Karnataka State Forest Industries Corporation Limited - Karnataka

34202795 detailed e tender terms & conditions for supply of machineries for production of block boards and flush doors. machineries for block board and flush doors , seasoning kiln steam 500 cft,cross cutting machine,gang rip saw,glue spreader machine,hot press machine 10 daylight,hydralic lift...

Directorate Of Purchase And Stores - Karnataka

32485814 supply of spares for 50 ton hot press , make m / s. hhv co. pvt. ltd. bangalore , pneumatically operated right angle valve model rpv 350. , pneumatic cylinder for right angle valve model rpv 350....

Karnataka Pollution Control Board - Karnataka

26307186 providing executive chair, office chairs and sofa sets to minister office for forest, ecology and environment,vikasa soudha, banglaoregoods/equipment 1. supply of pure leather chairs:the seat and back to be made up of upholstered with pure leather and polyuthene foam together with moulded abs seat and back covers. tilting bolt made from pressure die cast of lm 6 aluminium alloy and ms plate. tilt can be adjusted by tightening spring tension manually. self skinned pu/leather arm with parting lines on side of the arm. this does not hurt the elbows and arms are leather chair to be scratch free ,suspa gas lift for height adjustment mechanism, spring loaded gas lift for adjusting the height of seat( model tycon/featherlitr make and model.no.cs 6031e brown colour pure leather), 2. supply of pure leatherlite chairs:the seat and back to be made up of upholstered with pure leather and polyuthene foam together with moulded abs seat and back covers. tilting bolt made from pressure die cast of lm 6 aluminium alloy and ms plate. tilt can be adjusted by tightening spring tension manually. self skinned pu/leather arm with parting lines on side of the arm. this does not hurt the elbows and arms are leather chair to be scratch free ,suspa gas lift for height adjustment mechanism, spring loaded gas lift for adjusting the height of seat( model tycon/featherlitr make , model.no.000614 hf 366 1 tycon mb brown colour leatherlite mb), 3. visitor chair: the seat is made up of 1.4 plus or minus 0.1 chick hot press 4 plywood upholstered with fabric and moulded polyurethane foam. it has a seat depth adjustment of 5.0plus or minus 0.3 cm integrated in the seat through a sliding mechanism. seat size: 50.0cm (w)x 49.0cm(d).the back is injection moulded in glass filled polyamide which is upholstered with mesh fabric. the back consist of adjustable lumbar support made of injection moulded polypropylene having an adjustment of 6.0plus or minus 0.1cm.backsize: 50.0cm(w) x68.0 cm(h). the mechanism is designed with the following features:• 360 degree revolving type.• centre tilt synchro• 3 position (including upright lock) giving option of variable tilt angle to the chair with anti shock feature. . 76(w)* 76(d)* 100 109(h)* 45 54(sh). make: featherlite mode forum sb chrome vfrmsbbv40m00af877z v forum, 4. chair: the seat is made up of 1.4plus or minus 0.1 chick hot press 4 plywood upholstered with fabric and moulded polyurethane foam. it has a seat depth adjustment of 5.0plus or minus 0.3 cm integrated in the seat through a sliding mechanism. seat size: 50.0cm (w)x 49.0cm(d).the back is injection moulded in glass filled polyamide which is upholstered with mesh fabric. the back consist of adjustable lumbar support made of injection moulded polypropylene having an adjustment of 6.0plus or minus 0.1cm.backsize: 50.0cm(w) x68.0 cm(h). the mechanism is designed with the following features:• 360 degree revolving type.• centre tilt synchro• 3 position (including upright lock) giving option of variable tilt angle to the chair with anti shock feature. . 76(w)* 76(d)* 100 109(h)* 45 54(sh). make: featherlite model vinvsbbs20m00af66zzz v invention visitor sb sledge base chrome plated arns fxd black leatherlitr chair. make featherlite mb, 5. sofa: providing and supplying of sofas: width (w): 205.5 cm. depth (d): 75.0 cm. height (h):70.0 cm. seat height (sh): 45.0 cm.seat foam: the seat should be made of pu foam with density 32 plus or minus 2 kg/cu.mtr having an additional top layer of j pu foam with density 28 plus or minus 2 kg/cu. seat should be upholstered with fabric or leatherette. 