South Western Railway - Karnataka

33858718 supply of type d, 2 watt 90 140 / 170v ac / dc led lamp fitting with suitable driver and ip protection as per iec 60529 for retro fitment in existing bayonet cap type holder in place of 15 / 25 w incandescent lamp in ac & tl coaches as per icf specification no. icf / elect / 960 dated 04.12.2017 ( rev.00 ) . spec:type d, 2 watt 90 140 / 170v ac / dc led lamp fitting with suitable driver and ip protection as per iec 60529 for retro fitment in existing bayonet cap type holder in place of 15 / 25 w incandescent lamp in ac & tl coaches as per icf specification no. icf / elect / 960 dated 04.12.2017 ( rev.00 ) . spec:, 2 watt ( max ) led screw type retro fitment lamp, type d confirming to icf specification no. icf / elec / 960 ( rev.0 ) with correction slip no. cs 01, cs 02 & cs 03....

South Western Railway - Karnataka

33858636 supply of type d, 2 watt 90 140 / 170v ac / dc led lamp fitting with suitable driver and ip protection as per iec 60529 for retro fitment in existing bayonet cap type holder in place of 15 / 25 w incandescent lamp in ac & tl coaches as per icf specification no. icf / elect / 960 dated 04.12.2017 ( rev.00 ) . spec:type d, 2 watt 90 140 / 170v ac / dc led lamp fitting with suitable driver and ip protection as per iec 60529 for retro fitment in existing bayonet cap type holder in place of 15 / 25 w incandescent lamp in ac & tl coaches as per icf specification no. icf / elect / 960 dated 04.12.2017 ( rev.00 ) . spec:, 2 watt ( max ) led screw type retro fitment lamp, type d confirming to icf specification no. icf / elec / 960 ( rev.0 ) with correction slip no. cs 01, cs 02 & cs 03....

Mysore Palace Board - Karnataka

33125313 supply of 15 watts 250 volts grade brass cap incandescent lamps suitable for ferry land base screw type holders to mysore palace, mysore...

Karnataka Power Corporation Limited - Karnataka

32834080 supply of led, hpsv, metal halide lamps and led, fluorescent tube lights and lighting fittings (fixtures) etc., on rate contract (rc) basis for a period of two (2) years for kpcl projects. (extendable for further period of one more year based on the performance of previous years). supply of led, hpsv, metal halide lamps and led, fluorescent tube lights and lighting fittings (fixtures) etc., on rate contract (rc) basis for a period of two (2) years for kpcl projects. (extendable for further period of one more year based on the performance of previous years). , 3w led bulb e27,5 w 1 led batten fitting,5w led bulb e14,5w led lamp threaded type,5 w led post top lantern fitting,5 w panel light batten fitting,6 w panel light led,6w led panel light round fitting,7w led ceiling light fitting,8w sle dlr 6k stellar square fitting,9w led bulb 2 pin,9 w led lamp threaded type,10 w led bulb b22,12 w led bulb 24v ac/dc e27,10 w 2 led batten fitting,12 w led bulb b22,12 w led decorative dam light fitting,11 w / 15 w fitting under water light,12 w square led fitting,15 w led lights,15w led tube fitting with external driv,15 w led squre down light fixture,15 w led bilk head fitting,2x18w watts led batten tubelight fitting,18w led square fixture,18 w square led lamp fixture,18w led tube light fitting,18w led panel lights fixture,18w led bulkhead light fitting,18w led dc light with battery,18w led hl lamp fitting,20w led batten light 2 fitting,20w,e27 led lamp,20 w led batten light,20 w retrofit led tube light,22 w led batten tubelight fitting,2x20 w led tl fittings,22 w led t5 batten fitting,22 watts led square fitting,22 w led tube 4feet,24 watts led street light fitting,24w led panel light square fixture,25w led street light fitting,27 w led well glass fitting,30 w led street light outdoor,30w led well glass fitting,30 w led bulb,36 w led tube light batten fitting,36w led recessed fixture 2x2,39 watts led tube light fitting,,40 w led bulb,240w led flood light fitting,40w led bay light fitting,40w led indstl tubelight fitin,40w well glass led fitting,40 w led street light,40 w led low bay industrial light,40 w led well glass fitting,42w led panel luminary,45watts led panel,50w led flood light fitting,50 w led bulb,50w led sreet light fitting,60w led well glass led fitting,60w led bay light fitting,60watts led sreet light fitting,60w led flameproof wellglass,70watts led sreet light fitting,70 watts led panel fitting,70w well glass fixture,70w hpsv bulk head fitting,80w led high bay light,80w led street light,90w led street light fiting,90w led bay light fitting,90w led flameproof wellglass,100 w led flood light,100w led high bay al reflector,120w flood light fittings,screw,120 w led midbay fitting,120w led street light fitting,150w street light led,150 w led high bay light,150w led antiglare led light fitting,180w led high bay light,200 w led flood lights,200w led high bay al reflector,150w led flood light(discrete),250 w led flood light,250w led bay light fitting,9 w solar light fitting,11w solar street light fitting,neon aviation fittings 75va,8 w /12 w led down lighter of dia 104mm,12 w /15 w led down lighter of dia 180mm,rechargeable led torch,long range led flash light,led rechargeable torch,led search light,hand lamp set complete with,led hand lamp 230v,led hand lamp 24v ac,hand lamp,hand lamp kit,rechargeable led hand lamp,inspection lamp set 23 24v,1000w,250v hpmv lamp, 50coils,400 w hpsv lamp,400 w metal helide lamp,1x400w hpmh flood light,400watts bjhbi hpsv assembly,400w fitting hpmv (bjef 21s),400 w hpmv lamp screw type,250w sont lamps tubler( hpsv),250 w hpsv street light fitting,250w hpsv fitting midbay,150 w hpsv lamps screw type,150w hpsv highbay fitting,150 w integral well glass luminaires,70 w hpsv street light fittings,150 w hpsv fitting w/o lamp,125 w hpmv lamps,125 w integral well glass luminaires,250 w mercury vapour lamps,150w metal hallide lamps,150w hpmv lamp screw type,80 w hpmv lamp screw type,160 w hpmv lamps,70w hpsv lamp,70 w integral well glass,250 w metal halide fitting,250w metal halide lamps (es),150 w metal helide tubular,150 watts tubular lamps hpsv,150w sont laps es 240volts,150w hpmh street light fitting,70 w metal halide fitting,70 w metal halide lamps sont,70 w metal hellide lamp (es),40/36 w flurescent tube,40/36 w fl fitting 4 feet,2x28w 4 fl. fitting,40 w/36 w alu streee light fitting,2x40w tl fitting,1x40w/36 w box type fl fitt 1200mm,40w/36 w fluroscent fittings,14 w t5 light,58w 5ft tubes,20 w fluorescent tube 2ft,36 w fluorescent tube 1200mm,2x36w tl fitting indoor,4x14 w lighting fixture,28 w t5 tube,20 watts ,flouroscent tubes,15 w 1.5 feet tube light,14w tube light 360 mm,11 w cfl,11w mirror light fitting,14 w compact flourecent lamps,35 w bulk head luminaries,13 w cfl lamps,14 w cfl lamps,23 w cfl,36 w cfl,35 w cfl,40 w/36 w cfl street light fitting,11*2 w cfl fittings,18 w cfl lamp four pin,36 w cfl lighting fixtures,85 w cfl non retro fit type,20 w hand lamp cfl.,15w cfl lamps,20/26 watts cfl lamps [es],20w cfl 230v,18w cfl pin type,18 w cfl,15w cfl with fitting.,28w cfl t5 lamps,36w cfl lamps,3x36w cfl fixture,11 w panel light cfl,1000 w halogen lamp,1000w pin type halogen lamp,1000 w halogin lamp fitting,500 w halogen lamp,500 w flood ligt fit halogen,halogen lamp and fitting 200w,200 w / 500 w flood light fitting,500 w clear lamp screw type 23,100 w incandescent bulb,200 watt es clear lamps,200 w incandescent lamp sc lamp,60 w bulb,300w, incandescent lamp,100 watts gls lamps,100 w gls screw type bulb,300 watts gls lamps,40 w clear lamp screw 230,40w bulb pin type,500 w gls incandescent lamps...

