Directorate Of Municipal Administration - Karnataka

40975100 construction of cement concrete road and cd fom barikara ramappa house to gundinakeri krishnappa house at 8th ward and from yallajji hanumanthappa house to thoppannanavara jayappa house and muddera hanumanthappa house to basappa house at 26th ward valmiki nagara and shilarageri haanappa masidi premises at 10th ward and formation of cement concrete flooring surrounding to kallubavi at 20th ward in tmc harapanahalli limits...

Indian Army - Karnataka

40890924 bids are invited for guest room construction of gate pillar 02 ft x 02 ft x 08 ft , supply and laying of black granite tiles 02 ft x 01 ft on gate pillars and existing side wall , gate board made out of acp sheet with both side printed inyle fixing size 20 ft x 2 ft , 2 inch ss pipe frame for gate board size 23 ft x 14 ft , spot light with wiring , replacement of old gi sheet 8 ft long including labour charges , granite slab at window 18 inch x 08 inch with supporting wall , granite top for sink counter 02 ft x 8.5 ft with supporting wall , ss fly proof mesh 11.5 ft x 2.25 sqft qty 02 and 3.75 ft x 3.75 ft qty 01 , nova pan and aluminum fabrication 11.5 ft x 2.25 qty 02 , pcc concrete flooring with smooth plaster finish , arrow shaped board made of 2 inch dia and 1.5 inch dia ss pipe frame with both side vinyle print on acp sheet , flex printed menu board with stand one side size 4 ft x 2ft , replacement of bed sheets with pillow covers , mattress , single seaters sofa , peg table , centre table , beds , almirahs , garden chair for 4 seater making and maint of fabrication work at aashiyana total quantity : 560...

Central Reserve Police Force - Karnataka

40429805 tender for repairing and maintenance of bathing ghat at crpf banglore ; 1 earth work in excavation by mechanical means ( hydraulic excavator ) / manual means in foundation trenches or drains ( not exceeding 1.5 m in width or 10 sqm on plan ) , including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.2.8.1 all kinds of soil. 2 providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centring, shuttering, finishing and reinforcement all work up to plinth level :5.1.2 1:1.5:3 ( 1 cement : 1.5 coarse sand ( zone iii ) derived from natural sources : 3 graded stone aggregate 20 mm nominal size de rived from natural sources ) 3 structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. 4 providing and fixing pre coated galvanised iron profile sheets ( size, shape and pitch of corrugation as approved by engineer in charge ) 0.50 mm ( + 0.05 % ) total coated thickness with zinc coating 120 grams per sqm as per is: 277, in 240 mpa steel grade, 5 7 microns epoxy primer on both side of the sheet and polyester top coat 15 18 microns. sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by engineering charge. the sheet shall be fixed using self drilling / self tapping screws of size ( 5.5x 55 mm ) with epdm seal, complete upto any pitch in horizontal / vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 5 providing and fixing pre coated galvanised steel sheet roofing accessories 0.50 mm ( +0.05 % ) total coated thickness, zinc coating 120 grams per sqm as per is: 277, in 240 mpa steel grade, 5 7 microns epoxy primer on both side of the sheet and polyester top coat 15 18 microns using self drilling / self tapping screws complete : 12.51.1 ridges plain ( 500 600mm ) 6 brick work with common burnt clay f.p.s. ( non modular ) bricks of class designation 7.5 in superstructure above plinth level up to floor v level in all shapes and sizes in :6.4.2 cement mortar 1:6 ( 1 cement : 6 coarse sand ) 7 15 mm cement plaster on the rough side of single or half brick wall of mix :13.2.2 1:6 ( 1 cement: 6 fine sand ) 8 cement concrete flooring 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate ) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 11.3.1 40 mm thick with 20 mm nominal size stone aggregate 9 providing and fixing ist. quality ceramic glazed wall tiles conforming to is: 15622 ( thickness to be specified by the manufacturer ) , of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by engineer in charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand ) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 10 providing and fixing chlorinated polyvinyl chloride ( cpvc ) pipes, having thermal stability for hot & cold water supply, including all cpvc plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step cpvc solvent cement and testing of joints complete as per direction of engineer in charge.18.7.2 20 mm nominal dia pipes. 11 providing and fixing wash basin with c.i. brackets, 15 mm c.p. brass pillar taps, 32 mm c.p. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:17.7.2 white vitreous china wash basin size 630x450 mmwith a single 15 mm c.p. brass pillar tap 12 providing and fixing mirror of superior glass ( of approved quality ) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :17.32.2 rectangular shape 453x357 mm 13 providing and fixing rectangular high density polyethylene water storage loft tank with cover, conforming to isi : 12701, colour of opaque white or as approved by engineer in charge. the rate includes making necessary holes for inlet, outlet & over flow pipes. the base support i / c fittings & fixtures for tank shall be paid separately....