2) back foam: the back should be made of pu foam with density 28 plus or minus 2 kg/cu. mtr with two additional top layer of supersoft foam of density 23 plus or minus 2 kg/cu. mtr, upholstered with fabric or leatherette understructre : understructure should be made up of 1.2 plus or minus 0.1 cm. thick hot pressed plywood ocp qlta pl14 18 4. dia 4mm zigzag spring assembly should be mounted in understructure for support and additional cushioning purpose leg assembly: it should be a welded assembly made in stainless steel (grade ss 202) tube & plate. made of pu foam with density 28 plus or minus 2 kg/cu. mtr with two additional top layer of supersoft foam of density 23 plus or minus 2 kg/cu. mtr, upholstered with fabric or leatherette understructre : understructure should be made up of 1.2 plus or minus 0.1 cm. thick hot pressed plywood ocp qlta pl14 18 4. dia 4mm zigzag spring assembly should be mounted in understructure for support and additional cushioning purpose leg assembly: it should be a welded assembly made in stainless steel (grade ss 202) tube & plate. featherlite sofa(white finish)). featherlite make model 238 3s ms white 3 seater (pearl), 6. sofa: providing and supplying of sofas: width (w): 205.5 cm. depth (d): 75.0 cm. height (h):70.0 cm. seat height (sh): 45.0 cm.seat foam: the seat should be made of pu foam with density 32 plus or minus 2 kg/cu.mtr having an additional top layer of j pu foam with density 28 plus or minus 2 kg/cu. seat should be upholstered with fabric or leatherette. 2) back foam: the back should be made of pu foam with density 28 plus or minus 2 kg/cu. mtr with two additional top layer of supersoft foam of density 23 plus or minus 2 kg/cu. mtr, upholstered with fabric or leatherette understructre : understructure should be made up of 1.2 plus or minus 0.1 cm. thick hot pressed plywood ocp qlta pl14 18 4. dia 4mm zigzag spring assembly should be mounted in understructure for support and additional cushioning purpose leg assembly: it should be a welded assembly made in stainless steel (grade ss 202) tube & plate. made of pu foam with density 28 plus or minus 2 kg/cu. mtr with two additional top layer of supersoft foam of density 23 plus or minus 2 kg/cu. mtr, upholstered with fabric or leatherette understructre : understructure should be made up of 1.2 plus or minus 0.1 cm. thick hot pressed plywood ocp qlta pl14 18 4. dia 4mm zigzag spring assembly should be mounted in understructure for support and additional cushioning purpose leg assembly: it should be a welded assembly made in stainless steel (grade ss 202) tube & plate. featherlite sofa(white finish)). featherlite make model 238 2s ms white 2 seater (pearl), 7. sofa: providing and supplying of sofas: width (w): 205.5 cm. depth (d): 92.0 cm. height (h): 82.0 cm. seat height (sh): 45.0 cm.seat foam: the seat should be made of pu foam with density 32 plus or minus 2 kg/cu.mtr having an additional top layer of j pu foam with density 28 plus or minus 2 kg/cu. seat should be upholstered with fabric or leatherette. 2) back foam: the back should be made of pu foam with density 28 plus or minus 2 kg/cu. mtr with two additional top layer of supersoft foam of density 23 plus or minus 2 kg/cu. mtr, upholstered with fabric or leatherette understructre : understructure should be made up of 1.2 plus or minus 0.1 cm. thick hot pressed plywood ocp qlta pl14 18 4. dia 4mm zigzag spring assembly should be mounted in understructure for support and additional cushioning purpose leg assembly: it should be a welded assembly made in stainless steel (grade ss 202) tube & plate. made of pu foam with density 28 plus or minus 2 kg/cu. mtr with two additional top layer of supersoft foam of density 23 plus or minus 2 kg/cu. mtr, upholstered with fabric or leatherette understructre : understructure should be made up of 1.2plus or minus 0.1 cm. thick hot pressed plywood ocp qlta pl14 18 4. dia 4mm zigzag spring assembly should be mounted in understructure for support and additional cushioning purpose leg assembly: it should be a welded assembly made in stainless steel (grade ss 202) tube & plate. featherlite sofa. feather lite make model s 900 3s ms brown 3 seater (converse model), 8. sofa: providing and supplying of sofas:width (w): 146.0 cm. depth (d): 92.0 cm. height (h): 82.0 cm. seat height (sh): 45.0 cm.seat foam: the seat should be made of pu foam with density 32 plus or minus 2 kg/cu.mtr having an additional top layer of j pu foam with density 28 plus or minus 2 kg/cu. seat should be upholstered with fabric or leatherette. 