consistometer apparatus ( sets ) as per astm / bis specification each / no 1 35 compaction factor appartatus ( sets ) as per astm / bis specification each / no 1 36 concrete cube moulds ( 150 x 150 x 150 mm ) as per astm / bis specification each / no 1 37 cylinders ( 150 mm dia x 300 mm height ) as per astm / bis specification each / no 1 38 beam moulds ( 150 x 150 x 700 mm ) as per astm / bis specification each / no 1 39 concrete permeability apparatus, 3 cell for 150mm cube with compressor ( sets ) as per astm / bis specification each / no 1 40 plastic measuring jar 1000 ml capacity as per astm / bis specification each / no 1 41 sieve shaker, digital as per astm / bis specification each / no 1 42 flow table apparatus as per astm / bis specification each / no 1 43 leather hand gloves as per astm / bis specification each / no 1 44 fibre drums 200 litre, 100litre capacity as per astm / bis specification each / no 1 45 concrete cube vibration machine as per astm / bis specification each / no 1 46 pan mixer mixing capacity: 40 ltrs overall dimension: 910mm x 875mm x 1250mm motor : 2 hp drum rpm : 24 rpm power supply: 440v frequency: 50hz as per astm / bis specification each / no 1 47 vicat apparatus ( conforming to is: 5513 1996 ) with plunger and needle as per astm / bis specification each / no 1 48 stop watch, funnel, trowel, graduated glass cylinders, mixing tray, platens as per astm / bis specification each / no 1 49 le chatelier flask of 250 ml as per astm / bis specification each / no 1 50 specific gravity bottle for cement / pycnometer of 100 ml as per astm / bis specification each / no 1 51 angularity number metal cylinder, tamping rod, balance, metal scoop as per astm / bis specification each / no 1 52 compression testing machine capacity of load up to 40tonnes as per astm / bis specification each / no 1 53 rebound hammer instrument with abrasive stone as per astm / bis specification each / no 1 54 ( l box test apparatus ( l box, measuring scale ) as per astm / bis specification each / no 1 55 u box test apparatus with measuring scale as per astm / bis specification each / no 1 56 j ring test apparatus with slump cone ( astm c1621 / c1621m 06 ) as per astm / bis specification each / no 1 57 v funnel test apparatus ( v funnel, container ) as per astm / bis specification each / no 1 58 slump flow test apparatus ( astm c 1611 / c 1611m 05 ) with set for self compacting concrete ( abrams cone, baseplate ( 900x900mm ) , rule, weighted collar ) as per astm / bis specification each / no 1 59 steel cylinder with open ends, cylindrical measures, tamping rod for aggregate crushing test as per astm / bis specification each / no 1 60 digital oven 600x600x600mm, 224hr, 2.5kw 3shelves 5 c 250 c power 220 volt each / no 1 20 software application laboratory 1 etabs 2021 stadd pro v 22sap 2021, safe v 19 license software 30 users each / no 1 2 computers – desktops computer configuration a ) processor intel i7 10th gen b ) ram 12gb c ) hard disk 1tb d ) mother board – intel chipset e ) graphics card – 2.5gb dedicated n vidia graphics card f ) lan g ) monitor 17” led h ) keyboard i ball i ) mouse – i ball each / no 1 3 printers with scanner hp laserjet printers each / no 1 4 projector type of display poly silicon tft active matrix resolution brightlink 480i: 1024 × 768 pixels ( xga ... lens f= 1.80 focal length: 3.71 mm color reproduction full color, 16.77 million colors brightness brightlink 475wi: normal power consum … each / no 1 5 smart board each / no 1 6 printers with scanner: hp laserjet printers a3 each / no 1 7 15 kva 3hr back up ups for computer each / no 1 8 lan connection for systems and printers each / no 1 21 environmental engineering laboratory 1 nephelo meter turbidity meter as per astm / bis specification each / no 1 2 uv vis spectrophotometer model: xd 7500, make: lovibond germany each / no 1 3 ph meter with ph & orp electrode model: ph 700 make: eutech each / no 1 4 bod incubator model: bio bi 104a, make: biocare each / no 1 5 cod thermoreactor 24 places / holes make: tintometer ( lovibond ) each / no 1 6 cod digestion vials, high range, pk / 25 each / no 1 7 autoclave each / no 1 8 centrifuge each / no 1 9 optional item auto lpg shut off system for flame photometer each / no 1 10 optional item li filter each / no 1 11 optional item ca filter each / no 1 12 optional item auto ignition each / no 1 13 conductivity meter benchtop each / no 1 14 muffle furnace each / no 1 15 hot air oven each / no 1 16 analytical balances– internal calibration each / no 1 17 flocculator ( jar test apparatus ) each / no 1 18 student monocular each / no 1 19 electric bunsen burner each / no 1 20 referigerator each / no 1 21 hot plate each / no 1 22 3362 – all glass double distillation unit, with borosilicate each / no 1 23 colony counter – digital – desk model each / no 1 24 portable dissolved oxigen meter with optical do electrode each / no 1 25 imhoff cones each / no 1 26 chlorine test kit each / no 1 27 magnetic stirrers with hot plate 2 lts each / no 1 28 water bath rectangular ( double walled ) each / no 1 29 3082 desiccators, with cover and porcelain plate each / no 1 30 rotary shaker each / no 1 31 desktop computer withi7, 16gb, 2gb graphics 2tb hdd each / no 1 32 laser jet printer and scanner each / no 1 33 portable ph / conductivity meter each / no 1 34 dc power supply each / no 1 35 noise dozi meter each / no 1 36 ambient air quality analysizer kit each / no 1 glasswares each / no 1 37 gooch crucibles each / no 1 38 funnel each / no 1 39 beakers capacity: 25 ml each / no 1 40 beakers capacity: 50 ml each / no 1 41 beakers capacity: 100 ml each / no 1 42 beakers capacity: 250 ml each / no 1 43 beakers capacity: 2000 ml each / no 1 44 4980 flask , erlenmeyer, conical narrow mouth capacity: 50 ml each / no 1 45 4980 flask , erlenmeyer, conical narrow mouth capacity: 100 ml each / no 1 46 4980 flask , erlenmeyer, conical narrow mouth capacity: 250 ml each / no 1 47 4980 flask , erlenmeyer, conical narrow mouth capacity: 500 ml each / no 1 48 4980 flask , erlenmeyer, conical narrow mouth capacity: 1000 ml each / no 1 49 conical flask with interchangeable stopper capacity: 50 ml each / no 1 50 conical flask with interchangeable stopper capacity: 100 ml each / no 1 51 conical flask with interchangeable stopper capacity: 250 ml each / no 1 52 pipettes capacity: 1 ml each / no 1 53 pipettes capacity: 2 ml each / no 1 54 pipettes capacity: 5 ml each / no 1 55 pipettes capacity: 10 ml each / no 1 56 pipettes capacity: 25 ml each / no 1 57 2124 burettes, each / no 1 58 burette stand ( metal ) size:8x5x24 each / no 1 59 bod bottles , 300ml each / no 1 60 china dishes – small ( 50mm ) each / no 1 61 petri dishes size 80x17mm each / no 1 62 reagent bottle capacity: 250 ml each / no 1 63 reagent bottle capacity: 500 ml each / no 1 64 reagent bottle capacity: 1000 ml each / no 1 65 1519 bottle reagent, amber, wide mouth, graduated, with screw cap and pouring ring each / no 1 66 nesselers tube each / no 1 67 measuring cylinders capacity: 100 ml each / no 1 68 measuring cylinders capacity: 5 ml each / no 1 69 measuring cylinders capacity: 10 ml each / no 1 70 measuring cylinders capacity: 25 ml each / no 1 71 measuring cylinders capacity: 50 ml each / no 1 72 measuring cylinders capacity: 100 ml each / no 1 73 spatula 6” each / no 1 74 magnetic beads each / no 1 75 cod vials each / no 1 76 vials stand each / no 1 77 test tube holder each / no 1 78 laboratory tray each / no 1 79 beaker holder each / no 1 80 projector type of display poly silicon tft active matrix resolution brightlink 480i: 1024 × 768 pixels ( xga ... lens f= 1.80 focal length: 3.71 mm color reproduction full color, 16.77 million colors brightness brightlink 475wi: normal power consum … each / no 1 81 smart board each / no 1 82 printers : hp laserjet printers a4 size each / no 1 22 computer aided detailing of structures 1 desktops: computer configuration a ) processor intel i7 dual core b ) ram 8gb / 6gb c ) hard disk d ) mother board – intel chipset e ) graphics card – 1gb dedicated n vidia graphics card f ) lan g ) monitor 17” led / tft h ) keyboard i ball i ) mouse – i ball each / no 1 2 printers with scanner and copier: hp laserjet printer a3 each / no 1 3 printers : hp laserjet printers a4 size each / no 1 4 autocadd 2021 ( latest version ) ( 30 users licensed software ) each / no 1 5 projector:type of display poly silicon tft active matrix resolution brightlink 480i: 1024 × 768 pixels ( xga ... lens f= 1.80 focal length: 3.71 mm color reproduction full color, 16.77 million colors brightness brightlink 475wi: normal power consum … each / no 1 6 lan connection for systems and printers each / no 1 7 server system for 30 computers each / no 1 8 antivirus for all systems total av antivirus pro each / no 1 9 15kva with 3hr back up for 30 computers each / no 1 23 geotechnical engineering laboratory 1 pycnometer as per is 2386 ( p iii ) 1kg glass jar with brass cone, locking ring and rubber seal. each / no 1 2 density bottle, 100 ml each / no 1 3 digital hot air oven ( temperature controlled ) dimensions 600 x 600x 600 mm, 224 ltrs, 2.5kw, 3 shelves, range 5°c above ambient to 250°c maximum, accuracy + / 2°c, power supply 220 volts each / no 1 4 digital weigh balance 0.5kg capacity with 0.001g accuracy each / no 1 5 digital weigh balance 5kg capacity with 0.01g accuracy each / no 1 6 any suitable non corrodible air tight container moisture content determination of soil samples each / no 1 7 desiccator with any suitable desiccating agent. convenient size is one about 200 to 250mm in diameter containing anhydrous silica gel. each / no 1 8 speedy moisture meter as per as per is 2720 ( p ii ) , astm d 4944 aashto t 217 wooden carrying case consisting of pressure vessel with clamp for sealing cap, rubber sealing gasket, pressure gauge in percentage moisture content 0 25% or 0 50% on the wet weight basis ( 6 gm ) counter poised balance for weighing samples, scoop for measuring calcium carbide, bottle of calcium carbide ( 500gm ) , a set of 4 steel balls and a cleaning brush. each / no 1 9 infrared moisture meter as per astm d 4944 aashto t 217 suitable for operating on 220 v, 50hz, single phase, ac supply. each / no 1 10 soil testing kit consists of : 12 thick walled test tubes with rubber bungs. 