All India Institute Of Speech And Hearing - Karnataka

40194174 tender for repair works in ladies hostel at aiish main campus; 1 civil items 2 dismantling plastering and removing the debris with a lead upto 200m. including cost of materials, labour, hom complete as per specifications 3 dismantling cement concrete flooring or plain cement concrete work including removing and conveying the debris to distance upto 200m ( within average thickness of 15 cms ) . including cost of materials, labour, hom complete as per specifications 4 dismantling burnt brick masonry in clay mortar / lime mortar / cement mortar and stacking the bricks within a radius of 50m and removing the debris to a distance upto 200m. including cost of materials, labour, hom complete as per specifications 5 providing and fixing to wall, ceiling and floor un plasticised 90mm pvc pipes 10kg / sqcm working pressure chemp plast / waving or equivalent make with pipe fittings, wall clips, making good the wall, ceiling and floor including cost of materials, labour charges, hom of equipments and testing complete as per specifications 6 providing and fixing to wall, ceiling and floor un plasticised 110mm pvc pipes 10kg / sqcm working pressure chemp plast / waving or equivalent make with pipe fittings, wall clips, makinggood the wall, ceiling and floor including cost of materials, labour charges, hom ofequipments and testing complete as per specifications 7 providing and fixing 25mm chlorinated poly venyl chloride ( cpvc ) pipes conforming to is 15778 having thermal stability for hot and cold water supply including all cpvc plain and brass threaded fittings, this includes jointing of pipes and fittings with one step cpvc solvent cement, trenching, refilling & testing of joints complete ( external work ) 8 providing and fixing polished granite sink of size 60cms x 75cms of 23cm thick, the sink portion shall be 15cm in depth of shapes oval / round / square over brick masonry in cement mortar 1:6 including cost and conveyance of all materials, labour for all items of work, hom of equipment with all lead and lift, loading and unloading, transportation charges and all other incidental charges etc., complete as per specification and directions of the engineer in charge of the work 9 providing and laying heavy duty cobble stones 75mm thick interlock pavers, using cement and course sand for manufacture of blocks of approved size, shape and colour with a minimum compressive strength of 281 kg per sqm over 50mm thick sand bed ( average thickness ) and compacting with plate vibrator having 3 tons compaction force thereby forcing part of sand underneath to come up in between joints, final compaction of paver surface joints into its final level, including cost of materials, labour and hom of machineries complete as per specifications 10 providing and laying in position plain cement concrete of mix 1:2.:4 with cement @ 240kg with 20mm and down size: graded granite metal coarse aggregate @0.69cum and fine aggregates @ 0.459 cum, machine mixed, concrete laid in layers not exceeding 15cms thick, well compacted, in foundation plinth & cills, including cost of all materials, labour, hom of machinery, curing complete as per specifications 11 providing and removing centering, shuttering, strutting, propping etc., and removal of form work for vertical surface such as walls at any thickness, including attached pilasters, buttresses, plinth and string courses cost of all materials, labour complete as per specifications 12 providing and laying 100mm thick pre cast cover slabs over drains of width not exceeding 800 mm using m20 concrete reinforced with steel @ 6.00 kg / sqm, slabs jointed in cm 1:3 proportion and nicely finished including providing holes in the cover slabs wherever necessary for easy drainage of surface water including of labour, materials, hom, curing, lead and lift charges etc, complete as per morth specifications 13 providing two legged scaffolding for painting / concreting work using 10 15 cms. dia best quality casurina poles of 4m overall length ( 3m + 0.5m projection + 0.5m in to the ground ) the distance between two rows being 1.25m and spacing to post being 2m in both rows with 2 horizontal posts with 0.5 mm overlap on either side and braces at 2 m c to c including longitudinal and transverse middle braces to step up and providing platform with casurina poles, forms tied up using coir rope complete as per specification. for non moduar brick work 14 providing rough cement plastering 15mm thick in single coat with 1:4 cement mortar to brick masonry for base of dadooing works with sand of approved quality, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications 15 providing and fixing colour glazedtiles of size 300x450mm for walls with borders of size 300x100mm, set in cement mortar 1:3pointing with white cement mixed with matching colour pigment, including curing , cleaning etc., complete. the work includes cost of all materials, labour charges for all items of work, hire charges for equipment, etc., complete as per specification 16 providing and fixing ceramic / vitrified tiles of size 400 x 400 mm for flooring, treads & landing, laid on a bed of 20mm thick cement mortar 1:3 mix and spacer jointing filled with epoxy of matching colour pigment, including curing, cleaning etc., complete. the work includes cost of all materials, labour, curingcomplete as per specification 17 providing granite slabs of selected quality roughly dressed and fixed in cement mortar ( 1:6 ) including fixing curing etc., complete. 10 cms thick 18 providing and fixing on wall surface 4.0 kg / sq.cm h.d.p.e. rain down water pipes 110 mm outer dia. approved make and brand with necessary specials like shoes, bends and offsets fixed with iron clamps, wall plugs, screws, including cost of materials, labour, complete as per specifications 19 providing and fixing 12.5mm to 25 mm expanded metal work of 14 gauge with mathi or nandi wood patties of 50 mm x 12 mm size or 40 x 40 6mm ms angle, including two coats approved paint etc., complete. ( including cost of screws ) . including cost of materials, labour, hom complete as per specifications 20 providing and fixing ci nahani trap 10cms x 7.5cms of approved make conforming to isi specifications and construction of cistern in m 15 as per directions ( rate is inclusive of cost of materials and fixtures and conveyance of materials to work spot ) 21 providing and fixing 7.5 cms to 15.00 cms dia np grating 100 mm dia 22 wall bores in brick masonry upto 45 cm thick. including cost of materials, labour, hom complete as per specifications 23 providing and constructing burnt brick masonry with approved quality of modular bricks of standard size of class designation 5.0newton per sqmm ( table moulded ) with cement mortar 1:6 for basement and superstructure including cost of materials, labour charges, scaffolding, curing complete as per specifications 24 providing 15mm thick cement plaster in single coat with cement mortar 1:4 to brick masonry including rounding off corners wherever required smooth rendering, : providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications 25 constructing brick masonry inspection chamber 450mmx450mm and 450mm depth ( clear inside dimension ) for single pipe line using table moulded non modular bricks of class designation 50m in cement mortar 1:5, c.i.cover with frame ( light duty ) 450x450mm internal dimensions, total weight of cover with frame to be not less than 38kg ( weight of cover 23kgand frame 15kg ) rcc top slab with cement concrete1:2:4, foundation concrete 1:5:10, with 40mm downsize metal, inside plastering 12mm thick in cm 1:3, finish smooth with a floating coat of cement on walls and bed concrete complete as per standard design including cost of materials, labour charges, curing complete as per specification 26 constructing brick masonry inspection chamber 600x600mm, and 450mm depth, ( clear inside dimension ) for single pipeline, using table moulded non modular bricks of class designation 50 in cement mortar 1:5, c.i cover withframe ( light duty ) 600x600mm internal dimensions, total weight of cover with frame to be not less than 38 kg ( weight of cover 23kg and weight of frame 15 kg ) r.c.c. top slab with cement concrete m 15 with 20mm and downsize granite metal, foundation concrete m 5 with 40mm and downsize granite metal inside plastering 12mm thick with cement mortar 1:3, finish smooth with a floating coat of cement on walls and bed concrete complete as per standard design including cost of materials, labour charges, curing complete as per specifications. specification no. kbs 600x600mm and 450mm depth ( clear inside dimension ) for single pipeline, using table moulded non modular bricks of class designation 50 in cement mortar 1:5, c.i cover withframe ( light duty ) 600x600mm 27 providing and filling sand in foundation upto plinth to required depth for sub soil treatment including watering ramming with all lead and lift complete as per specifications 28 providing and fixing granite flooring in combination of 19mm thick ( avg ) gang saw water cut lakared granite with 86% and with 14% of 19mm thicl ( avg ) black granite in cm 1:4 proportion with a coat of rough plastering using cm 1:4, cut to required shape, pattern with paper joints, finished with cement mortar using white cement and colour pigments to match the colour of slab making through jointing with sealant, grooves in joints including cost of curing etc., complete including cost and conveyance of all materials, labour for all items of work, hom of equipment etc., complete as per specification 29 providingandfixing msgrillfor doors / windows using ms square flats or m.s. square rods or combination of m.s flats and square rods or chequered plate covering or angular frame / tubular frame etc as perapproveddesign, & drawing includingcutting steelsections andwelding the sametorequiredpatternwithcoatofredlead primer, includingcuttingandmakinggood themasonry, cost of materials, fixtures, labour and homof machinerycompleteasper specification 30 supplying binding wire and fixing the same to angular support 31 repair of existing ms sliding gate cost of materials, fixtures, labour and homof machinerycompleteasper specification 32 removing old drains covers and removing deposited soil / slit from drain & clearing the blockage between two quadrangle including cost of materials, fixtures, labour and homof machinerycompleteasper specification...