2) back foam: the back should be made of pu foam with density 28 plus or minus 2 kg/cu. mtr with two additional top layer of supersoft foam of density 23 plus or minus 2 kg/cu. mtr, upholstered with fabric or leatherette understructre : understructure should be made up of 1.2 plus or minus 0.1 cm. thick hot pressed plywood ocp qlta pl14 18 4. dia 4mm zigzag spring assembly should be mounted in understructure for support and additional cushioning purpose leg assembly: it should be a welded assembly made in stainless steel (grade ss 202) tube & plate... model featherlite sofa (white finish)). godrej/feather lite make model 238 1s ms 2s ms white color single seater white color.(pearl model), 9. sofa 1 seater brown color: width (w): 87.0 cm. depth (d): 82.0 cm. height (h): 82.0 cm. seat height (sh): 45.0 cm.seat foam: the seat should be made of pu foam with density 32 plus or minus 2 kg/cu.mtr having an additional top layer of j pu foam with density 28 plus or minus 2 kg/cu. seat should be upholstered with fabric or leatherette. 2) back foam: the back should be made of pu foam with density 28 plus or minus 2 kg/cu. mtr with two additional top layer of supersoft foam of density 23 plus or minus 2 kg/cu. mtr, upholstered with fabric or leatherette understructre : understructure should be made up of 1.2 plus or minus 0.1 cm. thick hot pressed plywood ocp qlta pl14 18 4. dia 4mm zigzag spring assembly should be mounted in understructure for support and additional cushioning purpose leg assembly: it should be a welded assembly made in stainless steel (grade ss 202) tube & plate..pisa godrej/interact featherlite sofa(wood finish)).godrej/ featherlite make model s 900 1s ms 1 seater brown color(converse model), 10. sofa 2 seater brown color: width (w): 87.0 cm. depth (d): 82.0 cm. height (h): 82.0 cm. seat height (sh): 45.0 cm.seat foam: the seat should be made of pu foam with density 32 plus or minus 2 kg/cu.mtr having an additional top layer of j pu foam with density 28 plus or minus 2 kg/cu. seat should be upholstered with fabric or leatherette. 2) back foam: the back should be made of pu foam with density 28 plus or minus 2 kg/cu. mtr with two additional top layer of supersoft foam of density 23 plus or minus 2 kg/cu. mtr, upholstered with fabric or leatherette understructre : understructure should be made up of 1.2 plus or minus 0.1 cm. thick hot pressed plywood ocp qlta pl14 18 4. dia 4mm zigzag spring assembly should be mounted in understructure for support and additional cushioning purpose leg assembly: it should be a welded assembly made in stainless steel (grade ss 202) tube & plate..featherlite sofa(brown color).featherlite make model s 900 2s ms 2seater brown color(converse model), 11. centre table:width of table= 120.0 cm, depth=77.0 cm, height=33 cm. should be a center table glass : it should be 12 plus or minus 0.3 mm thick black tinted toughened glass uv glued with bushes made in ss 202 grade for fixing with understructure. pshould be a center table understructure : centre table should be1200wx770dx330h. model: featherlite make evan centre table, 12. chair: the seat is made up of 1.4 plus or minus 0.1 chick hot press 4 plywood upholstered with fabric and moulded polyurethane foam. it has a seat depth adjustment of 5.0 plus or minus 0.3 cm integrated in the seat through a sliding mechanism. seat size: 50.0cm (w)x 49.0cm(d).the back is injection moulded in glass filled polyamide which is upholstered with mesh fabric. the back consist of adjustable lumbar support made of injection moulded polypropylene having an adjustment of 6.0 plus or minus 0.1cm.backsize: 50.0cm(w) x68.0 cm(h). the mechanism is designed with the following features:• 360 degree revolving type.• centre tilt synchro• 3 position (including upright lock) giving option of variable tilt angle to the chair with anti shock feature. make: featherlite model item 0000542 oc 1 optima high back mesh chair with head rest, ...