1 tube cleaning brush. 1 bottle of barium sulphate ( 100gm ) 1 bottle of soil indicator ( 100gm ) 1 bottle of distilled water ( 500gm ) 1 spatula. 1 colour chart, range 4.0 to 8.0 ph in 0.5 ph steps. complete with carrying case each / no 1 11 core cutter cylindrical core cutter made of gun metal, 100 mm dia x 130 mm long steel dolly, 25 mm high and 100 mm dia fitted with a lip, to enable it to be located on top of the core cutter rammer with steel rod each / no 1 12 sand replacement kit 1. small sand pouring cylinder, 3. cylindrical calibrating container, 4. cylindrical steel core cutter, 5. metal tray with hole conforming to is 2720 part 28 , 100mm dia each / no 1 13 soil hydrometer as per astm d 422 aashto t 88, bs 1377 2.used for grain size analysis of soils where more than 10% of the material will pass through 75 microns b.s. sieve. manufactured from clear transparent glass having uniform clarity throughout the upper end on which density scale is engraved. the scale range is 0.995 to 1.030 0 density ( gms. / cc ) at 27oc smallest division on the scale is 0.0005. each / no 1 14 high speed stirrer is 2720 ( part iv ) this is for mechanical analysis and also other laboratory applications for stirring speed approximately 4000 r.p.m. under load. a dispersion cup is supported on a rest on the stand of the stirrer and has a removable baffle. for operation on 230v a.c. supplied with dispersion cup or baffle cup. each / no 1 15 standard test sieves 20cm diameter, ( spun brass frame ) as per is :460 ( par t i, ii ) 1978, size available: 4.75mm, 2.80 mm, 2.36 mm, 3.00 mm, 1.70 mm, 1.18 mm, 180 micron, 150 micron, 125 micron, 90 micron, 75 micron, 425 micron, 300 micron, 45 micron. lid and receiver for 200 mm dia sieves, made of brass. each / no 1 16 standard test sieves 30 cm diameter, ( g.i. sheet frame ) as per is :460 ( par t i, ii ) 1978 sizes available : 20mm, 12.5mm, 10mm, 4.75mm, 2.36mm, 1.18mm, lid & receiver in g.i. sheet frame for 300mm dia. each / no 1 17 mechanical seive shaker the shaker should accommodate upto 7 nos. sieves of dia 200 or 300mm, 450mm suitable operation of 230 v a.c. single phase. electrical sieve shaker with 16 adapter each / no 1 18 casagrande liquid limit apparatus complete with casagrandes grooving tool and gauge block conforming to is 2720 part 05 each / no 1 19 cone penetration apparatus with penetration test cone and test cup ( 55 mm dia x 40 mm deep ) conforming to is 2720 part 05 each / no 1 20 plastic limit set consists of one each : i ) porcelain evaporating dish, ii ) shrinkage dish, iii ) glass cup, iv ) perspex plate with three metal prongs, v ) flexible spatula 100mm, vi ) glass cylinder, vii ) 25ml x 1ml, supplied without mercury each / no 1 21 shrinkage limit set consists of one each : i ) porcelain evaporating dish, ii ) shrinkage dish, iii ) glass cup, iv ) perspex plate with three metal prongs, v ) flexible spatula 100mm, vi ) glass cylinder, vii ) 25ml x 1ml, supplied without mercury each / no 1 22 linear shrinkage mould bs 1377 2 a simple mould which is filled with the soil under test. this is then dried and the resulting decrease length of the specimen measured is expressed as the linear shrinkage. it is 25mm dia. x 12.5mm height x 140mm length. each / no 1 23 standard proctor compaction moulds with mould 150mm internal dia x 127.3mm height, 2250ml volume ( gun metal ) , rmmer should be 2 .8 6 k g x 300m m fall, for light compaction test as per is 2720 part vii, each / no 1 24 modified proctor compaction apparatus mould mould 150mm internal dia x 127.3mm height, 2250ml volume ( gun metal ) rammer weight 4 .8 9 k g x 450mm fall, for high compaction test as per is 2720 part viii each / no 1 25 universal permeability test apparatus as per is 2720 ( part xbii ) , permeameter mould of non corrodible material ( gun metal ) having a capacity of 1000 ml, with an internal diameter of 100mm and internal effective height of 127.3mm with 0.1 mm thick.three glass stand pipes a stand with nine glass tubes of 6mm, 10mm, 20mm, 25mm, 40mm, 50mm, 60mm, 70mm, 75mm, bore tube is provided with over flow arrangement for constant head tests. the remaining tubes are used for falling head test. each / no 1 26 unconfined compression tester proving ring type ( hand operated ) as per is: 2720 ( part 10 ) :1991, load frame, hand operated, capacity 50 kn ( 5, 000 kgf ) , mould, 100mm dia x 127.3mm height ( 1, 000ml volume ) with, base plate and collar., proving ring, with integral boss, high sensitivity 2.5kn ( 250 kgf ) capacity, perforated swell plate, 100mm dia x 16mm thickdial gauge , 25mm travel, 0.01mm least count lid & receiver in g.i. frame for 300mm dia x 450mm dia sieves, spencer, 100mm dia x 12.7mm thick, pair of porous stones, 100mm dia x 12.7mm thick, load transfer bar, steel ball soaking tank, 250mm dia x 210mm high. each / no 1 27 direct shear apparatus ( motorized ) as per is: 2720 ( part viii ) , astm d 3080 for determination of the direct shear strength of soils on specimen size 60 mm x 60 mm x 25 mm. specification: the apparatus comprises of the following: loading unit: supplied with load yoke with direct and lever system for applying load. normal stress capacity 8kg / sq.cm. shear box assembly: comprising direct shear box in two halves for a square specimen size 60 x 60 x 25 mm one pair of plain gripper plates, one pair or perforated gripper plates, one pair or porous stones, one top loading pad. shear box housing: accommodates the direct shear box assembly. complete with two ball roller strips. specimen cutter:for cutting 60 x 60 x 25 mm specimen from larger samples. set of weights to give a normal stress of 3 kg / sq.cm. essential accessories: high sensitivity compression ring cap 200 kg one consolidation dial gauge 0.01 mm x 25 mm and one strain dial gauge 0.01 mm x 25 mm and one strain dial gauge 0.01 mm x 25 mm. optional extras: additional set of weights to give a normal stress of 5 kg / cm2 soil sampler for 60 mm x 60mm specimen and test from pad of 50. spares: porous stone for 60 mm x 60 mm size sample available in pairs. each / no 1 28 triaxial test apparatus as per is 2720 ( part xii ) , consisting of load frame, triaxial cell, dial gauge, proving ring & lateral pressure assembly, triaxial cells transfer bar ( loading ram ) passes through linear bearing making it almost friction free. base has four no volume change valves one each for back pressure / pore pressure, confining pressure and top drainage.one plastic drainage tube.accesories sheath stretcher, porous stones, plain discs, top drainage cap, rubber membranes ( pack of 10 ) and o rings. loading frame 50 kn capacity, rate of strain: 0.00001 9.9999 mm / min, pressure controller for confining pressure upto 1700 kpa, lateral pressure assembly: consists of a pressure chamber which has a flanged top 2 cap fitted with a 10 kg / cm . pressure gauge and a valve for pumping in air. water inlet and drain cock are fitted to the chamber. 2 the foot pump supplied easily develops a pressure of 10 kg / cm2 complete with connecting pressure hose. with electricaly operated maching with digitalstrain gauge each / no 1 29 cbr test apparatus motorized as per is : 9669, is : 2720 ( part xvi ) load frame 50kn capacity, a mould of 150 mm. i.d. x 175 mm. high with clamping lugs complete with extension collar and perforated base plate made of gun metal. a cutting collar to fit mould body. a penetration piston assembly of 50 mm. diameter and a bracket for the dial gauge. a perforated swell plate of 148 mm. diameter with an adjustable stem and lock nut. a circular spacing disc of 148 mm. diameter x 47.7 mm. high complete with a removable `t handle. a metal tripod for the dial gauge. dial gauge 2 in. travel & 0.001 in division for cbr penetration measurement, having provision for increasing the dial gauge plunger length. cbr essential : proving ring 10 kn capacityx 0.01 kn / div sensitivity / readability, dial gauge 0.01 mm. x 25 mm. travel. spares: rammer 2.6 kg & 4.89 kg.cbr mould complete with extension collar and perforated base plate, perforated swell plate with adjustable stem and lock nut, solid base plate, cutting collar, penetration piston assembly, metal tripod for dial gauge, circular spacer disc, surcharge weight ( annular ) 2.5 kg, surcharge weight ( slotted ) 2.5 kg each / no 1 30 swell test apparatus load frame, hand