Indira Gandhi National Centre For The Arts - Karnataka

40171384 tender for construction of public toilets at ignca, regional centre, bengaluru; 1 earth work in excavation by mechanical means ( hydraulic excavator ) / manual means in foundation trenches or drains ( not exceeding 1.5 m inwidth or 10 sqm on plan ) , including dressing of sides and ramming ofbottoms, lift upto 1.5 m, including getting out the excavated soil anddisposal of surplus excavated soil as directed, within a lead of 50 m. all kinds of soil. 2 half brick masonry with common burnt clay f.p.s. ( non modular ) bricksof class designation 7.5 in foundations and plinth in :cement mortar 1:3 ( 1 cement : 3 coarse sand ) cement mortar 1:4 ( 1 cement : 4 coarse sand ) 3 brick work with common burnt clay f.p.s. ( non modular ) bricks of classdesignation 7.5 in foundation and plinth in:cement mortar 1:4 ( 1 cement : 4 coarse sand ) 4 providing and laying in position cement concrete of specified gradeexcluding the cost of centering and shuttering all work up to plinth level : 1:5:10 ( 1 cement : 5 coarse sand ( zone iii ) derived from naturalsources : 10 graded stone aggregate 40 mm nominal sizederived from natural sources ) 5 cement plaster ( in coarse sand ) 12 mm cement plaster of mix : 1:4 ( 1 cement: 4 coarse sand ) sqm 6 15 mm cement plaster 1:4 ( 1 cement: 4 coarse sand ) 7 providing and fixing ist quality ceramic glazed wall tiles conforming tois: 15622 ( thickness to be specified by the manufacturer ) , of approvedmake, in all colours, shades except burgundy, bottle green, black ofany size as approved by engineer in charge, in skirting, risers of stepsand dados, over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3coarse sand ) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shadecomplete. 8 providing and laying antiskid vitrified floor tiles in different sizes ( thickness to bespecified by the manufacturer ) with water absorption less than 0.08%and conforming to is: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 ( 1 cement : 4 coarse sand ) , jointing with grey cement slurry @ 3.3 kg / sqm including grouting thejoints with white cement and matching pigments etc., complete.size of tile 300x300 mm 9 providing and fixingpolyvinyl chloride ( pvc ) pipes, having thermal stability for hot & cold water supply, including allpvc plain & brass threaded fittings, including fixing the pipe withclamps at 1.00 m spacing. this includes jointing of pipes & fittingswith one step pvc solvent cement and testing of joints completeas per direction of engineer in charge. 100 mm nominal dia pipes 10 providing and fixing chlorinated polyvinyl chloride ( cpvc ) pipes, having thermal stability for hot & cold water supply, including allcpvc plain & brass threaded fittings, including fixing the pipe withclamps at 1.00 m spacing. this includes jointing of pipes & fittingswith one step cpvc solvent cement and testing of joints completeas per direction of engineer in charge.20 mm nominal dia pipes 11 15 mm nominal dia pipe 12 providing and fixing c.p. brass angle valve for basin mixer and geyserpoints of approved quality conforming to is:8931 15mm nominal bore 13 providing and fixing c.p. brass long body bib cock of approved qualityconforming to is standards and weighing not less than 690 gms. 15 mm nominal bore 14 providing and fixing isi marked flush door shutters conforming to is :2202 ( part i ) non decorative type, core of block board construction withframe of 1st class hard wood and well matched commercial 3 plyveneering with vertical grains or cross bands and face veneers on bothfaces of shutters: 35 mm thick including isi marked stainless steel butt hingeswith necessary screws 15 providing and fixing water closet squatting pan ( indian type w.c.pan ) with 100 mm sand cast iron p or s trap, 10 litre low level whitep.v.c. flushing cistern, including flush pipe, with manually controlleddevice ( handle lever ) conforming to is : 7231, with all fittings andfixtures complete, including cutting and making good the walls andfloors wherever required:17.1.1 white vitreous china orissa pattern w.c. pan of size580x440 mm with integral type foot rests. 16 providing and fixing white vitreous china extended wall mountingwater closet of size 780x370x690 mm of approved shape includingproviding & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre / 6 litre ( adjustable to 4 litre / 8 litres ) , including seat cover, and cistern fittings, nuts, bolts and gasket etccomplete. 17 providing and fixing white vitreous china flat back half stall urinal ofsize 580x380x350 mm with white pvc automatic flushing cistern, with fittings, standard size c.p. brass flush pipe, spreaders withunions and clamps ( all in c.p. brass ) with waste fitting as per is :2556, c.i. trap with outlet grating and other couplings in c.p. brass, including painting of fittings and cutting and making good the wallsand floors wherever required :range of three half stall urinals with 10 litre p.v.c.automatic flushing cistern. 18 providing and fixing corner type wash basin with c.i. brackets, 15 mm c.p. brasspillar taps, 32 mm c.p. brass waste of standard pattern, includingpainting of fittings and brackets, cutting and making good the wallswherever require:white vitreous china wash basin size 630x450 mmwith a pair of 15 mm c.p. brass pillar taps 19 providing and applying white cement based putty of average thickness1 mm, of approved brand and manufacturer, over the plastered wallsurface to prepare the surface even and smooth complete. 20 distempering with oil bound washable distemper of approved brandand manufacture to give an even shade : new work ( two or more coats ) over and including waterthinnable priming coat with cement primer 21 finishing walls with water proofing cement paint of required shade :13.44.1 new work ( two or more coats applied @ 3.84 kg / 10 sqm ) sqm 97.60 22 cement concrete flooring 1:2:4 ( 1 cement : 2 coarse sand : 4 gradedstone aggregate ) finished with a floating coat of neat cement, includingcement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate 23 providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / appropriate z sections and other sections of approved make conforming to is: 733 and is: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required epdm rubber / neoprene gasket etc. aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling, c.p. brass / stainless steel screws, all complete as per architectural drawings and the directions of engineer in charge. ( glazing, paneling and dash fasteners to be paid for separately ) : for fixed portionpowder coated aluminium ( minimum thickness of powder coating 50 micron ) 24 for shutters of doors, windows & ventilators includingproviding and fixing hinges / pivots and making provisionfor fixing of fittings wherever required including the costof epdm rubber / neoprene gasket required ( fittingsshall be paid for separately ) 25 providing and fixing 12 mm thick prelaminated particle board flatpressed three layer or graded wood particle board conforming to is: 12823 grade l type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with c.p. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineerin chargepre laminated particle board with decorative lamination on both sides 26 providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with epdm rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer in charge .with float glass panes of 8 mm thickness ( weight notless than 20 kg / sqm ) sqm 27 providing and fixing aluminium tower bolts, isi marked, anodised ( anodic coating not less than grade ac 10 as per is : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :250x10 mm 28 providing and fixing brass 100mm mortice latch and lock with 6levers without pair of handles ( best make of approved quality ) foraluminium doors including necessary cutting and making good etc.complete. each 29 providing and fixing aluminium hanging floor door stopper, isi marked, anodised ( anodic coating not less than grade ac 10 as per is : 1868 ) transparent or dyed to required colour and shade, with necessary screws etc. complete.twin rubber stopper 30 providing and fixing aluminium die cast body tubular type universalhydraulic door closer ( having brand logo with isi, is : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm ) , with necessary accessories and screws etc. complete. 31 providing and fixing aluminium round shape handle of outer dia 100mm with ss screws etc. complete as per direction of engineer inchargepowder coated minimum thickness 50 micron aluminium 32 providing and fixing precoated galvanised iron profile sheets ( size, shape and pitch of corrugation as approved by engineer in charge ) 0.50 mm ( + 0.05 % ) total coated thickness with zinc coating 120grams per sqm as per is: 277, in 240 mpa steel grade, 5 7 micronsepoxy primer on both side of the sheet and polyester top coat 15 18microns. sheet should have protective guard film of 25 micronsminimum to avoid scratches during transportation and should besupplied in single length upto 12 metre or as desired by engineerin charge. the sheet shall be fixed using self drilling / self tappingscrews of size ( 5.5x 55 mm ) with epdm seal, complete upto anypitch in horizontal / vertical or curved surfaces, excluding the cost ofpurlins, rafters and trusses and including cutting to size and shapewherever required. 33 steel work in built up tubular ( round, square or rectangular hollow tubesetc. ) trusses etc., including cutting, hoisting, fixing in position andapplying a priming coat of approved steel primer, including welding andbolted with special shaped washers etc. complete.hot finished seamless type tubes 34 providing and fixing m.s. tubular frames for doors, windows, ventilatorsand cupboard with rectangular / l type sections, made of 1.60 mm thickm.s. sheet, joints mitred, welded and grinded finish, with profiles ofrequired size, including fixing of necessary butt hinges and screws andapplying a priming coat of approved steel primer.10.15.1 fixing with 15x3 mm lugs 10 cm long embedded in cementconcrete block 15x10x10 cm of c.c. 1:3:6 ( 1 cement : 3 coarsesand : 6 graded stone aggregate 20 mm nominal size ) kg 146.55 35 providing and fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel sections ( galvanising @ 120 grams per sqm including both side ) consisting of main ‘t’ runner suitably spaced at joints to get required length and of size24x38 mm made from 0.33 mm thick ( minimum ) sheet, spaced 1200 mm centre to centre, and cross “t” of size 24x28 mm made out of 0.33 mm ( minimum ) sheet, 1200 mm long spaced between main’t’ at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross ‘t’ of length 600 mm and size 24 x28 mmmade of 0.33 mm thick ( minimum ) sheet to be inter locked at middle of the 1200x 600 mm panel to from grid of size 600x600 mm, resting on periphery walls / partitions on a perimeter wall angle pre coated steel of size ( 24x24x3000 mm made of 0.40 mm thick ( minimum ) sheet with the help of rawl plugs at 450 mm centre to centre with 25 mm long dry wall screws @ 230 mm interval and laying 15 mm thick densified edges calicum silicate ceiling tiles of approved texture in the grid, including, cutting / making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required. main ‘t’ runners to be suspended from ceiling using g.i. slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm g.i. adjustable rods with galvanised steel level clips of size 85 x 30 x 0.8 mm, spaced at 1200 mm centre to centre along main ‘t’, bottom exposed with 24 mm of all tsections shall be pre painted with polyster baked paint, for all heights, as per specifications, drawings and as directed byengineer in charge. 36 providing and laying app ( atactic polypropylene polymer ) modifiedprefabricated five layer, 3 mm thick water proofing membrane, blackfinished reinforced with glass fibre matt consisting of a coat of bitumenprimer for bitumen membrane @ 0.40 litre / sqm by the samemembrane manufactured of density at 25°c, 0.87 0.89 kg / litre andviscocity 70 160 cps. over the primer coat the layer of membraneshall be laid using butane torch and sealing all joints etc., andpreparing the surface complete. the vital physical and chemicalparameters of the membrane shall be as under : joint strength inlongitudinal and transverse direction at 23°c as 350 / 300 n / 5 cm.tear strength in longitudinal and transverse direction as 60 / 80n.softening point of membrane not less than 150°c. cold flexibilityshall be upto 2°c when tested in accordance with astm, d 5147.the laying of membrane shall be got done through the authorisedapplicator of the manufacturer of membrane : 3 mm thick 37 painting with synthetic enamel paint of approved brand andmanufacture to give an even shade : two or more coats on new work. 38 electrical points: wire shall be used 1.5 mm for 5 amp, 2.5 mm for 15 amp & 4mm for main conection upto db, the quantity required as per no of fittings.electrical fittings 4 led tubelight, 2nos 5 amp points, 2 nos 300 mm ms exhaust fan ( as approved by engg incharge ) are to be supplied & providedmake wire polycab, havells, fittings& fixtures crabtree, havells, syska, philips, crompton...