Public Works Department - Karnataka

32151749 the quotation called for rates to estimate prepare for lab equipments & machineries to government engineering college ramanagra. 1 spring constant setup setup includes  metal stand with 50cm scale fitted.  soft springs 2nos.  slotted weights of 5 pieces ( 50gm each ) 2 set. 2 stefan’s law setup includes  0 6v regulated power supply.  filament bulb 6v.  digital voltmeter and ammeter. 3 photo diode setup setup includes  variable voltage sources ( 0 5 v and 0 15v ) .  photodiode and bulb holding setup.  2mm / 3mm patch cards. 4 numerical aperture of an optical fiber setup setup includes  laser source, 560nm, 5 mw.  optical fiber cable, 1.5m length.  movable fiber holding stand with scale fitted and screen. 5 di electric constant – expt setup setup includes  a setup within built voltage source, 0 30 v digital voltmeter, digital stop clock, resistor, 3 capacitors with different capacitance value.  2 mm patch cords. 6 magnetic field intensity along the axis of a coil setup includes  circular coil setup of 6” dia with a bridge along the axis of the coil fitted with scale.  deflection magnetometer 4”, commutator.  dc ammeter ( 0 5a ) , dc voltage source connecting wires. 7 forced oscillation study setup includes  a modified pohl’s pendulum ( torsion pendulum, ) setup  variable speed motor setup for forced oscillations.  digital frequency meter.  suitable power sources with connecting wires. 8 resistivity by four probe setup includes  a four probe setup with oven ( 1500c ) .  digital or analog thermometer.  semiconductor and conductor samples ( each one ) suitable power sources with connecting wires. 1 c programming laboratory computers ( wi fi enabled ) computers:7thgeneration corei5 / i7, 8gb ram, 1tb hdd, 2gb graphics, 23.8 fhd windows 10 all in one desktop pc with wi fi enabled each / no 1 2 server computer ibm intel xeon e52680, 16core, lga 2011 socket, 64 gb ram, ddr3, 384gb, 600gb each / no 1 3 hp laserjet configuration black and white, print, copy, scan , 1 hi speed usb 2.0 , laser, a4 black and white laser, multifunction printer, perfect for enterprise, print, copy and scan, print speed up to 21 ppm ( black ) preinstalled introductory hp laserjet black cartridge ( ~700 pages ) installation guide, getting started guide, users guide, support flyer, warranty guide printer software and documentation on cd power cord , usb cable each / no 1 4 ups and batteries 10 kva – ups10 kva ups • type: online single phase input & single phase output • capacity : 10kva • backup time: 4 hours or higher • input frequency: 50hz.+ / 5% • input voltage : 160v 270v • output voltage:230v+ / 1%v • output frequency : 50hz+ / 0.2hz. • input power factor: >0.9 • output power factor: 0.8 lag to unity • pf waveform: pure sine wave • alarm: on battery, low battery, ups over load • no. of batteries: compatible • dc voltage ( input ) :compatible • overload capacity : 150% for 1minute , 125% for 10minutes • inverter efficiency : 90% • overall efficiency: 90% • crest factor: 3:01 • regulation: + / 1% • switching frequency : above 20khz • technology: igbt based pwm technology with isolation transformer • warranty : 3 years onsite comprehensive including batteries • protection: automatic discharge protection with self test features, overload surge protection , input fault, cold start, low battery , battery over charge, output short circuit, charging current circuit, inverter over temperature • lcd display : output voltage, output current, load%, output frequency, input voltage, battery voltage • load test: at 100% load on resistive load thd: <3% for linear, <5% for non linear • certification: iso 9001:2008 or higher, etdc / cpri test report &bis certification each / no 1 5 batteries rack capacity of 20 to 25 batteries each / no 1 6 network printer hp jet 4240n network ready laser printer printing technology laser, inkjet brand hewlett packard connectivity technology usb printer output monochrome print media paper ( plain ) duplex no hardware interface usb 2.0 max printspeed monochrome 40 ppm item weight 60 pounds see less about this item up to 40 ppm letter print speed 1200 dpi resolution 460 mhz processor / 64 mb ram memory up to 512 mb ram via two industry standard 100 pin ddr dimm slots 58.00 lbs ( wxlxh ) 23.60 x 19.70 x 21.30 each / no 1 7 networking for 20 nodes cat6 utp cable ( box of 305 mtrs ) , 24 port ethernet networking switch – sr224 cisco, i / o with smb, jack panel – 24 ports cat6 patch cable ( 3 mts ) , rj 45 connectors, 1” flexible pipe per runnining mtr, 2” flexible pipe per running mts, networking rack each / no 1 8 air conditioners for labs blue star 2.0 ton 5 star inverter split ac ( copper, dust filter, 2022 model, ia524dlu, white ) each / no 1 9 projector mativeresolution:xga 1024 x 768 brightness:3700 lumes lamp life: upto 10, 000hrs contrast ratio:16, 000:1 video compataibility:ntsc, pal hdmi:720p, 576p, 576i, 480p, 480i, 1080i, 1080p audio:audio out connector support with 16w audio output zoom focus:manual display input:vgax2 , hdmi x 2 , usb, composit av , mhl, wifi aspect ratio:4:3 and 16:9 remote :full function connectivity hdmi / vga, mhl, wifi each / no 1 10 analog and digital electronics lab / microcontroller lab arm / 7tdmi / lpc2148 kit including all interface and accessoreies each / no 1 11 patch cords each / no 1 12 cro probes each / no 1 13 pcb spring board each / no 1 14 ics: 555 ua741, 7400, 7402, 7404, 74138, 74151 7490, 7495, 7486, 7410, 7420, 7408, 7432, 7410, 7490, 7476 each / no 1 15 resistors: 100k, 10 k, 1k, 270 ω, 22k, 4.7 k, 15k, 7 k, 5k, 33 k, 6.8 k, 3.3 k, 2.2 k, 90 k, 470 ω, 8.2 k, 47 k, 1.8 k, 10 k , potentiometer 90k, 20k each / no 1 16 capacitor:1 uf, 0.47 uf, 0.01 uf, 0.1 uf, dc supply: +5 volts 1a, ±12 volts 500 ma socket: 5 nos 16 / 20 pin zif socket bread board: 1 nos 680 tie points logic i / p: 16 nos toggle switches for inputs logic o / p: 16 nos high bright leds for outputs ttl clock: 1hz, 10hz, 100hz, 1 khz, 10 khz display: 2 nos 7segment display mono pulse: 1 hi & 1 low pulse terminals: 4mm bt 15 terminals each / no 1 17 ups and batteries 10 kva – ups10 kva ups • type: online single phase input & single phase output • capacity : 10kva • backup time: 4 hours or higher • input frequency: 50hz.+ / 5% • input voltage : 160v 270v • output voltage:230v+ / 1%v • output frequency : 50hz+ / 0.2hz. • input power factor: >0.9 • output power factor: 0.8 lag to unity • pf waveform: pure sine wave • alarm: on battery, low battery, ups over load • no. of batteries: compatible • dc voltage ( input ) :compatible • overload capacity : 150% for 1minute , 125% for 10minutes • inverter efficiency : 90% • overall efficiency: 90% • crest factor: 3:01 • regulation: + / 1% • switching frequency : above 20khz • technology: igbt based pwm technology with isolation transformer • warranty : 3 years onsite comprehensive including batteries • protection: automatic discharge protection with self test features, overload surge protection , input fault, cold start, low battery , battery over charge, output short circuit, charging current circuit, inverter over temperature • lcd display : output voltage, output current, load%, output frequency, input voltage, battery voltage • load test: at 100% load on resistive load thd: <3% for linear, <5% for non linear • certification: iso 9001:2008 or higher, etdc / cpri test report &bis certification each / no 1 18 150 kvh batteries exide make 12v 150 / 200 ah smf batteries each / no 1 19 computer lab projector mativeresolution:xga 1024 x 768 brightness:3700 lumes lamp life: upto 10, 000hrs contrast ratio:16, 000:1 video compataibility:ntsc, pal hdmi:720p, 576p, 576i, 480p, 480i, 1080i, 1080p audio:audio out connector support with 16w audio output zoom focus:manual display input:vgax2 , hdmi x 2 , usb, composit av , mhl, wifi aspect ratio:4:3 and 16:9 remote :full function connectivity hdmi / vga, mhl, wifi each / no 1 20 staff hp laserjet configuration black and white, print, copy, scan , 1 hi speed usb 2.0 , laser, a4 black and white laser, multifunction printer, perfect for enterprise, print, copy and scan, print speed up to 21 ppm ( black ) preinstalled introductory hp laserjet black cartridge ( ~700 pages ) installation guide, getting started guide, users guide, support flyer, warranty guide printer software and documentation on cd power cord , usb cable each / no 1 21 department and staff laptop omputers:7thgeneration corei5 / i7, 8gb ram, 1tb hdd, 2gb graphics, 23.8 fhd windows 10 all in one desktop pc with wi fi enabled each / no 1 22 c programming laboratory computers ( wi fi enabled ) computers:7thgeneration corei5 / i7, 8gb ram, 1tb hdd, 2gb graphics, 23.8 fhd windows 10 all in one desktop pc with wi fi enabled each / no 1 23 computer network laboratory / mobile application developmen / artificial intelligence and machine learning laboratory server computer higher end specifications each / no 1 24 hp laserjet configuration black and white, print, copy, scan , 1 hi speed usb 2.0 , laser, a4 black and white laser, multifunction printer, perfect for enterprise, print, copy and scan, print speed up to 21 ppm ( black ) preinstalled introductory hp laserjet black cartridge ( ~700 pages ) installation guide, getting started guide, users guide, support flyer, warranty guide printer software and documentation on cd power cord , usb cable each / no 1 25 ups and batteries 10 kva – ups10 kva ups • type: online single phase input & single phase output • capacity : 10kva • backup time: 4 hours or higher • input frequency: 50hz.+ / 5% • input voltage : 160v 270v • output voltage:230v+ / 1%v • output frequency : 50hz+ / 0.2hz. • input power factor: >0.9 • output power factor: 0.8 lag to unity • pf waveform: pure sine wave • alarm: on battery, low battery, ups over load • no. of batteries: compatible • dc voltage ( input ) :compatible • overload capacity : 150% for 1minute , 125% for 10minutes • inverter efficiency : 90% • overall efficiency: 90% • crest factor: 3:01 • regulation: + / 1% • switching frequency : above 20khz • technology: igbt based pwm technology with isolation transformer • warranty : 3 years onsite comprehensive including batteries • protection: automatic discharge protection with self test features, overload surge protection , input fault, cold start, low battery , battery over charge, output short circuit, charging current circuit, inverter over temperature • lcd display : output voltage, output current, load%, output frequency, input voltage, battery voltage • load test: at 100% load on resistive load thd: <3% for linear, <5% for non linear • certification: iso 9001:2008 or higher, etdc / cpri test report &bis certification each / no 1 26 batteries rack 25 batteries each / no 1 27 network printer hp jet 4240n network ready laser printer printing technology laser, inkjet brand hewlett packard connectivity technology usb printer output monochrome print media paper ( plain ) duplex no hardware interface usb 2.0 max printspeed monochrome 40 ppm item weight 60 pounds see less about this item up to 40 ppm letter print speed 1200 dpi resolution 460 mhz processor / 64 mb ram memory up to 512 mb ram via two industry standard 100 pin ddr dimm slots 58.00 lbs ( wxlxh ) 23.60 x 19.70 x 21.30 each / no 1 28 networking for 20 nodes cat6 utp cable ( box of 305 mtrs ) , 24 port ethernet networking switch – sr224 cisco, i / o with smb, jack panel – 24 ports cat6 patch cable ( 3 mts ) , rj 45 connectors, 1” flexible pipe per runnining mtr, 2” flexible pipe per running mts, networking rack each / no 1 29 air conditioners for labs blue star 2.0 ton 5 star inverter split ac ( copper, dust filter, 2022 model, ia524dlu, white ) each / no 1 30 projector mativeresolution:xga 1024 x 768 brightness:3700 lumes lamp life: upto 10, 000hrs contrast ratio:16, 000:1 video compataibility:ntsc, pal hdmi:720p, 576p, 576i, 480p, 480i, 1080i, 1080p audio:audio out connector support with 16w audio output zoom focus:manual display input:vgax2 , hdmi x 2 , usb, composit av , mhl, wifi aspect ratio:4:3 and 16:9 remote :full function connectivity hdmi / vga, mhl, wifi each / no 1 3 e&c engineering department 1 regulated power supply 1. ar ps 302s dc regulated power supply with short circuit & overload protection 0 30 / 2a single out put with two digital meters. 2. ar ps 302d dc regulated power supply with short circuit & over load protection 0 30v / 2a dual output with two digital meters 2 bread board bread board with terminals mounted on plate 3 spring board spring board with two 16 pin zif socketand 64 spcar springs. 4 decade boxes plastic switches 1. decade resistance box with 6 dials ( 1 ohms to 1 m ohms ) 2. decade capacitance box with 6 dials ( 10pfd to 100pfd, 100pfd to 0.001ufd, 0.001ufd to 0.01ufd to 0.1ufd, .1ufd to 1ufd, 1ufd to 10ufd ) 3. decade inductance box with 6 dials ( 10uh to 100uh, 100uh to 1mh, 1mh to 10mh, 10mh to100mh, 100h to 1h, 1h to 10h ) 5 lcr meters handheld lcr meter 6 signal enerator generator phy 103far 0.2hz to 2mhz microcontroller based signal generator with lcd display for frequency & amplitude read out int / ext ( ext upto 3mhz counter ) sine / square / triangle and puse with variable duty cycle amplitude 2mv 20vpp with 40db attenuation. 7 digital storage oscilloscope 100 mhz dso model :gds 1102 u ( 1 gs / s, 2 mega points mem 8 desk top digital meters 1. ac voltmeter single range 2. dc voltmeter single range 3. ac ammeter single range 4. dc ammeter single range 9 analog oscilloscope scientific 30mhz dual trace oscilloscope 10 scr kit a ) variable dc power supply 3v to 30v @ 500ma to vary vak b ) variable dc power supply 1.5v to 15v @ 100ma to vary ig c ) 10watts fixed resistor rg for gate current d ) 50watts variable resistance for load current variation e ) 2 scr’s of different ratings to find different holding and latching current f ) digital dc milliammeter for gate current ig g ) digital dc ammeter for load current il. h ) digital dc voltmeter for vak i ) 230v ac mains operated j ) unit enclosed in a powder coated ms box with screen printed polycarbonate panel 11 scr controlled hwr and fwr using rc triggering circuit kit a ) 20v @ 0.5a ac supply b ) 10a / 600v scr with heat sink and snubber circuit c ) potentiometer, fixed resistor, capacitor and associated components to build r and r c triggering circuit d ) single phase diode bridge rectifier for full wave controlled rectifier e ) 25 watts resistive load f ) 230v ac mains operated g ) unit enclosed in a powder coated ms box with screen printed polycarbonate panel. 12 measurement of resistance using wheatstone and kelvin’s bridge kit wheatstone bridge: a ) dc power supply – 5v@1a b ) mr 100 sensitive galvanometer c ) the series arm consists of 10x1, 10x10, 10x100, 10x1000 ohms d ) the ratio arm consists of rotary switch of 7 multiplying factors of 0.001, 0.01, 0.1, 1, 10, 100 and 1000. e ) 230v ac mains operated kelvins double bridge: a ) dc power supply 5v@2a b ) mr 100 sensitive galvanometer c ) the double ratio arm consists of rotary switch of 5 multiplying factors of 0.01, 0.1, 1, 10 and 100 d ) 10 coils of 0.1 ohm resistors connected in a rotary switch in series with circular slide wire of 100 divisions to vary r e ) terminals are connect 4 terminal unknown resistor f ) 230v ac mains operated 13 characteristics of ldr & photo diode and turned on an led using ldr a ) variable dc power supply – 1.5v to 12v @ 250ma b ) digital dc voltmeter c ) digital dc milliammeter d ) ldr, photo diode, led, resistors and setup to vary the distance from ldr to lamp to vary light intensity on ldr e ) 230v ac mains operated 1 microcontroller kit 1 bread board bread board with terminals mounted on plate 2 spring board spring board with two 16 pin zif socketand 64 spcar springs. 3 microcontroller based signal generator phy 103far 0.2hz to 2mhz microcontroller based signal generator with lcd display for frequency & amplitude read out int / ext ( ext upto 3mhz counter ) sine / square / triangle and puse with variable duty cycle amplitude 2mv 20vpp with 40db attenuation 4 digital storage oscilloscope 100 mhz dso model :gds 1102 u ( 1 gs / s, 2 mega points mem ) 5 variable power supply ar ps 302d dc regulated power supply with short 6 linear ic tester minmax make microprocessor based analog & digital ic tester for testing analog ics upto 20 pins and digital ics upto 40 pins with 24 keys keyboard and 16 x 2 lcd alphanumeric display. model mme adit 40 7 lcr meters handheld lcr meter 8 decade boxes plastic switches 1.decade resistance box with 6 dials ( 1 ohms to 1 m ohms ) 2. decade capacitance box with 6 dials ( 10pfd to 100pfd, 100pfd to 0.001ufd, 0.001ufd to 0.01ufd to 0.1ufd, .1ufd to 1ufd, 1ufd to 10ufd ) 3. decade inductance box with 6 dials ( 10uh to 100uh, 100uh to 1mh, 1mh to 10mh, 10mh to100mh, 100h to 1h, 1h to 10h ) 9 digital multimeter meco make 10 linear ic trainers 16 pin zif sockets 2 nos. built in function generator 1hz to 100khz sine wave with variable amplitude & square wave. built in power supply ( +5v 1a, + / 15v 200ma, 0 to + / 15v 350ma, 24v, 200ma ) with metal box enclosure. variable input source 0 to + / 12v, 0 to + / 1.2v. 4mm sockets with patch cords. bread board ( 165 x 50mm ) 1no. potentiometers 3 nos. a / c source 6 0 6 regulators 7805, 7905, lm317 extra 20 terminals. 20 patch chords each / no 1 7 dsp lab 1 dsp starter kit tms320c6748 with emulator hardware the omap l138 c6000 dsp+arm processor is a low power applications processor based on an arm926ej s and a c674x dsp core. 456 mhz c6748 fixed / floating point dsp, on chip rtc, one mini usb serial port ( on board serial to usb ) , one fast ethernet port ( 10 / 100 mbps ) with status, leds, one usb host port ( usb 1.1 ) , one mini usb otg port ( usb 2.0 ) , one lcd port, two audio ports ( 1 line in & 1 line out ) , 14 pin jtag header, on board 128mb sdram and 128mb nand. software a complete integrated development environment ( ide ) , an efficient optimizing c / c++ compiler assembler, linker, debugger, an a advanced editor with code maestro™ technology for faster code creation, data visualization, a profiler and a flexible project manager dsp / bios™ real time kernel target error recovery software dsk diagnostic tool plug in ability for third party software for additional functionality. each / no 1 8 hdl lab 1 sda fpga 04 trainer sda fpga 04 trainer 32 inputs using 8 way four dip switches. each input of these switches has an led indication. 32 outputs through output ports of fpga connected to leds. 16x2 alpha–numeric lcd display with back light through 10 pin frc connectors to fpga / cpld port pins. six digit 7 segment displays connected through 10 pin frc connector to fpga / cpld port pin. 4x4 key matrix. 10 mhz, 5 mhz, 1mhz, 500 khz, 100 khz five different clock frequencies. on board relay connected using 10 pin frc to fpga / cpld port pins. on board traffic light simulator connected to fpga / cpld port pins using 16 pin frc. on board adc connected to fpga / cpld port pins using 16 pin frc. on board dac is provided to generate different waveforms and it is connected to fpga / cpld port pins using 16 pin frc. on board four level elevator connected to fpga / cpld port pins using 16 pin frc. two pin reliamate is provided on the board to connect external dc motor and it is connected to fpga / cpld port pins using 10 pin frc. 5 way powermate is provided to connect external stepper each / no 1 motor and it is connected to fpga / cpld port pins using 10 pin frc. 26 pin frc header with cable for connecting to als standard interfaces. 8 inputs using 0ne dip switches. each input of these switches has an led indication. one push button four sets of 20x2 female berg connector to plug the daughter board. programs can be downloaded from the pc to the fpga / cpld on the daughter board using programming tool. 2 daughter board 6 xlinix xc6slx4tq144: spartan6 fpga platform flash in system programmable configuration prom: xcf04svo20 16 pin frc connector to select between base board toggle switch and the 26 pin frc external interface. jtag connector ( 10 pin frc connector ) for boundary scan programming. push button switch to re initialize the fpga and done led for program status indication power from the bottom board. four sets of 20 x 2 berg connectors for plugging on to the base board. each / no 1 3 bit pattern logic analyzer cpld 32 bit pattern generator and logic analyzer 4 power supply power supply ( 5v, 1.5a, + / 12v, 100ma ) 1 arm cortex m3 1768 evaluation board 1 frequency modulation and demodulation trainer kit 2 amplitude modulation and demodulation trainer kit 3 analog sampling and reconstruction trainer kit 4 time division multiplexing and demultiplexing trainer kit ( tdm ) with power supply 5 psk / dpsk modulation and demodulation kit with power supply 6 ask / fsk modulation and demodulation kit with power supply  data bits: variable data using sliding switch  carrier :onboard variable frequency and amplitude sine wave  bask modulator: using cd4066 ( bilateral switch  ask demodulator: using ic tl084 with low pass filter  we can see outputs in various test points  bfsk modulator: variable carrier frequency modulation  bfsk demodulator: using pll method for demodulation also we can see outputs in various test points 7 measurement of frequency, guide wavelength, power , vswr and attenuation in microwave test bench klystron power supply  klystron mount with klystron tube  variable attenuator  frequency meter  slotted section  tunable probe  detector mount  isolator  waveguide stand ( 02 nos. )  bnc bnc cables ( 02 nos. )  cooling fan 8 obtain the radiation pattern and measurement of directivity and fain of micro strip dipole and yagi antenna ( 1set )  yagi antenna  dipole antenna  antenna tripod stands ( transmitter and receiver )  microwave detector ( dc 3ghz )  signal generator 2.0 – 3.0ghz  vswr meter  coaxial matched loads – 50 ohms 03 nos.  short  adapter n ( m ) to sma ( f )  adapter sma ( f ) to sma ( f )  adapter sma ( m ) to sma ( m )  rf cable 1m length bnc cable 9 determination of a ) coupling and isolation characteristics of microstrip directional coupler b ) resonance characteristics of microstrip ring resonator and computation of dielectric constant of the substrate c ) power division and isolation of microstrip power divider ( 1set )  ring resonator  power divider  branch line directional coupler  parallel coupled directional coupler  stripline directional coupler  microwave detector ( dc 3ghz )  signal generator 2.0 – 3.0ghz  vswr meter  coaxial matched loads – 50 ohms 03 nos.  short  attenuator pad 3db  attenuator pad 6db  attenuator pad 10db coaxial  adapter n ( m ) to sma ( f ) 02 nos.  adapter sma ( f ) to sma ( f ) 02 nos  adapter sma ( m ) to sma ( m )  bnc cable 10 matlab / labview software simulation experiments : nrz, rz, and generation of eye diagram for binary polar signaling. pcm and modulation and demodulation digital modulation schemes 1. dpsk transmitter and receiver 2. qpsk ( 10 users license ) 1 cadence / synopsis / mentor graohics / microwind software eda tools required to carry out verilog programs and layout for vlsi circuits. ( 10 users license ) 1 network simultion software qualnet 10 user license validity: 5 yrs 4 libraries qualnet is a network simulation tool to mimic the behavior of real data communication network like the internet with server pc 1 basic project lab tools & instruments 1. soldering gun 2. de soldering pump 3. antistatic mat for 2” x 3” 4. nose plair 5. cutting plair 6. sleeve remover 7. 3 ¾ digit rishmulti 12s 8. bread board 9. single stand wire ( 10mtr 10. crocodile clip with patch cord 11. solder lead 12.ar ps 302d dc regulated power supply with short circuit & over load protection 0 30v / 2a dual output with two digital meters 13. hand held lcr meter 2 mini projects assembled & tested a ) als stuprj1 smoke alarm b ) als stuprj2 heat alarm c ) als stuprj3 metal detector d ) als stuprj4 touch alarm e ) als stuprj5 electronic harmonium 3 mini projects assembled & tested includes the following f ) als stuprj6 lead acid battery charger g ) als stuprj7 grip tester h ) als stuprj8 light operated relay i ) als stuprj9 light dimmer j ) als stuprj10 water level controller 4 mini projects assembled & tested includes the following k ) als stuprj11 door bell / moisture sensor l ) als stuprj12 beat generator m ) als stuprj13 police siren n ) als stuprj14 linear power supply 5 mini projects assembled & tested includes the following o ) als stuprj15 rf encoder transmitter & decoder receiver 6 adaptor 7 project boards for embedded segment controller boards 1.als pjt89c51ed2 ed2 project with proto board 2.als pjt arm2148 arm project board with proto board 3. als pjt fpga 01 fpga 3s400 project board with proto board 4. als pjtbrd armctxm3 01 arm cortex m3 project board with proto board 5.als pjt proto 01 proto board ( additional ) 8 evaluation boards for study a ) als sda emb eval 03 embedded controller kit b ) power supply ( 5v, 1.5a, + / 12v, 100ma ) 9 mini projects controller based 1. als prj / proto / 01 relay project boardone normally closed contact and one normally open contact channel: 4 channel relay operating voltage: 3.3v to 5v triode drive, increasing relay coil high impedance controller pin pull down circuit for avoidance of malfunction power supply indicator and control indicator lamp power supply and relay instructions, lit, disconnect is off; input signal, signal, common terminal and start conducting; useful for appliance control; dc or ac signal, control, you can control the 220v ac load; there is a normally open and one normally close contact; the module is compliant with international safety standards, control and load areas isolation trenches. 10 accessories for controller based projects 1.als pjtbrd / acc / 01 4 channel relay board each / no 1 2.als pjtbrd / acc / 02 4 x 7 segment display board each / no 1 3.als pjtbrd / acc / 03 4 x 4 keypad board each / no 1 4.als pjtbrd / acc / 04 6 keypad board each / no 1 5.als pjtbrd / acc / 05 2 x 16 lcd board each / no 1 6. als pjtbrd / acc / 06 8 led board each / no 1 11 technology study modules 1. als prjbrd ucxp1—01a finger print based door lock each / no 1 2.als prjbrd ucxp2 01a gps location indicator each / no 1 3. als prjbrd ucxp3 01a gsm based home security gsm module each / no 1 4.als prjbrd ucxp4 01 graphic lcd with sensors each / no 1 5.als prjbrd ucxp5 01 zigbee based wireless data acquision system ( min 2nos required for experiment ) each / no 1 6.als prjbrd ucxp6 01 rfid based access control each / no 1 7.als prjbrd ucxp7 01 bluetooth based servo motor each / no 1 12 evaluation board of vhdl kit a ) als sda cpld / fpga 02 universal base board with fpga 3s400 each / no 1 b ) power supply ( 5v, 1.5a, + / 12v, 100ma ) each / no 1 interfaces for the above a ) als nifc 01a stepper motor interface each / no 1 b ) als nifc 05a logic controller interface each / no 1 c ) als nifc 27 adc / dac interface each / no 1 d ) als nifc 17 elevator interface each / no 1 e ) als nifc 11 traffic light interface each / no 1 f ) als nifc 58 temperature and relay interface each / no 1 arm 2148 trainer kit als sda arm7 06 arm7 evaluation board each / no 1 optional : power supply ( 5v, 1.5a, + / 12v, 100ma ) each / no 1 to serial converter each / no 1 als sda arm7 07 arm7 2148 evaluation board optional : each / no 1 power supply ( 5v, 1.5a, + / 12v, 100ma ) each / no 1 usb to serial converter each / no 1 als sda armctxm3 01 arm cortex m3 evaluation board each / no 1 power supply ( 5v, 1.5a, + / 12v, 100ma ) each / no 1 usb to serial converter each / no 1 als sda armctxm3 06 arm cortex m3 1768 evaluation board each / no 1 power supply ( 5v, 1.5a, + / 12v, 100ma ) each / no 1 usb to serial converter each / no 1 13 external interfaces for arm board 1.als nifc 71 rfid interface each / no 1 2. als nifc 72 gsm interface each / no 1 3.als nifc 73 zigbee interface each / no 1 4.als nifc 74 gps co ordinator each / no 1 5.als nifc 75 bluetooth interface each / no 1 6.als nifc 76 graphic lcd interface each / no 1 7.als nifc 77 keypad and dtmf tone generator each / no 1 14 basic electrical engineering lab 1 verification of kvl and kcl for dc circuits this set consists a ) regulated dc power supply – 30v @ 2a b ) edm type analog dc voltmeters – 30v 3 nos. c ) edm type analog dc ammeters – 2a 3 nos. d ) rheostats – i ) 50 ohms / 2a ii ) 100 ohms / 2 a iii ) 150 ohms / 2 a each / no 1 2 measurement of current, power and power factor of incandescent lamp, fluorescent lamp and led lamp: and two way and three way control of lamp and formation of truth table this set consists of : screen printed polycarbonate panel board enclosed in powder coated ms frame consists of mcb, indicator, fuse, single phase digital multifunction meter with ct for direct measurement, 1 no. incandescent lamp, 1 no. fluorescent lamp and 1 no. led lamp. 2 nos of 2 way switches and 1 no. of intermediate switch with terminals for inter connection each / no 1 3 measurement of resistance and inductance of a choke coil using 3 voltmeter method this set consists of : a ) screen printed polycarbonate panel board enclosed in powder coated ms frame consists of mcb, indicator, fuse, 3 nos of digital voltmeters, 1 no. of digital ammeter, single phase auto transformer – 0 270v @ 2a. and 2a choke coil. variable dc supply of 0 200v dc @ 2a for dc motor armature supply and 220v + / 10 % @ 0.5a for field supply to study dc motor control. variable ac current supply of 0 20a ac for testing fuse and mcb. b ) rheostat – 470 ohms / 1.2a each / no 1 4 determination of phase and line quantities in three phase star / delta connected loads: this set consists of : a ) screen printed polycarbonate panel board enclosed in powder coated ms frame consists of mcb, indicator, fuse, 2 nos of ac voltmeters, 2 nos of ac ammeters. b ) three phase auto transformer 0 470v @ 6a mounted on trolley and terminals are brought out on the panel. three phase resistive load – 5 a ( per phase ) / 5 steps suitable for star and delta connection. each / no 1 5 measurement of three phase power using two wattmeter method: this set consists of : a ) screen printed polycarbonate panel board enclosed in powder coated ms frame consists of mcb, indicator, fuse, 1 no of ac voltmeter, 1 no. of ac ammeter and 2 nos of upf wattmeters. b ) three phase auto transformer 0 470v @ 6a mounted on trolley and terminals are brought out on the panel. c ) three phase resistive load – 5 a / 5 steps suitable for star and delta connection. each / no 1 6 measurement of earth resistance: digital earth resistance tester – 10 / 1000 ohms – waco make with testing kit. each / no 1 7 study of effect of open and short circuit in simple circuit: this set consists of: screen printed polycarbonate panel consists of mcb, indicator, fuse, single phase transformer – 500va, primary: 230v, secondary:115v and 2v @ 20a transformer tapping . single phase auto transformer – 2 a, digital ac voltmeter, digital ac ammeter to study open circuit voltage of transformer and short circuit current at low voltage. each / no 1 8 demonstration of cut out sections of electrical machines ( dc machines, induction machines and synchronous machines ) : this set consists of : a ) working cut section of dc shunt motor – 0.5 hp / 220v b ) working cut section of 2 and 4 pole 3 phase induction motor – 0.5 hp / 415v c ) cut section of 3 phase synchronous motor – 1 hp / 415v d ) tester, test lamp and silicon tester ( non contact type ) e ) ups demo kit – open type to observe different parts of ups – 500va each / no 1 15 computer aided building planning & drawing lab 1 desktops: computer configuration a ) processor intel i7 dual core b ) ram 8gb / 6gb c ) hard disk d ) mother board – intel chipset e ) graphics card – 1gb dedicated n vidia graphics card f ) lan g ) monitor 17” led / tft h ) keyboard i ball i ) mouse – i ball each / no 1 2 printers with scanner: the xerox machine comes with a3 black and white mfp with a brisk output speed of 20 ppm, providing maximum efficiency for document processing in your office. dis reliable mfp has been designed to provide you with robust performance in demanding office environments. the comes with an energy saving key, putting it instantly into sleep mode, reducing youre energy bill. • id card scan function copies both sides on to a single sheet, saving you time • two short cut keys can be customized to perform frequently performed tasks quickly general specification: continuous output speed:20 pages per minute memory standard: 256 mb power source:220 240 v, 50 / 60 hz options 1 x 500 sheet paper tray ( maximum 2 units ) , network controller ( ddst unit ) , and bypass tray cover. paper handling: recommended paper size: standard paper tray ( s ) : a3, a4, a5 by pass tray:a3, a4, a5, a6 paper input capacity standard: 350 sheets maximum: 1, 350 sheets bypass tray: 52 216 g / m² duplex: 64 105 g / m² copier:copyingprocess:laser beam scanning & electro photographic printing multiple copying: up to 99 copies resolution: up to 600 dpi zoom from 50% to 200% scanner: scan speed colour: maximum 6 originals per minute b / w:maximum 15 originals per minute interface standard: usb 2.0 option: ethernet 10 base t / 100 power consumption:lesstempthan 950 w ready mode:92 w sleep mode:2.7 w tec ( typical electricity consumption ) :1, 480 w / h each / no 1 3 hp laserjet configuration black and white, print, copy, scan , 1 hi speed usb 2.0 , laser, a4 black and white laser, multifunction printer, perfect for enterprise, print, copy and scan, print speed up to 21 ppm ( black ) preinstalled introductory hp laserjet black cartridge ( ~700 pages ) installation guide, getting started guide, users guide, support flyer, warranty guide printer software and documentation on cd power cord , usb cable each / no 1 4 autocadd 2022 ( 30 users license software ) each / no 1 5 projector mativeresolution:xga 1024 x 768 brightness:3700 lumes lamp life: upto 10, 000hrs contrast ratio:16, 000:1 video compataibility:ntsc, pal hdmi:720p, 576p, 576i, 480p, 480i, 1080i, 1080p audio:audio out connector support with 16w audio output zoom focus:manual display input:vgax2 , hdmi x 2 , usb, composit av , mhl, wifi aspect ratio:4:3 and 16:9 remote :full function connectivity hdmi / vga, mhl, wifi each / no 1 6 smart board infrared interactive whiteboard interactive whiteboard is an instruction tool that allows computer images to be displayed onto a board using a digital projector. the instructor can then manipulate the elements on the board by using his finger as a mouse directly on the screen. items can be dragged, clicked and copied and the lecturer can handwrite notes, which can be transformed into text and saved. this makes the learning interactive and collaborative. specifications as per the make in india model: model:82”m19 size: 82 aspect ratio: 4:3 active area ( mm ) ( wh ) :1680 *1185 overall size ( mm ) ( w*h*d ) :1741*1246*35 packing size ( mm ) : 1890 1395 90 technology: infrared sensor technology calibration: 4 points or 9 points writing method: pen, fingers or any other pointing objects multi touch: 10 touch points communication port: usb 2.0 hotkey:20 hotkeys on each side of board outer frame:82m19 natural aluminum alloy section each / no 1 7 ups and batteries 10 kva – ups10 kva ups • type: online single phase input & single phase output • capacity : 10kva • backup time: 4 hours or higher • input frequency: 50hz.