Karnataka Pollution Control Board - Karnataka

25961686 providing executive chair, office chairs and sofa sets to minister office for forest, ecology and environment,vikasa soudha, banglaoregoods/equipment 1. supply of pure leather chairs:the seat and back to be made up of upholstered with pure leather and polyuthene foam together with moulded abs seat and back covers. tilting bolt made from pressure die cast of lm 6 aluminium alloy and ms plate. tilt can be adjusted by tightening spring tension manually. self skinned pu/leather arm with parting lines on side of the arm. this does not hurt the elbows and arms are leather chair to be scratch free ,suspa gas lift for height adjustment mechanism, spring loaded gas lift for adjusting the height of seat( model tycon/featherlitr make and model.no.cs 6031e brown colour pure leather), 2. supply of pure leatherlite chairs:the seat and back to be made up of upholstered with pure leather and polyuthene foam together with moulded abs seat and back covers. tilting bolt made from pressure die cast of lm 6 aluminium alloy and ms plate. tilt can be adjusted by tightening spring tension manually. self skinned pu/leather arm with parting lines on side of the arm. this does not hurt the elbows and arms are leather chair to be scratch free ,suspa gas lift for height adjustment mechanism, spring loaded gas lift for adjusting the height of seat( model tycon/featherlitr make , model.no.000614 hf 366 1 tycon mb brown colour leatherlite mb), 3. visitor chair: the seat is made up of 1.4 plus or minus 0.1 chick hot press 4 plywood upholstered with fabric and moulded polyurethane foam. it has a seat depth adjustment of 5.0plus or minus 0.3 cm integrated in the seat through a sliding mechanism. seat size: 50.0cm (w)x 49.0cm(d).the back is injection moulded in glass filled polyamide which is upholstered with mesh fabric. the back consist of adjustable lumbar support made of injection moulded polypropylene having an adjustment of 6.0plus or minus 0.1cm.backsize: 50.0cm(w) x68.0 cm(h). the mechanism is designed with the following features:• 360 degree revolving type.• centre tilt synchro• 3 position (including upright lock) giving option of variable tilt angle to the chair with anti shock feature. . 76(w)* 76(d)* 100 109(h)* 45 54(sh). make: featherlite mode forum sb chrome vfrmsbbv40m00af877z v forum, 4. chair: the seat is made up of 1.4plus or minus 0.1 chick hot press 4 plywood upholstered with fabric and moulded polyurethane foam. it has a seat depth adjustment of 5.0plus or minus 0.3 cm integrated in the seat through a sliding mechanism. seat size: 50.0cm (w)x 49.0cm(d).the back is injection moulded in glass filled polyamide which is upholstered with mesh fabric. the back consist of adjustable lumbar support made of injection moulded polypropylene having an adjustment of 6.0plus or minus 0.1cm.backsize: 50.0cm(w) x68.0 cm(h). the mechanism is designed with the following features:• 360 degree revolving type.• centre tilt synchro• 3 position (including upright lock) giving option of variable tilt angle to the chair with anti shock feature. . 76(w)* 76(d)* 100 109(h)* 45 54(sh). make: featherlite model vinvsbbs20m00af66zzz v invention visitor sb sledge base chrome plated arns fxd black leatherlitr chair. make featherlite mb, 5. sofa: providing and supplying of sofas: width (w): 205.5 cm. depth (d): 75.0 cm. height (h):70.0 cm. seat height (sh): 45.0 cm.seat foam: the seat should be made of pu foam with density 32 plus or minus 2 kg/cu.mtr having an additional top layer of j pu foam with density 28 plus or minus 2 kg/cu. seat should be upholstered with fabric or leatherette. 2) back foam: the back should be made of pu foam with density 28 plus or minus 2 kg/cu. mtr with two additional top layer of supersoft foam of density 23 plus or minus 2 kg/cu. mtr, upholstered with fabric or leatherette understructre : understructure should be made up of 1.2 plus or minus 0.1 cm. thick hot pressed plywood ocp qlta pl14 18 4. dia 4mm zigzag spring assembly should be mounted in understructure for support and additional cushioning purpose leg assembly: it should be a welded assembly made in stainless steel (grade ss 202) tube & plate. made of pu foam with density 28 plus or minus 2 kg/cu. mtr with two additional top layer of supersoft foam of density 23 plus or minus 2 kg/cu. mtr, upholstered with fabric or leatherette understructre : understructure should be made up of 1.2 plus or minus 0.1 cm. thick hot pressed plywood ocp qlta pl14 18 4. dia 4mm zigzag spring assembly should be mounted in understructure for support and additional cushioning purpose leg assembly: it should be a welded assembly made in stainless steel (grade ss 202) tube & plate. featherlite sofa(white finish)). featherlite make model 238 3s ms white 3 seater (pearl), 6. sofa: providing and supplying of sofas: width (w): 205.5 cm. depth (d): 75.0 cm. height (h):70.0 cm. seat height (sh): 45.0 cm.seat foam: the seat should be made of pu foam with density 32 plus or minus 2 kg/cu.mtr having an additional top layer of j pu foam with density 28 plus or minus 2 kg/cu. seat should be upholstered with fabric or leatherette. 2) back foam: the back should be made of pu foam with density 28 plus or minus 2 kg/cu. mtr with two additional top layer of supersoft foam of density 23 plus or minus 2 kg/cu. mtr, upholstered with fabric or leatherette understructre : understructure should be made up of 1.2 plus or minus 0.1 cm. thick hot pressed plywood ocp qlta pl14 18 4. dia 4mm zigzag spring assembly should be mounted in understructure for support and additional cushioning purpose leg assembly: it should be a welded assembly made in stainless steel (grade ss 202) tube & plate. made of pu foam with density 28 plus or minus 2 kg/cu. mtr with two additional top layer of supersoft foam of density 23 plus or minus 2 kg/cu. mtr, upholstered with fabric or leatherette understructre : understructure should be made up of 1.2 plus or minus 0.1 cm. thick hot pressed plywood ocp qlta pl14 18 4. dia 4mm zigzag spring assembly should be mounted in understructure for support and additional cushioning purpose leg assembly: it should be a welded assembly made in stainless steel (grade ss 202) tube & plate. featherlite sofa(white finish)). featherlite make model 238 2s ms white 2 seater (pearl), 7. sofa: providing and supplying of sofas: width (w): 205.5 cm. depth (d): 92.0 cm. height (h): 82.0 cm. seat height (sh): 45.0 cm.seat foam: the seat should be made of pu foam with density 32 plus or minus 2 kg/cu.mtr having an additional top layer of j pu foam with density 28 plus or minus 2 kg/cu. seat should be upholstered with fabric or leatherette. 