South Western Railway - Karnataka

39980568 tender for sw i : electrical arrangements to provision of drinking water facility at goods loading / unloading area of smli, ytg and rnjp railway stations. ( 2 ) sw ii : electrical arrangements to provision of new station building at mariyammanahalli ( mmi ) . ( 3 ) sw iii : raising and extension of platform pf 1 to make it to high level of 560 m length with cement concrete flooring at hagaribommanahalli ( hbi ) station. ( 4 ) sw iv : electrical arrangements to improvements to platform surfaces at kgx, rlp, kbl, kgw, mrb, gnr, tngl, bay & vys stations ( total 09 stations ) ....

All India Institute Of Speech And Hearing - Karnataka

38952856 tender for renovation of gents hostel north east side block bathrooms and toilets ( 2nd phase ) at aiish panchavati campus, mysore. 1 civil items 2 dismantling tile work in floor and wall laid in cement or surki mortar including stacking the materials with in 50m lead of tiles thickness 10 25mm. including cost of materials, labour, hom complete as per specifications 3 removing of existing old or broken water closset indian / european and disposing it with all cost and conveyance, labour for all items of work, hom of equipment with all lead and lift, loading and unloading, transportation charges and all other incidental charges etc., complete as per specification and directions of the engineer in charge 4 removing of existing old or broken wash basin / urinals and disposing it with all cost and conveyance labour for all items of work, hom of equipment with all lead and lift, loading and unloading, transportation charges and all other incidental charges etc., complete as per specification and directions of the engineer in charge of the work 5 removing of existing old sanitary and plumbing pipelines, stacking and disposing it with all cost and conveyance, labour for all items of work, hom of equipment with all lead and lift, loading and unloading, transportation charges and all other incidental charges etc., complete as per specification and directions of the engineer in charge 6 dismantling cement concrete flooring or plain cement concrete work including removing and conveying the debris to distance upto 200m ( within average thickness of 15 cms ) . including cost of materials, labour, hom complete as per specifications 7 providing and fixing to wall, ceiling and floor un plasticised isi marked 110mm pvc pipes 10kg / sqcm working pressure chemp plast / waving or equivalent make with pipe fittings, wall clips, makinggood the wall, ceiling and floor including cost of materials, labour charges, hom ofequipments and testing complete as per specifications 8 providing and fixing isi marked 25mm dia. cpvc pipes conforming to is 15778 having thermal stability for hot and cold water supply including all cpvc plain brass threaded fittings, including fixing the pipe with clamp at 1.0m spacing.this includes jointing of pipes and fittings with one step cpvc solvent cement, & testing of joints complete. ( concealed work including cutting chasing and making good the walls etc. ) 9 providing and fixing isi marked 40mm dia chorinated poly venyl chloride ( cpvc ) pipes conforming to is 15778 having thermal stability for hot and cold water supply including all cpvc plain and brass threaded fittings, this includes jointing of pipes and fittings with one step solvent cement, trenching, refilling & testing of joints complete. ( external work ) . 40mm nominal od pipes 10 providing and fixing in position brass gate valve with c.i wheel of approved quality ( screwed end ) 25mm nominal bore including cost of all materials, labour and hom of equipments with all leads complete as per specifications 11 providing and fixing in position brass gate valve with c.i wheel of approved quality ( screwed end ) 40mm nominal bore including cost of all materials, labour and hom of equipments with all leads complete as per specifications 12 providing and fixing in position brass bib cock of approved quality 15mm nominal bore including cost of all materials, labour and hom of equipments with all leads complete as per specifications 13 providing and fixing in position brass stop cock of approved quality 15mm nominal bore including cost of all materials, labour and hom of equipments with all leads complete as per specifications 14 providing and fixing in position chromium plated brass shower rose with 15 or 20mm inlet 100mm dia including cost of all materials, labour and hom of equipments with all leads complete as per specifications 15 providing and fixing unplasticised pvc connection pipe with brass union 15mm nominal bore 450 mm length of pvc connection including cost of all materials, labour and hom of equipments with all leads complete as per specifications 16 providing and laying in position plain cement concrete of mix 1:2.:4 with cement @ 240kg with 20mm and down size: graded granite metal coarse aggregate @0.69cum and fine aggregates @ 0.459 cum, machine mixed, concrete laid in layers not exceeding 15cms thick, well compacted, in foundation plinth & cills, including cost of all materials, labour, hom of machinery, curing complete as per specifications 17 providing rough cement plastering 15mm thick in single coat with 1:4 cement mortar to brick masonry for base of dadooing works with sand of approved quality, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications 18 providing and fixing colour glazedtiles of size 300x450mm for walls with borders of size 300x100mm, set in cement mortar 1:3pointing with white cement mixed with matching colour pigment, including curing , cleaning etc., complete. the work includes cost of all materials, labour charges for all items of work, hire charges for equipment, etc., complete as per specification 19 providing and fixing ceramic tiles of size 30 x 30cms for flooring, treads & landing, laid on a bed of 20mm thick cement mortar 1:3 mix and spacer jointing filled with epoxy of matching colour pigment, including curing, cleaning etc., complete. the work includes cost of all materials, labour, curingcomplete as per specification 20 providing and fixing white vitreous china clay, water closet orissa pattern ( make: cera / parryware / hindware ) of size 580 x 440mm with integral type footrests, 100mm s or p trap, 10 litre low level, p.v.c flushing cistern ( all are approved make ) with fittings, c.i / m.s brackets, 32mm diameter flush pipe fittings and clamps, overflow arrangements with special and 25mm mosquito proof coupling of approved design, painting of fittings and brackets, cutting and making good the wall and floor wherever required, including cost of materials, labour complete as per specifications 21 providing and fixing white vitreous china clay, water closet european type ( make: cera / parryware / hindware ) ( pedestal type, p trap ) with black solid plastic seat and lid, c.p brass hinges, rubber buffers. 