+ / 5% • input voltage : 160v 270v • output voltage:230v+ / 1%v • output frequency : 50hz+ / 0.2hz. • input power factor: >0.9 • output power factor: 0.8 lag to unity • pf waveform: pure sine wave • alarm: on battery, low battery, ups over load • no. of batteries: compatible • dc voltage ( input ) :compatible • overload capacity : 150% for 1minute , 125% for 10minutes • inverter efficiency : 90% • overall efficiency: 90% • crest factor: 3:01 • regulation: + / 1% • switching frequency : above 20khz • technology: igbt based pwm technology with isolation transformer • warranty : 3 years onsite comprehensive including batteries • protection: automatic discharge protection with self test features, overload surge protection , input fault, cold start, low battery , battery over charge, output short circuit, charging current circuit, inverter over temperature • lcd display : output voltage, output current, load%, output frequency, input voltage, battery voltage • load test: at 100% load on resistive load thd: <3% for linear, <5% for non linear • certification: iso 9001:2008 or higher, etdc / cpri test report &bis certification each / no 1 8 lan connection for systems and printers each / no 1 16 building materials testing laboratory 1 universal testing machine with extensometer analogue cum computerized universal testing machine with following specifications a ) measuring capacity : 1000kn analogue system : i range 0 1000kn ( least count 2kn ) ii range 0 500kn ( least count 1kn ) iii range 0 250kn ( least count 0.5kn ) iv range 0 1000kn ( least count 0.2kn ) computerized system: measuring range ( kn ) : 0 to 1000kn ( least count 0.1kn ) with measurement accuracy of ±1% extensometer ( mechanical ) : range – 50mm ( least count 0.1mm ) each / no 1 2 compression testing machine analogue cum computerized compression testing machine with following specifications measuring capacity : 3000kn analogue system : i range 0 1000kn ( least count 2kn ) ii range 0 2000kn ( least count 5kn ) iii range 0 3000kn ( least count 10kn ) computerized system: measuring range ( kn ) : 0 to 3000kn ( least count 2kn ) with measurement accuracy of ±1% each / no 1 3 torsion testing machine capacity 100n mtdisplay type digital model name / number ratnakarrtt60d brand ratnakar maximum clearance between grips 500mm grips for square specimens 5 15mm grips for flat specimens 5 12x40mm type digital feature highly reliable voltage 440v frequency 50hz phase three phase supply type ac maximum capacity 100nm least count 0.01nm each / no 1 4 bending testing machine digital flexure testing machine, capacity 100 kn ( aim 332e dg 1 ) each / no 1 5 shear box direct shear apparatus 6speed motorized with loading unit, housing and mould, perforated and non perforated plates, proving ring 10kn, dial gauge of 0.01 x 25mm and slotted weights each / no 1 6 izod charpy pendulum type impact testing machine capacity 170 ( izod ) / 300 ( charpy ) joules cylinderical cup and tammping rod as per astm / bis specification pendulum drop angle: ( 140 degree for charpy test ) & ( 90 degree for izod test ) pendulam effective wt.: ( 21.400 kg for charpy test ) & ( 21.300 kg for izod test ) pendulum impact energy : 300j ( charpy test ) & 168 j for izod test striking velocity of pendulum: 2.45 m / sec for charpy test & 3.857 m / sec for izod testmin scale graduation: 2j max permissible loss by friction etc.: 0 .50% of impact energy the pendulum impact tester is designed for conducting izod, charpy test. each / no 1 7 brinell hardness tester capacity 120 kgf optical magnification:35x, 70x & 140x brinell hardness tester salient features: • automatic zero setting dial gauge • load selection just by dialing externally • capacity throat 150m, max test height – 295 mm • confirm to is: 3804, bs 891, astm: e 18 for rockwell tests and is: 2281, bs: 240, astm: e 10 for brinell tests specification model unit rab 1 loads kgf. 60, 100, 150, 187, 5, 250. initial load kgf. 10 maximum test height mm 295 depth of throat mm 150 maximum depth of elevating screw mm 240 below base size of base ( approximately ) mm 173*425 machine height mm 635 each / no 1 8 rockwell hardness tester capacity 250 kgfrock well hardness tester salient features: • automatic zero setting dial gauge • load selection just by dialing externally • capacity throat 150m, max test height – 295 mm • confirm to is: 3804, bs 891, astm: e 18 for rockwell tests and is: 2281, bs: 240, astm: e 10 for brinell tests specification model unit rab 1 loads kgf. 60, 100, 150, 187, 5, 250. initial load kgf. 10 maximum test height mm 295 depth of throat mm 150 maximum depth of elevating screw mm 240 below base size of base ( approximately ) mm 173*425 machine height mm 635 each / no 1 9 vickers hardness tester capacity 50 kgf optical magnification:35x, 70x & 140xparameter hv display type optical model name / number rvm 50 accuracy high brand ratnakar test loads 5, 10, 20, 30 & 50 kgf ( optional 1kgf, 2.5kgf and 3kgf ) optical magnification 70x scale least count 0.001mm each / no 1 10 tool makers microscope : [ travel x.y axis : 50 x 50 mm, working distance : 67mm, magnification : 30 x ( 15x eyepiece x 2x object lens each / no 1 11 tiles testing machine tiles testing machine material mild steel weight 260kg power 0.25 to 4 kw frequency 50 / 60 hz voltage 220 440 v each / no 1 12 hot air oven alu. chamber, 350x350x350mm, thermostatic ( digital digital hot air oven size: 14 x 14 x 14 with ss inside and ms with powder coating outside 2nos shelves to keep the samples inside imported thermostatically controlled ( + / 2degrees c accuracy ) each / no 1 13 digital weighing balance capacity: 30kg with 5grm accuracyweighing balance 30kg ( 0.1gm least count ) capacity 2 sets as per astm / bis 30kg capacity, 1gma accuracy maximum weight: 30 kg, minimum weight: 10 grams, accuracy: 1 gram large green backlight lcd display: for easy readability can run on aa batteries and also directly from electricity using a adaptor. ( both included ) multiple units of measurement: kg, g, lbs, ct , tola. tare function to subtract the weight of objects, and also piece counting function to be used with small objects each / no 1 14 fine aggregate sieve set standard is sieve set brass sieves 200mm dia set of 7 4.75, 2.36, 1.18mm, 600, 300, 150mic, l&p each / no 1 15 metal tray 12x12 each / no 1 16 sieve shaker motorized, with timer 0 60mins, 0.25 hp moto relectrical sieve shaker with 12 adaptor sieve shaker is the only sieve shaker specifically designed for portable use without ac power supply. hand operated shakers from other sources are merely adapted from motor driven units without regard for discomforts of hand cranking or other needs of the field operator. cranking effort is minimized through the use of quality flange bearings at both shaft ends, and counterbalanced mechanism. the special removable crank is provided. approximately one turn per sec. gives desired sieving action. lightweight at only 43 lb ( 19.5kg ) , the unit also has recessed handles on sides for carrying. no special mounting hardware is required. four oversized pliable rubber feet improve machine grip to work surface. the unit holds 8 full height 8 ( 203mm ) sieves and pan with sturdy painted steel case, and has 3 way sieving action and cover clamping features. each / no 1 17 coarse aggregate sieve set standard is sieve set gi sieves 300mm dia set of 7 40, 20, 10, 16, 12.5, 4.75mm, l&p each / no 1 18 density basket as per is:2386 ( part iii ) , made of gi wire mesh shape : cylindrical basket, size : 20x20 cm each / no 1 19 specific gravity bottles 100ml each / no 1 20 loading frame 100 tonnes capacity each / no 1 21 digital slide calipers type of product: digimatic vernier calipermeasuring range ( mm ) : 0 150 mmresolution ( mm ) : 0.01 mmmeasuring range ( inch ) : 0 6 inchresolution ( inch ) : 0.005 inchmaterial: stainless steelpower supply: button type silver oxide battery sr44includes: product catalog , plastic casedisplay: lcdaccuracy: ±0.001 inch each / no 1 22 digital screw gauge type of product: digimatic micrometerrange ( mm ) : 0 25 mmresolution ( mm ) : 0.001 mmweight: 0.275 kgpower supply: battery sr 44includes: including box, key, 1 battery, setting standard certificate of inspectionmaterial: stainless steellength ( mm ) : 157 mmaccuracy: ±2μmbreadth ( mm ) : 58 mm each / no 1 23 punch size 100 mm brand colour blue material chromium vanadium steel package contents 1 pc center punch 100 mm 4 inch insulated no item weight 150 g type center pun each / no 1 24 steel scale the set include 1 piece 12 inch ( 300 mm ) ruler and 1 piece 6 inch ( 150mm ) ruler each / no 1 25 steel tamping rod of 10mm diameter each / no 1 26 1000ml glass container each / no 1 27 tamping rod of 16mm diameter each / no 1 28 tool makers microscope : [ travel x.y axis : 50 x 50 mm, working distance : 67mm, magnification : 30 x ( 15x eyepiece x 2x object lens ) ] each / no 1 29 demec gauge 200mm 200mm dial 1 div = 8 x 10 to power of minus 6 2.6kg 300 x 200 x 110mm each / no 1 30 dial gauge 200mm item weight ‎0.28 g product dimensions ‎11.99 x 10.01 x 5 cm; 0.28 grams item model number ‎7212 item height ‎1.97 inches item width ‎3.94 inches each / no 1 31 digital strain gauges each / no 1 32 digital strain indicators type si 100 range 2000.0 micro strain gauge resistance 350 ohms bridge quarter, half & full non linearity ± 0. 05% of full scale tare digital tare sensitivity can be calibrated by key pad power 230v bridge excitation 10 v dc gauge factor setting 1.00 to 10.00 bridge factor can be entered through keypad type of bridge can be entered through keypad each / no 1 33 projector mativeresolution:xga 1024 x 768 brightness:3700 lumes lamp life: upto 10, 000hrs contrast ratio:16, 000:1 video compataibility:ntsc, pal hdmi:720p, 576p, 576i, 480p, 480i, 1080i, 1080p audio:audio out connector support with 16w audio output zoom focus:manual display input:vgax2 , hdmi x 2 , usb, composit av , mhl, wifi aspect ratio:4:3 and 16:9 remote :full function connectivity hdmi / vga, mhl, wifi each / no 1 34 smart board infrared interactive whiteboard interactive whiteboard is an instruction tool that allows computer images to be displayed onto a board using a digital projector. the instructor can then manipulate the elements on the board by using his finger as a mouse directly on the screen. items can be dragged, clicked and copied and the lecturer can handwrite notes, which can be transformed into text and saved. this makes the learning interactive and collaborative. specifications as per the make in india model: model:82”m19 size: 82 aspect ratio: 4:3 active area ( mm ) ( wh ) :1680 *1185 overall size ( mm ) ( w*h*d ) :1741*1246*35 packing size ( mm ) : 1890 1395 90 technology: infrared sensor technology calibration: 4 points or 9 points writing method: pen, fingers or any other pointing objects multi touch: 10 touch points communication port: usb 2.0 hotkey:20 hotkeys on each side of board outer frame:82m19 natural aluminum alloy section each / no 1 35 printers with scanner: the xerox machine comes with a3 black and white mfp with a brisk output speed of 20 ppm, providing maximum efficiency for document processing in your office. dis reliable mfp has been designed to provide you with robust performance in demanding office environments. the comes with an energy saving key, putting it instantly into sleep mode, reducing youre energy bill. • id card scan function copies both sides on to a single sheet, saving you time • two short cut keys can be customized to perform frequently performed tasks quickly general specification: continuous output speed:20 pages per minute memory standard: 256 mb power source:220 240 v, 50 / 60 hz options 1 x 500 sheet paper tray ( maximum 2 units ) , network controller ( ddst unit ) , and bypass tray cover. paper handling: recommended paper size: standard paper tray ( s ) : a3, a4, a5 by pass tray:a3, a4, a5, a6 paper input capacity standard: 350 sheets maximum: 1, 350 sheets bypass tray: 52 216 g / m² duplex: 64 105 g / m² copier:copyingprocess:laser beam scanning & electro photographic printing multiple copying: up to 99 copies resolution: up to 600 dpi zoom from 50% to 200% scanner: scan speed colour: maximum 6 originals per minute b / w:maximum 15 originals per minute interface standard: usb 2.0 option: ethernet 10 base t / 100 power consumption:lesstempthan 950 w ready mode:92 w sleep mode:2.7 w tec ( typical electricity consumption ) :1, 480 w / h each / no 1 36 hp laserjet configuration black and white, print, copy, scan , 1 hi speed usb 2.0 , laser, a4 black and white laser, multifunction printer, perfect for enterprise, print, copy and scan, print speed up to 21 ppm ( black ) preinstalled introductory hp laserjet black cartridge ( ~700 pages ) installation guide, getting started guide, users guide, support flyer, warranty guide printer software and documentation on cd power cord , usb cable each / no 1 17 engineering geology laboratory 1 streak plates each / no 1 2 knifes each / no 1 3 convex lens ( small for mineral grain size identification ) each / no 1 4 folds, faults dyke, sill, volcano, unconformity models painting on wood. each / no 1 5 250 ml measuring jar / bottles for acidic test of minerals and glass rods. each / no 1 6 projector mativeresolution:xga 1024 x 768 brightness:3700 lumes lamp life: upto 10, 000hrs contrast ratio:16, 000:1 video compataibility:ntsc, pal hdmi:720p, 576p, 576i, 480p, 480i, 1080i, 1080p audio:audio out connector support with 16w audio output zoom focus:manual display input:vgax2 , hdmi x 2 , usb, composit av , mhl, wifi aspect ratio:4:3 and 16:9 remote :full function connectivity hdmi / vga, mhl, wifi each / no 1 7 smart board infrared interactive whiteboard interactive whiteboard is an instruction tool that allows computer images to be displayed onto a board using a digital projector. the instructor can then manipulate the elements on the board by using his finger as a mouse directly on the screen. items can be dragged, clicked and copied and the lecturer can handwrite notes, which can be transformed into text and saved. this makes the learning interactive and collaborative. specifications as per the make in india model: model:82”m19 size: 82 aspect ratio: 4:3 active area ( mm ) ( wh ) :1680 *1185 overall size ( mm ) ( w*h*d ) :1741*1246*35 packing size ( mm ) : 1890 1395 90 technology: infrared sensor technology calibration: 4 points or 9 points writing method: pen, fingers or any other pointing objects multi touch: 10 touch points communication port: usb 2.0 hotkey:20 hotkeys on each side of board outer frame:82m19 natural aluminum alloy section each / no 1 18 surveying practice 1 total stationsokkia total station, model im 105, 5seconds accuracy 500mtrs reflectorless function, 36hours single battery back up, latest state of the art edm, usb downloading facility, original japan make, double side display, comes with a charger in a plastic case each / no 1 2 auto level, accuracy ( per double km run ) : ±1.0mm magnification:32x telescope:erect objective aperture:40mm focusing distance:from 0.5m multiplication factor:100 additive factor:0 waterproof:yes working range:±15′ setting accuracy:±0.3″ bubble sensitivity:8′ / 2mm circle graduation;1 degree weight:1.3kg each / no 1 3 levelling staffmaterial: aluminium leveling staff with canvas cover number of sections 5 | working range is 6 meter powder coated finish – premium quality powder coating finish to ensure long life of the product. clear both side markings – both side clear markings to help you in accurate land surveying. sectional design – 5 sections with push buttons for extending and shortening of the rod. transportation is never an issue now! each / no 1 4 measuring tape 30 meters lengthfoster 30 meter fibre glass measuring tape, unbreakable abs case stands up to the toughest jobsite demands.tape is non conductive, non creasing, water resistance and durable against wear and tear. heat sealed markings on tape ribbon for prolonged life. class iii guaranteed by eectem dimensions lxwxh 17 x 17 x 4 centimeters blade length 30 metres measurement accuracy 1.5 mm each / no 1 5 projector mativeresolution:xga 1024 x 768 brightness:3700 lumes lamp life: upto 10, 000hrs contrast ratio:16, 000:1 video compataibility:ntsc, pal hdmi:720p, 576p, 576i, 480p, 480i, 1080i, 1080p audio:audio out connector support with 16w audio output zoom focus:manual display input:vgax2 , hdmi x 2 , usb, composit av , mhl, wifi aspect ratio:4:3 and 16:9 remote :full function connectivity hdmi / vga, mhl, wifi each / no 1 6 smart board infrared interactive whiteboard interactive whiteboard is an instruction tool that allows computer images to be displayed onto a board using a digital projector. the instructor can then manipulate the elements on the board by using his finger as a mouse directly on the screen. items can be dragged, clicked and copied and the lecturer can handwrite notes, which can be transformed into text and saved. this makes the learning interactive and collaborative. specifications as per the make in india model: model:82”m19 size: 82 aspect ratio: 4:3 active area ( mm ) ( wh ) :1680 *1185 overall size ( mm ) ( w*h*d ) :1741*1246*35 packing size ( mm ) : 1890 1395 90 technology: infrared sensor technology calibration: 4 points or 9 points writing method: pen, fingers or any other pointing objects multi touch: 10 touch points communication port: usb 2.0 hotkey:20 hotkeys on each side of board outer frame:82m19 natural aluminum alloy section each / no 1 19 concrete and highway materials laboratory 1 los angels abrason testing machine as per astm / bis specification consists of a hollow steel cylinder, closed at both ends, having an inside diameter of 700mm and inside length of 500mm. the cylinder mounted on a sturdy frame on ball bearings. the opening is closed dust tight with a removable bolted cover in place. a detachable shelf which extends through the drum catches the abrasive charge and does not allow it to fall on the cover. the drum is rotated at a speed of 30 33 rpm by an electric motor through a heavy duty reduction gear. fitted with revolution counter and push button starter. supplied complete with a tray for collection of the material. abrasive charge consists of set of 12 nos. cast iron spheres or steel spheres ( hardened steel balls ) approximately 48mm diameter each weigh between 390 445 gram. complete as above. each / no 1 2 is sieve 1.7mm as per astm / bis specification iso 565, 3310 1 opening size 1.70mm sieve frame diameter 200mm frame height half height stacked frame height 1 1 / 8in overall frame height 1 5 / 8in material all stainless steel backing cloth included no estimated shipping weight 2.0lb ( 0.91kg ) each / no 1 3 steel frying pan with trowel as per astm / bis specificationstainless steel gas and induction compatible fry pan, 220 mm each / no 1 4 thermometer 110 degree celcius as per astm / bis specificationhandheld, display size: 1.9 inches & under, power type: none, display type: analog, max measuring temperature: 70°c 99°c, model number: glass thermometer, usage: household, theory: glass thermometer, each / no 1 5 thermometer 400 degree celcius as per astm / bis specificationtemperature range 5°—400°c division 1.0°c immersion 3in ( 76mm ) type astm application general use length 16.3 ( 415 ) estimated shipping weight 1.0lb ( 0.45kg ) each / no 1 6 weighing balance 100kg ( 1gm least count ) capacity 2 sets as per astm / bis specification heavy duty digital k12 platform weighing scales are here to fulfill your daily weighing needs with great confidence. * this is built as universal scale for all kinds of trades. like industries and kirana shops, ware houses , lpg delivey points , homes etc. * total weighing capacity is 100 kg. * least count 10 g * platform size of 400x400 mm ( 16 × 16 inch ) is an ideal size for medium to large items. * it is built upon sturdy ms structure with anti corrosion epoxy colour coating. makes it safe from rust and atmospheric wear and tear. * digital weighing indicator is a sealed unit with led red display at 60 degree angle and swivel neck attachment for 360 degree movement and viewing from any angle. * it comes with inbuilt battery backup which is sufficient to provide backup of 50 hours on full charging. * in case battery is fully discharged it can be run upon 220 v ac. * it has inbuilt smart weighing mode if enabled from the menu then it can also be use for human / personal weighing scale at gym , schools or hospitals. * easy calibration system keeps the scale error free. warranty: 6 months carry in manufacturer warranty; warranty: manufacturing defects are covered under warranty. it does not covers batteries or optional items. breakage and damages are not covered under warraty.carry in warranty package contents: 1 weighing scale each / no 1 7 weighing balance 30kg ( 0.1gm least count ) capacity 2 sets as per astm / bis 30kg capacity, 1gma accuracy maximum weight: 30 kg, minimum weight: 10 grams, accuracy: 1 gram large green backlight lcd display: for easy readability can run on aa batteries and also directly from electricity using a adaptor. ( both included ) multiple units of measurement: kg, g, lbs, ct , tola. tare function to subtract the weight of objects, and also piece counting function to be used with small objects each / no 1 8 weighing balance 10kg ( 0.01gm least count ) capacity 2 sets as per astm / bis specification each / no 1 9 weighing balance 500gm ( 0.001gm least count ) capacity 2 sets as per astm / bis specification each / no 1 10 impact testing machine including cylinderical cup and tammping rod as per astm / bis specification pendulum drop angle: ( 140 degree for charpy test ) & ( 90 degree for izod test ) pendulam effective wt.: ( 21.400 kg for charpy test ) & ( 21.300 kg for izod test ) pendulum impact energy : 300j ( charpy test ) & 168 j for izod test striking velocity of pendulum: 2.45 m / sec for charpy test & 3.857 m / sec for izod testmin scale graduation: 2j max permissible loss by friction etc.: 0 .50% of impact energy the pendulum impact tester is designed for conducting izod, charpy test. each / no 1 11 thickness gauge and length gauge as per astm / bis specification material metal item dimensions lxwxh 45 x 20 x 15 centimeters compatible material concrete item weight 2 kilograms each / no 1 12 bitumen specific gravity bottles ( is 1202 2002 ) as per astm / bis specificationspecific gravity bottle with stopper of 50ml capacity, which is available in two patterns: * the ordinary capillary type specific gravity bottle with a neck of6mm diameter. * the wide mouthed capillary type specific gravity bottle with a neck of 25mm diameter. the ordinary specific gravity bottle is used for materials which remain absolutely fluid at 270c while the wide mouth capillary type is used for materials which remain semisolid of high viscous at 270c. each / no 1 13 digital bitumen penetrometer as per astm / bis specificationweight ( approx. ) 24 kg resolution 0.01 mm test time 5 seconds ( adjustable from 0.1 to 9999 sec. ) dimensions 270 x 480 x 750 mm measuring range 0 50 mm test load 100 g ( plunger 97.5 g + 2.5 g penetration needle ) each / no 1 14 apparatus for determination of ductility test as per is 1208 2002 :briquette mould, water bath, putty knife & ductility testing machine as per astm / bis specification tainless steel bath temperature controller ( thermostatic / digital ) immersion electric heater constant speed pump cum stirrer carriage holding up to three standard briquette moulds electric motor with gear mechanism stainless steel scale and pointer control panel accessories : 1. thermometer ip 38 c, range 23ºc to 27ºc. 2. briquette mould with base plate. each / no 1 15 softening point test apparatus ( ring and ball apparatus ) , supporting stand, beaker & thermometer as per astm / bis specification material ms phase 1 phase brand eie power 2800w internal dia 8.5 cm x 12 cm depth ( approx. ) two steel balls each 9.5mm dia each / no 1 16 pensky – martens closed tester for testing flash and fire point as per is: 1209 2002 as per astm / bis specification pensky marten flash point apparatus includes oil test jet device electrical heating with energy regulator fitted with motorised f.h.p. electrical stirrer with stand & digital indicator. this apparatus is made as per ip 34, astmd 93 the apparatus consists of brass test cup with handle removable cup cover with spring operated rotating shutter having piolet jet, stirrer with flexible shaft. the assembly rests in air bath which is covered with dome shape metal top. the cup is fitted with insulated handle and locking arrangement near cup flange. the assembly is kept on round shape electric heater with temperature regulator. suitable for operation on 220 volts 50 cycles ac circuits. each / no 1 17 tar viscometer apparatus ( is: 73:2006 ) heating pan, as per astm / bis specification tar viscometer apparatus as per ip 72 and is 1206 standards. it is used for determination the viscosity of road oils and cut back bitumen. it consists s.s. bath with cup of 10 mm or 4mm orifice and sleeve, stirrer with lifting clip and ball. the assembly kept on suitable stand with leveling screws. suitable to operate on 220 volts ac mains. ar viscometer multiple apparatus consist 2 cups in a s.s. water bath mounted on stand with levelling feet. fitted with 1000 watts heater. temperature is controlled by digital electronic controller with f.h.p. electric motor stirrer. supplied with one tar cup lomm and one 4 mm orifice with valves. tar viscometer multiple apparatus each / no 1 18 marshall compaction apparatus to the requirements of aashto:245 electrical loading unit, compaction pedestal, breaking head assembly, flow meter, load transfer bar, specimen moulds 100 mm diameter with base plat, collars, specimen extractor, compaction hammer 4.53 kg x 457 mm fall and marshall moulds with collars 40 no.s as per astm / bis specification each / no 1 19 semi automatic marshall specimen compactor with hammer weight 4.53kg and 457 mm fall complete sets as per astm / bis specification each / no 1 20 gauging trowel as per astm / bis specificationweight approximately 210 gms hard wood handle blade length 200mm blade material carbon steel trowel, carbon steel handle material wood handle, wood type gauging trowel size 5, 6, 7, 8 each / no 1 21 blaines apparatus ( sets ) conforming to ( is 4031 part 2 ) as per astm / bis specification filter paper manometer liquid, 250 ml test stand u manometer tube rubber aspirator plastic funnel each / no 1 22 auto clave as per astm / bis specification material mild steel power electric operation automatic gas cao, mgo each / no 1 23 le chatliers apparatus ( sets ) as per astm / bis specificationmade from a brass spring tensioned split cylinder having internal diameter of 30 by 30 mm high, with two pointers 150 mm long. chromed finishing. used to determine the cement expansion ( soundness ) eighter in cold and in boiling water. weight: 30 g. each / no 1 24 hot plate as per astm / bis specification material metal colour black item dimensions lxwxh 23.9 x 7.9 x 21.6 centimeters each / no 1 25 cube moulds ( 70.6mm ) as per astm / bis specificationfor maintaining the quality of concrete at the construction sites, clients extensively use our range of cube molds. adhering to the industry guidelines and standards, our professionals only use high quality tested iron to fabricate these molds. clients can avail these molds in various sizes as per their specific requirements. our cube molds are hugely appreciated for features like long service life, precision machined structure and finished interior faces each / no 1 26 mortar cube vibrating machine as per astm / bis specificationusage / application cement testing machine driven type motor power 0 1 kw max weight 0 200 kg automation grade manual phase single brand tei vibrating range 0 1 mm portable each / no 1 27 pulse velocity test apparatus ( ( portable ultrasonic non destructive digital interface ) , two transducer leads, reference bar ) as per astm / bis specification capacity 0 3000 us usage / application to test homogeneity & strength of concrete voltage 250 to 1000 v size 400 x 340 x 110 mm brand matest power 230 v standards en 12504 part 4, astm c597, bs 1881:203, nf p18 418 power source nimh 4.8v rechargeable battery weight 2 kg each / no 1 28 flexure testing machine, as per astm / bis specificationmaterial mild steel automation grade semi automatic brand phr voltage 380v 220v capacity 10ton warranty one year power hydraulic size / dimension 150mm x 150mm x 700mm weight 350kg each / no 1 29 compaction testing equipment with 1000cc moulds, 1.5metre square steel tray, compaction standard proctor hammer 2.85 & 4.89 as per astm / bis specification each / no 1 30 california bearing ratio testing machine with energy level 1, 2 & 3 moulds 15 no.s complete sets and compaction hammer of 4.89kg 2 no.s sets as per astm / bis specification each / no 1 31 is sieves ( 90mm, 75mm, 63mm, 45mm, 37.5mm, 26.5mm, 25mm, 22.4mm, 20mm, 19mm, 16mm, 13mm, 13.2mm, 12.5mm, 11.2mm, 10mm, 9.5mm, 6mm, 6.7mm, 5.6mm, 4.75, 3.35mm, 2.8mm, 2.36mm, 1.18 mm, 710, 600, 425, 300, 180, 150, 75, 90, 53 microns along with lid and pan ( 3sets ) as per astm / bis specification each / no 1 32 90 micron is sieve as per astm / bis specification each / no 1 33 slump cone with tammping rod ( sets ) as per astm / bis specification material cast iron height 30 cm weight 8 kg approx diameter at base 20 cm diameter at top 10 cm each / no 1 34 vee bee consistometer apparatus ( sets ) as per astm / bis specificationthe equipment consists of : a vibrating table size 380 mm long and 260 mm wide, resting upon elastic support at a height of about 305 mm above the floor, complete with start / stop switch, cord and plug. a holder is fixed to the base in to which a swivel arm is telescoped with funnel and guide swivel arm is also detachable from the vibrating table. the divisions of scale on the rod record the slump of the concrete in millimeters. supplied complete with a sheet metal container with lifting handles which can easily be fixed to the vibrating table. a slump cone open at both ends with lifting handles and a tamping rod of size 16 mm dia and 600 mm long rounded at both ends. each / no 1 35 compaction factor appartatus ( sets ) as per astm / bis specificationis 1199, 5515. & bs 1881 103 the apparatus is used for determining the workability of fresh concrete provided the maximum size of the aggregate does not exceed 38mm. the test is particularly useful for concrete mixes of very low workability where true slump values are not reliable. specification: it consists of two rigid conical hoppers and a cylinder mounted on a rigid metal frame. the lower openings of the hoppers are fitted with hinged trapdoors having a quick release catches. a circular metal plate is provided to cover the top of the cylinder. supplied complete with one plasters trowel and one tamping rod, 16 mm dia x 600 mm long, both ends rounded. each / no 1 36 concrete cube moulds ( 150 x 150 x 150 mm ) as per astm / bis specification for maintaining the quality of concrete at the construction sites, clients extensively use our range of cube molds. adhering to the industry guidelines and standards, our professionals only use high quality tested iron to fabricate these molds. clients can avail these molds in various sizes as per their specific requirements. our cube molds are hugely appreciated for features like long service life, precision machined structure and finished interior faces each / no 1 37 cylinders ( 150 mm dia x 300 mm height ) as per astm / bis specification each / no 1 38 beam moulds ( 150 x 150 x 700 mm ) as per astm / bis specification100 x 100 x 700 concrete cube mould that is used for construction industries. the provided mould is manufactured with the help