2) back foam: the back should be made of pu foam with density 28 plus or minus 2 kg/cu. mtr with two additional top layer of supersoft foam of density 23 plus or minus 2 kg/cu. mtr, upholstered with fabric or leatherette understructre : understructure should be made up of 1.2 plus or minus 0.1 cm. thick hot pressed plywood ocp qlta pl14 18 4. dia 4mm zigzag spring assembly should be mounted in understructure for support and additional cushioning purpose leg assembly: it should be a welded assembly made in stainless steel (grade ss 202) tube & plate. made of pu foam with density 28 plus or minus 2 kg/cu. mtr with two additional top layer of supersoft foam of density 23 plus or minus 2 kg/cu. mtr, upholstered with fabric or leatherette understructre : understructure should be made up of 1.2plus or minus 0.1 cm. thick hot pressed plywood ocp qlta pl14 18 4. dia 4mm zigzag spring assembly should be mounted in understructure for support and additional cushioning purpose leg assembly: it should be a welded assembly made in stainless steel (grade ss 202) tube & plate. featherlite sofa. feather lite make model s 900 3s ms brown 3 seater (converse model), 8. sofa: providing and supplying of sofas:width (w): 146.0 cm. depth (d): 92.0 cm. height (h): 82.0 cm. seat height (sh): 45.0 cm.seat foam: the seat should be made of pu foam with density 32 plus or minus 2 kg/cu.mtr having an additional top layer of j pu foam with density 28 plus or minus 2 kg/cu. seat should be upholstered with fabric or leatherette. 2) back foam: the back should be made of pu foam with density 28 plus or minus 2 kg/cu. mtr with two additional top layer of supersoft foam of density 23 plus or minus 2 kg/cu. mtr, upholstered with fabric or leatherette understructre : understructure should be made up of 1.2 plus or minus 0.1 cm. thick hot pressed plywood ocp qlta pl14 18 4. dia 4mm zigzag spring assembly should be mounted in understructure for support and additional cushioning purpose leg assembly: it should be a welded assembly made in stainless steel (grade ss 202) tube & plate... model featherlite sofa (white finish)). godrej/feather lite make model 238 1s ms 2s ms white color single seater white color.(pearl model), 9. sofa 1 seater brown color: width (w): 87.0 cm. depth (d): 82.0 cm. height (h): 82.0 cm. seat height (sh): 45.0 cm.seat foam: the seat should be made of pu foam with density 32 plus or minus 2 kg/cu.mtr having an additional top layer of j pu foam with density 28 plus or minus 2 kg/cu. seat should be upholstered with fabric or leatherette. 2) back foam: the back should be made of pu foam with density 28 plus or minus 2 kg/cu. mtr with two additional top layer of supersoft foam of density 23 plus or minus 2 kg/cu. mtr, upholstered with fabric or leatherette understructre : understructure should be made up of 1.2 plus or minus 0.1 cm. thick hot pressed plywood ocp qlta pl14 18 4. dia 4mm zigzag spring assembly should be mounted in understructure for support and additional cushioning purpose leg assembly: it should be a welded assembly made in stainless steel (grade ss 202) tube & plate..pisa godrej/interact featherlite sofa(wood finish)).godrej/ featherlite make model s 900 1s ms 1 seater brown color(converse model), 10. sofa 2 seater brown color: width (w): 87.0 cm. depth (d): 82.0 cm. height (h): 82.0 cm. seat height (sh): 45.0 cm.seat foam: the seat should be made of pu foam with density 32 plus or minus 2 kg/cu.mtr having an additional top layer of j pu foam with density 28 plus or minus 2 kg/cu. seat should be upholstered with fabric or leatherette. 2) back foam: the back should be made of pu foam with density 28 plus or minus 2 kg/cu. mtr with two additional top layer of supersoft foam of density 23 plus or minus 2 kg/cu. mtr, upholstered with fabric or leatherette understructre : understructure should be made up of 1.2 plus or minus 0.1 cm. thick hot pressed plywood ocp qlta pl14 18 4. dia 4mm zigzag spring assembly should be mounted in understructure for support and additional cushioning purpose leg assembly: it should be a welded assembly made in stainless steel (grade ss 202) tube & plate..featherlite sofa(brown color).featherlite make model s 900 2s ms 2seater brown color(converse model), 11. centre table:width of table= 120.0 cm, depth=77.0 cm, height=33 cm. should be a center table glass : it should be 12 plus or minus 0.3 mm thick black tinted toughened glass uv glued with bushes made in ss 202 grade for fixing with understructure. pshould be a center table understructure : centre table should be1200wx770dx330h. model: featherlite make evan centre table, 12. chair: the seat is made up of 1.4 plus or minus 0.1 chick hot press 4 plywood upholstered with fabric and moulded polyurethane foam. it has a seat depth adjustment of 5.0 plus or minus 0.3 cm integrated in the seat through a sliding mechanism. seat size: 50.0cm (w)x 49.0cm(d).the back is injection moulded in glass filled polyamide which is upholstered with mesh fabric. the back consist of adjustable lumbar support made of injection moulded polypropylene having an adjustment of 6.0 plus or minus 0.1cm.backsize: 50.0cm(w) x68.0 cm(h). the mechanism is designed with the following features:• 360 degree revolving type.• centre tilt synchro• 3 position (including upright lock) giving option of variable tilt angle to the chair with anti shock feature. make: featherlite model item 0000542 oc 1 optima high back mesh chair with head rest, ...