10 litre low level, p.v.c flushing cistern ( all are approved make ) with fittings, c.i / m.s brackets, 40mm diameter flush bend with fittings and clamps, overflow arrangements with special and 25mm mosquito proof coupling of approved design, painting of fittings and brackets, cutting and making good the wall and floor wherever required, including cost of materials, labour complete as per specifications 22 providing and fixing white vitreous china clay, surgeon type / table top wash basin ( make: cera / parryware / hindware ) size 660x460mm with a pair of 15mm c.p brass pillar taps with pair of elbow operated levers, c.i / m.s brackets, 32 mm c.p. brass waste of standard pattern, painting of fittings and brackets, cutting and making good the wall and floor wherever required, including cost of materials, labour complete as per specifications 23 providing and fixing white vitreous china clay, flat back, lipped front urinal basin ( make: cera / parryware / hindware ) of 430x260x350mm in the range of four with 10 litres pvc automatic flushing cistern, c.i / m.s brackets, standard flush pipe and c.p. brass spreaders with brass unions and g.i. clamps complete painting of fittings and brackets, cutting and making good the wall and floor wherever required, including cost of materials, labour complete as per specifications 24 providing integral crystaline waterproofing treatment to the sunken portion of toilets. using crystalline slurry of approved make @ 1.4kg per sqm in two coats ( 0.7 kg per sqm per coat ) conforming to astm c 1202 & dinv 18998 standards 25 providing and fixing c.p. brass towel rail 740mm length, 20mm dia with c.p brackets, fixed to wooden cleats with c.p. brass screws including cost of materials, labour complete as per specifications 26 providing and fixing 453x357mm dia rectangular shape mirror with plastic moulded frame of approved make and shade with 6mm thick hard board backing including cost of materials, labour complete as per specifications 27 providing and fixing ci nahani trap 10cms x 7.5cms of approved make conforming to isi specifications and construction of cistern in m 15 as per directions ( rate is inclusive of cost of materials and fixtures and conveyance of materials to work spot ) 28 providing and fixing 7.5 cms to 15.00 cms dia np grating 100 mm dia 29 wall bores in brick masonry upto 45 cm thick. including cost of materials, labour, hom complete as per specifications 30 construction of partition wall 11.2 cms thick with non modular ground moulded burnt bricks of class designation 3.5 newton per sqmm with cement mortar 1:4 inlcuding providing and fixing plaster mesh manufactured out of hot dipped galvanised iron of nominal thickness 0.35 mm. 100 mm. wide as per i.s. 2212 / 1991 at 7.5 m. c to c including cost of materials, labour charges, scaffolding, curing complete as per specifications 31 providing and applying two coats with plastic emulsion paint of approved brand and shade on ceilinginternal wall surface to give an even approved shade including scrapping, primer coat after thoroughly brooming the surface free from mortar drops and other foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour, and scaffolding etc., complete as per specifications & directions of the engineer in charge 32 providing and laying plat form using prepolished, water cut / gang saw 40mm thick telephonic black granite. laid on existing vertical supports and fixing in cm 1:3 proportion. including cutting to required shape, pattern with paper joints, including full rounding for nosing, finished with cement mortar, pointed with colour pigments to match the colour of slab making through jointing with sealant, making holes 25mm x 12mm grooves in joints including curing etc.., complete as per specifiaction 33 providing and fixing factory made single leaft rigid grp sandwich composite door shutter of 32mm thick, laminated with two grp skins with wood grain finish, fabricated using u.v stabilized isopthalic gelcoat and on layer of 45 gsm e glass chopped strand mat ( csm ) , impregnated with orthopthalic polyster resin. the thickness of the skins shall not be less than 1.5mm. expanded polystyrene ( eps ) structural foam panel of 29mm thickness and a density of 20 kg / m3 shall be used as core material. wooden reinforcements made of seasoned salwood block of cross section not less than 28mmx32mm and alsonecessary salwood reinforcements for fixing the metal fittings such as tower bolts, aldrops, handles, etc, shall be provided. a structural adhesive compatible with eps foam shall be used for bonding the core material, the salwood reinforcement and the skins. the material and process for manufacturing the door shutters shall confirm to rv / tifac composites design centre standards and specifications and the door shutters tested in confiramation to is 4020 1994. the finish of shutter will be plain colour white / ivory / beige / light grey or any other colour using high quality pigments. exclusing cost of fixtures and inclusive of supply of shutters to respective work spot 34 providing and fixing 65mmx90mm grp doorframe fabricated using e glass chopped strand mat ( csm ) . u.v stabilized isopthalic gelcoat and isopthalic resin. the thickness of the grp skin shall not be less than 2.0 mm. the doorframe consists of four segmens, which are provided with plug in socket arrangement in situ in the mould. the segments are plugged in and are joined together by means of screws. the grp frame shall be provided with wooden reinforcement of 6 locations fro high screw holding capacity for fixing metallic hold fast and shall be consolidated by filling with medium density foam / plaster with fibre reinforcement. six numbers of 260mmx25mmx5mm size s shaped m.s. flat hold fast shall be provided with the frame 35 constructing brick masonry inspection chamber 450mmx450mm and 450mm depth ( clear inside dimension ) for single pipe line using table moulded non modular bricks of class designation 50m in cement mortar 1:5, c.i.cover with frame ( light duty ) 450x450mm internal dimensions, total weight of cover with frame to be not less than 38kg ( weight of cover 23kgand frame 15kg ) rcc top slab with cement concrete1:2:4, foundation concrete 1:5:10, with 40mm downsize metal, inside plastering 12mm thick in cm 1:3, finish smooth with a floating coat of cement on walls and bed concrete complete as per standard design including cost of materials, labour charges, curing complete as per specification 36 constructing brick masonry inspection chamber 600x600mm, and 450mm depth, ( clear inside dimension ) for single pipeline, using table moulded non modular bricks of class designation 50 in cement mortar 1:5, c.i cover withframe ( light duty ) 600x600mm internal dimensions, total weight of cover with frame to be not less than 38 kg ( weight of cover 23kg and weight of frame 15 kg ) r.c.c. top slab with cement concrete m 15 with 20mm and downsize granite metal, foundation concrete m 5 with 40mm and downsize granite metal inside plastering 12mm thick with cement mortar 1:3, finish smooth with a floating coat of cement on walls and bed concrete complete as per standard design including cost of materials, labour charges, curing complete as per specifications. specification no. kbs 600x600mm and 450mm depth ( clear inside dimension ) for single pipeline, using table moulded non modular bricks of class designation 50 in cement mortar 1:5, c.i cover withframe ( light duty ) 600x600mm 37 providing & fixing of glazed 2 track 2 panel sliding windown with mesh made out of multi chambered upvc sections with tpv gaskets having isolated drainage and reinforced with gi throughtout the window. the sliding outer frame having a overall size of 108x45 mm with reinforcement of 1 mm thickness, sash with overall size of 39x58 mm with reinforcement of 1.5 mm thickness, mesh sash of overall size 30x48.5 mm reinforced with 1.5 mm of gi. glazing bead for fixing kof glass shall be of size 20x18mm and coextruded with gasket. fiber glass mesh shall be provided in mesh shutter. windows shall be provided with 5 mm plain float glass, standard hardware and single point locking system of flush lock. wall thickness of frame, mullion & sash shall be 2 2.2 mm 38 providingandfixing msgrillfor doors / windows using ms square flats or m.s. square rods or combination of m.s flats and square rods as perapproveddesign, & drawing includingcutting steelsections andwelding the sametorequiredpatternwithcoatofredlead primer, includingcuttingandmakinggood themasonry, cost of materials, fixtures, labour and homof machinerycompleteasper specification 39 epoxy based bonding adhesive for filling spacer joints of floor tiles...