of optimum quality raw material and high grade tools under the supervision of adroit professionals. our offered mould is quality checked on various quality measures by our experts. besides, clients can avail this mould from us at pocket friendly prices. each / no 1 39 concrete permeability apparatus, 3 cell for 150mm cube with compressor ( sets ) as per astm / bis specificationhe concrete permeability apparatus comprises of a brass / gunmetal cell of squares cross section mounted on a stand and a pressure chamber is connected to the cell through copper tubing and t connector mounted on the stand with sleeve packed valve and rubber hose pipe with end connections. the cell assembly consists of one base plate, one metal funnel and one top plate, the pressure chamber is fitted with a pressure regulator which helps in regulating the pressure from 0 15kg / cm sq. gauge is for indicating the pressure in the cell. a foot pump and a pressure tube is supplied to develop pressure in the chamber. the apparatus is supplied with a measuring cylinder 500 cc to measure percolated quantity of water. pressure can also be applied by a pressure air line or by a compressor each / no 1 40 plastic measuring jar 1000 ml capacity as per astm / bis specification each / no 1 41 sieve shaker, digital as per astm / bis specificationeight 20kg power 0.5hp voltage 220v capacity 8kg orbital diameter 110mm display type digital frequency 50hz material mild steel each / no 1 42 flow table apparatus as per astm / bis specificationthe flow table apparatus shall be constructed in accordance with fig. 1a and 1b. flow table top shall be constructed from a flat metal plate of minimum thickness 1.5 mm. the top shall have a plan area of 700 mm × 700 mm and a flatness of within 1.5 mm. the centre of the table shall be scribed with a cross, the lines of which run parallel to and out to the edges of the plate, and with a central circle 200 mm in diameter. the under surface of the plate shall be reinforced in order to prevent distortion of the flat surface. the front of the flow table top shall be provided with a lifting handle. the total mass of the flow table top shall be 16 ± 1 kg. each / no 1 43 leather hand gloves as per astm / bis specification each / no 1 44 fibre drums 200 litre, 100litre capacity as per astm / bis specification each / no 1 45 concrete cube vibration machine as per astm / bis specification each / no 1 46 pan mixer mixing capacity: 40 ltrs overall dimension: 910mm x 875mm x 1250mm motor : 2 hp drum rpm : 24 rpm power supply: 440v frequency: 50hz as per astm / bis specification each / no 1 47 vicat apparatus ( conforming to is: 5513 1996 ) with plunger and needle as per astm / bis specification each / no 1 48 stop watch, funnel, trowel, graduated glass cylinders, mixing tray, platens as per astm / bis specification each / no 1 49 le chatelier flask of 250 ml as per astm / bis specification each / no 1 50 specific gravity bottle for cement / pycnometer of 100 ml as per astm / bis specification each / no 1 51 angularity number metal cylinder, tamping rod, balance, metal scoop as per astm / bis specification each / no 1 52 compression testing machine capacity of load up to 40tonnes as per astm / bis specification each / no 1 53 rebound hammer instrument with abrasive stone as per astm / bis specification each / no 1 54 ( l box test apparatus ( l box, measuring scale ) as per astm / bis specification each / no 1 55 u box test apparatus with measuring scale as per astm / bis specification each / no 1 56 j ring test apparatus with slump cone ( astm c1621 / c1621m 06 ) as per astm / bis specification each / no 1 57 v funnel test apparatus ( v funnel, container ) as per astm / bis specification each / no 1 58 slump flow test apparatus ( astm c 1611 / c 1611m 05 ) with set for self compacting concrete ( abrams cone, baseplate ( 900x900mm ) , rule, weighted collar ) as per astm / bis specification each / no 1 59 steel cylinder with open ends, cylindrical measures, tamping rod for aggregate crushing test as per astm / bis specification each / no 1 60 digital oven 600x600x600mm, 224hr, 2.5kw 3shelves 5 c 250 c power 220 volt each / no 1 20 software application laboratory 1 etabs 2021 stadd pro v 22sap 2021, safe v 19 license software 30 users each / no 1 2 computers – desktops computer configuration a ) processor intel i7 10th gen b ) ram 12gb c ) hard disk 1tb d ) mother board – intel chipset e ) graphics card – 2.5gb dedicated n vidia graphics card f ) lan g ) monitor 17” led h ) keyboard i ball i ) mouse – i ball each / no 1 3 hp laserjet configuration black and white, print, copy, scan , 1 hi speed usb 2.0 , laser, a4 black and white laser, multifunction printer, perfect for enterprise, print, copy and scan, print speed up to 21 ppm ( black ) preinstalled introductory hp laserjet black cartridge ( ~700 pages ) installation guide, getting started guide, users guide, support flyer, warranty guide printer software and documentation on cd power cord , usb cable each / no 1 4 projector mativeresolution:xga 1024 x 768 brightness:3700 lumes lamp life: upto 10, 000hrs contrast ratio:16, 000:1 video compataibility:ntsc, pal hdmi:720p, 576p, 576i, 480p, 480i, 1080i, 1080p audio:audio out connector support with 16w audio output zoom focus:manual display input:vgax2 , hdmi x 2 , usb, composit av , mhl, wifi aspect ratio:4:3 and 16:9 remote :full function connectivity hdmi / vga, mhl, wifi each / no 1 5 smart board infrared interactive whiteboard interactive whiteboard is an instruction tool that allows computer images to be displayed onto a board using a digital projector. the instructor can then manipulate the elements on the board by using his finger as a mouse directly on the screen. items can be dragged, clicked and copied and the lecturer can handwrite notes, which can be transformed into text and saved. this makes the learning interactive and collaborative. specifications as per the make in india model: model:82”m19 size: 82 aspect ratio: 4:3 active area ( mm ) ( wh ) :1680 *1185 overall size ( mm ) ( w*h*d ) :1741*1246*35 packing size ( mm ) : 1890 1395 90 technology: infrared sensor technology calibration: 4 points or 9 points writing method: pen, fingers or any other pointing objects multi touch: 10 touch points communication port: usb 2.0 hotkey:20 hotkeys on each side of board outer frame:82m19 natural aluminum alloy section each / no 1 6 printers with scanner:the xerox machine comes with a3 black and white mfp with a brisk output speed of 20 ppm, providing maximum efficiency for document processing in your office. dis reliable mfp has been designed to provide you with robust performance in demanding office environments. the comes with an energy saving key, putting it instantly into sleep mode, reducing youre energy bill. • id card scan function copies both sides on to a single sheet, saving you time • two short cut keys can be customized to perform frequently performed tasks quickly general specification: continuous output speed:20 pages per minute memory standard: 256 mb power source:220 240 v, 50 / 60 hz options 1 x 500 sheet paper tray ( maximum 2 units ) , network controller ( ddst unit ) , and bypass tray cover. paper handling: recommended paper size: standard paper tray ( s ) : a3, a4, a5 by pass tray:a3, a4, a5, a6 paper input capacity standard: 350 sheets maximum: 1, 350 sheets bypass tray: 52 216 g / m² duplex: 64 105 g / m² copier:copyingprocess:laser beam scanning & electro photographic printing multiple copying: up to 99 copies resolution: up to 600 dpi zoom from 50% to 200% scanner: scan speed colour: maximum 6 originals per minute b / w:maximum 15 originals per minute interface standard: usb 2.0 option: ethernet 10 base t / 100 power consumption:lesstempthan 950 w ready mode:92 w sleep mode:2.7 w tec ( typical electricity consumption ) :1, 480 w / h each / no 1 7 15 kva 3hr back up ups for computer each / no 1 8 lan connection for systems and printers each / no 1 21 environmental engineering laboratory 1 nephelo meter turbidity meter as per astm / bis specification each / no 1 2 uv vis spectrophotometer model: xd 7500, make: lovibond germany each / no 1 3 ph meter with ph & orp electrode model: ph 700 make: eutech each / no 1 4 bod incubator model: bio bi 104a, make: biocare each / no 1 5 cod thermoreactor 24 places / holes make: tintometer ( lovibond ) each / no 1 6 cod digestion vials, high range, pk / 25 each / no 1 7 autoclave each / no 1 8 centrifuge each / no 1 9 optional item auto lpg shut off system for flame photometer each / no 1 10 optional item li filter each / no 1 11 optional item ca filter each / no 1 12 optional item auto ignition each / no 1 13 conductivity meter benchtop each / no 1 14 muffle furnace each / no 1 15 hot air oven each / no 1 16 analytical balances– internal calibration each / no 1 17 flocculator ( jar test apparatus ) each / no 1 18 student monocular each / no 1 19 electric bunsen burner each / no 1 20 referigerator each / no 1 21 hot plate each / no 1 22 3362 – all glass double distillation unit, with borosilicate each / no 1 23 colony counter – digital – desk model each / no 1 24 portable dissolved oxigen meter with optical do electrode each / no 1 25 imhoff cones each / no 1 26 chlorine test kit each / no 1 27 magnetic stirrers with hot plate 2 lts each / no 1 28 water bath rectangular ( double walled ) each / no 1 29 3082 desiccators, with cover and porcelain plate each / no 1 30 rotary shaker each / no 1 31 desktop computer withi7, 16gb, 2gb graphics 2tb hdd each / no 1 32 hp laserjet configuration black and white, print, copy, scan , 1 hi speed usb 2.0 , laser, a4 black and white laser, multifunction printer, perfect for enterprise, print, copy and scan, print speed up to 21 ppm ( black ) preinstalled introductory hp laserjet black cartridge ( ~700 pages ) installation guide, getting started guide, users guide, support flyer, warranty guide printer software and documentation on cd power cord , usb cable each / no 1 33 portable ph / conductivity meter each / no 1 34 dc power supply each / no 1 35 noise dozi meter each / no 1 36 ambient air quality analysizer kit each / no 1 glasswares each / no 1 37 gooch crucibles each / no 1 38 funnel each / no 1 39 beakers capacity: 25 ml each / no 1 40 beakers capacity: 50 ml each / no 1 41 beakers capacity: 100 ml each / no 1 42 beakers capacity: 250 ml each / no 1 43 beakers capacity: 2000 ml each / no 1 44 4980 flask , erlenmeyer, conical narrow mouth capacity: 50 ml each / no 1 45 4980 flask , erlenmeyer, conical narrow mouth capacity: 100 ml each / no 1 46 4980 flask , erlenmeyer, conical narrow mouth capacity: 250 ml each / no 1 47 4980 flask , erlenmeyer, conical narrow mouth capacity: 500 ml each / no 1 48 4980 flask , erlenmeyer, conical narrow mouth capacity: 1000 ml each / no 1 49 conical flask with interchangeable stopper capacity: 50 ml each / no 1 50 conical flask with interchangeable stopper capacity: 100 ml each / no 1 51 conical flask with interchangeable stopper capacity: 250 ml each / no 1 52 pipettes capacity: 1 ml each / no 1 53 pipettes capacity: 2 ml each / no 1 54 pipettes capacity: 5 ml each / no 1 55 pipettes capacity: 10 ml each / no 1 56 pipettes capacity: 25 ml each / no 1 57 2124 burettes, each / no 1 58 burette stand ( metal ) size:8x5x24 each / no 1 59 bod bottles , 300ml each / no 1 60 china dishes – small ( 50mm ) each / no 1 61 petri dishes size 80x17mm each / no 1 62 reagent bottle capacity: 250 ml each / no 1 63 reagent bottle capacity: 500 ml each / no 1 64 reagent bottle capacity: 1000 ml each / no 1 65 1519 bottle reagent, amber, wide mouth, graduated, with screw cap and pouring ring each / no 1 66 nesselers tube each / no 1 67 measuring cylinders capacity: 100 ml each / no 1 68 measuring cylinders capacity: 5 ml each / no 1 69 measuring cylinders capacity: 10 ml each / no 1 70 measuring cylinders capacity: 25 ml each / no 1 71 measuring cylinders capacity: 50 ml each / no 1 72 measuring cylinders capacity: 100 ml each / no 1 73 spatula 6” each / no 1 74 magnetic beads each / no 1 75 cod vials each / no 1 76 vials stand each / no 1 77 test tube holder each / no 1 78 laboratory tray each / no 1 79 beaker holder each / no 1 80 projector mativeresolution:xga 1024 x 768 brightness:3700 lumes lamp life: upto 10, 000hrs contrast ratio:16, 000:1 video compataibility:ntsc, pal hdmi:720p, 576p, 576i, 480p, 480i, 1080i, 1080p audio:audio out connector support with 16w audio output zoom focus:manual display input:vgax2 , hdmi x 2 , usb, composit av , mhl, wifi aspect ratio:4:3 and 16:9 remote :full function connectivity hdmi / vga, mhl, wifi each / no 1 81 smart board infrared interactive whiteboard interactive whiteboard is an instruction tool that allows computer images to be displayed onto a board using a digital projector. the instructor can then manipulate the elements on the board by using his finger as a mouse directly on the screen. items can be dragged, clicked and copied and the lecturer can handwrite notes, which can be transformed into text and saved. this makes the learning interactive and collaborative. specifications as per the make in india model: model:82”m19 size: 82 aspect ratio: 4:3 active area ( mm ) ( wh ) :1680 *1185 overall size ( mm ) ( w*h*d ) :1741*1246*35 packing size ( mm ) : 1890 1395 90 technology: infrared sensor technology calibration: 4 points or 9 points writing method: pen, fingers or any other pointing objects multi touch: 10 touch points communication port: usb 2.0 hotkey:20 hotkeys on each side of board outer frame:82m19 natural aluminum alloy section each / no 1 82 hp laserjet configuration black and white, print, copy, scan , 1 hi speed usb 2.0 , laser, a4 black and white laser, multifunction printer, perfect for enterprise, print, copy and scan, print speed up to 21 ppm ( black ) preinstalled introductory hp laserjet black cartridge ( ~700 pages ) installation guide, getting started guide, users guide, support flyer, warranty guide printer software and documentation on cd power cord , usb cable each / no 1 22 computer aided detailing of structures 1 desktops: computer configuration a ) processor intel i7 dual core b ) ram 8gb / 6gb c ) hard disk d ) mother board – intel chipset e ) graphics card – 1gb dedicated n vidia graphics card f ) lan g ) monitor 17” led / tft h ) keyboard i ball i ) mouse – i ball each / no 1 2 printers with scanner and copier: hp laserjet printer a3 the xerox machine comes with a3 black and white mfp with a brisk output speed of 20 ppm, providing maximum efficiency for document processing in your office. dis reliable mfp has been designed to provide you with robust performance in demanding office environments. the comes with an energy saving key, putting it instantly into sleep mode, reducing youre energy bill. • id card scan function copies both sides on to a single sheet, saving you time • two short cut keys can be customized to perform frequently performed tasks quickly general specification: continuous output speed:20 pages per minute memory standard: 256 mb power source:220 240 v, 50 / 60 hz options 1 x 500 sheet paper tray ( maximum 2 units ) , network controller ( ddst unit ) , and bypass tray cover. paper handling: recommended paper size: standard paper tray ( s ) : a3, a4, a5 by pass tray:a3, a4, a5, a6 paper input capacity standard: 350 sheets maximum: 1, 350 sheets bypass tray: 52 216 g / m² duplex: 64 105 g / m² copier:copyingprocess:laser beam scanning & electro photographic printing multiple copying: up to 99 copies resolution: up to 600 dpi zoom from 50% to 200% scanner: scan speed colour: maximum 6 originals per minute b / w:maximum 15 originals per minute interface standard: usb 2.0 option: ethernet 10 base t / 100 power consumption:lesstempthan 950 w ready mode:92 w sleep mode:2.7 w tec ( typical electricity consumption ) :1, 480 w / h each / no 1 3 hp laserjet configuration black and white, print, copy, scan , 1 hi speed usb 2.0 , laser, a4 black and white laser, multifunction printer, perfect for enterprise, print, copy and scan, print speed up to 21 ppm ( black ) preinstalled introductory hp laserjet black cartridge ( ~700 pages ) installation guide, getting started guide, users guide, support flyer, warranty guide printer software and documentation on cd power cord , usb cable each / no 1 4 autocadd 2021 ( latest version ) ( 30 users licensed software ) each / no 1 5 projector mativeresolution:xga 1024 x 768 brightness:3700 lumes lamp life: upto 10, 000hrs contrast ratio:16, 000:1 video compataibility:ntsc, pal hdmi:720p, 576p, 576i, 480p, 480i, 1080i, 1080p audio:audio out connector support with 16w audio output zoom focus:manual display input:vgax2 , hdmi x 2 , usb, composit av , mhl, wifi aspect ratio:4:3 and 16:9 remote :full function connectivity hdmi / vga, mhl, wifi each / no 1 6 lan connection for systems and printers each / no 1 7 server system for 30 computers each / no 1 8 antivirus for all systems total av antivirus pro each / no 1 9 ups and batteries 10 kva – ups10 kva ups • type: online single phase input & single phase output • capacity : 10kva • backup time: 4 hours or higher • input frequency: 50hz.+ / 5% • input voltage : 160v 270v • output voltage:230v+ / 1%v • output frequency : 50hz+ / 0.2hz. • input power factor: >0.9 • output power factor: 0.8 lag to unity • pf waveform: pure sine wave • alarm: on battery, low battery, ups over load • no. of batteries: compatible • dc voltage ( input ) :compatible • overload capacity : 150% for 1minute , 125% for 10minutes • inverter efficiency : 90% • overall efficiency: 90% • crest factor: 3:01 • regulation: + / 1% • switching frequency : above 20khz • technology: igbt based pwm technology with isolation transformer • warranty : 3 years onsite comprehensive including batteries • protection: automatic discharge protection with self test features, overload surge protection , input fault, cold start, low battery , battery over charge, output short circuit, charging current circuit, inverter over temperature • lcd display : output voltage, output current, load%, output frequency, input voltage, battery voltage • load test: at 100% load on resistive load thd: <3% for linear, <5% for non linear • certification: iso 9001:2008 or higher, etdc / cpri test report &bis certification each / no 1 23 geotechnical engineering laboratory 1 pycnometer as per is 2386 ( p iii ) 1kg glass jar with brass cone, locking ring and rubber seal. each / no 1 2 density bottle, 100 ml each / no 1 3 digital hot air oven ( temperature controlled ) dimensions 600 x 600x 600 mm, 224 ltrs, 2.5kw, 3 shelves, range 5°c above ambient to 250°c maximum, accuracy + / 2°c, power supply 220 volts each / no 1 4 digital weigh balance 0.5kg capacity with 0.001g accuracy each / no 1 5 digital weigh balance 5kg capacity with 0.01g accuracy each / no 1 6 any suitable non corrodible air tight container moisture content determination of soil samples each / no 1 7 desiccator with any suitable desiccating agent. convenient size is one about 200 to 250mm in diameter containing anhydrous silica gel. each / no 1 8 speedy moisture meter as per as per is 2720 ( p ii ) , astm d 4944 aashto t 217 wooden carrying case consisting of pressure vessel with clamp for sealing cap, rubber sealing gasket, pressure gauge in percentage moisture content 0 25% or 0 50% on the wet weight basis ( 6 gm ) counter poised balance for weighing samples, scoop for measuring calcium carbide, bottle of calcium carbide ( 500gm ) , a set of 4 steel balls and a cleaning brush. each / no 1 9 infrared moisture meter as per astm d 4944 aashto t 217 suitable for operating on 220 v, 50hz, single phase, ac supply. each / no 1 10 soil testing kit consists of : 12 thick walled test tubes with rubber bungs. 1 tube cleaning brush. 1 bottle of barium sulphate ( 100gm ) 1 bottle of soil indicator ( 100gm ) 1 bottle of distilled water ( 500gm ) 1 spatula. 1 colour chart, range 4.0 to 8.0 ph in 0.5 ph steps. complete with carrying case each / no 1 11 core cutter cylindrical core cutter made of gun metal, 100 mm dia x 130 mm long steel dolly, 25 mm high and 100 mm dia fitted with a lip, to enable it to be located on top of the core cutter rammer with steel rod each / no 1 12 sand replacement kit 1. small sand pouring cylinder, 3. cylindrical calibrating container, 4. cylindrical steel core cutter, 5. metal tray with hole conforming to is 2720 part 28 , 100mm dia each / no 1 13 soil hydrometer as per astm d 422 aashto t 88, bs 1377 2.used for grain size analysis of soils where more than 10% of the material will pass through 75 microns b.s. sieve. manufactured from clear transparent glass having uniform clarity throughout the upper end on which density scale is engraved. the scale range is 0.995 to 1.030 0 density ( gms. / cc ) at 27oc smallest division on the scale is 0.0005. each / no 1 14 high speed stirrer is 2720 ( part iv ) this is for mechanical analysis and also other laboratory applications for stirring speed approximately 4000 r.p.m. under load. a dispersion cup is supported on a rest on the stand of the stirrer and has a removable baffle. for operation on 230v a.c. supplied with dispersion cup or baffle cup. each / no 1 15 standard test sieves 20cm diameter, ( spun brass frame ) as per is :460 ( par t i, ii ) 1978, size available: 4.75mm, 2.80 mm, 2.36 mm, 3.00 mm, 1.70 mm, 1.18 mm, 180 micron, 150 micron, 125 micron, 90 micron, 75 micron, 425 micron, 300 micron, 45 micron. lid and receiver for 200 mm dia sieves, made of brass. each / no 1 16 standard test sieves 30 cm diameter, ( g.i. sheet frame ) as per is :460 ( par t i, ii ) 1978 sizes available : 20mm, 12.5mm, 10mm, 4.75mm, 2.36mm, 1.18mm, lid & receiver in g.i. sheet frame for 300mm dia. each / no 1 17 mechanical seive shaker the shaker should accommodate upto 7 nos. sieves of dia 200 or 300mm, 450mm suitable operation of 230 v a.c. single phase. electrical sieve shaker with 16 adapter each / no 1 18 casagrande liquid limit apparatus complete with casagrandes grooving tool and gauge block conforming to is 2720 part 05 each / no 1 19 cone penetration apparatus with penetration test cone and test cup ( 55 mm dia x 40 mm deep ) conforming to is 2720 part 05 each / no 1 20 plastic limit set consists of one each : i ) porcelain evaporating dish, ii ) shrinkage dish, iii ) glass cup, iv ) perspex plate with three metal prongs, v ) flexible spatula 100mm, vi ) glass cylinder, vii ) 25ml x 1ml, supplied without mercury each / no 1 21 shrinkage limit set consists of one each : i ) porcelain evaporating dish, ii ) shrinkage dish, iii ) glass cup, iv ) perspex plate with three metal prongs, v ) flexible spatula 100mm, vi ) glass cylinder, vii ) 25ml x 1ml, supplied without mercury each / no 1 22 linear shrinkage mould bs 1377 2 a simple mould which is filled with the soil under test. this is then dried and the resulting decrease length of the specimen measured is expressed as the linear shrinkage. it is 25mm dia. x 12.5mm height x 140mm length. each / no 1 23 standard proctor compaction moulds with mould 150mm internal dia x 127.3mm height, 2250ml volume ( gun metal ) , rmmer should be 2 .8 6 k g x 300m m fall, for light compaction test as per is 2720 part vii, each / no 1 24 modified proctor compaction apparatus mould mould 150mm internal dia x 127.3mm height, 2250ml volume ( gun metal ) rammer weight 4 .8 9 k g x 450mm fall, for high compaction test as per is 2720 part viii each / no 1 25 universal permeability test apparatus as per is 2720 ( part xbii ) , permeameter mould of non corrodible material ( gun metal ) having a capacity of 1000 ml, with an internal diameter of 100mm and internal effective height of 127.3mm with 0.1 mm thick.three glass stand pipes a stand with nine glass tubes of 6mm, 10mm, 20mm, 25mm, 40mm, 50mm, 60mm, 70mm, 75mm, bore tube is provided with over flow arrangement for constant head tests. the remaining tubes are used for falling head test. each / no 1 26 unconfined compression tester proving ring type ( hand operated ) as per is: 2720 ( part 10 ) :1991, load frame, hand operated, capacity 50 kn ( 5, 000 kgf ) , mould, 100mm dia x 127.3mm height ( 1, 000ml volume ) with, base plate and collar., proving ring, with integral boss, high sensitivity 2.5kn ( 250 kgf ) capacity, perforated swell plate, 100mm dia x 16mm thickdial gauge , 25mm travel, 0.01mm least count lid & receiver in g.i. frame for 300mm dia x 450mm dia sieves, spencer, 100mm dia x 12.7mm thick, pair of porous stones, 100mm dia x 12.7mm thick, load transfer bar, steel ball soaking tank, 250mm dia x 210mm high. each / no 1 27 direct shear apparatus ( motorized ) as per is: 2720 ( part viii ) , astm d 3080 for determination of the direct shear strength of soils on specimen size 60 mm x 60 mm x 25 mm. specification: the apparatus comprises of the following: loading unit: supplied with load yoke with direct and lever system for applying load. normal stress capacity 8kg / sq.cm. shear box assembly: comprising direct shear box in two halves for a square specimen size 60 x 60 x 25 mm one pair of plain gripper plates, one pair or perforated gripper plates, one pair or porous stones, one top loading pad. shear box housing: accommodates the direct shear box assembly. complete with two ball roller strips. specimen cutter:for cutting 60 x 60 x 25 mm specimen from larger samples. set of weights to give a normal stress of 3 kg / sq.cm. essential accessories: high sensitivity compression ring cap 200 kg one consolidation dial gauge 0.01 mm x 25 mm and one strain dial gauge 0.01 mm x 25 mm and one strain dial gauge 0.01 mm x 25 mm. optional extras: additional set of weights to give a normal stress of 5 kg / cm2 soil sampler for 60 mm x 60mm specimen and test from pad of 50. spares: porous stone for 60 mm x 60 mm size sample available in pairs. each / no 1 28 triaxial test apparatus as per is 2720 ( part xii ) , consisting of load frame, triaxial cell, dial gauge, proving ring & lateral pressure assembly, triaxial cells transfer bar ( loading ram ) passes through linear bearing making it almost friction free. base has four no volume change valves one each for back pressure / pore pressure, confining pressure and top drainage.one plastic drainage tube.accesories sheath stretcher, porous stones, plain discs, top drainage cap, rubber membranes ( pack of 10 ) and o rings. loading frame 50 kn capacity, rate of strain: 0.00001 9.9999 mm / min, pressure controller for confining pressure upto 1700 kpa, lateral pressure assembly: consists of a pressure chamber which has a flanged top 2 cap fitted with a 10 kg / cm . pressure gauge and a valve for pumping in air. water inlet and drain cock are fitted to the chamber. 2 the foot pump supplied easily develops a pressure of 10 kg / cm2 complete with connecting pressure hose. with electricaly operated maching with digitalstrain gauge each / no 1 29 cbr test apparatus motorized as per is : 9669, is : 2720 ( part xvi ) load frame 50kn capacity, a mould of 150 mm. i.d. x 175 mm. high with clamping lugs complete with extension collar and perforated base plate made of gun metal. a cutting collar to fit mould body. a penetration piston assembly of 50 mm. diameter and a bracket for the dial gauge. a perforated swell plate of 148 mm. diameter with an adjustable stem and lock nut. a circular spacing disc of 148 mm. diameter x 47.7 mm. high complete with a removable `t handle. a metal tripod for the dial gauge. dial gauge 2 in. travel & 0.001 in division for cbr penetration measurement, having provision for increasing the dial gauge plunger length. cbr essential : proving ring 10 kn capacityx 0.01 kn / div sensitivity / readability, dial gauge 0.01 mm. x 25 mm. travel. spares: rammer 2.6 kg & 4.89 kg.cbr mould complete with extension collar and perforated base plate, perforated swell plate with adjustable stem and lock nut, solid base plate, cutting collar, penetration piston assembly, metal tripod for dial gauge, circular spacer disc, surcharge weight ( annular ) 2.5 kg, surcharge weight ( slotted ) 2.5 kg each / no 1 30 swell test apparatus load frame, hand operated, capacity 50 kn ( 5, 000 kgf ) , mould, 100mm dia x 127.3mm height ( 1, 000ml volume ) with, base plate and collar., proving ring, with integral boss, high sensitivity 2.5kn ( 250 kgf ) capacity, perforated swell plate, 100mm dia x 16mm thickdial gauge , 25mm travel, 0.01mm least count lid & receiver in g.i. frame for 300mm dia x 450mm dia sieves, spencer, 100mm dia x 12.7mm thick, pair of porous stones, 100mm dia x 12.7mm thick, load transfer bar, steel ball soaking tank, 250mm dia x 210mm high. each / no 1 31 consolidation app. ( three gang ) as per is 2720 ( part xv ) , is 12287, bs 1377, astm d 2435, loading unit, maximum capacity 20kg / cm.sq. having a loading yoke connected to a lever arm with a counter balancing adjustment and having a lever ratio of 1:1 the whole assembly being mounted on a sturdy steel frame stand. the loading unit is so designed that it can be used for consolidation cells of different diameters as well as different dia floating ring type consolidation cells. fixed ring type consolidometer ( odeometer ) cell assembly for testing 60mm dia x 20mm thick specimen comprising: fixed ring for specimens 60mm dia x 20mm thick with guide ring. top and bottom porous stones for 60mm dia specimen. perforated pressure pad, channeled base with water inlet and gasket flanged water jacket, water reservoir with plastic tube and pinch cock. set of weights to give a pressure of 10kg / cm.sq. on 60mm dia specimen, comprising : 7 nos. 0.05 kg / cm .sq., 5nos. 0.1 kg / sq.cm., 6nos. 0.5kg / sq. cm., and 5 nos. 1.0 kg / sq.cm. supplied complete as above but without dial gauge. dial gauge 0.002 mm x 10mm. extension piece, 40 mm long, consolidation test forms pad of 50 for one dimensional consolidation. each / no 1 32 vane shear apparatus as per is 2720 ( part 30 ) 1980. consists of a torque head adjustable in height by means of a lead screw rotated by a drive wheel to enable the vane to be lowered into the specimen. rotation of the vane is by means of a hand wheel which operates a worm gear arrangement turning the upper end of a calibration torsion spring, vane dia, rod dia, vane size & vane height are as per is specifications. the vane shall consist of 4 blades each fixed at 90 degrees to the adjacent blades. the vane blades shall be welded together suitably to a central rod, the maximum diameter of which should preferably not exceed 2.5mm in the portion of the rod which goes into the specimen for the test.the vane shaft is attached through the hollow upper shaft to a resettable pointer, which indicates the angle indicates the angle of torque on a dial graduated in degree the dial reading multiplied by spring factor gives the torque a container for soil sample is also supplied & a sampling tube of 38mm. i.d. & 150mm long can also be used as container . supplied with set of four springs, one each of approx. 2 kgs / cm sq., 4kgs / cm sq., 6 kgs / cm sq. & 8kgs / cm sq. complete as above in a wooden carrying case each / no 1 33 relative density test as per is 2720 ( part xiv ) , the equipment consists one each of: vibratory table, with a cushioned steel vibrating decks about 75cm x 75cm. it has a frequency of approximately 3600 vibratory table, minute under a 11.5kg load. amplitude is variable in between 0.65mm in step of 0.05 to 0.25mm, 0.25 to 0.45 mm and 0.45 to 0.65mm. suitable for operations on 415v, three phase supply. cylindrical metal unit weight mould, 3000ml. capacity.guide sleeve with clamp assembly. surcharges base plate for mould. handle for surcharge base plate. surcharge weight. the total weight together with surcharge base plate and handle is equipment to 140 kg. / sq. cm. for mould. cylindrical metal unit weight mould 15000 ml. capacity. ( total weight together with the above mould & surcharge weight is equivalent to 140 kg. / sq. cm ) dial gauge 0.01mm x 50mm travel. extension piece 25mm for dial gauge. each / no 1 34 proctor needles ( spring type ) as per astm d 1558 the instrument consists of a needle attached to a spring loaded plunger, the stem of which is calibrated to read 0 to 40 kg division. long stem is graduated at every 12.5mm to read depth of penetration and for use with needles of larger areas. the small penetration stem is also graduation in 12.5mm division and is used with needles of smaller areas. needle points one each of 0.25, 0.5, 1.0, 1.5, 2.0, 3.5 and 6.0 sq cm. and one tommy pin is supplied. complete as above in a wooden carrying case. each / no 1 35 pore pressure apparatus 10kg / cm2 the apparatus consists of a panel for wall mounting on which are fitted 1.0 to 10kg / cm sq x 0.1kg cm. sq. a pressure gauge, bourdon tube type 15 cm dia.glass u tube manometer , 50ml burette for measuring the volume change in the soil specimen. pressure pump fitted with four sleeve packed valves, operated by means of a hand wheel on the end of the piston rod which is threaded through the pump cap and gives a smooth, fine adjustment of pressure. copper coil and water reservoir is fitted on board with complete stand assembly. the unit is tested against leaks up to 10kg / cm sq. each / no 1 36 split spoon sampler as per is 2131 1963, is 9640 1980 the sampler is made from a steel tube split length wise & held together by a head fitted with a ball check valve & a hardened steel shoe in size cutting edge of 35mm dia. the sampler is 35mm i.d. & 50.8mm in outer dia & 508mm long. one adopter to connect a type drill rods is also to be supplied. each / no 1 37 standard penetration test set as per is 2131, is 9640 consist of three metal pipe legs approximately 5 mtr. long connected by a tie bolt each leg is made up of two parts for ease of transportation complete with one pulley one leg has building ladder each / no 1 38 drop hammer and guide pipe weight 65 kg. complete with two end caps to give a free fall of 75cm the drop hammer each / no 1 39 dynamic cone penetration test consists of 8 kg weight having a drop of 575 mm, fitted to the end of the shaft is a 20 mm diameter cone. with the standard dcp measurements can be made down to a depth of approximately 850 mm. each / no 1 40 static cone penetrometer, 30kn ( 300kgf ) capacity, hand operated consists of penetration cone, steel 60 angle 10cm base area with friction jacket one mantle tube, non uniform , 36mm od at the two ends and reduced dia in between with sounding rod working length 1mfifteen. load measuring head, with automatic cut off valve and oil can, without pressure gauge one pressure gauge, 0 60kg / cm 2 pressure gauge, 0 160kg / cm one 06 ) screw anchor , with bolt four anchor driving handle one t rod one spanner one extension pipe 0.5m long for anchor driving handle four each / no 1 41 auger posthole type posthole type: ( a ) 100mm dia screw type: ( a ) 38mm, ( c ) 50mm ( c ) 100mm dia extra: extension rod 1 meter length with threading at both ends and couplings, set of two spanners and tee piece. each / no 1 42 sampling tubes in the relieved type of tube, the internal diameter is relieved by about 0.5mm ( inside clearance 2% ) beyond approx. 