Karnataka Pollution Control Board - Karnataka

23138272 providing chair to ngt office,chairman chamber, chairman anti chamber and chairman meeting table at 2nd floor, parisara bhavan, church street, banglaore. 1. chair: the seat is made up of 1.4plus or minus 0.1 chick hot press 4 plywood upholstered with fabric and moulded polyurethane foam. it has a seat depth adjustment of 5.0plus or minus 0.3 cm integrated in the seat through a sliding mechanism. seat size: 50.0cm (w)x 49.0cm(d).the back is injection moulded in glass filled polyamide which is upholstered with mesh fabric. the back consist of adjustable lumbar support made of injection moulded polypropylene having an adjustment of 6.0plus or minus 0.1cm.backsize: 50.0cm(w) x68.0 cm(h).the polyurethane foam for seat is of density 55plus or minus 5kg/m3.the height adjustment armrest is made of polyamide struture and polypropylene housing with moulded pu armtop having a adjusted of 7.0+ 0.3 cm the inner tube of armrest is chrome plated. chair: the mechanism is designed with the following features: 360 degree revolving type. centre tilt synchro 3 position (including upright lock) giving option of variable tilt angle to the chair with anti shock feature. the headrest is injection moulded din glass filled polypropylene which is upholstered with foam and fabric has an adjustment of 6.0plus or minus 0.1cm & its assembled over the full back chair. aluminium base with the pneumatic height adjustment has an adjustment stroke of 8.5+ plus or minus 0.3cm.the pedestal is injection moulded polymide and fifted with 5 nos. twin wheel castors. the pedestal is 66.0+ 0.1cm wheel diameter. the twin wheel castors are injection moulded in black glass filled polyamide having 6.0plus or minus 0.1cm wheel diameter. the powder coated frame is made of dia2.8plus or minus 0.03cm x0.2plus or minus 0.02 cm the m.s. round tube. the frame is fitted with plastic caps made of injection moulded glass filled polypropylene. 76(w)* 76(d)* 100 109(h)* 45 54(sh). make: godrej/featherlite, 2. chair:the chair seat/back assembly: the seat should be made up of 1.2plus or minus 0.1cm thk. hot pressed plywood ocp qlta pl14 18.the back should be made up of injection moulded glass filled nylon & upholstered using net fabric with high tenacity yarn.seat size: 47.0 cm. (w) x 51.5 cm. (d) back size :45.0 cm. (w) x 65.3 cm. (h)high resilience (hr) polyurethane foam: the hr polyurethane foam should be moulded with density =55+/ 2 kg/m qube and hardness 16 plus or minus 2 kgf for 25% compression. armrests : the armrests have an up down adjustment of 8.5 plus or minus 0.5cm which should be provided in armrest structure. armrest top has an integrated layer of thermoplastic elastomer (tpe). lumbar support assembly: the lumbar support consshould be ts of polypropylene pad with moulded polyurethane foam & covered with polyester fabric. the height of lumbar pad can be adjusted through two projecting knobs provided on the rear side of the pad. lumbar pad has an adjustment of 8.0 plus or minus 0.5 cm in height. front pivot synchro mechanism: the adjustable tilting mechanism should be designed with the following features. 360 degree revolving type. single point control. front pivot for tilt with feet resting on ground ensuring more comfort. tilt tension adjustment. 4 position locking with anti shock feature. seat/back tilting ratio of 1:2.pneumatic height adjustment: the pneumatic height adjustment has an adjustment stroke of 10.0plus or minus 0.3 cm.pedestal assembly: the pedestal should be injection moulded in black 30% glass filled nylon and fitted with 5 nos. twin wheel castors. the pedestal pitch center dia should be om 66.1plus or minus 0.5 cm (76.1 plus or minus 1.0 cm. with castors).twin wheel castors: the twin wheel castors should be injection moulded in black nylon. the neckrest assembly consshould be t of polypropylene pad with moulded polyurethane foam & covered with polyester fabric. neckrest should be fixed to back assembly through neckrest connector. neckrest assembly has height adjustment of 4.2plus or minus 0.5 cm and rotation adjustment of overall 76 degree plus or minus 2 degree. the complete neckrest assembly should be retro fit to the main chair . model: godrej/featherlite ys 0816l with aluminium base medium back, 3. pisa centre table:width of table= 112.0 cm, depth=60.0 cm, height=35.1 cm.pshould be a center table glass : it should be 12 plus or minus 0.3 mm thick black tinted toughened glass uv glued with bushes made in ss 202 grade for fixing with understructure. pshould be a center table understructure : it should be a welded assembly made in ss202 grade having dia. 12plus or minus 0.04 as per should be :1762. model: pisa godrj/featherlite, 4. providing and supplying of sofa: width (w): 86.0 cm. depth (d): 92.0 cm. height (h): 82.0 cm. seat height (sh): 45.0 cm.seat foam: the seat should be made of pu foam with density 32 plus or minus 2 kg/cu.mtr having an additional top layer of j pu foam with density 28 2 kg/cu. seat should be upholstered with fabric or leatherette. 