operated, capacity 50 kn ( 5, 000 kgf ) , mould, 100mm dia x 127.3mm height ( 1, 000ml volume ) with, base plate and collar., proving ring, with integral boss, high sensitivity 2.5kn ( 250 kgf ) capacity, perforated swell plate, 100mm dia x 16mm thickdial gauge , 25mm travel, 0.01mm least count lid & receiver in g.i. frame for 300mm dia x 450mm dia sieves, spencer, 100mm dia x 12.7mm thick, pair of porous stones, 100mm dia x 12.7mm thick, load transfer bar, steel ball soaking tank, 250mm dia x 210mm high. each / no 1 31 consolidation app. ( three gang ) as per is 2720 ( part xv ) , is 12287, bs 1377, astm d 2435, loading unit, maximum capacity 20kg / cm.sq. having a loading yoke connected to a lever arm with a counter balancing adjustment and having a lever ratio of 1:1 the whole assembly being mounted on a sturdy steel frame stand. the loading unit is so designed that it can be used for consolidation cells of different diameters as well as different dia floating ring type consolidation cells. fixed ring type consolidometer ( odeometer ) cell assembly for testing 60mm dia x 20mm thick specimen comprising: fixed ring for specimens 60mm dia x 20mm thick with guide ring. top and bottom porous stones for 60mm dia specimen. perforated pressure pad, channeled base with water inlet and gasket flanged water jacket, water reservoir with plastic tube and pinch cock. set of weights to give a pressure of 10kg / cm.sq. on 60mm dia specimen, comprising : 7 nos. 0.05 kg / cm .sq., 5nos. 0.1 kg / sq.cm., 6nos. 0.5kg / sq. cm., and 5 nos. 1.0 kg / sq.cm. supplied complete as above but without dial gauge. dial gauge 0.002 mm x 10mm. extension piece, 40 mm long, consolidation test forms pad of 50 for one dimensional consolidation. each / no 1 32 vane shear apparatus as per is 2720 ( part 30 ) 1980. consists of a torque head adjustable in height by means of a lead screw rotated by a drive wheel to enable the vane to be lowered into the specimen. rotation of the vane is by means of a hand wheel which operates a worm gear arrangement turning the upper end of a calibration torsion spring, vane dia, rod dia, vane size & vane height are as per is specifications. the vane shall consist of 4 blades each fixed at 90 degrees to the adjacent blades. the vane blades shall be welded together suitably to a central rod, the maximum diameter of which should preferably not exceed 2.5mm in the portion of the rod which goes into the specimen for the test.the vane shaft is attached through the hollow upper shaft to a resettable pointer, which indicates the angle indicates the angle of torque on a dial graduated in degree the dial reading multiplied by spring factor gives the torque a container for soil sample is also supplied & a sampling tube of 38mm. i.d. & 150mm long can also be used as container . supplied with set of four springs, one each of approx. 2 kgs / cm sq., 4kgs / cm sq., 6 kgs / cm sq. & 8kgs / cm sq. complete as above in a wooden carrying case each / no 1 33 relative density test as per is 2720 ( part xiv ) , the equipment consists one each of: vibratory table, with a cushioned steel vibrating decks about 75cm x 75cm. it has a frequency of approximately 3600 vibratory table, minute under a 11.5kg load. amplitude is variable in between 0.65mm in step of 0.05 to 0.25mm, 0.25 to 0.45 mm and 0.45 to 0.65mm. suitable for operations on 415v, three phase supply. cylindrical metal unit weight mould, 3000ml. capacity.guide sleeve with clamp assembly. surcharges base plate for mould. handle for surcharge base plate. surcharge weight. the total weight together with surcharge base plate and handle is equipment to 140 kg. / sq. cm. for mould. cylindrical metal unit weight mould 15000 ml. capacity. ( total weight together with the above mould & surcharge weight is equivalent to 140 kg. / sq. cm ) dial gauge 0.01mm x 50mm travel. extension piece 25mm for dial gauge. each / no 1 34 proctor needles ( spring type ) as per astm d 1558 the instrument consists of a needle attached to a spring loaded plunger, the stem of which is calibrated to read 0 to 40 kg division. long stem is graduated at every 12.5mm to read depth of penetration and for use with needles of larger areas. the small penetration stem is also graduation in 12.5mm division and is used with needles of smaller areas. needle points one each of 0.25, 0.5, 1.0, 1.5, 2.0, 3.5 and 6.0 sq cm. and one tommy pin is supplied. complete as above in a wooden carrying case. each / no 1 35 pore pressure apparatus 10kg / cm2 the apparatus consists of a panel for wall mounting on which are fitted 1.0 to 10kg / cm sq x 0.1kg cm. sq. a pressure gauge, bourdon tube type 15 cm dia.glass u tube manometer , 50ml burette for measuring the volume change in the soil specimen. pressure pump fitted with four sleeve packed valves, operated by means of a hand wheel on the end of the piston rod which is threaded through the pump cap and gives a smooth, fine adjustment of pressure. copper coil and water reservoir is fitted on board with complete stand assembly. the unit is tested against leaks up to 10kg / cm sq. each / no 1 36 split spoon sampler as per is 2131 1963, is 9640 1980 the sampler is made from a steel tube split length wise & held together by a head fitted with a ball check valve & a hardened steel shoe in size cutting edge of 35mm dia. the sampler is 35mm i.d. & 50.8mm in outer dia & 508mm long. one adopter to connect a type drill rods is also to be supplied. each / no 1 37 standard penetration test set as per is 2131, is 9640 consist of three metal pipe legs approximately 5 mtr. long connected by a tie bolt each leg is made up of two parts for ease of transportation complete with one pulley one leg has building ladder each / no 1 38 drop hammer and guide pipe weight 65 kg. complete with two end caps to give a free fall of 75cm the drop hammer each / no 1 39 dynamic cone penetration test consists of 8 kg weight having a drop of 575 mm, fitted to the end of the shaft is a 20 mm diameter cone. with the standard dcp measurements can be made down to a depth of approximately 850 mm. each / no 1 40 static cone penetrometer, 30kn ( 300kgf ) capacity, hand operated consists of penetration cone, steel 60 angle 10cm base area with friction jacket one mantle tube, non uniform , 36mm od at the two ends and reduced dia in between with sounding rod working length 1mfifteen. load measuring head, with automatic cut off valve and oil can, without pressure gauge one pressure gauge, 0 60kg / cm 2 pressure gauge, 0 160kg / cm one 06 ) screw anchor , with bolt four anchor driving handle one t rod one spanner one extension pipe 0.5m long for anchor driving handle four each / no 1 41 auger posthole type posthole type: ( a ) 100mm dia screw type: ( a ) 38mm, ( c ) 50mm ( c ) 100mm dia extra: extension rod 1 meter length with threading at both ends and couplings, set of two spanners and tee piece. each / no 1 42 sampling tubes in the relieved type of tube, the internal diameter is relieved by about 0.5mm ( inside clearance 2% ) beyond approx. 19mm length from the cutting edge of the tube. unrelieved type of 150mm dia, each / no 1 43 projector type of display poly silicon tft active matrix resolution brightlink 480i: 1024 × 768 pixels ( xga ... lens f= 1.80 focal length: 3.71 mm color reproduction full color, 16.77 million colors brightness brightlink 475wi: normal power consum … each / no 1 44 smart board each / no 1 45 printers : hp laserjet printers a4 size each / no 1 24 research laboratory 1 2000 kn loading frame each / no 1 2 hydraulic jacks – 1000 kn and 2000 kn, low capacity ( 100 kn and 30 kn ) mechanical jacks each / no 1 3 load cell with digital load indicators – 500 kn, 1000 kn and 2000 kn each / no 1 4 universal testing machine ( 600 kn capacity ) each / no 1 5 portable high speed 4 channel data acquisition system with filters and supporting software and note book pc each / no 1 6 seismic accelerometers with accessories – each / no 1 7 a ) digital demec gauges , each / no 1 b ) digital dial gauges mechanical strain gauges each / no 1 8 4 channel high speed usb supported data acquisition system with filters and software each / no 1 9 seismic accelerometers ( high sensitivity icp type ) with accessories each / no 1 10 finite element analysis package – static and dynamic analysis with linear and non linear analysis modules each / no 1 11 shock table testing facility ( 4.2m x 3.5m ) with a 1400.0kg mass pendulum impacting device each / no 1 12 computerized servo controlled compression testing machine, 2000.0kn capacity, specially designed for testing of masonry prisms each / no 1 25 elements of mechanical engineering 1 sectional working model of 2 stroke petrol engine each / no 1 2 sectional working model of 4 stroke petrol engine each / no 1 3 francis turbine model each / no 1 4 pelton wheel turbine model each / no 1 5 kaplan turbine model each / no 1 6 centrifugal pump actual cut section each / no 1 7 vapor compression refrigeration system demo model each / no 1 8 vapor absorption refrigeration system demo model each / no 1 9 gear box demonstration model each / no 1 10 demo model of open and cross belt drives each / no 1 11 robot joints and links ( demo purpose ) each / no 1 12 air conditioning system ( demo model ) each / no 1 26 chemistry laboratory 1 potentiometer ( make: systronics 335 ) high quality precision instrument digital mode designed to take care of mv measurements in chemical laboratories. minimum control on front panel and ease of operation make it handy in routine analysis. precision ensured using very low temperature co efficient components, latest ic regulators, very high input impedance op amps and lsi circuits. millivolt range : 0 to + / 1999 mv, slope correction : 80% to 110%, resolution : 1 mv in mv mode, repeatability : + / 1mv + / 1 digit for mv, temperature compensation: 0 to 100 °c, digital display: 3½ digit red led seven segment, power : 230 volts + / 10% 50 hz, 10 va. ( with decimal point ) . accessories: platinum electrode and calomel electrode, stand and clamp & instruction manual. each / no 1 2 colorimeter ( make: systronics ) photo electric colorimeter digital model, used for various calorimetric analysis, easy to operate accurate and reliable instrument. colorimeter operated by passing white light sequentially through an optical colour filter, a fixed opening, and a test tube containing an unknown solution whose concentration needs to be determined. the transmitted light from the sampler is then detected by a photo cell and displayed. the display is calibrated directly in optical density. specification: wavelength : 400 to 700 nm selected b filters mounted on a turret light source : 6 volt led, detector: encased spill proof selenium photo cell display: 3 digit, calibrated directly in optical density, resolution: 0.01 in o.d standard : turret mounted filters, accessories four test tubes, cuvettes with stand, instruction manual. each / no 1 3 conductometer ( make: systronics –mk 509 ) digital model for routine measurement of conductivity of various electrolytes. the instrument using the state of art ic technology and consuming very little power. source frequency ( 100 hz or 1 khz ) gets automatically in the appropriate range. specification: source frequency: 100 hz or 1 khz automatically selected. range: 0 to 200 ms in 5 ranges, accuracy : + / 1 digit indication : 2 ½ digit led display, conductivity cell : 1 cell constant cell compensation : 0.9 to 1.1, power requirement: 230 volt, 50 hz + / 10% standard accessories: 1 ) conductivity cell ( 1.00 c.c + / 10% ) , 2 ) stand & clamp, 3 ) instruction manual. each / no 1 4 ph meter ( make: systronics ) digital model, high precision type for routine chemical analysis work in the laboratory having latest technology ic regulators and lsi circuits. housed in rust proof injection moulded cabinet. specification: ph range : 0 to 14 ph, slope correction : 80% to 110% resolution : 0.01 ph, repeatability : + / 0.01 ph + / 1 digit for ph standardization range: + / 2 ph, temperaturecompensation: 0 to 100 ° c display : 3 ½ digit lcd 7 segment with automatic polarity & decimal point power : 230 volts + / 10% 50 hz, 10va. accessories: combined electrode, stand & clamp and instruction manual. each / no 1 5 aquarium motor ( fish aquarium motor ) jp 700g multi function submersible pump excellent internal filter with pump for small aquariums. recommended for tropical set up only. not suggested for planted tank or marine set up, model : jp 700g, voltage : 110v / 220v / 240v, frequency : 50hz / 60hz power : 12w, h max : 1.2m output : 650h, weight 0.40kg dimensions : 90*51*100mm each / no 1 6 ostwald’s viscometer size: 120x1 mm ( length x internal diameter ) overall height : 237 mm, material : borosil glass each / no 1 7 digital stop clock stainless steel with powder coated paint, digital model, high precision type for routine chemical analysis work in the laboratory. housed in rust proof injection moulded cabinet. each / no 1 8 thermometer glass thermometer with accurate readings. 100°c thermometer = 5 nos 250°c thermometer = 5 nos each / no 1 9 1. calomel electrode ( suitable for systronics 335 ) each / no 1 2. platinum electrode ( suitable for systronics 335 ) each / no 1 3. conductivity cell ( suitable for systronics –mk 509 ) each / no 1 4. glass electrode ( suitable for systronics 335 ) each / no 1 10 computer ( desktop ) make: dell ( inspiron, ultra processor, 7g ) each / no 1 11 printer make: hp 1020 each / no 1 12 projector make: benq each / no 1 27 research laboratory 1.c programming laboratory 1.computers ( wi fi enabled ) computers:7thgeneration corei5 / i7, 8gb ram, 1tb hdd, 2gb graphics, 23.8 fhd windows 10 all in one desktop pc with wi fi enabled each / no 1 2.server computer higher end specifications each / no 1 3.laser printers hp laser jet pro m1210 multifunction printer series each / no 1 4.ups and batteries 10 kva – ups each / no 1 5.batteries rack capacity of 20 to 25 batteries each / no 1 6.network printer hp jet 4240n network ready laser printer each / no 1 7.networking for 20 nodes cat6 utp cable ( box of 305 mtrs ) , 24 port ethernet networking switch – sr224 cisco, i / o with smb, jack panel – 24 ports cat6 patch cable ( 3 mts ) , rj 45 connectors, 1” flexible pipe per runnining mtr, 2” flexible pipe per running mts, networking rack each / no 1 8.air conditioners for labs centralized ac with duct system each / no 1 9. projectors dell 1510x each / no 1 2.analog and digital electronics lab / microcontroller lab arm / 7tdmi / lpc2148 kit including all interface and accessoreies arm / 7tdmi / lpc2148 kit including all interface and accessoreies each / no 1 patch cords patch cords each / no 1 cro probes cro probes each / no 1 pcb spring board pcb spring board each / no 1 ics: ics: 555 ua741, 7400, 7402, 7404, 74138, 74151 7490, 7495, 7486, 7410, 7420, 7408, 7432, 7410, 7490, 7476 each / no 1 resistors: 100k, 10 k, 1k, 270 ω, 22k, 4.7 k, 15k, 7 k, 5k, 33 k, 6.8 k, 3.3 k, 2.2 k, 90 k, 470 ω, 8.2 k, 47 k, 1.8 k, 10 k , potentiometer 90k, 20k resistors: 100k, 10 k, 1k, 270 ω, 22k, 4.7 k, 15k, 7 k, 5k, 33 k, 6.8 k, 3.3 k, 2.2 k, 90 k, 470 ω, 8.2 k, 47 k, 1.8 k, 10 k , potentiometer 90k, 20k each / no 1 capacitor:1 uf, 0.47 uf, 0.01 uf, 0.1 uf, dc supply: +5 volts 1a, ±12 volts 500 ma socket: 5 nos 16 / 20 pin zif socket bread board: 1 nos 680 tie points logic i / p: 16 nos toggle switches for inputs logic o / p: 16 nos high bright leds for outputs ttl clock: 1hz, 10hz, 100hz, 1 khz, 10 khz display: 2 nos 7segment display mono pulse: 1 hi & 1 low pulse terminals: 4mm bt 15 terminals each / no 1 ups 15 kva 15kva online ups, dsp controlled, igbt, with lcd display 1 phase input output each / no 1 150 kvh batteries exide make 12v 150 / 200 ah smf batteries each / no 1 computer lab wall mounted projectors 3, 000 ansi lumens, resolution 1024x768 display type 0.55 dlp x 1 video modes 720p, 1080i, 1080p / 60, 1080p / 24 lamp type 190w metal halide bulb each / no 1 staff mfb lazer printers main input tray 150 sheets of regular weight print speed 14 a4 pages per minute ( ppm ) , 15 letter size ppm print resolution 600 x 600 dpi duty cycle 8, 000 single sided pages per month ( maximum ) each / no 1 department and staff laptop computers:7thgeneration corei5 / i7, 8gb ram, 1tb hdd, 2gb graphics, 23.8 fhd windows 10 all in one desktop pc with wi fi enabled each / no 1 c programming laboratory computers ( wi fi enabled ) computers:7thgeneration corei5 / i7, 8gb ram, 1tb hdd, 2gb graphics, 23.8 fhd windows 10 all in one desktop pc with wi fi enabled each / no 1 computer network laboratory / mobile application developmen / artificial intelligence and machine learning laboratory server computer higher end specifications each / no 1 laser printers hp laser jet pro m1210 multifunction printer series each / no 1 ups and batteries 10 kva – ups each / no 1 batteries rack 25 batteries each / no 1 network printer hp jet 4240n network ready laser printer each / no 1 networking for 20 nodes cat6 utp cable ( box of 305 mtrs ) , 24 port ethernet networking switch – sr224 cisco, i / o with smb, jack panel – 24 ports cat6 patch cable ( 3 mts ) , rj 45 connectors, 1” flexible pipe per runnining mtr, 2” flexible pipe per running mts, networking rack each / no 1 air conditioners for labs centralized ac with duct system each / no 1 projectors dell 1510x each / no 1 28 department of mechanical and smart manufacturing 1.metallurgical inverted microscope • type of product co axial research metallurgical microscope vision plus • magnification 40x–1000x • illumination incident light through epi – illuminator with field aperture diaphragm and filter slots. continuously variable luminosity control through built in electronic transformer. • focusing co–axial focusing module with slides travelling on bearing guide ways. • optical tube binocular • eye pieces quadruple revolving nosepiece for quick magnification change with positive click stops for proper centering. compensating high eye point wide field eyepiece 10x. • stages large graduated mechanical stage with low drive co – axial controls for x–y movements on the ball slides. • objectives achromatic flat – field metallurgical corrected and anti mount fungus m5x, m10x, m45x, & m100x ( oil ) . • filters green & blue. • focusing: co–axial focusing module with slides each / no 1 2.fatigue test specification ft 200 max. bending moment ( kg. cm ) 200 bending moment adjustable ( kg.cm ) 25 200 ranges : 1 kg.cm ii kg.cm 25 125 125 200 gripping dia of specimen ( mm ) = 12 testing dia of specimen ( mm ) = 8 rotating speed in rpm =4200 accuracy of applied bending moment =±1% mechanical counter: no. of digits multiplying factor= 63 power required in hp 0.5 main supply 3ph 440v 50hz overall size ( mm ) 1000l x 500w x 600h weight ( kg ) 120 each / no 1 29 manufacturing process lab 1 foundry and forging laboratory iii sem 1 universal strength testing machine & attachments sand testing equipments each / no 1 2 shear strength attachments sand testing equipments each / no 1 3 tensile strength attachments sand testing equipments each / no 1 4 permeability tester sand testing equipments each / no 1 5 corehardness tester sand testing equipments each / no 1 6 mouldhardness tester sand testing equipments each / no 1 7 sieve analysis test setup sand testing equipments each / no 1 8 clay content tester sand testing equipments each / no 1 9 sanddrier sand testing equipments each / no 1 10 moisture content tester sand testing equipments each / no 1 11 clay washer along with the accessories each / no 1 12 sand rammer sand testing equipments each / no 1 13 flatteners 2 moulding tools each / no 1 14 tongs 18 moulding tools each / no 1 15 ball peen hammer tools used for foundry and forging each / no 1 16 cross peen hammer tools used for foundry and forging each / no 1 17 wooden log 18x 24 tools used for foundry and forging each / no 1 18 g i buckets 15 liters tools used for foundry and forging each / no 1 19 surface block 18x 18 tools used for foundry and forging each / no 1 20 centrifugal blower tools used for foundry and forging each / no 1 21 power hammer tools used for foundry and forging each / no 1 22 omega lpg fire hearth furnace chamber type, robust heavy duty construction, lined with high density ceramic fiber modules and blankets. gas ( png / lpg ) , automatic operation with auto ignition and flame monitoring system. sealing of the vertical lift doors and bogie through pneumatically operated soft seal clamps to ensure no ingress of cold air. thermal calibration as per api standards. each / no 1 23 coal fired smithy furnace both fire & ordinary brick size 3”x3”x5.9” gratingsfired ( two side fire each furnace ) , blower with kirloskar motor with starter ( 5hp, 2800rpm ) , interconnecting pipe reducer 3 inch pipe each / no 1 24 mini cupola 5kgs, operating temp 1500 c, 6kw, 230volt / single phase, crucible, heating element: 80 / 20 nichrome wire, insulation: by brick or ceramic fibre each / no 1 25 first aid box safety tools each / no 1 26 aluminium melting furnace capacity 5 kgs, operating temp 1200 c, rating 4.5 kw, 230 volt / single phase crucible 5 kg, chamber: high alumina content grooved brick temperature control. heating each / no 1 27 empty metallic drums forging tools each / no 1 28 swage block 50kg castiron forging tools each / no 1 29 anvil 50kg castiron forging tools each / no 1 30 anvil 100kg cast iron forging tools each / no 1 31 round tong, flat tong, square tong & bent tong forging tools each / no 1 32 swages top & bottom ¼“ms handle forging tools each / no 1 33 fuller top & bottom ¼“ ms handle forging tools each / no 1 34 hammer 2lb double headed forging tools each / no 1 35 sledge hammer 8lb wooden handle forging tools each / no 1 36 shovels moulding tools each / no 1 37 flatters forging tools each / no 1 38 set hammers ¼“ ms handle forging tools each / no 1 39 poker forging tools each / no 1 40 hot chisel ¼“ ms handle forging tools each / no 1 41 cold chisel l¼“ mshandle forging tools each / no 1 42 punches ½ round forging tools each / no 1 43 punches ½ square forging tools each / no 1 44 green sand ( bentonite & coal dust mixed ) moulding tools each / no 1 45 silica sand ( bentonite & coal dust mixed ) moulding tools each / no 1 46 bentonite powder moulding tools each / no 1 47 coal dust moulding tools each / no 1 48 tool kit gi box: ( peen & round rammer, rectangular trowel, smoother 4, leaf trowel big & small, lifter, ventwire, sprue pin, cleaner, divider 6”, drawspike, steelrule ( 300mm ) forging tools each / no 1 49 moulding boxes ( 12”x12”x4” ) cope drag ms forging tools each / no 1 50 teak wood leveller ( 18”x2”x1½” ) forging tools each / no 1 51 dumble split pattern 9”x3” ( aluminium ) forging tools each / no 1 52 single piece pattern step pulley ( aluminium ) forging tools each / no 1 53 split pattern groove pulley ( aluminium ) forging tools each / no 1 54 shovel standard size forging tools each / no 1 55 match plate pattern 9”octogonal block forging tools each / no 1 56 pelton wheel cup ( aluminium ) forging tools each / no 1 57 bellow 1’ forging tools each / no 1 58 pentagonal block self cored ( aluminium ) forging tools each / no 1 59 hexagonal block self cored ( aluminium ) forging tools each / no 1 60 core box split ( 6”x4”x4”, 40mmhole ) aluminium forging tools each / no 1 61 crucible ( graphite 20kg capacity ) forging tools each / no 1 62 abc core oil forging tools each / no 1 63 steel rule forging tools each / no 1 30.manufacturing process lab ii – iv sem 1 tool and cutter grinder with attachments tool and cutter grinder: with all necessary attachments to grind all types of metals each / no 1 2 universal milling machine with complete accessories. [ hmt ] universal milling machine: with complete accessories. ( hmt ) each / no 1 3 radial drilling machine radial drilling machine: with complete accessories ( hmt ) each / no 1 4 heavy duty drilling machine heavy duty drilling machine: with complete accessories ( hmt ) each / no 1 5 high speed lathe high speed lathe: with complete accessories ( hmt ) each / no 1 6 surface grinding machine surface grinding machine with complete accessories each / no 1 7 power saw power saw : ( rolex 10 cap hilton ) each / no 1 8 rack driven planning machine rack driven planning machine: with complete accessories each / no 1 9 shaping machine shaping machine : with complete accessories ( 24” / 18” stroke ) each / no 1 10 belt driven slotting machine belt driven slotting machine: with complete accessories each / no 1 31.elements of mechanical engineering 1 sectional working model of 2 stroke petrol engine each / no 1 2 sectional working model of 4 stroke petrol engine each / no 1 3 francis turbine model each / no 1 4 pelton wheel turbine model each / no 1 5 kaplan turbine model each / no 1 6 centrifugal pump actual cut section each / no 1 7 vapor compression refrigeration system demo model each / no 1 8 vapor absorption refrigeration system demo model each / no 1 9 gear box demonstration model each / no 1 10 demo model of open and cross belt drives each / no 1 11 robot joints and links ( demo purpose ) each / no 1 12 air conditioning system ( demo model ) each / no 1 32.data structures lab equipments 1 desktop computer inspiron 24 5000 all in one desktop: 11th generation intel® core™ i3 1115g4 processor ( 6mb cache, up to 4.1 ghz ) , windows 10 home, english, intel® uhd graphics with shared graphics memory, 8gb, 8gbx1, ddr4, 2666mhz, 1tb 7200 rpm 2.5 sata hard drive, monitor 23.8 inch fhd ( 1920 x 1080 ) anti glare narrow border infinity non touch display, a frame stand, km636 wireless keyboard & mouse white, white fhd ir camera, intel® wi fi 6 2x2 ( gig+ ) and bluetooth 5.1, 90 watt ac adapter, power cord ( india ) each / no 1 2 operating system windows 7, 8, 8.1, 10, 11 pro each / no 1 3 software 1. eclipse: eclipse ide for c / c++ 2. turbo c: turbo c++ or c for windows 7, 8, 8.1 and 10 32 / 64 bit full screen 3. dev: dev c++ 4. codeblocks each / no 1 4 projectors: multimedia projectors hitachi multimedia projector with storage media port integrated in projector, resolution: 1024 x 768 xga, ansi, lumen:4000. each / no 1 5 antivirus software: mcfee software epo ( 40 user ) each / no 1 6 projector screens good quality each / no 1 7 laser printers hp laser jet pro m1210 multifunction printer series each / no 1 8 ups and batteries 10 kva – ups each / no 1 9 batteries rack capacity of 20 to 25 batteries each / no 1 10 laptop computer : 7th genration core i5 / i7, 8 gb ram, itb hod, 2gb graphics, 23.8 fhd windows 10 all in one desktop pc with wifi enabled each / no 1 33.computer aided machine drawing lab equipments 1 desktop computer inspiron 24 5000 all in one desktop: 11th generation intel® core™ i3 1115g4 processor ( 6mb cache, up to 4.1 ghz ) , windows 10 home, english, intel® uhd graphics with shared graphics memory, 8gb, 8gbx1, ddr4, 2666mhz, 1tb 7200 rpm 2.5 sata hard drive, monitor 23.8 inch fhd ( 1920 x 1080 ) anti glare narrow border infinity non touch display, a frame stand, km636 wireless keyboard & mouse white, white fhd ir camera, intel® wi fi 6 2x2 ( gig+ ) and bluetooth 5.1, 90 watt ac adapter, power cord ( india ) each / no 1 2 operating system windows 7, 8, 8.1, 10, 11 pro each / no 1 3 software solid edge software latest version ( 60 user license ) each / no 1 4 projectors: multimedia projectors hitachi multimedia projector with storage media port integrated in projector, resolution: 1024 x 768 xga, ansi, lumen:4000. each / no 1 5 antivirus software: mcfee software epo ( 40 user ) each / no 1 6 projector screens good quality each / no 1 7 laser printers laser jet pro m1210 multifunction printer series each / no 1 8 ups and batteries 10 kva – ups each / no 1 9 batteries rack capaeis of 20 to 25 batteries each / no 1 10 laptop computer : 7th genration core i5 / i7, 8 gb ram, itb hod, 2gb graphics, 23.8 fhd windows 10 all in one desktop pc with wifi enabled each / no 1...