Central Public Works Department - Karnataka

38399083 annual repair and maintenance of gpra domlur. sh: external and internal painting for type ii and type iii quarters and cement concrete flooring for badmiton court in hostel building at gpra domlur, bangalore...

South Western Railway - Karnataka

37383801 tender for hubballi division: raising of extension of platform pf 1 to make it to high level of 560m length with cement concrete flooring at hagribommanahalli ( hbi ) station...

Rural Development Panchayath Raj Engineering Department - Karnataka

36941297 supply of construction materials and machineries for the work of construction of cc road and drain in javagal and n.gollarahatti villages in arasikere taluk , plate compactor / vibrator, groove cutting machine, mechanical concrete mixer, vacume dewatering concrete flooring, centering and shuttering, vibratory roller or equivalant capacity smooth wheel road roller, water tanker 6kl capacity...

Rural Development Panchayath Raj Engineering Department - Karnataka

36730022 supply of construction materials and machineries for the work of construction of cc road and drain in maragondanahalli and k gollarahatti villages in arasikere taluk , mechanical concrete mixer, vacume dewatering concrete flooring, water tanker 6kl capacity, plate compactor / vibrator, groove cutting machine, vibratory roller or equivalant capacity smooth wheel road roller, centering and shuttering...

Rural Development Panchayath Raj Engineering Department - Karnataka

36702801 supply of construction materials and machineries for the work of construction of cc road and drain in s diggenalli villages in arasikere taluk supply of construction materials and machineries for the work of construction of cc road and drain in s diggenalli villages in arasikere taluk , plate compactor / vibrator, groove cutting machine, water tanker 6kl capacity, vibratory roller or equivalant capacity smooth wheel road roller, vacume dewatering concrete flooring, centering and shuttering, mechanical concrete mixer...

Rural Development Panchayath Raj Engineering Department - Karnataka

36682415 supply of construction materials and machineries for the work of construction of cc road and drain in gollaralli thandya, undiganalu and mudalinganakoppalu villages in arasikere taluk , vacume dewatering concrete flooring, water tanker 6kl capacity, plate compactor / vibrator, centering and shuttering, vibratory roller or equivalant capacity smooth wheel road roller, mechanical concrete mixer, groove cutting machine...

Rural Development Panchayath Raj Engineering Department - Karnataka

36682147 supply of construction materials and machineries for the work of construction of cc road and drain in kalanakoppalu, maladevighalli and guddenalli villages in arasikere taluk , vacume dewatering concrete flooring, centering and shuttering, vibratory roller or equivalant capacity smooth wheel road roller, water tanker 6kl capacity, groove cutting machine, mechanical concrete mixer, plate compactor / vibrator...

Krishna Bhagya Jala Nigam Limited - Karnataka

36249300 providing pure r.o ( reverse osmosis ) water plant ( 1 ) near revanasiddeshwar math in sc colony ( harijaankeri ) of ward no.2, ( 2 ) near anganawadi school in bhutanal tanda of ward no. 4 in vijayapur city of vijayapur district under scp head for the year 2021 22 on turnkey basis consisting survey, investigation, planning, design, supply, installation, testing and commissioning the work of of the following components 1 ) platform of ucrs masonry with cement concrete flooring 2 ) trapezoidal profiled galvo volume iron corrugated sheet on four sides and on roof with existing purlins, rafters, channels and trusses with epoxy primer on both sides along with polythene storage tanks 3 ) installation and commissioning of automatic water purification plant ( ro+uf ) with all accessories piping, product water tank on single phase power supply and connecting with high density polythene pies to draw the raw water from the source available. 4 ) providing & fixing corrugated g.s. sheet roofing including vertical / curved surface fixed with polymer coated j or l hooks. 5 ) placing on terrace ( at all floor levels ) polyethylene water storage tank. 6 ) pvc ringtite pipes , double glazed hermetically sealed glazing in aluminium windows.7 ) hescom portion : scope includes providing and adopting loop system with all necessaries like galvanized metal box, modular switch metal fan box wiring for lightening circuit breakers crca sheet metal body, heavy duty cable glands, earth electrodes, thermoplastic modular panel, etv etc fitting and connection etc.., complete with civil works as per kptcl / hescom norms. the entire work is including cost of materials, labour, hom of machinery complete, the work includes maintenance of entire system for period of 2 years from the date of commissioning. ( indent no23505 ) . survey investigation planning design supply installation testing and commissioning the work of providing pure r o ( reverse osmosis ) water plant ( 1 ) near revanasiddeshwar math in sc colony ( harijaankeri ) of ward no.2 ( 2 ) near anganawadi school in bhutanal tanda of ward no 4 in vijayapur city of vijayapur district under scp head for the year 2021 22 on turnkey basis...