2) back foam: the back should be made of pu foam with density 28 plus or minus 2 kg/cu. mtr with two additional top layer of supersoft foam of density 23plus or minus 2 kg/cu. mtr, upholstered with fabric or leatherette understructre : understructure should be made up of 1.2plus or minus 0.1 cm. thick hot pressed plywood ocp qlta pl14 18 4. dia 4mm zigzag spring assembly should be mounted in understructure for support and additional cushioning purpose leg assembly: it should be a welded assembly made in stainless steel (grade ss 202) tube & plate..pisa godrej/interact featherlite sofa(wood finish)).godrej/ feather lite make 1 seater, 5. providing and supplying of tycon leatherlite (cs 6031ce)medium back (mb) chairs. supply of leatherlite chairs:the seat and back to be made up of upholstered with leatherlite and polyuthene foam together with moulded abs seat and back covers. tilting bolt made from pressure die cast of lm 6 aluminium/steel alloy and ms plate. tilt can be adjusted by tightening spring tension manually. self skinned pu arm with parting lines on side of the arm. this does not hurt the elbows and arms are scratch free ,suspa gas lift for height adjustment mechanism, spring loaded gas lift for adjusting the height of seat.godrj/featherlite make,model.no.hf 366 1 medium back brown colour tycon model leatherlite, 6. sofa: providing and supplying of sofas: width (w): 205.5 cm. depth (d): 92.0 cm. height (h): 82.0 cm. seat height (sh): 45.0 cm.seat foam: the seat should be made of pu foam with density 32 plus or minus 2 kg/cu.mtr having an additional top layer of j pu foam with density 28 plus or minus 2 kg/cu. seat should be upholstered with fabric or leatherette. 2) back foam: the back should be made of pu foam with density 28 � 2 kg/cu. mtr with two additional top layer of supersoft foam of density 23plus or minus 2 kg/cu. mtr, upholstered with fabric or leatherette understructre : understructure should be made up of 1.2plus or minus 0.1 cm. thick hot pressed plywood ocp qlta pl14 18 4. dia 4mm zigzag spring assembly should be mounted in understructure for support and additional cushioning purpose leg assembly: it should be a welded assembly made in stainless steel (grade ss 202) tube & plate. made of pu foam with density 28plus or minus 2 kg/cu. mtr with two additional top layer of supersoft foam of density 23plus or minus 2 kg/cu. mtr, upholstered with fabric or leatherette understructre : understructure should be made up of 1.2plus or minus 0.1 cm. thick hot pressed plywood ocp qlta pl14 18 4. dia 4mm zigzag spring assembly should be mounted in understructure for support and additional cushioning purpose leg assembly: it should be a welded assembly made in stainless steel (grade ss 202) tube & plate. gogrej pisa model/interact featherlite sofa(wood finish)). godrej/feather lite make 3 seater, 7. sofa: providing and supplying of sofas:width (w): 146.0 cm. depth (d): 92.0 cm. height (h): 82.0 cm. seat height (sh): 45.0 cm.seat foam: the seat should be made of pu foam with density 32plus or minus 2 kg/cu.mtr having an additional top layer of j pu foam with density 28plus or minus 2 kg/cu. seat should be upholstered with fabric or leatherette. 2) back foam: the back should be made of pu foam with density 28 plus or minus 2 kg/cu. mtr with two additional top layer of supersoft foam of density 23plus or minus 2 kg/cu. mtr, upholstered with fabric or leatherette understructre : understructure should be made up of 1.2plus or minus 0.1 cm. thick hot pressed plywood ocp qlta pl14 18 4. dia 4mm zigzag spring assembly should be mounted in understructure for support and additional cushioning purpose leg assembly: it should be a welded assembly made in stainless steel (grade ss 202) tube & plate... model pisa godrj/ interact featherlite sofa(wood finish)). godrej/feather lite make 2 seater, 8. supply of leather chairs:the seat and back to be made up of upholstered with pure leather and polyuthene foam together with moulded abs seat and back covers. tilting bolt made from pressure die cast of lm 6 aluminium alloy and ms plate. tilt can be adjusted by tightening spring tension manually. self skinned pu arm with parting lines on side of the arm. this does not hurt the elbows and arms are scratch free ,suspa gas lift for height adjustment mechanism, spring loaded gas lift for adjusting the height of sea( model tycon/equvalant). godrej/featherlitr make and model.no.cs 6031e tycon brown colour with pure leather, ...