Department Of Commerce And Industry - Karnataka

30754134 supply of tools kits for artisans 1 d4 stone cutter tool kit ( rate for supply of each toolkit ( including cost of all taxes, transportation, etc. ) steel forged sledge hammer 10 lbs steel forged sledge hammer 6 lbs steel forged sledge hammer 4 lbs steel forged sledge hammer 2 lbs stone cutting chisels 6 measuring 5 x 4 tape 2 mtrs try square 10 gauge 1 ft x 2 ft m.s.ring 2 mtrs. mumty with handle iron pan ( baandli ) std size g.i. box 18 crobar 5ft hand blower 6inches 2 1 1. carpentry craft tool kit rate for supply of each toolkit ( including cost of all taxes transportation etc. ) iron jack plane 9 with blade ) `t` bar camp 6ft x 2 drop forged 18 hand saw with p v c handle ( ) firmer chisels ( 1 / 2 1 1 â½ 2 ) ( set ) electrical power drilling machine 10 mm capacity claw hammer drop forged ( 1 lbs ) ball pane hammer ( 1 lbs ) steel forged pincer 8 carpentry try square 6 steel measuring tape 2 mtr buffing and polishing machine screw driver with plastic handle 8 & 10 g.i. tool box 24x7x7 cutting plair 8 screw auger ( 1 / 2 inch â¾ inches ) 3 e5 craft :black smithy kit ( rate for supply of each toolkit ( including cost of all taxes transportation etc. ) sledge hammer 2 lb sledge hammer 8 lb sledge hammer 16 lb iron pan 18 made out of 22 gauge cr sheet cross pane hammer 1 lb tongs with all all shapes 20 long cold chisel flat 1 try square 12 x 24 hacksaw 12 blade with frame steel foot rule 1 feet steel measuring tape 2m hand blower 12 / no.12 anvil ( std. ) 200 mm dia x 100mm ht 4 f6 craft: masonary tool kit ( rate for supply of each toolkit ( including cost of all taxes transportation etc. ) karane big size steel with pvc / wooden handle karane medium size steel with pvc / wooden handle karane small size steel with pvc / wooden handle edge & corner finishing set level bar ( alluminium ) 4 lengh masonary measuring tape 7.5 mtrs iron pan standard size munty with handle 5 ft crow bar masonary try square 1 x 2 cold chisels â¾ dhammus 4kgs pick axe with handle steel forged sledge hammer 2 lbs thread standard measuring tube 20 ft steel gurmal g.i. box 24 x 7 x 7 5 c3 craft: barber ( rate for supply of each toolkit ( including cost of all taxes transportation etc. ) hair dressing machine size of 6 length x2 width with adjustable screw type hair brush size of 7 length x2.2 width. with wooden frame with nylon smooth razor. shaving brush size of 4.2 length of wooden handle with fine nylon brush. water spray 300ml capacity with spraying unit of plastic handle teeth scissor size of 6 length made out of high carbon steel brush scissor size of 6 made out of high carbon steel size. brush scissor size of 7 made out of high carbon steel size. barber combs nylon size of 8 length x 40 mm width out of nylon razor set razor using blade steel chair with variable height, variable head rest, hand rest, leg rest. mirror 3 feet x 2 feet tool kit box ( gi ) size of 12 width 7 width x8 height 6 d2 dhobi craft tool kit ( rate for supply of each toolkit ( including cost of all taxes transportation etc. ) brass iron box 6 kgs including wooden handle g.i. bucket 20 litres capacity cotton jamkhana ( 5 x 3 ) sholapur type thick bedsheets plastic mug sponge m.s. ring ( 6 dia 1 height ) ...

Indian Army - Karnataka

30468919 bids are invited for inspection lamp led type with wire inspection lamp led type with wire , combination piller combination piller , pneumatic impact wrench pneumatic impact wrench , bench drill machine 1/2 with motor bench drill machine 1/2 with motor , web sling 5 ton web sling 5 ton , distilled water plant distilled water plant , crocodile clip crocodile clip , recoiled hose with fitting length 10 mtr recoiled hose with fitting length 10 mtr , arbor press arbor press , gas welding accessories gas welding accessories , wheel bearing puller 250 mm wheel bearing puller 250 mm , sliding hammer sliding hammer , f.r.l f.r.l , high pressure vehicle washer high pressure vehicle washer , battery jumber cable battery jumber cable , oil filter clamp patti type oil filter clamp patti type , electirc drill machine reversible electirc drill machine reversible , hydraulic trolley jack cap 10 hydraulic trolley jack cap 10 , hss drill bit set hss drill bit set , baby / special socket set baby / special socket set , oil filter spanner belt type oil filter spanner belt type , tool trolley with technician tools tool trolley with technician tools , inspection trolley inspection trolley , screw driver set screw driver set , bench vice 125 mm bench vice 125 mm , anvil 25 kgs anvil 25 kgs total quantity : 1...