Rural Development Panchayath Raj Engineering Department - Karnataka

36180540 supply of construction materials and machineries for the work of construction of cc road and drain in dasenahalli, g.mangalapura, halagenahalli and siddapura village in arasikere taluk , groove cutting machine, plate compactor / vibrator, vibratory roller or equivalant capacity smooth wheel road roller, mechanical concrete mixer, vacume dewatering concrete flooring, water tanker 6kl capacity, centering and shuttering...

Rural Development Panchayath Raj Engineering Department - Karnataka

36148618 supply of construction materials and machineries for the work of construction of cc road and drain in adhihalli, joganahalli, nandihalli,b.hosahalli and bageshpura village in arasikere taluk , vacume dewatering concrete flooring,groove cutting machine,water tanker 6kl capacity,vibratory roller or equivalant capacity smooth wheel road roller,plate compactor/vibrator,mechanical concrete mixer,centering and shuttering...

Rural Development Panchayath Raj Engineering Department - Karnataka

36142155 supply of construction materials and machineries for the work of construction of cc road and drain in naramanahalli koppalu, mylanahalli gollarahatti, ajjanahalli gollarahatti, ramasagara, gollarahalli gollarahatti kalkere village in arasikere taluk , water tanker 6kl capacity, groove cutting machine, vacume dewatering concrete flooring, plate compactor / vibrator, centering and shuttering, vibratory roller or equivalant capacity smooth wheel road roller, mechanical concrete mixer...

Rural Development Panchayath Raj Engineering Department - Karnataka

36142135 supply of construction materials and machineries for the work of construction of cc road and drain in nagenahalli gollarahatti and kenkere village in arasikere taluk , vacume dewatering concrete flooring, centering and shuttering, vibratory roller or equivalant capacity smooth wheel road roller, groove cutting machine, mechanical concrete mixer, plate compactor / vibrator, water tanker 6kl capacity...

Rural Development Panchayath Raj Engineering Department - Karnataka

36142119 supply of construction materials and machineries for the work of construction of cc road and drain in lakshmidevaralli, adhihalli, hosabandihalli, halebandihalli and haralakatta village in arasikere taluk , mechanical concrete mixer, plate compactor / vibrator, vacume dewatering concrete flooring, groove cutting machine, vibratory roller or equivalant capacity smooth wheel road roller, water tanker 6kl capacity, centering and shuttering...

Rural Development Panchayath Raj Engineering Department - Karnataka

36137840 supply of construction materials and machineries for the work of construction of cc road and drain in murundi, yadapura and sankondanahalli village in arasikere taluk , water tanker 6kl capacity, vacume dewatering concrete flooring, groove cutting machine, centering and shuttering, plate compactor / vibrator, vibratory roller or equivalant capacity smooth wheel road roller, mechanical concrete mixer...

Rural Development Panchayath Raj Engineering Department - Karnataka

36137837 supply of construction materials and machineries for the work of construction of cc road and drain in kenchenalli and baglaghatta village in arasikere taluk , groove cutting machine, vibratory roller or equivalant capacity smooth wheel road roller, mechanical concrete mixer, water tanker 6kl capacity, centering and shuttering, plate compactor / vibrator, vacume dewatering concrete flooring...

Rural Development Panchayath Raj Engineering Department - Karnataka

36137828 supply of construction materials and machineries for the work of construction of cc road and drain in kanakanchenahalli, kodikoppalu and thirupathihalli village in arasikere taluk , vibratory roller or equivalant capacity smooth wheel road roller, water tanker 6kl capacity, plate compactor / vibrator, centering and shuttering, mechanical concrete mixer, vacume dewatering concrete flooring, groove cutting machine...

Rural Development Panchayath Raj Engineering Department - Karnataka

36073389 supply of construction materials and machineries for the work of construction of cc road and drain in for the road from kurubarahalli thanda to byragondanahalli sc colony road in arasikere taluk , water tanker 6kl capacity, mechanical concrete mixer, vibratory roller or equivalant capacity smooth wheel road roller, centering and shuttering, vacume dewatering concrete flooring, plate compactor / vibrator, groove cutting machine...

Rural Development Panchayath Raj Engineering Department - Karnataka

36063377 supply of construction materials and machineries for the work of construction of conrete road and drain dasihalli, lakshmidevarahalli and sulekere village in arasikere taluk supply of construction materials and machineries for the work of construction of concrete road and drain dasihalli, lakshmidevarahalli and sulekere village in arasikere taluk , vibratory roller or equivalant capacity smooth wheel road roller, plate compactor / vibrator, centering and shuttering, mechanical concrete mixer, vacume dewatering concrete flooring, groove cutting machine, water tanker 6kl capacity...

Rural Development Panchayath Raj Engineering Department - Karnataka

35943409 supply of construction materials and machinery for the work of construction of cc road and drain in dasihalli, aggunda, siddarahalli and aggunda gollarahatti village in arasikere taluk , vacume dewatering concrete flooring, centering and shuttering, groove cutting machine, vibratory roller or equivalant capacity smooth wheel road roller, mechanical concrete mixer, plate compactor / vibrator, water tanker 6kl capacity...

Krishna Bhagya Jala Nigam Limited - Karnataka

35834066 tender for providing pure r.o ( reverse osmosis ) water plant ( 1 ) near revanasiddeshwar math in sc colony ( harijaankeri ) of ward no.2, ( 2 ) near anganawadi school in bhutanal tanda of ward no. 4 in vijayapur city of vijayapur district under scp head for the year 2021 22 on turnkey basis consisting survey, investigation, planning, design, supply, installation, testing and commissioning the work of of the following components 1 ) platform of ucrs masonry with cement concrete flooring 2 ) trapezoidal profiled galvo volume iron corrugated sheet on four sides and on roof with existing purlins, rafters, channels and trusses with epoxy primer on both sides along with polythene storage tanks 3 ) installation and commissioning of automatic water purification plant ( ro+uf ) with all accessories piping, product water tank on single phase power supply and connecting with high density polythene pies to draw the raw water from the source available. 4 ) providing & fixing corrugated g.s. sheet roofing including vertical / curved surface fixed with polymer coated j or l hooks. 5 ) placing on terrace ( at all floor levels ) polyethylene water storage tank. 6 ) pvc ringtite pipes , double glazed hermetically sealed glazing in aluminium windows.7 ) hescom portion : scope includes providing and adopting loop system with all necessaries like galvanized metal box, modular switch metal fan box wiring for lightening circuit breakers crca sheet metal body, heavy duty cable glands, earth electrodes, thermoplastic modular panel, etv etc fitting and connection etc.., complete with civil works as per kptcl / hescom norms. the entire work is including cost of materials, labour, hom of machinery complete, the work includes maintenance of entire system for period of 2 years from the date of commissioning. ( indent no23505 ) . survey investigation planning design supply installation testing and commissioning the work of providing pure r o ( reverse osmosis ) water plant ( 1 ) near revanasiddeshwar math in sc colony ( harijaankeri ) of ward no.2 ( 2 ) near anganawadi school in bhutanal tanda of ward no 4 in vijayapur city of vijayapur district under scp head for the year 2021 22 on turnkey basis...