19mm length from the cutting edge of the tube. unrelieved type of 150mm dia, each / no 1 43 projector mativeresolution:xga 1024 x 768 brightness:3700 lumes lamp life: upto 10, 000hrs contrast ratio:16, 000:1 video compataibility:ntsc, pal hdmi:720p, 576p, 576i, 480p, 480i, 1080i, 1080p audio:audio out connector support with 16w audio output zoom focus:manual display input:vgax2 , hdmi x 2 , usb, composit av , mhl, wifi aspect ratio:4:3 and 16:9 remote :full function connectivity hdmi / vga, mhl, wifi each / no 1 44 smart board infrared interactive whiteboard interactive whiteboard is an instruction tool that allows computer images to be displayed onto a board using a digital projector. the instructor can then manipulate the elements on the board by using his finger as a mouse directly on the screen. items can be dragged, clicked and copied and the lecturer can handwrite notes, which can be transformed into text and saved. this makes the learning interactive and collaborative. specifications as per the make in india model: model:82”m19 size: 82 aspect ratio: 4:3 active area ( mm ) ( wh ) :1680 *1185 overall size ( mm ) ( w*h*d ) :1741*1246*35 packing size ( mm ) : 1890 1395 90 technology: infrared sensor technology calibration: 4 points or 9 points writing method: pen, fingers or any other pointing objects multi touch: 10 touch points communication port: usb 2.0 hotkey:20 hotkeys on each side of board outer frame:82m19 natural aluminum alloy section each / no 1 45 printers : hp laserjet printers a4 size hp laserjet configuration black and white, print, copy, scan , 1 hi speed usb 2.0 , laser, a4 black and white laser, multifunction printer, perfect for enterprise, print, copy and scan, print speed up to 21 ppm ( black ) preinstalled introductory hp laserjet black cartridge ( ~700 pages ) installation guide, getting started guide, users guide, support flyer, warranty guide printer software and documentation on cd power cord , usb cable each / no 1 24 research laboratory 1 2000 kn loading frame each / no 1 2 hydraulic jacks – 1000 kn and 2000 kn, low capacity ( 100 kn and 30 kn ) mechanical jacks each / no 1 3 load cell with digital load indicators – 500 kn, 1000 kn and 2000 kn each / no 1 4 universal testing machine ( 600 kn capacity ) each / no 1 5 portable high speed 4 channel data acquisition system with filters and supporting software and note book pc each / no 1 6 seismic accelerometers with accessories – each / no 1 7 a ) digital demec gauges , each / no 1 b ) digital dial gauges mechanical strain gauges each / no 1 8 4 channel high speed usb supported data acquisition system with filters and software each / no 1 9 seismic accelerometers ( high sensitivity icp type ) with accessories each / no 1 10 finite element analysis package – static and dynamic analysis with linear and non linear analysis modules each / no 1 11 shock table testing facility ( 4.2m x 3.5m ) with a 1400.0kg mass pendulum impacting device each / no 1 12 computerized servo controlled compression testing machine, 2000.0kn capacity, specially designed for testing of masonry prisms each / no 1 25 elements of mechanical engineering 1 cut sectional demonstration model of 2 stroke petrol engine 2 stroke, single cylinder petrol engine test rig with mechanical loading air cooled. description • engine : bajaj • horse power : 1.5 hp. • rated speed : 900 rpm with gear ratio • cooling : air cooled • loading : by rope brake drum with 2 spring balances. • starting : kick start • speed measurement : by digital rpm indicator with proximity sensor • air flow measurement : by air box , orifice with transparent acrylic manometer • fuel measurement : by pipette and stop clock • temperature measurement : by digital temperature indicator with eight way channel selector • engine frame : mounted on anti vibration mounts. • instrumentation : mounted on separate control panel. • calorimeter type ( optional ) : shell and tube type each / no 1 2 cut sectional demonstration model of 4 stroke petrol engine 4 stroke, single cylinder, petrol engine test rig panel a well designed and supported by a good quality painted rigid m.s. structure consists of • speed measurement : by digital rpm indicator with proximity sensor • water flow measurement : by water meter. • air flow measurement : by orifice in air box & transparent acrylic manometer air tank fitted with orifice and water manometer • fuel measurement : by fuel pipette & stop clock fuel measuring system consists of a fuel tank, a burette and a three way cock. • temperature measurement : by digital temperature indicator with eight way channel selector • engine frame : mounted on anti vibration mounts • instrumentation : mounted on separate control panel. • exhaust gas calorimeter : shell and tube type ( optional ) each / no 1 3 francis turbine model each / no 1 4 pelton wheel turbine model description • rotor : 250 mm diameter, 20 cups, aluminium • output : 1.5 hp at 1000rpm • sphere valve assembly : s.s, 20 mm jet. • loading : rope brake drum, 350 mm diameter. spring balance of 0 10 kg. • operating head : 30 50 m • monoblock pump : 5 hp, two stage standard make. • tanks ( s.s ) : sump tank 250 ltrs. capacity • starter : standard make with indicator. • digital speed indicator : with proximity sensor, for rpm measurement. • pressure gauge : 2 nos. • discharge measurement : 2” venturimeter, coated m.s • controlling valves : 1 no, wheel valve • supply : 3 ph, 440 v, 32 amps to be provided by user. • separate control panel : wooden sheet & square tubes each / no 1 5 kaplan turbine model description • rotor : 150 mm diameter, 4 blades, gun metal / c.i. with angle changing mechanism. • out put : 1.5 hp @ 900 rpm. • volute casing : c.i. • loading : alternator, standard make, 2 3 kva, ( lamp loading, 10 nos, 200 w ) . • operating head : 5 10 m. • monoblock pump : standard make, 10 hp. • tanks ( s.s ) : sump tank – 880 ltrs. capacity • starter : standard make with mcb, console switch and red indicator. • digital speed indicator : with proximity sensor for rpm measurement. • energy meter : for out put measurement, standard make. • discharge measurement : venturimeter or bend meter, s.s. • pressure gauge : 2 nos. • vacuum gauge : 1 no. 0 760 mm of hg • controlling valves : 6 inch, butterfly valve. • supply : 3 ph, 440 v, 32 amps to be provided by user. • separate control panel : wooden sheet & square tubes. each / no 1 6 centrifugal pump actual cut section each / no 1 7 vapor compression refrigeration system demo model each / no 1 8 vapor absorption refrigeration system demo model each / no 1 9 gear box demonstration model each / no 1 10 demo model of open and cross belt drives each / no 1 11 robot joints and links ( demo purpose ) each / no 1 12 air conditioning system ( demo model ) each / no 1 26 chemistry laboratory 1 potentiometer ( make: systronics 318 ) specification: input configuration : bipolar, milli volt range : 0 to + / 1999 mv, resolution : 1 mv in mv mode, display : 3 digits led, control set zero range : 0 to + / 1500mv input, stirrer speed : 0 to full speed switch : hold reading when pressed control set zero range : 0 to + / 1500mv input stirrer speed : 0 to full speed switch : hold reading when pressed polarization current : 10 μa for metal to metal electrode input impedance : 10¹¹ ohms polarity : automatic over range : last 3 digits blinking magnetic stirrer : in built with variable control display : 3 ½ digit led power : 230v ac. ±10%, 50 hz dimensions : 235 ( w ) x 185 ( d ) x 85 ( h ) mm weight : 1.25 kg ( approx ) accessories: combined platinum & calomel electrode ( or ) platinum & calomel electrode, electrode stand & clamp, stirrer pedal & instruction manual. each / no 1 2 colorimeter ( make: systronics 113 ) specification: wavelength: 400 to 700 nm selected 6 filters mounted on a turret, light source : 6 volt led, detector: encased spill proof selenium photo cell, display: 3 digit, calibrated directly in optical density, resolution: 0.01 in o.d or abs, standard : turret mounted filters, power: 230v ac + 10%, 50 hz, weight: 4 kg. accessories: four flat bottom test tubes, cuvettes with stand, instruction manual. filters: colour wavelength ( nm ) violet 420 blue 440 blue / green 490 green 520 yellow / green 540 yellow 570 orange 600 red 720 each / no 1 3 conductometer ( make: systronics –mk 509 ) digital model for routine measurement of conductivity of various electrolytes. the instrument using the state of art ic technology and consuming very little power. source frequency ( 100 hz or 1 khz ) gets automatically in the appropriate range. specification: source frequency: 100 hz or 1 khz automatically selected. range: 0 to 200 ms in 5 ranges, accuracy : + / 1 digit indication : 2 ½ digit led display, conductivity cell : 1 cell constant cell compensation : 0.9 to 1.1, power requirement: 230 volt, 50 hz + / 10% standard accessories: 1 ) conductivity cell ( 1.00 c.c + / 10% ) , 2 ) stand & clamp, 3 ) instruction manual. each / no 1 4 ph meter ( make: systronics ) digital model, high precision type for routine chemical analysis work in the laboratory having latest technology ic regulators and lsi circuits. housed in rust proof injection moulded cabinet. specification: ph range : 0 to 14 ph, slope correction : 80% to 110% resolution : 0.01 ph, repeatability : + / 0.01 ph + / 1 digit for ph standardization range: + / 2 ph, temperaturecompensation: 0 to 100 ° c display : 3 ½ digit lcd 7 segment with automatic polarity & decimal point power : 230 volts + / 10% 50 hz, 10va. accessories: combined electrode, stand & clamp and instruction manual. each / no 1 5 aquarium motor ( fish aquarium motor ) jp 700g multi function submersible pump excellent internal filter with pump for small aquariums. recommended for tropical set up only. not suggested for planted tank or marine set up, model : jp 700g, voltage : 110v / 220v / 240v, frequency : 50hz / 60hz power : 12w, h max : 1.2m output : 650h, weight 0.40kg dimensions : 90*51*100mm each / no 1 6 ostwald’s viscometer size: 120x1 mm ( length x internal diameter ) overall height : 237 mm, material : borosil glass each / no 1 7 digital stop clock stainless steel with powder coated paint, digital model, high precision type for routine chemical analysis work in the laboratory. housed in rust proof injection moulded cabinet. each / no 1 8 a laboratory thermometer, which is colloquially known as the lab thermometer, is used for measuring temperatures other than the human body temperature. laboratory thermometers are designed for lab purposes such as checking boiling point, freezing point, or temperature of other substances. specification: it ranges from 10 °c to 110 °c. max. measureable temp.: not less than + 110 °c. min. measurable temp.: not more than + 10 °c. accuracy: the maximum permissible scale error shall not be more than one scale division. length of the thermometer: 300 mm ( +10% variation is acceptable ) . length of main scale: 180mm ±10% scale smallest division: not more than 0.5 °c. bulb length: not less than 10mm and not more than 25mm. stem diameter: not less than 5.5mm and not more than 8mm. bulb diameter of the thermometer: not more than the stem diameter. colour of indicator: red / green / mercury the thermometer shall comply: is 2480. glass thermometer with accurate readings. 100°c thermometer = 5 nos 250°c thermometer = 5 nos. each / no 1 9 calomel electrode ( suitable for systronics 318 ) specification: single junction calomel electrode made up of platinum wire, hg, hg / hgcl2 and saturated kcl solution mounted with glass material. each / no 1 10 platinum electrode ( suitable for systronics 318 ) specification: single junction platinum electrode made up of platinum wire mounted with glass material. each / no 1 11 conductivity cell ( suitable for systronics –mk 509 ) specification: glass type conductivity cell cd 10 ( 1.0 cc ) made up of two paired platinum wire mounted with polymer material. each / no 1 12 glass electrode ( suitable for systronics 335 ) specification: single junction glass electrode made up of silver wire connected to internal reference electrode ( ag / agcl ) mounted with glass material. each / no 1 13 computer ( desktop ) make: dell ( new inspiron 3910 desktop, ultra processor, 12 g ) specification: 12th gen intel® core™ i5 12400 ( 18 mb cache, 6 cores, 12 threads, 2.50 ghz to 4.40 ghz turbo ) windows: 11 home single language, english video card: intel® uhd graphics 730 memory: 8 gb, 1 x 8 gb, ddr4, 3200 mhz hard drive: 256 gb, m.2, pcie nvme, ssd + 1 tb, 7200 rpm, 3.5 inch, sata, hdd fall back color: 180w psu chassis with bronze epa, ports & slots. each / no 1 14 printers : hp laserjet printers a4 size hp laserjet configuration black and white, print, copy, scan , 1 hi speed usb 2.0 , laser, a4 black and white laser, multifunction printer, perfect for enterprise, print, copy and scan, print speed up to 21 ppm ( black ) preinstalled introductory hp laserjet black cartridge ( ~700 pages ) installation guide, getting started guide, users guide, support flyer, warranty guide printer software and documentation on cd power cord , usb cable each / no 1 12 projector mativeresolution:xga 1024 x 768 brightness:3700 lumes lamp life: upto 10, 000hrs contrast ratio:16, 000:1 video compataibility:ntsc, pal hdmi:720p, 576p, 576i, 480p, 480i, 1080i, 1080p audio:audio out connector support with 16w audio output zoom focus:manual display input:vgax2 , hdmi x 2 , usb, composit av , mhl, wifi aspect ratio:4:3 and 16:9 remote :full function connectivity hdmi / vga, mhl, wifi each / no 1 27 research laboratory 1.c programming laboratory 1.computers ( wi fi enabled ) computers:7thgeneration corei5 / i7, 8gb ram, 1tb hdd, 2gb graphics, 23.8 fhd windows 10 all in one desktop pc with wi fi enabled each / no 1 2.server computer higher end specifications each / no 1 printers : hp laserjet printers a4 size hp laserjet configuration black and white, print, copy, scan , 1 hi speed usb 2.0 , laser, a4 black and white laser, multifunction printer, perfect for enterprise, print, copy and scan, print speed up to 21 ppm ( black ) preinstalled introductory hp laserjet black cartridge ( ~700 pages ) installation guide, getting started guide, users guide, support flyer, warranty guide printer software and documentation on cd power cord , usb cable each / no 1 ups and batteries 10 kva – ups10 kva ups • type: online single phase input & single phase output • capacity : 10kva • backup time: 4 hours or higher • input frequency: 50hz.+ / 5% • input voltage : 160v 270v • output voltage:230v+ / 1%v • output frequency : 50hz+ / 0.2hz. • input power factor: >0.9 • output power factor: 0.8 lag to unity • pf waveform: pure sine wave • alarm: on battery, low battery, ups over load • no. of batteries: compatible • dc voltage ( input ) :compatible • overload capacity : 150% for 1minute , 125% for 10minutes • inverter efficiency : 90% • overall efficiency: 90% • crest factor: 3:01 • regulation: + / 1% • switching frequency : above 20khz • technology: igbt based pwm technology with isolation transformer • warranty : 3 years onsite comprehensive including batteries • protection: automatic discharge protection with self test features, overload surge protection , input fault, cold start, low battery , battery over charge, output short circuit, charging current circuit, inverter over temperature • lcd display : output voltage, output current, load%, output frequency, input voltage, battery voltage • load test: at 100% load on resistive load thd: <3% for linear, <5% for non linear • certification: iso 9001:2008 or higher, etdc / cpri test report &bis certification each / no 1 5.batteries rack capacity of 20 to 25 batteries each / no 1 network printer hp jet 4240n network ready laser printer printing technology laser, inkjet brand hewlett packard connectivity technology usb printer output monochrome print media paper ( plain ) duplex no hardware interface usb 2.0 max printspeed monochrome 40 ppm item weight 60 pounds see less about this item up to 40 ppm letter print speed 1200 dpi resolution 460 mhz processor / 64 mb ram memory up to 512 mb ram via two industry standard 100 pin ddr dimm slots 58.00 lbs ( wxlxh ) 23.60 x 19.70 x 21.30 each / no 1 7.networking for 20 nodes cat6 utp cable ( box of 305 mtrs ) , 24 port ethernet networking switch – sr224 cisco, i / o with smb, jack panel – 24 ports cat6 patch cable ( 3 mts ) , rj 45 connectors, 1” flexible pipe per runnining mtr, 2” flexible pipe per running mts, networking rack each / no 1 8.air conditioners for labs centralized ac with duct system each / no 1 projector mativeresolution:xga 1024 x 768 brightness:3700 lumes lamp life: upto 10, 000hrs contrast ratio:16, 000:1 video compataibility:ntsc, pal hdmi:720p, 576p, 576i, 480p, 480i, 1080i, 1080p audio:audio out connector support with 16w audio output zoom focus:manual display input:vgax2 , hdmi x 2 , usb, composit av , mhl, wifi aspect ratio:4:3 and 16:9 remote :full function connectivity hdmi / vga, mhl, wifi each / no 1 2.analog and digital electronics lab / microcontroller lab arm / 7tdmi / lpc2148 kit including all interface and accessoreies arm / 7tdmi / lpc2148 kit including all interface and accessoreies each / no 1 patch cords patch cords each / no 1 cro probes cro probes each / no 1 pcb spring board pcb spring board each / no 1 ics: ics: 555 ua741, 7400, 7402, 7404, 74138, 74151 7490, 7495, 7486, 7410, 7420, 7408, 7432, 7410, 7490, 7476 each / no 1 resistors: 100k, 10 k, 1k, 270 ω, 22k, 4.7 k, 15k, 7 k, 5k, 33 k, 6.8 k, 3.3 k, 2.2 k, 90 k, 470 ω, 8.2 k, 47 k, 1.8 k, 10 k , potentiometer 90k, 20k resistors: 100k, 10 k, 1k, 270 ω, 22k, 4.7 k, 15k, 7 k, 5k, 33 k, 6.8 k, 3.3 k, 2.2 k, 90 k, 470 ω, 8.2 k, 47 k, 1.8 k, 10 k , potentiometer 90k, 20k each / no 1 capacitor:1 uf, 0.47 uf, 0.01 uf, 0.1 uf, dc supply: +5 volts 1a, ±12 volts 500 ma socket: 5 nos 16 / 20 pin zif socket bread board: 1 nos 680 tie points logic i / p: 16 nos toggle switches for inputs logic o / p: 16 nos high bright leds for outputs ttl clock: 1hz, 10hz, 100hz, 1 khz, 10 khz display: 2 nos 7segment display mono pulse: 1 hi & 1 low pulse terminals: 4mm bt 15 terminals each / no 1 ups and batteries 10 kva – ups10 kva ups • type: online single phase input & single phase output • capacity : 10kva • backup time: 4 hours or higher • input frequency: 50hz.+ / 5% • input voltage : 160v 270v • output voltage:230v+ / 1%v • output frequency : 50hz+ / 0.2hz. • input power factor: >0.9 • output power factor: 0.8 lag to unity • pf waveform: pure sine wave • alarm: on battery, low battery, ups over load • no. of batteries: compatible • dc voltage ( input ) :compatible • overload capacity : 150% for 1minute , 125% for 10minutes • inverter efficiency : 90% • overall efficiency: 90% • crest factor: 3:01 • regulation: + / 1% • switching frequency : above 20khz • technology: igbt based pwm technology with isolation transformer • warranty : 3 years onsite comprehensive including batteries • protection: automatic discharge protection with self test features, overload surge protection , input fault, cold start, low battery , battery over charge, output short circuit, charging current circuit, inverter over temperature • lcd display : output voltage, output current, load%, output frequency, input voltage, battery voltage • load test: at 100% load on resistive load thd: <3% for linear, <5% for non linear • certification: iso 9001:2008 or higher, etdc / cpri test report &bis certification each / no 1 150 kvh batteries exide make 12v 150 / 200 ah smf batteries each / no 1 computer lab projector mativeresolution:xga 1024 x 768 brightness:3700 lumes lamp life: upto 10, 000hrs contrast ratio:16, 000:1 video compataibility:ntsc, pal hdmi:720p, 576p, 576i, 480p, 480i, 1080i, 1080p audio:audio out connector support with 16w audio output zoom focus:manual display input:vgax2 , hdmi x 2 , usb, composit av , mhl, wifi aspect ratio:4:3 and 16:9 remote :full function connectivity hdmi / vga, mhl, wifi each / no 1 staff hp laserjet configuration black and white, print, copy, scan , 1 hi speed usb 2.0 , laser, a4 black and white laser, multifunction printer, perfect for enterprise, print, copy and scan, print speed up to 21 ppm ( black ) preinstalled introductory hp laserjet black cartridge ( ~700 pages ) installation guide, getting started guide, users guide, support flyer, warranty guide printer software and documentation on cd power cord , usb cable each / no 1 department and staff laptop computers:7thgeneration corei5 / i7, 8gb ram, 1tb hdd, 2gb graphics, 23.8 fhd windows 10 all in one desktop pc with wi fi enabled each / no 1 c programming laboratory computers ( wi fi enabled ) computers:7thgeneration corei5 / i7, 8gb ram, 1tb hdd, 2gb graphics, 23.8 fhd windows 10 all in one desktop pc with wi fi enabled each / no 1 computer network laboratory / mobile application developmen / artificial intelligence and machine learning laboratory server computer higher end specifications each / no 1 printers : hp laserjet printers a4 size hp laserjet configuration black and white, print, copy, scan , 1 hi speed usb 2.0 , laser, a4 black and white laser, multifunction printer, perfect for enterprise, print, copy and scan, print speed up to 21 ppm ( black ) preinstalled introductory hp laserjet black cartridge ( ~700 pages ) installation guide, getting started guide, users guide, support flyer, warranty guide printer software and documentation on cd power cord , usb cable each / no 1 ups and batteries 10 kva – ups10 kva ups • type: online single phase input & single phase output • capacity : 10kva • backup time: 4 hours or higher • input frequency: 50hz.+ / 5% • input voltage : 160v 270v • output voltage:230v+ / 1%v • output frequency : 50hz+ / 0.2hz. • input power factor: >0.9 • output power factor: 0.8 lag to unity • pf waveform: pure sine wave • alarm: on battery, low battery, ups over load • no. of batteries: compatible • dc voltage ( input ) :compatible • overload capacity : 150% for 1minute , 125% for 10minutes • inverter efficiency : 90% • overall efficiency: 90% • crest factor: 3:01 • regulation: + / 1% • switching frequency : above 20khz • technology: igbt based pwm technology with isolation transformer • warranty : 3 years onsite comprehensive including batteries • protection: automatic discharge protection with self test features, overload surge protection , input fault, cold start, low battery , battery over charge, output short circuit, charging current circuit, inverter over temperature • lcd display : output voltage, output current, load%, output frequency, input voltage, battery voltage • load test: at 100% load on resistive load thd: <3% for linear, <5% for non linear • certification: iso 9001:2008 or higher, etdc / cpri test report &bis certification each / no 1 batteries rack 25 batteries each / no 1 network printer hp jet 4240n network ready laser printer printing technology laser, inkjet brand hewlett packard connectivity technology usb printer output monochrome print media paper ( plain ) duplex no hardware interface usb 2.0 max printspeed monochrome 40 ppm item weight 60 pounds see less about this item up to 40 ppm letter print speed 1200 dpi resolution 460 mhz processor / 64 mb ram memory up to 512 mb ram via two industry standard 100 pin ddr dimm slots 58.00 lbs ( wxlxh ) 23.60 x 19.70 x 21.30 each / no 1 networking for 20 nodes cat6 utp cable ( box of 305 mtrs ) , 24 port ethernet networking switch – sr224 cisco, i / o with smb, jack panel – 24 ports cat6 patch cable ( 3 mts ) , rj 45 connectors, 1” flexible pipe per runnining mtr, 2” flexible pipe per running mts, networking rack each / no 1 air conditioners for labs centralized ac with duct system each / no 1 projector mativeresolution:xga 1024 x 768 brightness:3700 lumes lamp life: upto 10, 000hrs contrast ratio:16, 000:1 video compataibility:ntsc, pal hdmi:720p, 576p, 576i, 480p, 480i, 1080i, 1080p audio:audio out connector support with 16w audio output zoom focus:manual display input:vgax2 , hdmi x 2 , usb, composit av , mhl, wifi aspect ratio:4:3 and 16:9 remote :full function connectivity hdmi / vga, mhl, wifi each / no 1 28 department of mechanical and smart manufacturing 1.metallurgical inverted microscope • type of product co axial research metallurgical microscope vision plus • magnification 40x–1000x • illumination incident light through epi – illuminator with field aperture diaphragm and filter slots. continuously variable luminosity control through built in electronic transformer. • focusing co–axial focusing module with slides travelling on bearing guide ways. • optical tube binocular • eye pieces quadruple revolving nosepiece for quick magnification change with positive click stops for proper centering. compensating high eye point wide field eyepiece 10x. • stages large graduated mechanical stage with low drive co – axial controls for x–y movements on the ball slides. • objectives achromatic flat – field metallurgical corrected and anti mount fungus m5x, m10x, m45x, & m100x ( oil ) . • filters green & blue. • focusing: co–axial focusing module with slides each / no 1 2.fatigue test specification ft 200 max. bending moment ( kg. cm ) 200 bending moment adjustable ( kg.cm ) 25 200 ranges : 1 kg.cm ii kg.cm 25 125 125 200 gripping dia of specimen ( mm ) = 12 testing dia of specimen ( mm ) = 8 rotating speed in rpm =4200 accuracy of applied bending moment =±1% mechanical counter: no. of digits multiplying factor= 63 power required in hp 0.5 main supply 3ph 440v 50hz overall size ( mm ) 1000l x 500w x 600h weight ( kg ) 120 each / no 1 29 manufacturing process lab 1 foundry and forging laboratory iii sem 1 universal strength testing machine & attachments sand testing equipments each / no 1 2 shear strength attachments sand testing equipments each / no 1 3 tensile strength attachments sand testing equipments each / no 1 4 permeability tester sand testing equipments each / no 1 5 corehardness tester sand testing equipments each / no 1 6 mouldhardness tester sand testing equipments each / no 1 7 sieve analysis test setup sand testing equipments each / no 1 8 clay content tester sand testing equipments each / no 1 9 sanddrier sand testing equipments each / no 1 10 moisture content tester sand testing equipments each / no 1 11 clay washer along with the accessories each / no 1 12 sand rammer sand testing equipments each / no 1 13 flatteners 2 moulding tools each / no 1 14 tongs 18 moulding tools each / no 1 15 ball peen hammer tools used for foundry and forging each / no 1 16 cross peen hammer tools used for foundry and forging each / no 1 17 wooden log 18x 24 tools used for foundry and forging each / no 1 18 g i buckets 15 liters tools used for foundry and forging each / no 1 19 surface block 18x 18 tools used for foundry and forging each / no 1 20 centrifugal blower tools used for foundry and forging each / no 1 21 power hammer tools used for foundry and forging each / no 1 22 omega lpg fire hearth furnace chamber type, robust heavy duty construction, lined with high density ceramic fiber modules and blankets. gas ( png / lpg ) , automatic operation with auto ignition and flame monitoring system. sealing of the vertical lift doors and bogie through pneumatically operated soft seal clamps to ensure no ingress of cold air. thermal calibration as per api standards. each / no 1 23 coal fired smithy furnace both fire & ordinary brick size 3”x3”x5.9” gratingsfired ( two side fire each furnace ) , blower with kirloskar motor with starter ( 5hp, 2800rpm ) , interconnecting pipe reducer 3 inch pipe each / no 1 24 mini cupola 5kgs, operating temp 1500 c, 6kw, 230volt / single phase, crucible, heating element: 80 / 20 nichrome wire, insulation: by brick or ceramic fibre each / no 1 25 first aid box safety tools each / no 1 26 aluminium melting furnace capacity 5 kgs, operating temp 1200 c, rating 4.5 kw, 230 volt / single phase crucible 5 kg, chamber: high alumina content grooved brick temperature control. heating each / no 1 27 empty metallic drums forging tools each / no 1 28 swage block 50kg castiron forging tools each / no 1 29 anvil 50kg castiron forging tools each / no 1 30 anvil 100kg cast iron forging tools each / no 1 31 round tong, flat tong, square tong & bent tong forging tools each / no 1 32 swages top & bottom ¼“ms handle forging tools each / no 1 33 fuller top & bottom ¼“ ms handle forging tools each / no 1 34 hammer 2lb double headed forging tools each / no 1 35 sledge hammer 8lb wooden handle forging tools each / no 1 36 shovels moulding tools each / no 1 37 flatters forging tools each / no 1 38 set hammers ¼“ ms handle forging tools each / no 1 39 poker forging tools each / no 1 40 hot chisel ¼“ ms handle forging tools each / no 1 41 cold chisel l¼“ mshandle forging tools each / no 1 42 punches ½ round forging tools each / no 1 43 punches ½ square forging tools each / no 1 44 green sand ( bentonite & coal dust mixed ) moulding tools each / no 1 45 silica sand ( bentonite & coal dust mixed ) moulding tools each / no 1 46 bentonite powder moulding tools each / no 1 47 coal dust moulding tools each / no 1 48 tool kit gi box: ( peen & round rammer, rectangular trowel, smoother 4, leaf trowel big & small, lifter, ventwire, sprue pin, cleaner, divider 6”, drawspike, steelrule ( 300mm ) forging tools each / no 1 49 moulding boxes ( 12”x12”x4” ) cope drag ms forging tools each / no 1 50 teak wood leveller ( 18”x2”x1½” ) forging tools each / no 1 51 dumble split pattern 9”x3” ( aluminium ) forging tools each / no 1 52 single piece pattern step pulley ( aluminium ) forging tools each / no 1 53 split pattern groove pulley ( aluminium ) forging tools each / no 1 54 shovel standard size forging tools each / no 1 55 match plate pattern 9”octogonal block forging tools each / no 1 56 pelton wheel cup ( aluminium ) forging tools each / no 1 57 bellow 1’ forging tools each / no 1 58 pentagonal block self cored ( aluminium ) forging tools each / no 1 59 hexagonal block self cored ( aluminium ) forging tools each / no 1 60 core box split ( 6”x4”x4”, 40mmhole ) aluminium forging tools each / no 1 61 crucible ( graphite 20kg capacity ) forging tools each / no 1 62 abc core oil forging tools each / no 1 63 steel rule forging tools each / no 1 30.manufacturing process lab ii – iv sem 1 tool and cutter grinder with attachments tool and cutter grinder: with all necessary attachments to grind all types of metals 1hp 3 phase 2800 rpm bench grinder with grinding wheels size 10” x 1, 2 no. wheel ( one fine & one coarse ) fitted with wheel guard, tool rest. working surface of table 500 x 225 mm. table travel 525 x 250. magnet chuck suitable 200 x 450 mm. max. distance center of spindle to table 340 mm. vertical down feed on hand wheel 0.01mm. micro feed ( elevation ) 0.02 / 1 div. wheel speed 2800 rpm. wheel dimension grinding 178 x 31.75 x 12.7 mm. spindle motor 3 phase 1 hp each / no 1 2 horizontal milling machine with complete accessories. accessories include with above machine: 1 hp 1440 rpm 3 phase electric motor : 1 no. r / f switch, v belt & fittings : 1 no. coolant pump & fittings : 1 no. vertical attachment : 1 no. foundation rubber pad : 4 nos. oil – can : 1 no. allen key set : 1 no. spanner set each / no 1 3 radial drilling machine radial drilling machine: with complete accessories radial drilling machine: heavy duty radial drilling machine 25mm cap / 8 speed / 200mm travel with fine feed attachment. accessories include with above machine: 1 hp 1440 rpm 3 phase ele. motor for drilling : 01no 150mm capacity drill vice : 01no 0.5 hp 1440 rpm 3 phase ele. motor for lifting : 01no drill bit 12 mm capacity : 01no r / f switch : 02nos box table : 01no v belt with fitting : 02nos oil can : 01no ½” capacity drill chuck : 01no allen key set : 01no drift key : 01no mt 2 arbour : 01no mt 2 / 3 drill sleeve : 01no rubber pad for foundation : 04no each / no 1 4 heavy duty drilling machine heavy duty drilling machine: with complete accessories pillar drilling machines 25mm cap / 8 speed / 152mm travel with fine feed – square model accessories included with machine : 1 hp 1440 rpm 3 phase electric motor : 1 no. r / f switch, v belt & fitting : 1 no. 1⁄2” drill chuck : 1 no. foundation rubber pad : 4 nos. 4” drill vice : 1 no. oil – can : 1 no. allen key set : 1 no. spanner set : 1 no. mt 2 arbour : 1 no. 2 / 3 sleeves : 1 no. drill bit 12 mm : 1 no. each / no 1 5 high speed lathe high speed lathe: with complete accessories high precision light duty lathe machine with all standard accessories such as chuck plate, gear set, center adaptor, dead center, square tool post, tool post key with hardened bed. specifications: length of bed : 4 1⁄2’ height of centre : 165 mm. width of bed. : 238 mm. spindle hollow : 40 mm. admit between centres’s. : 650 mm accessories for the lathe machine 1. 