Indian Army - Karnataka

30360318 bids are invited for pneumatic impact wrench pneumatic impact wrench , recoiled hose with fitting length 10 mtr recoiled hose with fitting length 10 mtr , f.r.l f.r.l , hydraulic trolley jack cap 10 ton hydraulic trolley jack cap 10 ton , inspection trolley inspection trolley , inspection lamp led type with wire inspection lamp led type with wire , distilled water plant distilled water plant , wheel bearing puller 250 mm wheel bearing puller 250 mm , oil filter clamp patti type oil filter clamp patti type , oil filter spanner belt type oil filter spanner belt type , bench vice 5 no bench vice 5 no , bench drill machine ½” with motor bench drill machine ½” with motor , arbor press arbor press , high pressure vehicle washer high pressure vehicle washer , hss drill bit set hss drill bit set , screw driver set screw driver set , combination plier combination plier , crocodile clip crocodile clip , sliding hammer sliding hammer , electric drill machine reversible electric drill machine reversible , tool trolley with technician tools tool trolley with technician tools , anvil 25 kgs anvil 25 kgs , web sling 5 ton web sling 5 ton , gas welding accessories gas welding accessories , battery jumper cable battery jumper cable , baby / special socket set baby / special socket set total quantity : 1...

Indian Army - Karnataka

30330991 bids are invited for pneumatic air gun machine withaccessories pneumatic air gun machine withaccessories , vechile washing machine vechile washing machine , heavy drill machine with stand heavy drill machine with stand , technical tool trolly technical tool trolly , 10 ton jack heavy duty 10 ton jack heavy duty , harbour pressure harbour pressure , gas welding pipe gauge & accessories gas welding pipe gauge & accessories , technical task board technical task board , inspection trolley inspection trolley , distil water plant distil water plant , vice bench no. 05 vice bench no. 05 , wheel bearing puller wheel bearing puller , drill bit drill bit , anvil anvil , filter clamp filter clamp , web sling 5 ton 8 mtr web sling 5 ton 8 mtr , inspection lamp inspection lamp total quantity : 1...

South Western Railway - Karnataka

30058843 supply of set of items suitable to 1 3/8set of items suitable to 1 3/8,set of items suitable to 1 3/8 installation tool of lock bolting equipment, make should be huck orfully equivalent. 1) 1 3/8 installation tool anvil part no 112719 g (400015052) 1no. 2)1 3/8 installation toolseal kit suitable to machine 1set. note: firm to submit performance details/ successful supplier certificate ofsame or equivalent work, else offer is likely to be passed over...

Department Of Defence Research And Development - Karnataka

30009238 linear measurement instruments linear measurement instruments , digital outside micrometer ( 0 25mm ) , digital outside micrometer ( 25 50 mm ) , digital outside micrometer ( 50 75 mm ) , digital outside micrometer with spherical anvil ( 0 25 mm ) , digital outside micrometer with pointed anvil ( 0 25 mm ) , digital vernier caliper ( 0 150 mm ) , digital vernier caliper ( 0 300 mm ) , digital height gauge 0 300 mm...

Department Of Commerce And Industry - Karnataka

29856557 supply of toolkits to ddkvi gadag electrical jack plain jack plain jack plain hand drill m / c. mortise chisels firmer chisels claw hammer cutting plier screw drivers smooth file t – bar clamp augur set hand saw nose plier tool box electrical drill woodcutting machine angers set scrubbing stone hair dressing machine shaving brush teeth scissor barber scissor razor set belgium glass mirror barber chair ( stainless steel ) fitted with arms & foot rest massager hair brush white scarping stone soap with cup water spray plastic mug barber combs tool kit box sitting bench steel electrical shaving machine heavy duty iron box ( big ) steel bodyiron box electrical steel table sponge table clothe g. i. bucket steel stool plastic mug iron box ring g.i.steel rack table cloth steel slotted angle rack hand blower anvil hammer hammer tong m.s. tong m.s. chisel ( chana ) chisel ( chana ) hack saw centre punch tin cutter measuring steel tape try square flat file rough flat file smooth tool kit box electrical drill...

Department Of Commerce And Industry - Karnataka

29710692 supply of improved toolkits 1. karani steel big 2. karani steel medium 3. karani steel small 4. karani steel for design finishing 5 aluminum level bar 6 aluminum level bar 7 gara chakka 8 measuring tape, fibre 9 measuring tape, steel 10 iron pan / fiber pan 11 spade ( mumty ) 12 spirit level 13 plumb bob big 14 cold chisel 15 sledge hammer 16 crow bar 17 measuring try square 18 dhummous 19 plastic / fiber baskets with handle unbreakable 20 hand hacksaw with blade 21 gurmal 22 plastic pipe 23 pick axe 24 tool kit box 25 4’’ cutting machine, iso certified , with blade 1. brass iron box 2 plastic bucket 3 m.s.ring 4 iron / fiber pan 5 plastic mug 6 sponze 7 steel table 1. hair dressing machine [ hair clipper ] 2. hair brush 3. shaving brush 4. water spray 5. teeth scissor 6. barber scissor 7 barber combs 8 razor set 9 tool kit box / bag 10 electrical clipper 11 hair drier 12 charging hair trimmer 12 apron 14 mirror 15 hair cutting chair 1. spring divider 2. sledge hammer 3. sledge hammer 4. sledge hammer 5. iron pan / fiber pan 6. cross pane hammer 7. tongs flat 8 cold chisel flat 9 flat file 10 try square 11 hacksaw 12 steel foot rule 13 steel tape 14 centre puch 15 tin cutter 16 anvil 17 cutting player 18 gi / plastic bucket 19 power operated blower iso 20 tong , round 1 4’’ cutting machine, iso certified , with blade 2 iron jack plane iso certified 3 hand saw 4 power drilling machine 5 firmer chisel 6 flat chisel 7 mortise chisel 8 flat chisel 9 ball pean hammer 10 claw hammer 11 try square 12 steel tape 13 screw driver 14 triangular file 15 t bar clamp 16 tool kit box 1 tailoring machine, i.s.i & iso 2 power motor...

South Western Railway - Karnataka

29656848 supply of set of items suitable to 1 3/8set of items suitable to 1 3/8,set of items suitable to 1 3/8 installation tool of lock bolting equipment, make should be huck orfully equivalent. 1) 1 3/8 installation tool anvil part no 112719 g (400015052) 1no. 2)1 3/8 installation toolseal kit suitable to machine 1set. note: firm to submit performance details/ successful supplier certificate ofsame or equivalent work, else offer is likely to be passed over...

Department of Defence Production - Karnataka

29606574 bids are invited for hydropenumatic installation tool, stroke 0.437 , min pulling force 9.34kn, cycle time 1 sec, weight , pulling head straight with removable anvil insert, nose length 1.6 1.9 , replacable jaws, thrteaded , hand riveter length 9 9.5 , nose height 1.8 2 , side to center 0.5 to install cherrymax reivets cr 3 ,pnumetic riveter with feed through system, stroke0.75 max, pulling force 550 pounds (2.45 kn) , cy ,pulling head straight with removable anvil insert,nose length 1.5 3.2 , replacable jaws, thrteaded total quantity : 200...

Department Of Commerce And Industry - Karnataka

29437741 supply of tool kit to ddkvi ( dic ) tumakuru 1 spring divider 2 sledge hammer 3 iron pan/ fiber pan 4 sledge hammer 5 anvil 6 centre puch 7 steel tape 8 cold chisel flat 9 steel foot rule 10 sledge hammer 11 tong, round 12 tongs flat 13 try square 14 hacksaw 15 tin cutter 16 power operated blower iso 17 flat file 18 gi/plastic bucket 19 cross pane hammer , 1 sledge hammer 2 cross pane hammer 3 centre puch 4 cold chisel flat 5 power operated blower iso 6 gi/plastic bucket 7 tongs flat 8 spring divider 9 sledge hammer 10 flat file 11 try square 12 sledge hammer 13 steel tape 14 iron pan/ fiber pan 15 steel foot rule 16 hacksaw 17 tong, round 18 tin cutter 1 sponj 2 m.s.ring 3 plastic mug 4 brass iron box 5 steel table 1 steel tape 2 ball pean hammer 3 4 cutting machine iso certified, with blade 4 flat chisel 5 hand saw 6 power drilling machine iso certified 7 try square 1 plastic/fiber baskets with handle unbreakable 2 iron pan/fiber pan 3 cutting machine iso certified with blade 4 spirit level 5 plumb bob big 6 hand hack saw with blade ‘12’ 7 karani steel big 8 karani steel small 9 cold chisel 10 aluminum level bar 11 measuring tape 12 tool kit box 13 gurmal 14 spade (mumty) 15 plastic axe 16 crow bar 17 measuring tape, steel 18 plastic pipe 19 karani steel medium 20 measuring try square 21 karani steel for design finishing 22 gara chakka 1 plastic/fiber baskets with handle unbreakable 2 iron pan/fiber pan 3 cutting machine iso certified with blade 4 spirit level 5 plumb bob big 6 hand hack saw with blade ‘12’ 7 karani steel big 8 karani steel small 9 cold chisel 10 aluminum level bar 11 measuring tape 12 tool kit box 13 gurmal 14 spade (mumty) 15 plastic axe 16 crow bar 17 measuring tape, steel 18 plastic pipe 19 karani steel medium 20 measuring try square 21 karani steel for design finishing 22 gara chakka 1 mirror size “2x1.5” ft with plastic molded frame 2 barber combs 3 razor set 4 water spray 5 charging hair trimmer 6 electrical clipper 7 teeth scissor 8 hair brush 9 tool kit box/bag 10 hair cutting chair 11 hair drier 12 brush scissor 13 shaving brush ...