Rural Development Panchayath Raj Engineering Department - Karnataka

35565504 supply of construction materials and machineries for the work of construction of concrete road and drain in yarehalli, byadarahalli gollarahatti and maratagere bhovi colony village in arasikere taluk , plate compactor/vibrator,centering and shuttering,vibratory roller or equivalant capacity smooth wheel road roller,mechanical concrete mixer,vacume dewatering concrete flooring,water tanker 6kl capacity,groove cutting machine...

Rural Development Panchayath Raj Engineering Department - Karnataka

35565503 supply of construction materials and machineries for the work of construction of concrete road and drain in rudranahalli village in arasikere taluk , water tanker 6kl capacity, plate compactor / vibrator, mechanical concrete mixer, vacume dewatering concrete flooring, centering and shuttering, vibratory roller or equivalant capacity smooth wheel road roller, groove cutting machine...

Rural Development Panchayath Raj Engineering Department - Karnataka

35565500 supply of construction materials and machineries for the work of construction of conrete road and drain dasihalli, lakshmidevarahalli and sulekere village in arasikere taluk supply of construction materials and machineries for the work of construction of conrete road and drain dasihalli, lakshmidevarahalli and sulekere village in arasikere taluk , plate compactor / vibrator, centering and shuttering, mechanical concrete mixer, groove cutting machine, water tanker 6kl capacity, vacume dewatering concrete flooring, vibratory roller or equivalant capacity smooth wheel road roller...

Rural Development Panchayath Raj Engineering Department - Karnataka

35562950 supply of construction materials and machineries for the work of h. mangalapura, chikkagandasi and bachenahalli village in arasikere taluk , vibratory roller or equivalant capacity smooth wheel road roller,mechanical concrete mixer,plate compactor/vibrator,vacume dewatering concrete flooring,groove cutting machine,centering and shuttering,water tanker 6kl capacity...

Rural Development Panchayath Raj Engineering Department - Karnataka

35562929 supply of construction materials and machineries for the work of construction of cc road and drain in uppinahalli, devagondana halli to layalapura road, manakathur and basavanahalli village village in arasikere taluk supply of construction materials and machineries for the work of construction of cc road and drain in uppinahalli, devagondanahalli to layalapura road, manakathur and basavanahalli village village in arasikere taluk , groove cutting machine, vacume dewatering concrete flooring, centering and shuttering, plate compactor / vibrator, mechanical concrete mixer, water tanker 6kl capacity, vibratory roller or equivalant capacity smooth wheel road roller...

Rural Development Panchayath Raj Engineering Department - Karnataka

35562918 supply of construction materials and machineries for the work of banavara, c.hariharapura and karboranahatti village in arasikere taluk , groove cutting machine, mechanical concrete mixer, water tanker 6kl capacity, centering and shuttering, vibratory roller or equivalant capacity smooth wheel road roller, plate compactor / vibrator, vacume dewatering concrete flooring...

Rural Development Panchayath Raj Engineering Department - Karnataka

35468308 supply of construction materials and machineries for the work of construction of cc road and drain in chikkarehalli sc colony and keeranayakanahatti thandya in arasikere taluk , water tanker 6kl capacity,vibratory roller or equivalant capacity smooth wheel road roller,centering and shuttering,groove cutting machine,mechanical concrete mixer,vacume dewatering concrete flooring,plate compactor/vibrator...

Rural Development Panchayath Raj Engineering Department - Karnataka

35468280 supply of construction materials and machineries for the work of construction of cc road and drain for theerthamalleshwara hill to kenchenahalli sc colony road in arasikere taluk , plate compactor / vibrator, vibratory roller or equivalant capacity smooth wheel road roller, vacume dewatering concrete flooring, centering and shuttering, mechanical concrete mixer, water tanker 6kl capacity, groove cutting machine...

Mysore Electrical Industrial Limited - Karnataka

35380158 tender for dismantling of existing kerb stones, providing and fixing of rcc kerb stones with providing and laying concrete flooring including removal of roof sheet in shed beside metal fabrication department with construction of platform for ambedkar statue in admin block....

Rural Development Panchayath Raj Engineering Department - Karnataka

35340451 supply of construction materials and machineries for the work of construction of cc road and drain in kamasamudra, paduvanahalli gollarahatti and yarigenahalli village in arasikere taluk , centering and shuttering, groove cutting machine, water tanker 6kl capacity, vacume dewatering concrete flooring, plate compactor / vibrator, vibratory roller or equivalant capacity smooth wheel road roller, mechanical concrete mixer...

Rural Development Panchayath Raj Engineering Department - Karnataka

35340449 supply of construction materials and machineries for the work of construction of cc road and drain in j.c. pura , nagavedi and chikkahalkur gollarahatti village in arasikere taluk , mechanical concrete mixer, centering and shuttering, vacume dewatering concrete flooring, water tanker 6kl capacity, plate compactor / vibrator, groove cutting machine, vibratory roller or equivalant capacity smooth wheel road roller...

Rural Development Panchayath Raj Engineering Department - Karnataka

35340448 supply of construction materials and machineries for the work of construction of cc road and drain in maddarahalli and yarehalli gollarahatti village in arasikere taluk , mechanical concrete mixer, groove cutting machine, vacume dewatering concrete flooring, plate compactor / vibrator, water tanker 6kl capacity, centering and shuttering, vibratory roller or equivalant capacity smooth wheel road roller...

Rural Development Panchayath Raj Engineering Department - Karnataka

35338904 supply of construction materials and machineries for the work of construction of cc road and drain in nanjanaikana koppalu, mylanahalli, anandanahalli and kondavagilu village in arasikere taluk , groove cutting machine, plate compactor / vibrator, mechanical concrete mixer, water tanker 6kl capacity, vacume dewatering concrete flooring, vibratory roller or equivalant capacity smooth wheel road roller, centering and shuttering...

Rural Development Panchayath Raj Engineering Department - Karnataka

35338896 supply of construction materials and machineries for the work of construction of cc road and drain in karadihalli, ahamadpura, narasipura and honnakatta gollarahatti village in arasikere taluk supply of construction materials and machineries for the work of construction of cc road and drain in karadihalli, ahamadpura, narasipura and honnakatta gollarahatti village in arasikere taluk , centering and shuttering, groove cutting machine, mechanical concrete mixer, vacume dewatering concrete flooring, water tanker 6kl capacity, vibratory roller or equivalant capacity smooth wheel road roller, plate compactor / vibrator...

Rural Development Panchayath Raj Engineering Department - Karnataka

35338894 supply of construction materials and machineries for the work of construction of cc road and drain in kanakatte, magenahalli, chikkondihalli and bommasamudra village in arasikere taluk , vibratory roller or equivalant capacity smooth wheel road roller, centering and shuttering, plate compactor / vibrator, vacume dewatering concrete flooring, groove cutting machine, water tanker 6kl capacity, mechanical concrete mixer...

Rural Development Panchayath Raj Engineering Department - Karnataka

35338881 supply of construction materials and machineries for the work of construction of cc road and drain in kyathanahalli, soppinahalli, p hosahalli and chikkahalkur village in arasikere taluk , mechanical concrete mixer, vibratory roller or equivalant capacity smooth wheel road roller, vacume dewatering concrete flooring, plate compactor / vibrator, centering and shuttering, groove cutting machine, water tanker 6kl capacity...