1hp motor : 1 no 2. r / f switch v belt and fittings : 1 no each / no 1 6 surface grinding machine surface grinding machine with complete accessories size 7” x 14”, oil type surface grinder machine complete with 1 hp. electric motor, 6” x 12” magnetic chuck, starter, wheel balancer, one diamond dresser each / no 1 7 power saw power saw : ( rolex 10 cap hilton ) each / no 1 8 rack driven planning machine rack driven planning machine: with complete accessories each / no 1 9 shaping machine shaping machine : with complete accessories ( 24” / 18” stroke ) shaping machine 12” stroke heavy duty cone pulley type shaping machine fitted with motor pulley, handle, ram back accessories included with the above machine: 1 hp 1440 rpm 3 phase electric motor : 1 no. 0.5 hp 1440 rpm 3 phase electric motor : 1 no starter, v belt & fitting : 2 no. shaping m / c vice : 1 no. oil lubrication system : 1 no. foundation rubber pad : 8 nos each / no 1 10 belt driven slotting machine belt driven slotting machine: with complete accessories each / no 1 31.elements of mechanical engineering 1 cut sectional working model of 2 stroke petrol engine 2 stroke, single cylinder petrol engine test rig with mechanical loading air cooled. description • engine : bajaj • horse power : 1.5 hp. • rated speed : 900 rpm with gear ratio • cooling : air cooled • loading : by rope brake drum with 2 spring balances. • starting : kick start • speed measurement : by digital rpm indicator with proximity sensor • air flow measurement : by air box , orifice with transparent acrylic manometer • fuel measurement : by pipette and stop clock • temperature measurement : by digital temperature indicator with eight way channel selector • engine frame : mounted on anti vibration mounts. • instrumentation : mounted on separate control panel. • calorimeter type ( optional ) : shell and tube type each / no 1 2 cut sectional working model of 4 stroke petrol engine 4 stroke, single cylinder, petrol engine test rig panel a well designed and supported by a good quality painted rigid m.s. structure consists of • speed measurement : by digital rpm indicator with proximity sensor • water flow measurement : by water meter. • air flow measurement : by orifice in air box & transparent acrylic manometer air tank fitted with orifice and water manometer • fuel measurement : by fuel pipette & stop clock fuel measuring system consists of a fuel tank, a burette and a three way cock. • temperature measurement : by digital temperature indicator with eight way channel selector • engine frame : mounted on anti vibration mounts • instrumentation : mounted on separate control panel. • exhaust gas calorimeter : shell and tube type ( optional ) each / no 1 3 francis turbine model description • rotor : 150 mm diameter, 8 blades, gun metal. / c.i • volute casing : c.i. • guide vanes : 8 nos, with mechanism to change vane angle. • loading : alternator, 2 3 kva, standard make ( lamp loading, 10 nos, 200 w ) . • operating head : 10 15 m. • monoblock pump : standard make, 7.5 hp. • discharge measurement : 4 inch, coated m.s • tanks ( s.s ) : sump tank 880 ltrs. capacity • starter : standard make. • digital speed indicator : with proximity sensor for rpm measurement. • pressure gauge : 2 nos. • vaccum gauge : 1no., 0 760 mm of hg • energy meter : for output measurement, standard make. • controlling valves : 4 inch, butterfly valve. • supply : 3 ph, 440 v, 32 amps to be provided by user. • separate control panel : wooden sheet & square tubes. all these are mounted on sturdy frame of m.s. channel & angle. experimental capabilities • to obtain constant head and constant speed characteristics. • to obtain run away speed and unit head –unit quantities. note: specifications are subjected to change without prior information due to continuous design and development. each / no 1 4 pelton wheel turbine model description • rotor : 250 mm diameter, 20 cups, aluminium • output : 1.5 hp at 1000rpm • sphere valve assembly : s.s, 20 mm jet. • loading : rope brake drum, 350 mm diameter. spring balance of 0 10 kg. • operating head : 30 50 m • monoblock pump : 5 hp, two stage standard make. • tanks ( s.s ) : sump tank 250 ltrs. capacity • starter : standard make with indicator. • digital speed indicator : with proximity sensor, for rpm measurement. • pressure gauge : 2 nos. • discharge measurement : 2” venturimeter, coated m.s • controlling valves : 1 no, wheel valve • supply : 3 ph, 440 v, 32 amps to be provided by user. • separate control panel : wooden sheet & square tubes all these are mounted on sturdy frame of m.s. channel & angle. experimental capabilities • to evaluate the constant speed and constant head characteristics and also to plot unit quantities. note: specifications are subjected to change without prior information due to continuous design and development. each / no 1 5 kaplan turbine modeldescription • rotor : 150 mm diameter, 4 blades, gun metal / c.i. with angle changing mechanism. • out put : 1.5 hp @ 900 rpm. • volute casing : c.i. • loading : alternator, standard make, 2 3 kva, ( lamp loading, 10 nos, 200 w ) . • operating head : 5 10 m. • monoblock pump : standard make, 10 hp. • tanks ( s.s ) : sump tank – 880 ltrs. capacity • starter : standard make with mcb, console switch and red indicator. • digital speed indicator : with proximity sensor for rpm measurement. • energy meter : for out put measurement, standard make. • discharge measurement : venturimeter or bend meter, s.s. • pressure gauge : 2 nos. • vacuum gauge : 1 no. 0 760 mm of hg • controlling valves : 6 inch, butterfly valve. • supply : 3 ph, 440 v, 32 amps to be provided by user. • separate control panel : wooden sheet & square tubes. all these are mounted on sturdy frame of m.s. channel & angle. experimental capabilities • to obtain constant head and constant speed characteristics. • to obtain run away speed and unit head –unit quantities. note: specifications are subjected to change without prior information due to continuous design and development. each / no 1 6 centrifugal pump actual cut section each / no 1 7 vapor compression refrigeration system demo model each / no 1 8 vapor absorption refrigeration system demo model each / no 1 9 gear box demonstration model each / no 1 10 demo model of open and cross belt drives each / no 1 11 robot joints and links ( demo purpose ) each / no 1 12 air conditioning system ( demo model ) each / no 1 32.data structures lab equipments 1 desktop computer inspiron 24 5000 all in one desktop: 11th generation intel® core™ i3 1115g4 processor ( 6mb cache, up to 4.1 ghz ) , windows 10 home, english, intel® uhd graphics with shared graphics memory, 8gb, 8gbx1, ddr4, 2666mhz, 1tb 7200 rpm 2.5 sata hard drive, monitor 23.8 inch fhd ( 1920 x 1080 ) anti glare narrow border infinity non touch display, a frame stand, km636 wireless keyboard & mouse white, white fhd ir camera, intel® wi fi 6 2x2 ( gig+ ) and bluetooth 5.1, 90 watt ac adapter, power cord ( india ) each / no 1 2 operating system windows 7, 8, 8.1, 10, 11 pro each / no 1 3 software 1. eclipse: eclipse ide for c / c++ 2. turbo c: turbo c++ or c for windows 7, 8, 8.1 and 10 32 / 64 bit full screen 3. dev: dev c++ 4. codeblocks each / no 1 4 projector mativeresolution:xga 1024 x 768 brightness:3700 lumes lamp life: upto 10, 000hrs contrast ratio:16, 000:1 video compataibility:ntsc, pal hdmi:720p, 576p, 576i, 480p, 480i, 1080i, 1080p audio:audio out connector support with 16w audio output zoom focus:manual display input:vgax2 , hdmi x 2 , usb, composit av , mhl, wifi aspect ratio:4:3 and 16:9 remote :full function connectivity hdmi / vga, mhl, wifi . each / no 1 5 antivirus software: mcfee software epo ( 40 user ) each / no 1 6 projector screens good quality each / no 1 7 printers : hp laserjet printers a4 size hp laserjet configuration black and white, print, copy, scan , 1 hi speed usb 2.0 , laser, a4 black and white laser, multifunction printer, perfect for enterprise, print, copy and scan, print speed up to 21 ppm ( black ) preinstalled introductory hp laserjet black cartridge ( ~700 pages ) installation guide, getting started guide, users guide, support flyer, warranty guide printer software and documentation on cd power cord , usb cable each / no 1 8 ups and batteries 10 kva – ups 10 kva ups • type: online single phase input & single phase output • capacity : 10kva • backup time: 4 hours or higher • input frequency: 50hz.+ / 5% • input voltage : 160v 270v • output voltage:230v+ / 1%v • output frequency : 50hz+ / 0.2hz. • input power factor: >0.9 • output power factor: 0.8 lag to unity • pf waveform: pure sine wave • alarm: on battery, low battery, ups over load • no. of batteries: compatible • dc voltage ( input ) :compatible • overload capacity : 150% for 1minute , 125% for 10minutes • inverter efficiency : 90% • overall efficiency: 90% • crest factor: 3:01 • regulation: + / 1% • switching frequency : above 20khz • technology: igbt based pwm technology with isolation transformer • warranty : 3 years onsite comprehensive including batteries • protection: automatic discharge protection with self test features, overload surge protection , input fault, cold start, low battery , battery over charge, output short circuit, charging current circuit, inverter over temperature • lcd display : output voltage, output current, load%, output frequency, input voltage, battery voltage • load test: at 100% load on resistive load thd: <3% for linear, <5% for non linear • certification: iso 9001:2008 or higher, etdc / cpri test report &bis certification each / no 1 9 batteries rack capacity of 20 to 25 batteries each / no 1 10 laptop computer : 7th genration core i5 / i7, 8 gb ram, itb hod, 2gb graphics, 23.8 fhd windows 10 all in one desktop pc with wifi enabled each / no 1 33.computer aided machine drawing lab equipments 1 desktop computer inspiron 24 5000 all in one desktop: 11th generation intel® core™ i3 1115g4 processor ( 6mb cache, up to 4.1 ghz ) , windows 10 home, english, intel® uhd graphics with shared graphics memory, 8gb, 8gbx1, ddr4, 2666mhz, 1tb 7200 rpm 2.5 sata hard drive, monitor 23.8 inch fhd ( 1920 x 1080 ) anti glare narrow border infinity non touch display, a frame stand, km636 wireless keyboard & mouse white, white fhd ir camera, intel® wi fi 6 2x2 ( gig+ ) and bluetooth 5.1, 90 watt ac adapter, power cord ( india ) each / no 1 2 operating system windows 7, 8, 8.1, 10, 11 pro each / no 1 3 software solid edge software latest version ( 60 user license ) each / no 1 4 projector mativeresolution:xga 1024 x 768 brightness:3700 lumes lamp life: upto 10, 000hrs contrast ratio:16, 000:1 video compataibility:ntsc, pal hdmi:720p, 576p, 576i, 480p, 480i, 1080i, 1080p audio:audio out connector support with 16w audio output zoom focus:manual display input:vgax2 , hdmi x 2 , usb, composit av , mhl, wifi aspect ratio:4:3 and 16:9 remote :full function connectivity hdmi / vga, mhl, wifi each / no 1 5 antivirus software: mcfee software epo ( 40 user ) each / no 1 6 projector screens good quality each / no 1 7 printers : hp laserjet printers a4 size hp laserjet configuration black and white, print, copy, scan , 1 hi speed usb 2.0 , laser, a4 black and white laser, multifunction printer, perfect for enterprise, print, copy and scan, print speed up to 21 ppm ( black ) preinstalled introductory hp laserjet black cartridge ( ~700 pages ) installation guide, getting started guide, users guide, support flyer, warranty guide printer software and documentation on cd power cord , usb cable each / no 1 8 ups and batteries 10 kva – ups10 kva ups • type: online single phase input & single phase output • capacity : 10kva • backup time: 4 hours or higher • input frequency: 50hz.+ / 5% • input voltage : 160v 270v • output voltage:230v+ / 1%v • output frequency : 50hz+ / 0.2hz. • input power factor: >0.9 • output power factor: 0.8 lag to unity • pf waveform: pure sine wave • alarm: on battery, low battery, ups over load • no. of batteries: compatible • dc voltage ( input ) :compatible • overload capacity : 150% for 1minute , 125% for 10minutes • inverter efficiency : 90% • overall efficiency: 90% • crest factor: 3:01 • regulation: + / 1% • switching frequency : above 20khz • technology: igbt based pwm technology with isolation transformer • warranty : 3 years onsite comprehensive including batteries • protection: automatic discharge protection with self test features, overload surge protection , input fault, cold start, low battery , battery over charge, output short circuit, charging current circuit, inverter over temperature • lcd display : output voltage, output current, load%, output frequency, input voltage, battery voltage • load test: at 100% load on resistive load thd: <3% for linear, <5% for non linear • certification: iso 9001:2008 or higher, etdc / cpri test report &bis certification each / no 1 9 batteries rack capaeis of 20 to 25 batteries each / no 1 10 laptop computer : 7th genration core i5 / i7, 8 gb ram, itb hod, 2gb graphics, 23.8 fhd windows 10 all in one desktop pc with wifi enabled each / no 1 e & c departments each / no 1 1 regulated power supply dc regulated power supply with short circuit & overload protection 0 30 / 2a single out put with two digital meters. ar ps 302d dc regulated power supply with short circuit & over load protection 0 30v / 2a dual output with two digital meters each / no 1 2 bread board bread board with terminals mounted on plate each / no 1 3 decade boxes plastic switches decade resistance box with 6 dials ( 1 ohms to 1 m ohms ) each / no 1 4 decade capacitance box with 6 dials ( 10pfd to 100pfd, 100pfd to 0.001ufd, 0.001ufd to 0.01ufd to 0.1ufd, .1ufd to 1ufd, 1ufd to 10ufd ) each / no 1 5 decade inductance box with 6 dials ( 10uh to 100uh, 100uh to 1mh, 1mh to 10mh, 10mh to100mh, 100h to 1h, 1h to 10h ) each / no 1 6 lcr meters handheld lcr meter each / no 1 7 signal enerator generator 0.2hz to 2mhz microcontroller based signal generator with lcd display for frequency & amplitude read out int / ext ( ext upto 3mhz counter ) sine / square / triangle and puse with variable duty cycle amplitude 2mv 20vpp with 40db attenuation. each / no 1 8 digital storage oscilloscope 100mhz digital storage oscilloscope features: signal bandwidth : 100 mhz real time sampling:max 1 gsa / s equivalent sampling rate: max 50 gsa / s 7.0 tft lcd color display 2 mpts memory depth each / no 1 9 desk top digital meters ac voltmeter single range each / no 1 10 dc voltmeter single range each / no 1 11 ac ammeter single range each / no 1 12 dc ammeter single range each / no 1 13 digital storage oscilloscope 100mhz digital storage oscilloscope features: signal bandwidth : 100 mhz real time sampling:max 1 gsa / s equivalent sampling rate: max 50 gsa / s 7.0 tft lcd color display 2 mpts memory depth each / no 1 14 scr kit a ) variable dc power supply 3v to 30v @ 500ma to vary vak b ) variable dc power supply 1.5v to 15v @ 100ma to vary ig c ) 10watts fixed resistor rg for gate current d ) 50watts variable resistance for load current variation e ) 2 scr’s of different ratings to find different holding and latching current f ) digital dc milliammeter for gate current ig g ) digital dc ammeter for load current il. h ) digital dc voltmeter for vak i ) 230v ac mains operated j ) unit enclosed in a powder coated ms box with screen printed polycarbonate panel each / no 1 15 scr controlled hwr and fwr using rc triggering circuit kit a ) 20v @ 0.5a ac supply b ) 10a / 600v scr with heat sink and snubber circuit c ) potentiometer, fixed resistor, capacitor and associated components to build r and r c triggering circuit d ) single phase diode bridge rectifier for full wave controlled rectifier e ) 25 watts resistive load f ) 230v ac mains operated g ) unit enclosed in a powder coated ms box with screen printed polycarbonate panel. each / no 1 16 measurement of resistance using wheatstone and kelvin’s bridge kitw heatstone bridge a ) dc power supply – 5v@1a b ) mr 100 sensitive galvanometer c ) the series arm consists of 10x1, 10x10, 10x100, 10x1000 ohms d ) the ratio arm consists of rotary switch of 7 multiplying factors of 0.001, 0.01, 0.1, 1, 10, 100 and 1000. e ) 230v ac mains operated kelvins double bridge: a ) dc power supply 5v@2a b ) mr 100 sensitive galvanometer c ) the double ratio arm consists of rotary switch of 5 multiplying factors of 0.01, 0.1, 1, 10 and 100 d ) 10 coils of 0.1 ohm resistors connected in a rotary switch in series with circular slide wire of 100 divisions to vary r e ) terminals are connect 4 terminal unknown resistor f ) 230v ac mains operated each / no 1 17 characteristics of ldr & photo diode and turned on an led using ldr a ) variable dc power supply – 1.5v to 12v @ 250ma b ) digital dc voltmeter c ) digital dc milliammeter d ) ldr, photo diode, led, resistors and setup to vary the distance from ldr to lamp to vary light intensity on ldr e ) 230v ac mains operated each / no 1 18 measure temperature in terms of current / voltage using a temperature sensor bridge a ) temperature sensor –rtd ( pt 100 ) fitted on a heating element with thermometer for temperature measurement b ) digital voltmeter to measure temperature in terms of voltage c ) digital milli ammeter to measure temperature in terms of ma d ) temperature sensor bridge with associated components e ) 230v ac mains operated each / no 1 19 cro probes each / no 1 20 digital ic trainers with built in power supply digital ic trainer with built in power supply 10 logical i / p switches 10 logical o / p indicators 20 pin zif socket 5 os.bcd to seven segment display 2 nos. mono pulse generator frequency generator 1hz to 1mhz. bread oard 1 no. ( 165 x 50mm ) power supply + / 5v, + / 15v 4mm rminals with high quality patch cords. each / no 1 21 patch cord 4 mm each / no 1 22 ic tester minmax make microprocessor based analog & digital ic tester for testing analog ics upto 20 pins and digital ics upto 40 pins with 24 keys keyboard and 16 x 2 lcd alphanumeric display. model mme adit 40. each / no 1 23 microcontroll er kit on chip 64kb flash program memory.  1792 bytes expanded ram ( xram ) .  2048 bytes eerom.  spi interface.  16 bit programmable counter array for compare, capture, pwm.  three programmable timer / counters.  two external interrupts  one 26 pin frc to connect to some als standard nifc interfaces  the atmel at89c51ed2 8 bit micro controller with operating frequency of 11.0592mhz with an external crystal and supply voltage of +5v.  four 10 pin frc connectors connected to port 0 to port 3 of controller  a 9 pin d type female connector used for rs232 serial i / o interface for uart experiments and also for flash programming. serial interface through usb is also provided onboard each / no 1 24  a 9 pin d type male connector meant for power connection ( +5v and gnd ) .  a push button switch for reset and a slide switch to select either program mode or run mode.  a push button switch for external interrupt / int0 or / int1.  alphanumeric 16x2 lcd display.  two numbers of leds provided for general purpose.  16 switches organized as 4 rows x 4 columns.  8 bit dac interface  rtc interface  one adc ( adc0809 ) with a potentiometer to vary analog input & temperature sensor ic lm335  four level elevator simulator interface.  traffic light simulator interface  on board stepper motor and dc motor control interface. stepper motor and dc motor is supplied with evaluation board.  four digit multiplexed 7 segment display interface.  elegant enclosure with test points for monitoring each / no 1 25 bread board bread board with terminals mounted on plate each / no 1 26 microcontrol ler based signal generator 0.2hz to 2mhz microcontroller based signal generator with lcd display for frequency & amplitude read out int / ext ( ext upto 3mhz counter ) sine / square / triangle and puse with variable duty cycle amplitude 2mv 20vpp with 40db attenuation each / no 1 27 digital storage oscilloscope 100mhz digital storage oscilloscope features: signal bandwidth : 100 mhz real time sampling:max 1 gsa / s equivalent sampling rate: max 50 gsa / s 7.0 tft lcd color display each / no 1 28 variable power supply dc regulated power supply with short circuit & over load protection 0 30v / 2a dual output with two digital meters. each / no 1 29 linear ic tester microprocessor based analog & digital ic tester for testing analog ics upto 20 pins and digital ics upto 40 pins with 24 keys keyboard and 16 x 2 lcd alphanumeric display. model mme adit 40 each / no 1 30 lcr meters handheld lcr meter each / no 1 31 decade boxes plastic switches decade resistance box with 6 dials ( 1 ohms to 1 m ohms ) each / no 1 32 decade capacitance box with 6 dials ( 10pfd to 100pfd, 100pfd to 0.001ufd, 0.001ufd to 0.01ufd to 0.1ufd, .1ufd to 1ufd, 1ufd to 10ufd ) each / no 1 33 decade inductance box with 6 dials ( 10uh to 100uh, 100uh to 1mh, 1mh to 10mh, 10mh to100mh, 100h to 1h, 1h to 10h ) each / no 1 34 digital multimeter 3 ½ digit digital multimeter each / no 1 35 linear ic trainers 16 pin zif sockets 2 nos. built in function generator 1hz to 100khz sine wave with variable amplitude & square wave. built in power supply ( +5v 1a, + / 15v 200ma, 0 to + / 15v 350ma, 24v, 200ma ) with metal box enclosure. variable input source 0 to + / 12v, 0 to + / 1.2v. 4mm sockets with patch cords. bread board ( 165 x 50mm ) 1no. potentiometers 3 nos. a / c source 6 0 6 regulators 7805, 7905, lm317 extra 20 terminals. 20 patch chords each / no 1 36 dsp starter kit tms320c6748 with emulator the tms320c6748 dsp development kit ( lcdk ) is a scalable platform that breaks down development barriers for applications that require embedded analytics and real time signal processing, including biometric analytics, communications and audio. the low cost lcdk will also speed and ease your hardware development of real time dsp applications. hardware features processor  ti tms320c6748 dsp application processor  456 mhz c674x fixed / floating point dsp  on chip rtc memory  128m byte ddr2 sdram running at 150mhz  128 m byte 16 bit wide nand flash  1 micro sd / mmc slot interfaces  one mini usb serial port ( on board serial to usb )  one fast ethernet port ( 10 / 100 mbps ) with status leds  one usb host port ( usb 1.1 )  one mini usb otg port ( usb 2.0 )  one sata port ( 3gbps )  one vga port ( 15 pin d sub )  one lcd port ( beagleboard xm connectros )  one composite video input ( rca jack )  one leoprd imaging camera sensor input ( 36 pin zip connector )  three audio ports ( 1 line in & 1 line out & 1 mic in )  14 pin j tag header ( no onboard emulator, external emulator is required ) kit contents  c6748 lcdk kit  power adaptor  xds 100 / 110 jtag emulator  usb cable  user manual  code composer studio ( e download ) each / no 1 37 fpga trainer kit 32 inputs using 8 way four dip switches. each input of these switches has an led indication. 32 outputs through output ports of fpga connected to leds. 16x2 alpha–numeric lcd display with back light through 10 pin frc connectors to fpga / cpld port pins. six digit 7 segment displays connected through 10 pin frc connector to fpga / cpld port pin. 4x4 key matrix. 10 mhz, 5 mhz, 1mhz, 500 khz, 100 khz five different clock frequencies. on board relay connected using 10 pin frc to fpga / cpld port pins. on board traffic light simulator connected to fpga / cpld port pins using 16 pin frc. on board adc connected to fpga / cpld port pins using 16 pin frc. on board dac is provided to generate different waveforms and it is connected to fpga / cpld port pins using 16 pin frc. on board four level elevator connected to fpga / cpld port pins using 16 pin frc. two pin reliamate is provided on the board to connect external dc motor and it is connected to fpga / cpld port pins using 10 pin frc. 5 way powermate is provided to connect external stepper motor and it is connected to fpga / cpld port pins using 10 pin frc. 26 pin frc header with cable for connecting to als standard interfaces. 8 inputs using 0ne dip switches. each input of these switches has an led indication. one push button four sets of 20x2 female berg connector to plug the daughter board. programs can be downloaded from the pc to the fpga / cpld on the daughter board using programming tool. each / no 1 38 daughter board 6 xlinix xc6slx4tq144: spartan6 fpga platform flash in system programmable configuration prom: xcf04svo20 16 pin frc connector to select between base board toggle switch and the 26 pin frc external interface. jtag connector ( 10 pin frc connector ) for boundary scan programming. push button switch to re initialize the fpga and done led for program status indication power from the bottom board. four sets of 20 x 2 berg connectors for plugging on to the base board. each / no 1 39 bit pattern logic analyzer cpld 32 bit pattern generator and logic analyzer each / no 1 40 power supply ( 5v, 1.5a, + / 12v, 100ma ) each / no 1 41 lpc1768 is arm cortex m3 based micro controller with  512kb flash memory and 64kb sram in system programming ( isp ) and in application programming ( iap ) capabilities.  single 3.3 v power supply ( 2.4 v to 3.6 v ) .  70 general purpose i / o ( gpio ) pins with configurable pull up / down resistors, open drain mode, and repeater mode.  standard jtag test / debug interface as well as serial wire debug.  12mhz crystal allows easy communication setup  one on board voltage regulator for generating 3.3v. input to this will be from external +5v dc power supply through a 9 pin dsub connector  piggy back module containing lpc1768 controller  standard jtag connector with arm 2×10 pin layout for programming / debugging with arm jtag  reset push button for resetting the controller  one rs232 interface circuit with 9 pin dsub connector: this is used by the boot loader program, to program lpc1768 flash memory without external programmer. application program can also use this uart for serial communication  dc motor interface with direction and speed control  stepper motor interface with direction and speed control  16×2 alphanumeric lcd display  on chip adc interface circuit with pot  8 bit dac interface  4x4 key matrix connected to the port lines of the controller  one external interrupt circuit with led indication  two digit multiplexed 7 segment display interface  interface circuit for on board buzzer, relay and led indication controlled through push button.  spi interface: 2 channel adc ic with pot and temperature sensor  i2c interface: nvrom ic  internal pwm terminated in test point and led  standard 26 pin frc connectors to connect to on board interface. a number of software examples in ‘c language’ to illustrate the functioning of the interfaces. the software examples are compiled using an evaluation version of keil4 ‘c’ compiler for arm. each / no 1 42 ( 5v, 1.5a, + / 12v, 100ma ) each / no 1 43 frequency modulation and demodulation trainer kit  af generator – generates low frequency signals of 500 hz and 5 khz to use as a modulating signal.  regulated power supply – on board power supply provide +15v, 15v, +5v, 5v and current rating 150ma each.  modulation – frequency modulation using xr 2206 with frequency of operation can be selected externally over a range of 0.01hz to more than 1mhz.  demodulation – frequency demodulation using general purpose pll lm565. each / no 1 44 amplitude modulation and demodulation trainer kit  rf generator – colpitts oscillator generates, 1 mhz frequency to use as carrier signal  af generator – low frequency signal 2 khz is generated and used as the modulation signal  power supply – on board power supply provide +12v, 12v and current rating 150ma each  modulation – amplitude modulation using bc107 transistor ( npn )  demodulation – envelop detector using diode oa79. each / no 1 45 analog sampling and reconstruction trainer kit  onboard input sinusoidal signal: 2 khz.  sampling freq: 2 khz, 4 khz, 8 khz, 16 khz, 32 khz ( selectable )  variable duty cycle: 10% to 90% cut off freq: 3.4 khz.  outputs: sampling amplifier & sample hold amplifier  reconstruction: 2nd, 4th & 6th order butter worth lpf each / no 1 46 time division multiplexing and demultiplexin g trainer kit ( tdm ) with power supply  input sine waves: 2khz, 1khz, 500hz, 250 hz  synchronization pulse generation: using ( variable 0 5v ) dc level  generation of receiver clock and channel information using pll  communication through three, two and single wire modes  sampling rate: 32 khz  reconstruction: 4 order low pass butter worth filter cut off freq: 3.4 khz,  clock recovery & sync detect 2 of the fundamentals aspects using pll techniques each / no 1 47 psk / dpsk modulation and demodulation kit with power supply  data bits:8 bit rz variable data with sliding switch selection  carrier: on board 8 khz / 5v amplitude with 0 degree and 180 degree phase sine wave.  psk modulator: using ic cd4051 ( multiplexer )  psk demodulator: carrier phase comparison  differential encoder / decoder using ex or and ex nor logic  dpsk modulator: using ic cd4051 ( multiplexer ) dpsk demodulator: carrier phase modulation each / no 1 48 ask / fsk modulation and demodulation kit with power supply  data bits: variable data using sliding switch  carrier :onboard variable frequency and amplitude sine wave  bask modulator: using cd4066 ( bilateral switch  ask demodulator: using ic tl084 with low pass filter  we can see outputs in various test points  bfsk modulator: variable carrier frequency modulation  bfsk demodulator: using pll method for demodulation also we can see outputs in various test points each / no 1 49 measurement of frequency, guide wavelength, power , vswr and attenuation in microwave test bench klystron power supply  klystron mount with klystron tube  variable attenuator  frequency meter  slotted section  tunable probe  detector mount  isolator  waveguide stand ( 02 nos. )  bnc bnc cables ( 02 nos. )  cooling fan each / no 1 50 obtain the radiation pattern and measurement of directivity and fain of micro strip dipole and yagi antenna ( 1set )  yagi antenna  dipole antenna  antenna tripod stands ( transmitter and receiver )  microwave detector ( dc 3ghz )  signal generator 2.0 – 3.0ghz  vswr meter  coaxial matched loads – 50 ohms 03 nos.  short  adapter n ( m ) to sma ( f )  adapter sma ( f ) to sma ( f )  adapter sma ( m ) to sma ( m )  rf cable 1m length bnc cable each / no 1 51 determination of a ) coupling and isolation characteristics of microstrip directional coupler b ) resonance characteristics of microstrip ring resonator and computation of dielectric constant of the substrate c ) power division and isolation of microstrip power divider ( 1set )  ring resonator  power divider  branch line directional coupler  parallel coupled directional coupler  stripline directional coupler  microwave detector ( dc 3ghz )  signal generator 2.0 – 3.0ghz  vswr meter  coaxial matched loads – 50 ohms 03 nos.  short  attenuator pad 3db  attenuator pad 6db  attenuator pad 10db coaxial  adapter n ( m ) to sma ( f ) 02 nos.  adapter sma ( f ) to sma ( f ) 02 nos  adapter sma ( m ) to sma ( m )  bnc cable each / no 1 52 basic project lab tools & instruments soldering gun each / no 1 53 de soldering pump each / no 1 54 antistatic mat for 2” x 3” each / no 1 55 nose plair each / no 1 56 cutting plair each / no 1 57 sleeve remover each / no 1 58 digital multimeter 3 ½ digit each / no 1 59 bread board each / no 1 60 single stand wire ( 10mtr each / no 1 61 crocodile clip with patch cord each / no 1 62 solder lead each / no 1 63 dc regulated power supply with short circuit & over load protection 0 30v / 2a dual output with two digital meters each / no 1 64 hand held lcr meter each / no 1 65 mini projects assembled & tested a ) als stuprj1 smoke alarm b ) als stuprj2 heat alarm c ) als stuprj3 metal detector d ) als stuprj4 touch alarm e ) als stuprj8 light operated relay each / no 1 66 mini projects assembled & tested includes the following f ) als stuprj9 light dimmer g ) als stuprj10 water level controller h ) als stuprj11 door bell / moisture sensor i ) als stuprj13 police siren jals stuprj14 linear power supply each / no 1 67 adaptor each / no 1 68 project boards for embedded segment controller boards als pjt89c51ed2 ed2 project with proto board each / no 1 69 als pjt arm2148 arm project board with proto board each / no 1 70 als pjt fpga 01 fpga 3s400 project board with proto board each / no 1 71 als pjtbrd armctxm3 01 arm cortex m3 project board with proto board each / no 1 72 als pjt proto 01 proto board ( additional ) each / no 1 73 evaluation boards for study a ) als sda emb eval 03 embedded controller kit b ) power supply ( 5v, 1.5a, + / 12v, 100ma ) each / no 1 74 mini projects controller based als prj / proto / 01 relay project board als prj / proto / 02 nvrom project board als prj / proto / 03 spi adc project board each / no 1 75 als prj / proto / 01 relay project board als prj / proto / 02 nvrom project board als prj / proto / 03 spi adc project board each / no 1...