South Western Railway - Karnataka

29369352 supply of set of items suitable to 1 3/8set of items suitable to 1 3/8,set of items suitable to 1 3/8 installation tool of lock bolting equipment, make should be huck orfully equivalent. 1) 1 3/8 installation tool anvil part no 112719 g (400015052) 1no. 2)1 3/8 installation toolseal kit suitable to machine 1set....

Visvesvaraya Technological University - Karnataka

29334967 tenders for supply and installation of tools supporting machines and measuring instruments for cnc machine, dept of mechanical engineering at vtu p.g.center, belagavi t 1 round file bastard cut 2 square file second cut 3 round file coarse cut 4 square file coarse cut 5 square file bastard cut 6 vernier depth gauge, caliper type 7 outside micrometer 8 2 point inside bore gauge 9 ratchet thimble micrometer 10 radius gauge 1~7mm 11 try square 8 inch length 12 lever type dial, with magnetic stand 13 round file smooth cut 14 thread gauge 15 radius gauge 7.5~15.5 16 vernier caliper 0.150mm, graduation 0.02mm 17 round file second cut 18 vernier caliper 0 200mm, graduation 0.02mm 19 outside micrometer 0.25mm, accuracy, + / 0.002mm 20 vernier height gauge 21 square file smooth cut 22 magnetic stand with dial indicator 23 degree bevel protractor 24 cast iron anvil 25 letter punch 26 2 point inside bore gauge 27 number punch set 28 plunger type dial 1 end mill 16mm 2 face milling cutter 80 mm dia 3 fixture bt40 machine tool offset fixture 4 face mill holder for dia 80 cutter bt4000fmc2760 5 tool trolley bt40 6 machine tap for m12 7 end mill holder for dia 16mm bt40sldb1663 8 end mill 12 mm 9 end mill 10 mm 10 machine tap for m10 11 tap collets m12 12 tap collets m8 13 bt30 tool clamping fixture bt40tcf 14 tap collets m10 15 insert for cutter 50 mm dia 16 collect chuck bt40 ad er32 70 17 collect chuck bt40 ad er 32150 18 er32 spanner 36spe32 19 drill 6.8mm 20 face milling cutter 50mm dia 21 drill 10.2mm 22 machine tap for m8 23 collect set er32 collest 24 face mill holder for dia 50 cutter bt4000fmc2245 25 drill 8.5 mm 26 insert for cutter 80 mm dia 1 surface table 2 drill 8.5mm 3 tap collets m10 4 tool trolley bt30 5 machine tap for m8 6 tool grinder 7 tool clamping fixture bt30tcf bt30 8 v block 4 clamping range 5 mm 85mm 9 drill 10.2mm 10 end mill holder for dia 16 mm bt30sldb1660 11 machine tool offset fixture bt30 12 semi automatic hacksaw machine 13 collet chuck bt30ader3260 14 er32 spanner 36spe32 15 insert for cutter 50 mm dia 16 tap collets m12 17 end mill 12mm 18 end mill 16mm 19 end mill 10mm 20 collet chuck bt30ader32100 21 face mill holder for dia 80 cutter bt30fmc2760 22 collet set er 32 collets 23 face milling cutter 50mm dia 24 machine tap for m10 25 face mill holder for dia 50 cutter bt30fmc2245 26 machine tap for m12 27 drill 6.8mm 28 tap collets m8...

Department Of Commerce And Industry - Karnataka

29260533 supply of tools to deputy director kvi, mangaluru. 1 air blower ( power operated ) 2 aluminum level bar 3 auto jack 1no 4 carpentry chisel 0.5 5 carpentry chisel 1.25 6 carpentry chisel 3.0 7 chisel 8 cold chisel 9 cut type spanner 1set 10 cutting plier 11 cutting plier 1no 12 drill bit set 13 fiber pane 2 nos 14 g i bucket 15 karani big 16 karani medium 17 karani small 18 karni designing / finishing 19 measuring tape 20 measuring tape ( fm 3 meter 16 ) 21 multipurpose screw driver set 22 mumty spade 23 pickaxe with handle 2.7 kg 24 plumb bog 25 power operated angle grinder machine 26 power operated angle grinder machine 1no 27 power operated impact drilling machine 28 power operated cutting machine 29 power operated cutting machine 30 power operated cutting machine 31 power operated impact drilling machine 32 rinch spanner 10 33 ring spanner 1 set 34 screw driver with tester 35 sewing machine ( foot machine ) 36 sledge hammer 37 sledge hammer 38 sledge hammer 39 sledge hammer 40 sludge hammer 1.5 lb wooden handle 41 spirit level 42 tongs 43 try square 44 water level tube 45 wax bag 46 anvil 20 kg...

South Western Railway - Karnataka

28935620 supply of set of items suitable to 1 3 / 8set of items suitable to 1 3 / 8, set of items suitable to 1 3 / 8 installation tool of lock bolting equipment, make should be huck or fully equivalent. 1 ) 1 3 / 8 installation tool anvil part no 112719 g ( 400015052 ) 1no. 2 ) 1 3 / 8 installation tool seal kit suitable to machine 1set. note: warranty supplied for spares should be minimum 6 months or more...

South Western Railway - Karnataka

28819526 supply of set of items suitable to 1 3 / 8set of items suitable to 1 3 / 8, set of items suitable to 1 3 / 8 installation tool of lock bolting equipment, make should be huck or fully equivalent. 1 ) 1 3 / 8 installation tool anvil part no 112719 g ( 400015052 ) 1no. 2 ) 1 3 / 8 installation tool seal kit suitable to machine 1set. note: warranty supplied for spares should be minimum 6 months or more...

South Western Railway - Karnataka

28742604 supply of xt3 holematic internal micrometerxt3 holematic internal micrometer,xt3 holematic internal micrometer(xth) with l.c 0.001mm, pistol grip handle with an advancedtrigger action two point measuring head ensures constant measuring pressure and fast and accuratemeasurement. tungsten carbide measuring faces on all 3 point heads from 12.5mm, blind bore measurementabove 12.5mm, having the features like ip67 electronics, metric inch conversation, 4 preset memories, rs 232output, bluetooth data transmission, simple 2 button operation, along with calibration certificatewith standardsetting rings. with operational range 175 200mm (xth175m bt), includes anvil head of range 175 200mm withxtpg04 bt pistol grip holder and dia175mm master setting ring (or) the similar item of baker model.dealership certificate is to be submitted at the time of tender as well supply.make:bowers/baker/mitutoyo...

South Western Railway - Karnataka

28742341 supply of xt holematic internal mocrometersxt holematic internal mocrometers, xt holematic internal mocrometers of range 225 250mm make baker or bower / mitutoyo , xt3 holematic internal micrometer ( xth ) with l.c 0.001mm, pistol grip handle with an advanced trigger action two point measuring head ensures constant measuring pressure and fast and accurate measurement. tungsten carbide measuring faces on all 3 point heads from 12.5mm, blind bore measurement above 12.5mm, having the features like ip67 electronics, metric inch conversation, 4 preset memories, rs 232 output, bluetooth data transmission, simple 2 button operation, along with calibration certificatewith standard setting rings. with operational range 175 200mm ( xth175m bt ) , includes anvil head of range 175 200mm with xtpg04 bt pistol grip holder and dia175mm master setting ring ( or ) the similar item of baker model. dealership certificate is to be submitted at the time of tender as well supply. make:bowers / baker / mitutoyo...

South Western Railway - Karnataka

28190119 supply of digimatic ( digital ) outsidedigimatic ( digital ) outside,digimatic ( digital ) outside micrometer with interchangeable anvils resolution 0.001mm range 150 300 mm. make : mitutoyo / tesa / forbes / insize / brown & sharp. calibration certificate fromnabl accredited lab, traceable to national standard, warranty certificate not less than 6 months should besubmitted at the time of supply....

South Western Railway - Karnataka

27068555 supply of , digimatic ( digital ) outside micrometer with interchangeable anvils resolution 0.001mm range 150 300 mm. make : mitutoyo / tesa / forbes / insize / brown & sharp. calibration certificate from nabl accredited lab, traceable to national standard, warranty certificate not less than 6 months should be submitted at the time of supply....

South Western Railway - Karnataka

26892934 supply of , 18 volt high torque impact wrench with 2 x 5.0 ah li ion battery, 3 speed torque 135/400/950 nm max bolt dia m 22 anvil size 1/2 (12.7mm), make dewalt dcf899p2, bosch and hitachi...