Visvesvaraya Technological University - Karnataka

8872081 tender for procurement of research equipments to department of structural engineering, vtu pg centre, mysuru 1 computer controlled electronic universal testing machine ( utm ) : specifications: a ) capacity: 50kn ( 05 tonnes ) . b ) operation: electrically operated type. c ) desktop computer of 2gb ram, 500 gb hdd, i3 processor, tft monitor, mechanical keyboard, optical mouse, 3 usb ports, dvd writer d ) software to display real time stress strain curve and load verses displacement curve and to develop real time stress strain data and load verses displacement data. e ) testing speed: 3 mm per minute ( digital display ) f ) all the interfacing accessories between computer and utm g ) all the mechanical adjustment accessories h ) testing fixtures: i. tensile testing fixtures for flat specimens ii. adjustable span 3 point loading, flexure testing fixtures for flat specimens iii. compression testing fixtures for cylindrical specimens 2 manually operated digital hot press. specifications: a ) platform size: flat 18” x 18 “, with a hole to insert temperature sensors through temperature controller. b ) temperature controller: electrically operated, digital display type. c ) temperature range : 50º celsius to 120º celsius. d ) pressure gauge: manually operated, analog display type, hydraulic jack operated. e ) pressure range: 5 bar to 35 bar...

Iti Ltd - Karnataka

6335430 procurement of capital items vacuum lamination hot press with independent cold press, high speed cnc micro drilling machine, flying provide tester, collimated uv light exposure system....

Iti Ltd - Karnataka

6332471 procurement of capital items towards manufacturing of multi layers pcb. vacuum lamination hot press with independent cold press, high speed cnc micro drilling machine, flying probe tester, collimated uv light exposure system...

Iti Ltd - Karnataka

6331037 procurement of capital itmes towards manufacturing of multilayers pcb(1) vaccum lamination hot press with independent cold press, 2) high speed cnc micro drilling machine, 3) flying probe tester, 4) collimated uv light exposure system)...

Institute Of Wood Science And Technology - Karnataka

5370218 supply of real time pcr, finger jointing machine, briquetting machine with crusher and shredder machine, hydraulic hot press, dynamic mechanical analyzer and gas chromatograph mass spectrophotometer ...