Indian Navy - Karnataka

31342186 procurement of electrical spares , procurement of electrical spares , 5 / 10 dia, led ( red / yellow / white / green ) , magazine light fitting ( 60w ) , mnx 13e , desk light decorative type with in built switch ( 20w ) , dimmer , 10a, 2pole, mcb , 63a, tp mcb , relays for drop in plate , 25 pin pcb serial , intercom system ( driver unit ) l8d 8308 m , incandescent light ftng wtrtight, marine wel glass ftng ( 60w ) , cctv cameras , 63a, 3pole, mcb , lamp holder , 6 / 16a socket 30828 , illuminated pb, red , 3 pole, 6a, on / off toggle switch , 24v dc buzzer , mnx a1 , mnx 32 coil voltage 240v ac with 3no+1no aux contacts , fuse type terminals with 1a fuse link glass type , 16 dia, led ( red ) , 6a, 2pole, mcb , hooter , extended rotary handle dm 100 extended , fuse3.15 a , hf fuse link 4a , fuse link 6a , junction box for tank & bilge level switches , mirror light ( 20w ) , lamp 24v / 40w , mccb 250a tp with 1 aux. with shunt trip , power factor 3ph, 3 wire, 1element415vac, size:96x96 , illuminated pb, green , illuminating push button, colour:red, 2nc element , indicating lamp, colour: green, input voltage: 240v ac, 50hz, le , 37 pin pcb system ip , 2 way water tight switch , fuse link 2a , mccb 50a , 15 pin pcb ao , 1 c / o relays , 2x18wfluorescent wtrtight, weatherprof tubelight ftg with grd , aldis lamp , 60w incandescent lamp , 20a hrc fuse base & carrier with 10a fuse link , indicating lamp colour: red, input voltage: 240v ac, 50hz, led , incandescent light ftg wtrtight bhd mount type with grd ( 60w ) , 1000w, remotly operated search light with control panel , 16a switches 21066 , optical smoke detector head sv, ip44d ( conduit box ) , hrc fuse, fuse link ( 4a ) , mccb 630a tp with1 aux. with sunt trip , mccb 100a , anchor light ( white ) , 125a hcos , hand changeover switch , ais gps antennaat575 68 ( 2gdb, tnc f ) , mccb 80a , mcb 3 pole 6a , power terminals suitable up to 70 sq.mm wire , mcb 3 pole 2a , power terminals suitable upto 4 sq.mm wire , led lamp ( green ) 12v dc , 240v ac, amber indicating lamp , mn 2 13 a to 19 a overload relay , mn 2 24 a to 32 a overload relay , sd timer 2asdt0 , led lamp ( red ) 12v dc , 16a, 2pole, mcb , 25a, 2pole, mcb , 2a, 1 way mcb, 2p , bulb ac 220v, 25 w , mcb 3 pole 10a , side light ( red ) , side light ( green ) ...

Nmdc Limited - Karnataka

30836827 bids are invited for starter for tube light , tube light rod 36/40w , choke/ballast for mh/hpsv lamp 250w , electronic choke for tube light , straight batten holder , slant batten holder , led down lighter 18/20w , led flood light 130w , led tube light fitting 18/20w , led streetlight 70/72w , capacitor 36/42 ufd , universal ignitor for 70/150/250/400w hpsv/mh lamp , led well glass fitting 35/40w , led high bay fitting 200w , led post top lantern12/15w , metal halide (mh) street light fitting 250w ,underwater multicolour led 10/15w , led long range floodlight cob type 150w , metal halide (mh) flood light fitting400w , metal halide (mh) lamp 250w , metal halide (mh)lamp 400w , incandescent lamp 50/100w , ledweatherproof signal blinker (red)boq title procurement of luminaries total quantity : 5860...

Public Works Department - Karnataka

30797840 the quotation called for rates to prepare estimate purposes of lab equipments & machinarys for government engineering college , ramanagara tender title 1 spring constant setup setup includes metal stand with 50cm scale fitted. soft springs 2nos. slotted weights of 5 pieces ( 50gm each ) 2 set. 2 stefan’s law setup includes 0 6v regulated power supply. filament bulb 6v. digital voltmeter and ammeter. 3 photo diode setup setup includes variable voltage sources ( 0 5 v and 0 15v ) . photodiode and bulb holding setup. 2mm / 3mm patch cards. 4 numerical aperture of an optical fiber setup setup includes laser source, 560nm, 5 mw. optical fiber cable, 1.5m length. movable fiber holding stand with scale fitted and screen. 5 di electric constant – expt setup setup includes a setup within built voltage source, 0 30 v digital voltmeter, digital stop clock, resistor, 3 capacitors with different capacitance value. 2 mm patch cords. 6 magnetic field intensity along the axis of a coil setup includes circular coil setup of 6” dia with a bridge along the axis of the coil fitted with scale. deflection magnetometer 4”, commutator. dc ammeter ( 0 5a ) , dc voltage source connecting wires. 7 forced oscillation study setup includes a modified pohl’s pendulum ( torsion pendulum, ) setup variable speed motor setup for forced oscillations. digital frequency meter. suitable power sources with connecting wires. 8 resistivity by four probe setup includes a four probe setup with oven ( 1500c ) . digital or analog thermometer. semiconductor and conductor samples ( each one ) suitable power sources with connecting wires. 2 computer science and engineering 1 c programming laboratory computers ( wi fi enabled ) computers:7thgeneration corei5 / i7, 8gb ram, 1tb hdd, 2gb graphics, 23.8 fhd windows 10 all in one desktop pc with wi fi enabled each / no 1 2 server computer higher end specifications each / no 1 3 laser printers hp laser jet pro m1210 multifunction printer series each / no 1 4 ups and batteries 10 kva – ups each / no 1 5 batteries rack capacity of 20 to 25 batteries each / no 1 6 network printer hp jet 4240n network ready laser printer each / no 1 7 networking for 20 nodes cat6 utp cable ( box of 305 mtrs ) , 24 port ethernet networking switch – sr224 cisco, i / o with smb, jack panel – 24 ports cat6 patch cable ( 3 mts ) , rj 45 connectors, 1” flexible pipe per runnining mtr, 2” flexible pipe per running mts, networking rack each / no 1 8 air conditioners for labs centralized ac with duct system each / no 1 9 projectors dell 1510x each / no 1 10 analog and digital electronics lab / microcontroller lab arm / 7tdmi / lpc2148 kit including all interface and accessoreies each / no 1 11 patch cords each / no 1 12 cro probes each / no 1 13 pcb spring board each / no 1 14 ics: 555 ua741, 7400, 7402, 7404, 74138, 74151 7490, 7495, 7486, 7410, 7420, 7408, 7432, 7410, 7490, 7476 each / no 1 15 resistors: 100k, 10 k, 1k, 270 ω, 22k, 4.7 k, 15k, 7 k, 5k, 33 k, 6.8 k, 3.3 k, 2.2 k, 90 k, 470 ω, 8.2 k, 47 k, 1.8 k, 10 k , potentiometer 90k, 20k each / no 1 16 capacitor:1 uf, 0.47 uf, 0.01 uf, 0.1 uf, dc supply: +5 volts 1a, ±12 volts 500 ma socket: 5 nos 16 / 20 pin zif socket bread board: 1 nos 680 tie points logic i / p: 16 nos toggle switches for inputs logic o / p: 16 nos high bright leds for outputs ttl clock: 1hz, 10hz, 100hz, 1 khz, 10 khz display: 2 nos 7segment display mono pulse: 1 hi & 1 low pulse terminals: 4mm bt 15 terminals each / no 1 17 ups 15 kva online ups, dsp controlled, igbt, with lcd display 1 phase input output each / no 1 18 150 kvh batteries exide make 12v 150 / 200 ah smf batteries each / no 1 19 computer lab wall mounted projectors 3, 000 ansi lumens, resolution 1024x768 display type 0.55 dlp x 1 video modes 720p, 1080i, 1080p / 60, 1080p / 24 lamp type 190w metal halide bulb each / no 1 20 staff mfb lazer printers main input tray 150 sheets of regular weight print speed 14 a4 pages per minute ( ppm ) , 15 letter size ppm print resolution 600 x 600 dpi duty cycle 8, 000 single sided pages per month ( maximum ) each / no 1 21 department and staff laptop omputers:7thgeneration corei5 / i7, 8gb ram, 1tb hdd, 2gb graphics, 23.8 fhd windows 10 all in one desktop pc with wi fi enabled each / no 1 22 c programming laboratory computers ( wi fi enabled ) computers:7thgeneration corei5 / i7, 8gb ram, 1tb hdd, 2gb graphics, 23.8 fhd windows 10 all in one desktop pc with wi fi enabled each / no 1 23 computer network laboratory / mobile application developmen / artificial intelligence and machine learning laboratory server computer higher end specifications each / no 1 24 laser printers hp laser jet pro m1210 multifunction printer series each / no 1 25 ups and batteries 10 kva – ups each / no 1 26 batteries rack 25 batteries each / no 1 27 network printer hp jet 4240n network ready laser printer each / no 1 28 networking for 20 nodes cat6 utp cable ( box of 305 mtrs ) , 24 port ethernet networking switch – sr224 cisco, i / o with smb, jack panel – 24 ports cat6 patch cable ( 3 mts ) , rj 45 connectors, 1” flexible pipe per runnining mtr, 2” flexible pipe per running mts, networking rack each / no 1 29 air conditioners for labs centralized ac with duct system each / no 1 30 projectors dell 1510x each / no 1 3 e&c engineering department 1 regulated power supply 1. ar ps 302s dc regulated power supply with short circuit & overload protection 0 30 / 2a single out put with two digital meters. each / no 1 2. ar ps 302d dc regulated power supply with short circuit & over load protection 0 30v / 2a dual output with two digital meters each / no 1 2 bread board bread board with terminals mounted on plate each / no 1 3 spring board spring board with two 16 pin zif socketand 64 spcar springs. each / no 1 4 decade boxes plastic switches 1. decade resistance box with 6 dials ( 1 ohms to 1 m ohms ) each / no 1 2. decade capacitance box with 6 dials ( 10pfd to 100pfd, 100pfd to 0.001ufd, 0.001ufd to 0.01ufd to 0.1ufd, .1ufd to 1ufd, 1ufd to 10ufd ) each / no 1 3. decade inductance box with 6 dials ( 10uh to 100uh, 100uh to 1mh, 1mh to 10mh, 10mh to100mh, 100h to 1h, 1h to 10h ) each / no 1 5 lcr meters handheld lcr meter each / no 1 6 signal enerator generator phy 103far 0.2hz to 2mhz microcontroller based signal generator with lcd display for frequency & amplitude read out int / ext ( ext upto 3mhz counter ) sine / square / triangle and puse with variable duty cycle amplitude 2mv 20vpp with 40db attenuation. each / no 1 7 digital storage oscilloscope 100 mhz dso model :gds 1102 u ( 1 gs / s, 2 mega points mem each / no 1 8 desk top digital meters 1. ac voltmeter single range each / no 1 2. dc voltmeter single range each / no 1 3. ac ammeter single range each / no 1 4. dc ammeter single range each / no 1 9 analog oscilloscope scientific 30mhz dual trace oscilloscope each / no 1 10 scr kit a ) variable dc power supply 3v to 30v @ 500ma to vary vak b ) variable dc power supply 1.5v to 15v @ 100ma to vary ig c ) 10watts fixed resistor rg for gate current d ) 50watts variable resistance for load current variation e ) 2 scr’s of different ratings to find different holding and latching current f ) digital dc milliammeter for gate current ig g ) digital dc ammeter for load current il. h ) digital dc voltmeter for vak i ) 230v ac mains operated j ) unit enclosed in a powder coated ms box with screen printed polycarbonate panel each / no 1 11 scr controlled hwr and fwr using rc triggering circuit kit a ) 20v @ 0.5a ac supply b ) 10a / 600v scr with heat sink and snubber circuit c ) potentiometer, fixed resistor, capacitor and associated components to build r and r c triggering circuit d ) single phase diode bridge rectifier for full wave controlled rectifier e ) 25 watts resistive load f ) 230v ac mains operated g ) unit enclosed in a powder coated ms box with screen printed polycarbonate panel. each / no 1 12 measurement of resistance using wheatstone and kelvin’s bridge kit wheatstone bridge: a ) dc power supply – 5v@1a b ) mr 100 sensitive galvanometer c ) the series arm consists of 10x1, 10x10, 10x100, 10x1000 ohms d ) the ratio arm consists of rotary switch of 7 multiplying factors of 0.001, 0.01, 0.1, 1, 10, 100 and 1000. e ) 230v ac mains operated kelvins double bridge: a ) dc power supply 5v@2a b ) mr 100 sensitive galvanometer c ) the double ratio arm consists of rotary switch of 5 multiplying factors of 0.01, 0.1, 1, 10 and 100 d ) 10 coils of 0.1 ohm resistors connected in a rotary switch in series with circular slide wire of 100 divisions to vary r e ) terminals are connect 4 terminal unknown resistor f ) 230v ac mains operated each / no 1 13 characteristics of ldr & photo diode and turned on an led using ldr a ) variable dc power supply – 1.5v to 12v @ 250ma b ) digital dc voltmeter c ) digital dc milliammeter d ) ldr, photo diode, led, resistors and setup to vary the distance from ldr to lamp to vary light intensity on ldr e ) 230v ac mains operated each / no 1 14 measure temperature in terms of current / voltage using a temperature sensor bridge a ) temperature sensor –rtd ( pt 100 ) fitted on a heating element with thermometer for temperature measurement b ) digital voltmeter to measure temperature in terms of voltage c ) digital milli ammeter to measure temperature in terms of ma d ) temperature sensor bridge with associated components e ) 230v ac mains operated each / no 1 15 cro probes each / no 1 4 digital system design ( dsd ) lab 1 digital ic trainers with built in power supply digital ic trainer with built in power supply 10 logical i / p switches 10 logical o / p indicators 20 pin zif socket 5 os.bcd to seven segment display 2 nos. mono pulse generator frequency generator 1hz to 1mhz. bread oard 1 no. ( 165 x 50mm ) power supply + / 5v, + / 15v 4mm rminals with high quality patch cords. each / no 1 2 patch cord patch cord 4 mm each / no 1 3 ic tester minmax make microprocessor based analog & digital ic tester for testing analog ics upto 20 pins and digital ics upto 40 pins with 24 keys keyboard and 16 x 2 lcd alphanumeric display. model mme adit 40. each / no 1 5 microcontroller lab 1 microcontroller kit on chip 64kb flash program memory. 1792 bytes expanded ram ( xram ) . 2048 bytes eerom. spi interface. 16 bit programmable counter array for compare, capture, pwm. three programmable timer / counters. two external interrupts one 26 pin frc to connect to some als standard nifc interfaces the atmel at89c51ed2 8 bit micro controller with operating frequency of 11.0592mhz with an external crystal and supply voltage of +5v. four 10 pin frc connectors connected to port 0 to port 3 of controller a 9 pin d type female connector used for rs232 serial i / o interface for uart experiments and also for flash programming. serial interface through usb is also provided onboard a 9 pin d type male connector meant for power connection ( +5v and gnd ) . a push button switch for reset and a slide switch to select either program mode or run mode. a push button switch for external interrupt / int0 or / int1. alphanumeric 16x2 lcd display. each / no 1 two numbers of leds provided for general purpose. 16 switches organized as 4 rows x 4 columns. 8 bit dac interface rtc interface one adc ( adc0809 ) with a potentiometer to vary analog input & temperature sensor ic lm335 four level elevator simulator interface. traffic light simulator interface on board stepper motor and dc motor control interface. stepper motor and dc motor is supplied with evaluation board. four digit multiplexed 7 segment display interface. elegant enclosure with test points for monitoring 6 analog circuits lab 1 bread board bread board with terminals mounted on plate each / no 1 2 spring board spring board with two 16 pin zif socketand 64 spcar springs. each / no 1 3 microcontroller based signal generator phy 103far 0.2hz to 2mhz microcontroller based signal generator with lcd display for frequency & amplitude read out int / ext ( ext upto 3mhz counter ) sine / square / triangle and puse with variable duty cycle amplitude 2mv 20vpp with 40db attenuation each / no 1 4 digital storage oscilloscope 100 mhz dso model :gds 1102 u ( 1 gs / s, 2 mega points mem ) each / no 1 5 variable power supply ar ps 302d dc regulated power supply with short each / no 1 6 linear ic tester minmax make microprocessor based analog & digital ic tester for testing analog ics upto 20 pins and digital ics upto 40 pins with 24 keys keyboard and 16 x 2 lcd alphanumeric display. model mme adit 40 each / no 1 7 lcr meters handheld lcr meter each / no 1 8 decade boxes plastic switches 1.decade resistance box with 6 dials ( 1 ohms to 1 m ohms ) each / no 1 2. decade capacitance box with 6 dials ( 10pfd to 100pfd, 100pfd to 0.001ufd, 0.001ufd to 0.01ufd to 0.1ufd, .1ufd to 1ufd, 1ufd to 10ufd ) each / no 1 3. decade inductance box with 6 dials ( 10uh to 100uh, 100uh to 1mh, 1mh to 10mh, 10mh to100mh, 100h to 1h, 1h to 10h ) each / no 1 9 digital multimeter meco make each / no 1 10 linear ic trainers 16 pin zif sockets 2 nos. built in function generator 1hz to 100khz sine wave with variable amplitude & square wave. built in power supply ( +5v 1a, + / 15v 200ma, 0 to + / 15v 350ma, 24v, 200ma ) with metal box enclosure. variable input source 0 to + / 12v, 0 to + / 1.2v. 4mm sockets with patch cords. bread board ( 165 x 50mm ) 1no. potentiometers 3 nos. a / c source 6 0 6 regulators 7805, 7905, lm317 extra 20 terminals. 20 patch chords each / no 1 7 dsp lab 1 dsp starter kit tms320c6748 with emulator hardware the omap l138 c6000 dsp+arm processor is a low power applications processor based on an arm926ej s and a c674x dsp core. 456 mhz c6748 fixed / floating point dsp, on chip rtc, one mini usb serial port ( on board serial to usb ) , one fast ethernet port ( 10 / 100 mbps ) with status, leds, one usb host port ( usb 1.1 ) , one mini usb otg port ( usb 2.0 ) , one lcd port, two audio ports ( 1 line in & 1 line out ) , 14 pin jtag header, on board 128mb sdram and 128mb nand. software a complete integrated development environment ( ide ) , an efficient optimizing c / c++ compiler assembler, linker, debugger, an a advanced editor with code maestro™ technology for faster code creation, data visualization, a profiler and a flexible project manager dsp / bios™ real time kernel target error recovery software dsk diagnostic tool plug in ability for third party software for additional functionality. each / no 1 8 hdl lab 1 sda fpga 04 trainer sda fpga 04 trainer 32 inputs using 8 way four dip switches. each input of these switches has an led indication. 32 outputs through output ports of fpga connected to leds. 16x2 alpha–numeric lcd display with back light through 10 pin frc connectors to fpga / cpld port pins. six digit 7 segment displays connected through 10 pin frc connector to fpga / cpld port pin. 4x4 key matrix. 10 mhz, 5 mhz, 1mhz, 500 khz, 100 khz five different clock frequencies. on board relay connected using 10 pin frc to fpga / cpld port pins. on board traffic light simulator connected to fpga / cpld port pins using 16 pin frc. on board adc connected to fpga / cpld port pins using 16 pin frc. on board dac is provided to generate different waveforms and it is connected to fpga / cpld port pins using 16 pin frc. on board four level elevator connected to fpga / cpld port pins using 16 pin frc. two pin reliamate is provided on the board to connect external dc motor and it is connected to fpga / cpld port pins using 10 pin frc. 5 way powermate is provided to connect external stepper each / no 1 motor and it is connected to fpga / cpld port pins using 10 pin frc. 26 pin frc header with cable for connecting to als standard interfaces. 8 inputs using 0ne dip switches. each input of these switches has an led indication. one push button four sets of 20x2 female berg connector to plug the daughter board. programs can be downloaded from the pc to the fpga / cpld on the daughter board using programming tool. 2 daughter board 6 xlinix xc6slx4tq144: spartan6 fpga platform flash in system programmable configuration prom: xcf04svo20 16 pin frc connector to select between base board toggle switch and the 26 pin frc external interface. jtag connector ( 10 pin frc connector ) for boundary scan programming. push button switch to re initialize the fpga and done led for program status indication power from the bottom board. four sets of 20 x 2 berg connectors for plugging on to the base board. each / no 1 3 bit pattern logic analyzer cpld 32 bit pattern generator and logic analyzer each / no 1 4 power supply power supply ( 5v, 1.5a, + / 12v, 100ma ) each / no 1 9 embedded systems lab 1 arm cortex m3 1768 evaluation board lpc1768 is arm cortex m3 based micro controller with 512kb flash memory and 64kb sram in system programming ( isp ) and in application programming ( iap ) capabilities. single 3.3 v power supply ( 2.4 v to 3.6 v ) . 70 general purpose i / o ( gpio ) pins with configurable pull up / down resistors, open drain mode, and repeater mode. standard jtag test / debug interface as well as serial wire debug. 12mhz crystal allows easy communication setup one on board voltage regulator for generating 3.3v. input to this will be from external +5v dc power supply through a 9 pin dsub connector piggy back module containing lpc1768 controller standard jtag connector with arm 2×10 pin layout for programming / debugging with arm jtag reset push button for resetting the controller one rs232 interface circuit with 9 pin dsub connector: this is used by the boot loader program, to program lpc1768 flash memory without external programmer. application program can also use this uart for serial communication dc motor interface with direction and speed control stepper motor interface with direction and speed control 16×2 alphanumeric lcd display on chip adc interface circuit with pot each / no 1 8 bit dac interface 4x4 key matrix connected to the port lines of the controller one external interrupt circuit with led indication two digit multiplexed 7 segment display interface interface circuit for on board buzzer, relay and led indication controlled through push button. spi interface: 2 channel adc ic with pot and temperature sensor i2c interface: nvrom ic internal pwm terminated in test point and led standard 26 pin frc connectors to connect to on board interface. a number of software examples in ‘c language’ to illustrate the functioning of the interfaces. the software examples are compiled using an evaluation version of keil4 ‘c’ compiler for arm. 2 power supply ( 5v, 1.5a, + / 12v, 100ma ) each / no 1 10 communication lab 1 frequency modulation and demodulation trainer kit af generator – generates low frequency signals of 500 hz and 5 khz to use as a modulating signal. regulated power supply – on board power supply provide +15v, 15v, +5v, 5v and current rating 150ma each. modulation – frequency modulation using xr 2206 with frequency of operation can be selected externally over a range of 0.01hz to more than 1mhz. demodulation – frequency demodulation using general purpose pll lm565. each / no 1 2 amplitude modulation and demodulation trainer kit rf generator – colpitts oscillator generates, 1 mhz frequency to use as carrier signal af generator – low frequency signal 2 khz is generated and used as the modulation signal power supply – on board power supply provide +12v, 12v and current rating 150ma each modulation – amplitude modulation using bc107 transistor ( npn ) demodulation – envelop detector using diode oa79. each / no 1 3 analog sampling and reconstruction trainer kit onboard input sinusoidal signal: 2 khz. sampling freq: 2 khz, 4 khz, 8 khz, 16 khz, 32 khz ( selectable ) variable duty cycle:10% to 90% cut off freq:3.4 khz. outputs: sampling amplifier & sample hold amplifier reconstruction: 2nd, 4th & 6th order butter worth lpf each / no 1 4 time division multiplexing and demultiplexing trainer kit ( tdm ) with power supply input sine waves: 2khz, 1khz, 500hz, 250 hz synchronization pulse generation: using ( variable 0 5v ) dc level generation of receiver clock and channel information using pll communication through three, two and single wire modes sampling rate: 32 khz reconstruction: 4 order low pass butter worth filter cut off freq: 3.4 khz, clock recovery & sync detect 2 of the fundamentals aspects using pll techniques each / no 1 5 psk / dpsk modulation and demodulation kit with power supply data bits:8 bit rz variable data with sliding switch selection carrier: on board 8 khz / 5v amplitude with 0 degree and 180 degree phase sine wave. psk modulator: using ic cd4051 ( multiplexer ) psk demodulator: carrier phase comparison differential encoder / decoder using ex or and ex nor logic dpsk modulator: using ic cd4051 ( multiplexer ) dpsk demodulator: carrier phase modulation each / no 1 6 ask / fsk modulation and demodulation kit with power supply data bits: variable data using sliding switch carrier :onboard variable frequency and amplitude sine wave bask modulator: using cd4066 ( bilateral switch ask demodulator: using ic tl084 with low pass filter we can see outputs in various test points bfsk modulator: variable carrier frequency modulation bfsk demodulator: using pll method for demodulation also we can see outputs in various test points each / no 1 7 measurement of frequency, guide wavelength, power , vswr and attenuation in microwave test bench klystron power supply klystron mount with klystron tube variable attenuator frequency meter slotted section tunable probe detector mount isolator waveguide stand ( 02 nos. ) bnc bnc cables ( 02 nos. ) cooling fan each / no 1 8 obtain the radiation pattern and measurement of directivity and fain of micro strip dipole and yagi antenna ( 1set ) yagi antenna dipole antenna antenna tripod stands ( transmitter and receiver ) microwave detector ( dc 3ghz ) signal generator 2.0 – 3.0ghz vswr meter coaxial matched loads – 50 ohms 03 nos. short adapter n ( m ) to sma ( f ) adapter sma ( f ) to sma ( f ) adapter sma ( m ) to sma ( m ) rf cable 1m length bnc cable each / no 1 9 determination of a ) coupling and isolation characteristics of microstrip directional coupler b ) resonance characteristics of microstrip ring resonator and computation of dielectric constant of the substrate c ) power division and isolation of microstrip power divider ( 1set ) ring resonator power divider branch line directional coupler parallel coupled directional coupler stripline directional coupler microwave detector ( dc 3ghz ) signal generator 2.0 – 3.0ghz vswr meter coaxial matched loads – 50 ohms 03 nos. short attenuator pad 3db attenuator pad 6db attenuator pad 10db coaxial adapter n ( m ) to sma ( f ) 02 nos. adapter sma ( f ) to sma ( f ) 02 nos adapter sma ( m ) to sma ( m ) bnc cable each / no 1 10 matlab / labview software simulation experiments : nrz, rz, and generation of eye diagram for binary polar signaling. pcm and modulation and demodulation digital modulation schemes 1. dpsk transmitter and receiver 2. qpsk ( 10 users license ) each / no 1 11 vlsi lab 1 cadence / synopsis / mentor graohics / microwind software eda tools required to carry out verilog programs and layout for vlsi circuits. ( 10 users license ) each / no 1 12 computer communication & netwoking lab 1 network simultion software qualnet 10 user license validity: 5 yrs 4 libraries qualnet is a network simulation tool to mimic the behavior of real data communication network like the internet with server pc each / no 1 13 project lab 1 basic project lab tools & instruments 1. soldering gun each / no 1 2. de soldering pump each / no 1 3. antistatic mat for 2” x 3” each / no 1 4. nose plair each / no 1 5. cutting plair each / no 1 6. sleeve remover each / no 1 7. 3 ¾ digit rishmulti 12s each / no 1 8. bread board each / no 1 9. single stand wire ( 10mtr each / no 1 10. crocodile clip with patch cord each / no 1 11. solder lead each / no 1 12.ar ps 302d dc regulated power supply with short circuit & over load protection 0 30v / 2a dual output with two digital meters each / no 1 13. hand held lcr meter each / no 1 2 mini projects assembled & tested a ) als stuprj1 smoke alarm b ) als stuprj2 heat alarm c ) als stuprj3 metal detector d ) als stuprj4 touch alarm e ) als stuprj5 electronic harmonium each / no 1 3 mini projects assembled & tested includes the following f ) als stuprj6 lead acid battery charger g ) als stuprj7 grip tester h ) als stuprj8 light operated relay i ) als stuprj9 light dimmer j ) als stuprj10 water level controller each / no 1 4 mini projects assembled & tested includes the following k ) als stuprj11 door bell / moisture sensor l ) als stuprj12 beat generator m ) als stuprj13 police siren n ) als stuprj14 linear power supply each / no 1 5 mini projects assembled & tested includes the following o ) als stuprj15 rf encoder transmitter & decoder receiver each / no 1 6 adaptor each / no 1 7 project boards for embedded segment controller boards 1.als pjt89c51ed2 ed2 project with proto board each / no 1 2.als pjt arm2148 arm project board with proto board each / no 1 3. als pjt fpga 01 fpga 3s400 project board with proto board each / no 1 4. als pjtbrd armctxm3 01 arm cortex m3 project board with proto board each / no 1 5.als pjt proto 01 proto board ( additional ) each / no 1 8 evaluation boards for study a ) als sda emb eval 03 embedded controller kit b ) power supply ( 5v, 1.5a, + / 12v, 100ma ) each / no 1 9 mini projects controller based 1. als prj / proto / 01 relay project board each / no 1 2. als prj / proto / 02 nvrom project board each / no 1 3. als prj / proto / 03 spi adc project board each / no 1 4.als prj / proto / 01 relay project board each / no 1 5. als prj / proto / 02 nvrom project board each / no 1 6. als prj / proto / 03 spi adc project board each / no 1 10 accessories for controller based projects 1.als pjtbrd / acc / 01 4 channel relay board each / no 1 2.als pjtbrd / acc / 02 4 x 7 segment display board each / no 1 3.als pjtbrd / acc / 03 4 x 4 keypad board each / no 1 4.als pjtbrd / acc / 04 6 keypad board each / no 1 5.als pjtbrd / acc / 05 2 x 16 lcd board each / no 1 6. als pjtbrd / acc / 06 8 led board each / no 1 11 technology study modules 1. als prjbrd ucxp1—01a finger print based door lock each / no 1 2.als prjbrd ucxp2 01a gps location indicator each / no 1 3. als prjbrd ucxp3 01a gsm based home security gsm module each / no 1 4.als prjbrd ucxp4 01 graphic lcd with sensors each / no 1 5.als prjbrd ucxp5 01 zigbee based wireless data acquision system ( min 2nos required for experiment ) each / no 1 6.als prjbrd ucxp6 01 rfid based access control each / no 1 7.als prjbrd ucxp7 01 bluetooth based servo motor each / no 1 12 evaluation board of vhdl kit a ) als sda cpld / fpga 02 universal base board with fpga 3s400 each / no 1 b ) power supply ( 5v, 1.5a, + / 12v, 100ma ) each / no 1 interfaces for the above a ) als nifc 01a stepper motor interface each / no 1 b ) als nifc 05a logic controller interface each / no 1 c ) als nifc 27 adc / dac interface each / no 1 d ) als nifc 17 elevator interface each / no 1 e ) als nifc 11 traffic light interface each / no 1 f ) als nifc 58 temperature and relay interface each / no 1 arm 2148 trainer kit als sda arm7 06 arm7 evaluation board each / no 1 optional : power supply ( 5v, 1.5a, + / 12v, 100ma ) each / no 1 to serial converter each / no 1 als sda arm7 07 arm7 2148 evaluation board optional : each / no 1 power supply ( 5v, 1.5a, + / 12v, 100ma ) each / no 1 usb to serial converter each / no 1 als sda armctxm3 01 arm cortex m3 evaluation board each / no 1 power supply ( 5v, 1.5a, + / 12v, 100ma ) each / no 1 usb to serial converter each / no 1 als sda armctxm3 06 arm cortex m3 1768 evaluation board each / no 1 power supply ( 5v, 1.5a, + / 12v, 100ma ) each / no 1 usb to serial converter each / no 1 13 external interfaces for arm board 1.als nifc 71 rfid interface each / no 1 2. als nifc 72 gsm interface each / no 1 3.als nifc 73 zigbee interface each / no 1 4.als nifc 74 gps co ordinator each / no 1 5.als nifc 75 bluetooth interface each / no 1 6.als nifc 76 graphic lcd interface each / no 1 7.als nifc 77 keypad and dtmf tone generator each / no 1 14 basic electrical engineering lab 1 verification of kvl and kcl for dc circuits this set consists a ) regulated dc power supply – 30v @ 2a b ) edm type analog dc voltmeters – 30v 3 nos. c ) edm type analog dc ammeters – 2a 3 nos. d ) rheostats – i ) 50 ohms / 2a ii ) 100 ohms / 2 a iii ) 150 ohms / 2 a each / no 1 2 measurement of current, power and power factor of incandescent lamp, fluorescent lamp and led lamp: and two way and three way control of lamp and formation of truth table this set consists of : screen printed polycarbonate panel board enclosed in powder coated ms frame consists of mcb, indicator, fuse, single phase digital multifunction meter with ct for direct measurement, 1 no. incandescent lamp, 1 no. fluorescent lamp and 1 no. led lamp. 2 nos of 2 way switches and 1 no. of intermediate switch with terminals for inter connection each / no 1 3 measurement of resistance and inductance of a choke coil using 3 voltmeter method this set consists of : a ) screen printed polycarbonate panel board enclosed in powder coated ms frame consists of mcb, indicator, fuse, 3 nos of digital voltmeters, 1 no. of digital ammeter, single phase auto transformer – 0 270v @ 2a. and 2a choke coil. variable dc supply of 0 200v dc @ 2a for dc motor armature supply and 220v + / 10 % @ 0.5a for field supply to study dc motor control. variable ac current supply of 0 20a ac for testing fuse and mcb. b ) rheostat – 470 ohms / 1.2a each / no 1 4 determination of phase and line quantities in three phase star / delta connected loads: this set consists of : a ) screen printed polycarbonate panel board enclosed in powder coated ms frame consists of mcb, indicator, fuse, 2 nos of ac voltmeters, 2 nos of ac ammeters. b ) three phase auto transformer 0 470v @ 6a mounted on trolley and terminals are brought out on the panel. three phase resistive load – 5 a ( per phase ) / 5 steps suitable for star and delta connection. each / no 1 5 measurement of three phase power using two wattmeter method: this set consists of : a ) screen printed polycarbonate panel board enclosed in powder coated ms frame consists of mcb, indicator, fuse, 1 no of ac voltmeter, 1 no. of ac ammeter and 2 nos of upf wattmeters. b ) three phase auto transformer 0 470v @ 6a mounted on trolley and terminals are brought out on the panel. c ) three phase resistive load – 5 a / 5 steps suitable for star and delta connection. each / no 1 6 measurement of earth resistance: digital earth resistance tester – 10 / 1000 ohms – waco make with testing kit. each / no 1 7 study of effect of open and short circuit in simple circuit: this set consists of: screen printed polycarbonate panel consists of mcb, indicator, fuse, single phase transformer – 500va, primary: 230v, secondary:115v and 2v @ 20a transformer tapping . single phase auto transformer – 2 a, digital ac voltmeter, digital ac ammeter to study open circuit voltage of transformer and short circuit current at low voltage. each / no 1 8 demonstration of cut out sections of electrical machines ( dc machines, induction machines and synchronous machines ) : this set consists of : a ) working cut section of dc shunt motor – 0.5 hp / 220v b ) working cut section of 2 and 4 pole 3 phase induction motor – 0.5 hp / 415v c ) cut section of 3 phase synchronous motor – 1 hp / 415v d ) tester, test lamp and silicon tester ( non contact type ) e ) ups demo kit – open type to observe different parts of ups – 500va each / no 1 15 computer aided building planning & drawing lab 1 desktops: computer configuration a ) processor intel i7 dual core b ) ram 8gb / 6gb c ) hard disk d ) mother board – intel chipset e ) graphics card – 1gb dedicated n vidia graphics card f ) lan g ) monitor 17” led / tft h ) keyboard i ball i ) mouse – i ball each / no 1 2 printers with scanner: hp laserjet printers a3 each / no 1 3 printers : hp laserjet printers a4 size each / no 1 4 autocadd 2022 ( 30 users license software ) each / no 1 5 projector: type of display poly silicon tft active matrix resolution brightlink 480i: 1024 × 768 pixels ( xga ... lens f= 1.80 focal length: 3.71 mm color reproduction full color, 16.77 million colors brightness brightlink 475wi: normal power consum … each / no 1 6 smart board each / no 1 7 15kva with 4hr back up ups for 30 computers each / no 1 8 lan connection for systems and printers each / no 1 16 building materials testing laboratory 1 universal testing machine with extensometer analogue cum computerized universal testing machine with following specifications a ) measuring capacity : 1000kn analogue system : i range 0 1000kn ( least count 2kn ) ii range 0 500kn ( least count 1kn ) iii range 0 250kn ( least count 0.5kn ) iv range 0 1000kn ( least count 0.2kn ) computerized system: measuring range ( kn ) : 0 to 1000kn ( least count 0.1kn ) with measurement accuracy of ±1% extensometer ( mechanical ) : range – 50mm ( least count 0.1mm ) each / no 1 2 compression testing machine analogue cum computerized compression testing machine with following specifications measuring capacity : 3000kn analogue system : i range 0 1000kn ( least count 2kn ) ii range 0 2000kn ( least count 5kn ) iii range 0 3000kn ( least count 10kn ) computerized system: measuring range ( kn ) : 0 to 3000kn ( least count 2kn ) with measurement accuracy of ±1% each / no 1 3 torsion testing machine capacity 200n mt each / no 1 4 bending testing machine each / no 1 5 shear box direct shear apparatus 6speed motorized with loading unit, housing and mould, perforated and non perforated plates, proving ring 10kn, dial gauge of 0.01 x 25mm and slotted weights each / no 1 6 izod charpy pendulum type impact testing machine capacity 170 ( izod ) / 300 ( charpy ) joules each / no 1 7 brinell hardness tester capacity 120 kgf optical magnification:35x, 70x & 140x each / no 1 8 rockwell hardness tester capacity 250 kgf each / no 1 9 vickers hardness tester capacity 120 kgf optical magnification:35x, 70x & 140x each / no 1 10 tool makers microscope : [ travel x.y axis : 50 x 50 mm, working distance : 67mm, magnification : 30 x ( 15x eyepiece x 2x object lens ) ] each / no 1 11 tiles testing machine each / no 1 12 hot air oven alu. chamber, 350x350x350mm, thermostatic ( digital each / no 1 13 digital weighing balance capacity: 30kg with 5grm accuracy each / no 1 14 fine aggregate sieve set standard is sieve set each / no 1 15 metal tray 12x12 each / no 1 16 sieve shaker motorized, with timer 0 60mins, 0.25 hp motor each / no 1 17 coarse aggregate sieve set standard is sieve set each / no 1 18 density basket as per is:2386 ( part iii ) , made of gi wire each / no 1 19 specific gravity bottles 100ml each / no 1 20 loading frame 100 tonnes capacity each / no 1 21 digital slide calipers each / no 1 22 digital screw gauge each / no 1 23 punch each / no 1 24 steel scale each / no 1 25 tamping rod of 10mm diameter each / no 1 26 1000ml glass container each / no 1 27 tamping rod of 16mm diameter each / no 1 28 tool makers microscope : [ travel x.y axis : 50 x 50 mm, working distance : 67mm, magnification : 30 x ( 15x eyepiece x 2x object lens ) ] each / no 1 29 demec gauge 200mm each / no 1 30 dial gauge 200mm each / no 1 31 digital strain gauges each / no 1 32 digital strain indicators each / no 1 33 projector type of display poly silicon tft active matrix resolution brightlink 480i: 1024 × 768 pixels ( xga ... lens f= 1.80 focal length: 3.71 mm color reproduction full color, 16.77 million colors brightness brightlink 475wi: normal power consum … each / no 1 34 smart board each / no 1 35 printers with scanner: hp laserjet printers a3 each / no 1 36 printers : hp laserjet printers a4 size each / no 1 17 engineering geology laboratory 1 streak plates each / no 1 2 knifes each / no 1 3 convex lens ( small for mineral grain size identification ) each / no 1 4 folds, faults dyke, sill, volcano, unconformity models painting on wood. each / no 1 5 250 ml measuring jar / bottles for acidic test of minerals and glass rods. each / no 1 6 projector type of display poly silicon tft active matrix resolution brightlink 480i: 1024 × 768 pixels ( xga ... lens f= 1.80 focal length: 3.71 mm color reproduction full color, 16.77 million colors brightness brightlink 475wi: normal power consum … each / no 1 7 smart board each / no 1 18 surveying practice 1 total station model sokkia cx 105 total station each / no 1 2 auto level each / no 1 3 levelling staff each / no 1 4 measuring tape 30 meters length each / no 1 5 projector type of display poly silicon tft active matrix resolution brightlink 480i: 1024 × 768 pixels ( xga ... lens f= 1.80 focal length: 3.71 mm color reproduction full color, 16.77 million colors brightness brightlink 475wi: normal power consum … each / no 1 6 smart board each / no 1 19 concrete and highway materials laboratory 1 los angels abrason testing machine as per astm / bis specification each / no 1 2 is sieve 1.7mm as per astm / bis specification each / no 1 3 steel frying pan with trowel as per astm / bis specification each / no 1 4 thermometer 110 degree celcius as per astm / bis specification each / no 1 5 thermometer 400 degree celcius as per astm / bis specification each / no 1 6 weighing balance 100kg ( 1gm least count ) capacity 2 sets as per astm / bis specification each / no 1 7 weighing balance 30kg ( 0.1gm least count ) capacity 2 sets as per astm / bis specification each / no 1 8 weighing balance 10kg ( 0.01gm least count ) capacity 2 sets as per astm / bis specification each / no 1 9 weighing balance 500gm ( 0.001gm least count ) capacity 2 sets as per astm / bis specification each / no 1 10 impact testing machine including cylinderical cup and tammping rod as per astm / bis specification each / no 1 11 thickness gauge and length gauge as per astm / bis specification each / no 1 12 bitumen specific gravity bottles ( is 1202 2002 ) as per astm / bis specification each / no 1 13 digital bitumen penetrometer as per astm / bis specification each / no 1 14 apparatus for determination of ductility test as per is 1208 2002 :briquette mould, water bath, putty knife & ductility testing machine as per astm / bis specification each / no 1 15 softening point test apparatus ( ring and ball apparatus ) , supporting stand, beaker & thermometer as per astm / bis specification each / no 1 16 pensky – martens closed tester for testing flash and fire point as per is: 1209 2002 as per astm / bis specification each / no 1 17 tar viscometer apparatus ( is: 73:2006 ) heating pan, as per astm / bis specification each / no 1 18 marshall compaction apparatus to the requirements of aashto:245 electrical loading unit, compaction pedestal, breaking head assembly, flow meter, load transfer bar, specimen moulds 100 mm diameter with base plat, collars, specimen extractor, compaction hammer 4.53 kg x 457 mm fall and marshall moulds with collars 40 no.s as per astm / bis specification each / no 1 19 semi automatic marshall specimen compactor with hammer weight 4.53kg and 457 mm fall complete sets as per astm / bis specification each / no 1 20 gauging trowel as per astm / bis specification each / no 1 21 blaines apparatus ( sets ) conforming to ( is 4031 part 2 ) as per astm / bis specification each / no 1 22 auto clave as per astm / bis specification each / no 1 23 le chatliers apparatus ( sets ) as per astm / bis specification each / no 1 24 hot plate as per astm / bis specification each / no 1 25 cube moulds ( 70.6mm ) as per astm / bis specification each / no 1 26 mortar cube vibrating machine as per astm / bis specification each / no 1 27 pulse velocity test apparatus ( ( portable ultrasonic non destructive digital interface ) , two transducer leads, reference bar ) as per astm / bis specification each / no 1 28 flexure testing machine, as per astm / bis specification each / no 1 29 compaction testing equipment with 1000cc moulds, 1.5metre square steel tray, compaction standard proctor hammer 2.85 & 4.89 as per astm / bis specification each / no 1 30 california bearing ratio testing machine with energy level 1, 2 & 3 moulds 15 no.s complete sets and compaction hammer of 4.89kg 2 no.s sets as per astm / bis specification each / no 1 31 is sieves ( 90mm, 75mm, 63mm, 45mm, 37.5mm, 26.5mm, 25mm, 22.4mm, 20mm, 19mm, 16mm, 13mm, 13.2mm, 12.5mm, 11.2mm, 10mm, 9.5mm, 6mm, 6.7mm, 5.6mm, 4.75, 3.35mm, 2.8mm, 2.36mm, 1.18 mm, 710, 600, 425, 300, 180, 150, 75, 90, 53 microns along with lid and pan ( 3sets ) as per astm / bis specification each / no 1 32 90 micron is sieve as per astm / bis specification each / no 1 33 slump cone with tammping rod ( sets ) as per astm / bis specification each / no 1 34 vee bee consistometer apparatus ( sets ) as per astm / bis specification each / no 1 35 compaction factor appartatus ( sets ) as per astm / bis specification each / no 1 36 concrete cube moulds ( 150 x 150 x 150 mm ) as per astm / bis specification each / no 1 37 cylinders ( 150 mm dia x 300 mm height ) as per astm / bis specification each / no 1 38 beam moulds ( 150 x 150 x 700 mm ) as per astm / bis specification each / no 1 39 concrete permeability apparatus, 3 cell for 150mm cube with compressor ( sets ) as per astm / bis specification each / no 1 40 plastic measuring jar 1000 ml capacity as per astm / bis specification each / no 1 41 sieve shaker, digital as per astm / bis specification each / no 1 42 flow table apparatus as per astm / bis specification each / no 1 43 leather hand gloves as per astm / bis specification each / no 1 44 fibre drums 200 litre, 100litre capacity as per astm / bis specification each / no 1 45 concrete cube vibration machine as per astm / bis specification each / no 1 46 pan mixer mixing capacity: 40 ltrs overall dimension: 910mm x 875mm x 1250mm motor : 2 hp drum rpm : 24 rpm power supply: 440v frequency: 50hz as per astm / bis specification each / no 1 47 vicat apparatus ( conforming to is: 5513 1996 ) with plunger and needle as per astm / bis specification each / no 1 48 stop watch, funnel, trowel, graduated glass cylinders, mixing tray, platens as per astm / bis specification each / no 1 49 le chatelier flask of 250 ml as per astm / bis specification each / no 1 50 specific gravity bottle for cement / pycnometer of 100 ml as per astm / bis specification each / no 1 51 angularity number metal cylinder, tamping rod, balance, metal scoop as per astm / bis specification each / no 1 52 compression testing machine capacity of load up to 40tonnes as per astm / bis specification each / no 1 53 rebound hammer instrument with abrasive stone as per astm / bis specification each / no 1 54 ( l box test apparatus ( l box, measuring scale ) as per astm / bis specification each / no 1 55 u box test apparatus with measuring scale as per astm / bis specification each / no 1 56 j ring test apparatus with slump cone ( astm c1621 / c1621m 06 ) as per astm / bis specification each / no 1 57 v funnel test apparatus ( v funnel, container ) as per astm / bis specification each / no 1 58 slump flow test apparatus ( astm c 1611 / c 1611m 05 ) with set for self compacting concrete ( abrams cone, baseplate ( 900x900mm ) , rule, weighted collar ) as per astm / bis specification each / no 1 59 steel cylinder with open ends, cylindrical measures, tamping rod for aggregate crushing test as per astm / bis specification each / no 1 60 digital oven 600x600x600mm, 224hr, 2.5kw 3shelves 5 c 250 c power 220 volt each / no 1 20 software application laboratory 1 etabs 2021 stadd pro v 22sap 2021, safe v 19 license software 30 users each / no 1 2 computers – desktops computer configuration a ) processor intel i7 10th gen b ) ram 12gb c ) hard disk 1tb d ) mother board – intel chipset e ) graphics card – 2.5gb dedicated n vidia graphics card f ) lan g ) monitor 17” led h ) keyboard i ball i ) mouse – i ball each / no 1 3 printers with scanner hp laserjet printers each / no 1 4 projector type of display poly silicon tft active matrix resolution brightlink 480i: 1024 × 768 pixels ( xga ... lens f= 1.80 focal length: 3.71 mm color reproduction full color, 16.77 million colors brightness brightlink 475wi: normal power consum … each / no 1 5 smart board each / no 1 6 printers with scanner: hp laserjet printers a3 each / no 1 7 15 kva 3hr back up ups for computer each / no 1 8 lan connection for systems and printers each / no 1 21 environmental engineering laboratory 1 nephelo meter turbidity meter as per astm / bis specification each / no 1 2 uv vis spectrophotometer model: xd 7500, make: lovibond germany each / no 1 3 ph meter with ph & orp electrode model: ph 700 make: eutech each / no 1 4 bod incubator model: bio bi 104a, make: biocare each / no 1 5 cod thermoreactor 24 places / holes make: tintometer ( lovibond ) each / no 1 6 cod digestion vials, high range, pk / 25 each / no 1 7 autoclave each / no 1 8 centrifuge each / no 1 9 optional item auto lpg shut off system for flame photometer each / no 1 10 optional item li filter each / no 1 11 optional item ca filter each / no 1 12 optional item auto ignition each / no 1 13 conductivity meter benchtop each / no 1 14 muffle furnace each / no 1 15 hot air oven each / no 1 16 analytical balances– internal calibration each / no 1 17 flocculator ( jar test apparatus ) each / no 1 18 student monocular each / no 1 19 electric bunsen burner each / no 1 20 referigerator each / no 1 21 hot plate each / no 1 22 3362 – all glass double distillation unit, with borosilicate each / no 1 23 colony counter – digital – desk model each / no 1 24 portable dissolved oxigen meter with optical do electrode each / no 1 25 imhoff cones each / no 1 26 chlorine test kit each / no 1 27 magnetic stirrers with hot plate 2 lts each / no 1 28 water bath rectangular ( double walled ) each / no 1 29 3082 desiccators, with cover and porcelain plate each / no 1 30 rotary shaker each / no 1 31 desktop computer withi7, 16gb, 2gb graphics 2tb hdd each / no 1 32 laser jet printer and scanner each / no 1 33 portable ph / conductivity meter each / no 1 34 dc power supply each / no 1 35 noise dozi meter each / no 1 36 ambient air quality analysizer kit each / no 1 glasswares each / no 1 37 gooch crucibles each / no 1 38 funnel each / no 1 39 beakers capacity: 25 ml each / no 1 40 beakers capacity: 50 ml each / no 1 41 beakers capacity: 100 ml each / no 1 42 beakers capacity: 250 ml each / no 1 43 beakers capacity: 2000 ml each / no 1 44 4980 flask , erlenmeyer, conical narrow mouth capacity: 50 ml each / no 1 45 4980 flask , erlenmeyer, conical narrow mouth capacity: 100 ml each / no 1 46 4980 flask , erlenmeyer, conical narrow mouth capacity: 250 ml each / no 1 47 4980 flask , erlenmeyer, conical narrow mouth capacity: 500 ml each / no 1 48 4980 flask , erlenmeyer, conical narrow mouth capacity: 1000 ml each / no 1 49 conical flask with interchangeable stopper capacity: 50 ml each / no 1 50 conical flask with interchangeable stopper capacity: 100 ml each / no 1 51 conical flask with interchangeable stopper capacity: 250 ml each / no 1 52 pipettes capacity: 1 ml each / no 1 53 pipettes capacity: 2 ml each / no 1 54 pipettes capacity: 5 ml each / no 1 55 pipettes capacity: 10 ml each / no 1 56 pipettes capacity: 25 ml each / no 1 57 2124 burettes, each / no 1 58 burette stand ( metal ) size:8x5x24 each / no 1 59 bod bottles , 300ml each / no 1 60 china dishes – small ( 50mm ) each / no 1 61 petri dishes size 80x17mm each / no 1 62 reagent bottle capacity: 250 ml each / no 1 63 reagent bottle capacity: 500 ml each / no 1 64 reagent bottle capacity: 1000 ml each / no 1 65 1519 bottle reagent, amber, wide mouth, graduated, with screw cap and pouring ring each / no 1 66 nesselers tube each / no 1 67 measuring cylinders capacity: 100 ml each / no 1 68 measuring cylinders capacity: 5 ml each / no 1 69 measuring cylinders capacity: 10 ml each / no 1 70 measuring cylinders capacity: 25 ml each / no 1 71 measuring cylinders capacity: 50 ml each / no 1 72 measuring cylinders capacity: 100 ml each / no 1 73 spatula 6” each / no 1 74 magnetic beads each / no 1 75 cod vials each / no 1 76 vials stand each / no 1 77 test tube holder each / no 1 78 laboratory tray each / no 1 79 beaker holder each / no 1 80 projector type of display poly silicon tft active matrix resolution brightlink 480i: 1024 × 768 pixels ( xga ... lens f= 1.80 focal length: 3.71 mm color reproduction full color, 16.77 million colors brightness brightlink 475wi: normal power consum … each / no 1 81 smart board each / no 1 82 printers : hp laserjet printers a4 size each / no 1 22 computer aided detailing of structures 1 desktops: computer configuration a ) processor intel i7 dual core b ) ram 8gb / 6gb c ) hard disk d ) mother board – intel chipset e ) graphics card – 1gb dedicated n vidia graphics card f ) lan g ) monitor 17” led / tft h ) keyboard i ball i ) mouse – i ball each / no 1 2 printers with scanner and copier: hp laserjet printer a3 each / no 1 3 printers : hp laserjet printers a4 size each / no 1 4 autocadd 2021 ( latest version ) ( 30 users licensed software ) each / no 1 5 projector:type of display poly silicon tft active matrix resolution brightlink 480i: 1024 × 768 pixels ( xga ... lens f= 1.80 focal length: 3.71 mm color reproduction full color, 16.77 million colors brightness brightlink 475wi: normal power consum … each / no 1 6 lan connection for systems and printers each / no 1 7 server system for 30 computers each / no 1 8 antivirus for all systems total av antivirus pro each / no 1 9 15kva with 3hr back up for 30 computers each / no 1 23 geotechnical engineering laboratory 1 pycnometer as per is 2386 ( p iii ) 1kg glass jar with brass cone, locking ring and rubber seal. each / no 1 2 density bottle, 100 ml each / no 1 3 digital hot air oven ( temperature controlled ) dimensions 600 x 600x 600 mm, 224 ltrs, 2.5kw, 3 shelves, range 5°c above ambient to 250°c maximum, accuracy + / 2°c, power supply 220 volts each / no 1 4 digital weigh balance 0.5kg capacity with 0.001g accuracy each / no 1 5 digital weigh balance 5kg capacity with 0.01g accuracy each / no 1 6 any suitable non corrodible air tight container moisture content determination of soil samples each / no 1 7 desiccator with any suitable desiccating agent. convenient size is one about 200 to 250mm in diameter containing anhydrous silica gel. each / no 1 8 speedy moisture meter as per as per is 2720 ( p ii ) , astm d 4944 aashto t 217 wooden carrying case consisting of pressure vessel with clamp for sealing cap, rubber sealing gasket, pressure gauge in percentage moisture content 0 25% or 0 50% on the wet weight basis ( 6 gm ) counter poised balance for weighing samples, scoop for measuring calcium carbide, bottle of calcium carbide ( 500gm ) , a set of 4 steel balls and a cleaning brush. each / no 1 9 infrared moisture meter as per astm d 4944 aashto t 217 suitable for operating on 220 v, 50hz, single phase, ac supply. each / no 1 10 soil testing kit consists of : 12 thick walled test tubes with rubber bungs. 1 tube cleaning brush. 1 bottle of barium sulphate ( 100gm ) 1 bottle of soil indicator ( 100gm ) 1 bottle of distilled water ( 500gm ) 1 spatula. 1 colour chart, range 4.0 to 8.0 ph in 0.5 ph steps. complete with carrying case each / no 1 11 core cutter cylindrical core cutter made of gun metal, 100 mm dia x 130 mm long steel dolly, 25 mm high and 100 mm dia fitted with a lip, to enable it to be located on top of the core cutter rammer with steel rod each / no 1 12 sand replacement kit 1. small sand pouring cylinder, 3. cylindrical calibrating container, 4. cylindrical steel core cutter, 5. metal tray with hole conforming to is 2720 part 28 , 100mm dia each / no 1 13 soil hydrometer as per astm d 422 aashto t 88, bs 1377 2.used for grain size analysis of soils where more than 10% of the material will pass through 75 microns b.s. sieve. manufactured from clear transparent glass having uniform clarity throughout the upper end on which density scale is engraved. the scale range is 0.995 to 1.030 0 density ( gms. / cc ) at 27oc smallest division on the scale is 0.0005. each / no 1 14 high speed stirrer is 2720 ( part iv ) this is for mechanical analysis and also other laboratory applications for stirring speed approximately 4000 r.p.m. under load. a dispersion cup is supported on a rest on the stand of the stirrer and has a removable baffle. for operation on 230v a.c. supplied with dispersion cup or baffle cup. each / no 1 15 standard test sieves 20cm diameter, ( spun brass frame ) as per is :460 ( par t i, ii ) 1978, size available: 4.75mm, 2.80 mm, 2.36 mm, 3.00 mm, 1.70 mm, 1.18 mm, 180 micron, 150 micron, 125 micron, 90 micron, 75 micron, 425 micron, 300 micron, 45 micron. lid and receiver for 200 mm dia sieves, made of brass. each / no 1 16 standard test sieves 30 cm diameter, ( g.i. sheet frame ) as per is :460 ( par t i, ii ) 1978 sizes available : 20mm, 12.5mm, 10mm, 4.75mm, 2.36mm, 1.18mm, lid & receiver in g.i. sheet frame for 300mm dia. each / no 1 17 mechanical seive shaker the shaker should accommodate upto 7 nos. sieves of dia 200 or 300mm, 450mm suitable operation of 230 v a.c. single phase. electrical sieve shaker with 16 adapter each / no 1 18 casagrande liquid limit apparatus complete with casagrandes grooving tool and gauge block conforming to is 2720 part 05 each / no 1 19 cone penetration apparatus with penetration test cone and test cup ( 55 mm dia x 40 mm deep ) conforming to is 2720 part 05 each / no 1 20 plastic limit set consists of one each : i ) porcelain evaporating dish, ii ) shrinkage dish, iii ) glass cup, iv ) perspex plate with three metal prongs, v ) flexible spatula 100mm, vi ) glass cylinder, vii ) 25ml x 1ml, supplied without mercury each / no 1 21 shrinkage limit set consists of one each : i ) porcelain evaporating dish, ii ) shrinkage dish, iii ) glass cup, iv ) perspex plate with three metal prongs, v ) flexible spatula 100mm, vi ) glass cylinder, vii ) 25ml x 1ml, supplied without mercury each / no 1 22 linear shrinkage mould bs 1377 2 a simple mould which is filled with the soil under test. this is then dried and the resulting decrease length of the specimen measured is expressed as the linear shrinkage. it is 25mm dia. x 12.5mm height x 140mm length. each / no 1 23 standard proctor compaction moulds with mould 150mm internal dia x 127.3mm height, 2250ml volume ( gun metal ) , rmmer should be 2 .8 6 k g x 300m m fall, for light compaction test as per is 2720 part vii, each / no 1 24 modified proctor compaction apparatus mould mould 150mm internal dia x 127.3mm height, 2250ml volume ( gun metal ) rammer weight 4 .8 9 k g x 450mm fall, for high compaction test as per is 2720 part viii each / no 1 25 universal permeability test apparatus as per is 2720 ( part xbii ) , permeameter mould of non corrodible material ( gun metal ) having a capacity of 1000 ml, with an internal diameter of 100mm and internal effective height of 127.3mm with 0.1 mm thick.three glass stand pipes a stand with nine glass tubes of 6mm, 10mm, 20mm, 25mm, 40mm, 50mm, 60mm, 70mm, 75mm, bore tube is provided with over flow arrangement for constant head tests. the remaining tubes are used for falling head test. each / no 1 26 unconfined compression tester proving ring type ( hand operated ) as per is: 2720 ( part 10 ) :1991, load frame, hand operated, capacity 50 kn ( 5, 000 kgf ) , mould, 100mm dia x 127.3mm height ( 1, 000ml volume ) with, base plate and collar., proving ring, with integral boss, high sensitivity 2.5kn ( 250 kgf ) capacity, perforated swell plate, 100mm dia x 16mm thickdial gauge , 25mm travel, 0.01mm least count lid & receiver in g.i. frame for 300mm dia x 450mm dia sieves, spencer, 100mm dia x 12.7mm thick, pair of porous stones, 100mm dia x 12.7mm thick, load transfer bar, steel ball soaking tank, 250mm dia x 210mm high. each / no 1 27 direct shear apparatus ( motorized ) as per is: 2720 ( part viii ) , astm d 3080 for determination of the direct shear strength of soils on specimen size 60 mm x 60 mm x 25 mm. specification: the apparatus comprises of the following: loading unit: supplied with load yoke with direct and lever system for applying load. normal stress capacity 8kg / sq.cm. shear box assembly: comprising direct shear box in two halves for a square specimen size 60 x 60 x 25 mm one pair of plain gripper plates, one pair or perforated gripper plates, one pair or porous stones, one top loading pad. shear box housing: accommodates the direct shear box assembly. complete with two ball roller strips. specimen cutter:for cutting 60 x 60 x 25 mm specimen from larger samples. set of weights to give a normal stress of 3 kg / sq.cm. essential accessories: high sensitivity compression ring cap 200 kg one consolidation dial gauge 0.01 mm x 25 mm and one strain dial gauge 0.01 mm x 25 mm and one strain dial gauge 0.01 mm x 25 mm. optional extras: additional set of weights to give a normal stress of 5 kg / cm2 soil sampler for 60 mm x 60mm specimen and test from pad of 50. spares: porous stone for 60 mm x 60 mm size sample available in pairs. each / no 1 28 triaxial test apparatus as per is 2720 ( part xii ) , consisting of load frame, triaxial cell, dial gauge, proving ring & lateral pressure assembly, triaxial cells transfer bar ( loading ram ) passes through linear bearing making it almost friction free. base has four no volume change valves one each for back pressure / pore pressure, confining pressure and top drainage.one plastic drainage tube.accesories sheath stretcher, porous stones, plain discs, top drainage cap, rubber membranes ( pack of 10 ) and o rings. loading frame 50 kn capacity, rate of strain: 0.00001 9.9999 mm / min, pressure controller for confining pressure upto 1700 kpa, lateral pressure assembly: consists of a pressure chamber which has a flanged top 2 cap fitted with a 10 kg / cm . pressure gauge and a valve for pumping in air. water inlet and drain cock are fitted to the chamber. 2 the foot pump supplied easily develops a pressure of 10 kg / cm2 complete with connecting pressure hose. with electricaly operated maching with digitalstrain gauge each / no 1 29 cbr test apparatus motorized as per is : 9669, is : 2720 ( part xvi ) load frame 50kn capacity, a mould of 150 mm. i.d. x 175 mm. high with clamping lugs complete with extension collar and perforated base plate made of gun metal. a cutting collar to fit mould body. a penetration piston assembly of 50 mm. diameter and a bracket for the dial gauge. a perforated swell plate of 148 mm. diameter with an adjustable stem and lock nut. a circular spacing disc of 148 mm. diameter x 47.7 mm. high complete with a removable `t handle. a metal tripod for the dial gauge. dial gauge 2 in. travel & 0.001 in division for cbr penetration measurement, having provision for increasing the dial gauge plunger length. cbr essential : proving ring 10 kn capacityx 0.01 kn / div sensitivity / readability, dial gauge 0.01 mm. x 25 mm. travel. spares: rammer 2.6 kg & 4.89 kg.cbr mould complete with extension collar and perforated base plate, perforated swell plate with adjustable stem and lock nut, solid base plate, cutting collar, penetration piston assembly, metal tripod for dial gauge, circular spacer disc, surcharge weight ( annular ) 2.5 kg, surcharge weight ( slotted ) 2.5 kg each / no 1 30 swell test apparatus load frame, hand operated, capacity 50 kn ( 5, 000 kgf ) , mould, 100mm dia x 127.3mm height ( 1, 000ml volume ) with, base plate and collar., proving ring, with integral boss, high sensitivity 2.5kn ( 250 kgf ) capacity, perforated swell plate, 100mm dia x 16mm thickdial gauge , 25mm travel, 0.01mm least count lid & receiver in g.i. frame for 300mm dia x 450mm dia sieves, spencer, 100mm dia x 12.7mm thick, pair of porous stones, 100mm dia x 12.7mm thick, load transfer bar, steel ball soaking tank, 250mm dia x 210mm high. each / no 1 31 consolidation app. ( three gang ) as per is 2720 ( part xv ) , is 12287, bs 1377, astm d 2435, loading unit, maximum capacity 20kg / cm.sq. having a loading yoke connected to a lever arm with a counter balancing adjustment and having a lever ratio of 1:1 the whole assembly being mounted on a sturdy steel frame stand. the loading unit is so designed that it can be used for consolidation cells of different diameters as well as different dia floating ring type consolidation cells. fixed ring type consolidometer ( odeometer ) cell assembly for testing 60mm dia x 20mm thick specimen comprising: fixed ring for specimens 60mm dia x 20mm thick with guide ring. top and bottom porous stones for 60mm dia specimen. perforated pressure pad, channeled base with water inlet and gasket flanged water jacket, water reservoir with plastic tube and pinch cock. set of weights to give a pressure of 10kg / cm.sq. on 60mm dia specimen, comprising : 7 nos. 0.05 kg / cm .sq., 5nos. 0.1 kg / sq.cm., 6nos. 0.5kg / sq. cm., and 5 nos. 1.0 kg / sq.cm. supplied complete as above but without dial gauge. dial gauge 0.002 mm x 10mm. extension piece, 40 mm long, consolidation test forms pad of 50 for one dimensional consolidation. each / no 1 32 vane shear apparatus as per is 2720 ( part 30 ) 1980. consists of a torque head adjustable in height by means of a lead screw rotated by a drive wheel to enable the vane to be lowered into the specimen. rotation of the vane is by means of a hand wheel which operates a worm gear arrangement turning the upper end of a calibration torsion spring, vane dia, rod dia, vane size & vane height are as per is specifications. the vane shall consist of 4 blades each fixed at 90 degrees to the adjacent blades. the vane blades shall be welded together suitably to a central rod, the maximum diameter of which should preferably not exceed 2.5mm in the portion of the rod which goes into the specimen for the test.the vane shaft is attached through the hollow upper shaft to a resettable pointer, which indicates the angle indicates the angle of torque on a dial graduated in degree the dial reading multiplied by spring factor gives the torque a container for soil sample is also supplied & a sampling tube of 38mm. i.d. & 150mm long can also be used as container . supplied with set of four springs, one each of approx. 2 kgs / cm sq., 4kgs / cm sq., 6 kgs / cm sq. & 8kgs / cm sq. complete as above in a wooden carrying case each / no 1 33 relative density test as per is 2720 ( part xiv ) , the equipment consists one each of: vibratory table, with a cushioned steel vibrating decks about 75cm x 75cm. it has a frequency of approximately 3600 vibratory table, minute under a 11.5kg load. amplitude is variable in between 0.65mm in step of 0.05 to 0.25mm, 0.25 to 0.45 mm and 0.45 to 0.65mm. suitable for operations on 415v, three phase supply. cylindrical metal unit weight mould, 3000ml. capacity.guide sleeve with clamp assembly. surcharges base plate for mould. handle for surcharge base plate. surcharge weight. the total weight together with surcharge base plate and handle is equipment to 140 kg. / sq. cm. for mould. cylindrical metal unit weight mould 15000 ml. capacity. ( total weight together with the above mould & surcharge weight is equivalent to 140 kg. / sq. cm ) dial gauge 0.01mm x 50mm travel. extension piece 25mm for dial gauge. each / no 1 34 proctor needles ( spring type ) as per astm d 1558 the instrument consists of a needle attached to a spring loaded plunger, the stem of which is calibrated to read 0 to 40 kg division. long stem is graduated at every 12.5mm to read depth of penetration and for use with needles of larger areas. the small penetration stem is also graduation in 12.5mm division and is used with needles of smaller areas. needle points one each of 0.25, 0.5, 1.0, 1.5, 2.0, 3.5 and 6.0 sq cm. and one tommy pin is supplied. complete as above in a wooden carrying case. each / no 1 35 pore pressure apparatus 10kg / cm2 the apparatus consists of a panel for wall mounting on which are fitted 1.0 to 10kg / cm sq x 0.1kg cm. sq. a pressure gauge, bourdon tube type 15 cm dia.glass u tube manometer , 50ml burette for measuring the volume change in the soil specimen. pressure pump fitted with four sleeve packed valves, operated by means of a hand wheel on the end of the piston rod which is threaded through the pump cap and gives a smooth, fine adjustment of pressure. copper coil and water reservoir is fitted on board with complete stand assembly. the unit is tested against leaks up to 10kg / cm sq. each / no 1 36 split spoon sampler as per is 2131 1963, is 9640 1980 the sampler is made from a steel tube split length wise & held together by a head fitted with a ball check valve & a hardened steel shoe in size cutting edge of 35mm dia. the sampler is 35mm i.d. & 50.8mm in outer dia & 508mm long. one adopter to connect a type drill rods is also to be supplied. each / no 1 37 standard penetration test set as per is 2131, is 9640 consist of three metal pipe legs approximately 5 mtr. long connected by a tie bolt each leg is made up of two parts for ease of transportation complete with one pulley one leg has building ladder each / no 1 38 drop hammer and guide pipe weight 65 kg. complete with two end caps to give a free fall of 75cm the drop hammer each / no 1 39 dynamic cone penetration test consists of 8 kg weight having a drop of 575 mm, fitted to the end of the shaft is a 20 mm diameter cone. with the standard dcp measurements can be made down to a depth of approximately 850 mm. each / no 1 40 static cone penetrometer, 30kn ( 300kgf ) capacity, hand operated consists of penetration cone, steel 60 angle 10cm base area with friction jacket one mantle tube, non uniform , 36mm od at the two ends and reduced dia in between with sounding rod working length 1mfifteen. load measuring head, with automatic cut off valve and oil can, without pressure gauge one pressure gauge, 0 60kg / cm 2 pressure gauge, 0 160kg / cm one 06 ) screw anchor , with bolt four anchor driving handle one t rod one spanner one extension pipe 0.5m long for anchor driving handle four each / no 1 41 auger posthole type posthole type: ( a ) 100mm dia screw type: ( a ) 38mm, ( c ) 50mm ( c ) 100mm dia extra: extension rod 1 meter length with threading at both ends and couplings, set of two spanners and tee piece. each / no 1 42 sampling tubes in the relieved type of tube, the internal diameter is relieved by about 0.5mm ( inside clearance 2% ) beyond approx. 19mm length from the cutting edge of the tube. unrelieved type of 150mm dia, each / no 1 43 projector type of display poly silicon tft active matrix resolution brightlink 480i: 1024 × 768 pixels ( xga ... lens f= 1.80 focal length: 3.71 mm color reproduction full color, 16.77 million colors brightness brightlink 475wi: normal power consum … each / no 1 44 smart board each / no 1 45 printers : hp laserjet printers a4 size each / no 1 24 research laboratory 1 2000 kn loading frame each / no 1 2 hydraulic jacks – 1000 kn and 2000 kn, low capacity ( 100 kn and 30 kn ) mechanical jacks each / no 1 3 load cell with digital load indicators – 500 kn, 1000 kn and 2000 kn each / no 1 4 universal testing machine ( 600 kn capacity ) each / no 1 5 portable high speed 4 channel data acquisition system with filters and supporting software and note book pc each / no 1 6 seismic accelerometers with accessories – each / no 1 7 a ) digital demec gauges , each / no 1 b ) digital dial gauges mechanical strain gauges each / no 1 8 4 channel high speed usb supported data acquisition system with filters and software each / no 1 9 seismic accelerometers ( high sensitivity icp type ) with accessories each / no 1 10 finite element analysis package – static and dynamic analysis with linear and non linear analysis modules each / no 1 11 shock table testing facility ( 4.2m x 3.5m ) with a 1400.0kg mass pendulum impacting device each / no 1 12 computerized servo controlled compression testing machine, 2000.0kn capacity, specially designed for testing of masonry prisms each / no 1 25 elements of mechanical engineering 1 sectional working model of 2 stroke petrol engine each / no 1 2 sectional working model of 4 stroke petrol engine each / no 1 3 francis turbine model each / no 1 4 pelton wheel turbine model each / no 1 5 kaplan turbine model each / no 1 6 centrifugal pump actual cut section each / no 1 7 vapor compression refrigeration system demo model each / no 1 8 vapor absorption refrigeration system demo model each / no 1 9 gear box demonstration model each / no 1 10 demo model of open and cross belt drives each / no 1 11 robot joints and links ( demo purpose ) each / no 1 12 air conditioning system ( demo model ) each / no 1 26 chemistry laboratory 1 potentiometer ( make: systronics 335 ) high quality precision instrument digital mode designed to take care of mv measurements in chemical laboratories. minimum control on front panel and ease of operation make it handy in routine analysis. precision ensured using very low temperature co efficient components, latest ic regulators, very high input impedance op amps and lsi circuits. millivolt range : 0 to + / 1999 mv, slope correction : 80% to 110%, resolution : 1 mv in mv mode, repeatability : + / 1mv + / 1 digit for mv, temperature compensation: 0 to 100 °c, digital display: 3½ digit red led seven segment, power : 230 volts + / 10% 50 hz, 10 va. ( with decimal point ) . accessories: platinum electrode and calomel electrode, stand and clamp & instruction manual. each / no 1 2 colorimeter ( make: systronics ) photo electric colorimeter digital model, used for various calorimetric analysis, easy to operate accurate and reliable instrument. colorimeter operated by passing white light sequentially through an optical colour filter, a fixed opening, and a test tube containing an unknown solution whose concentration needs to be determined. the transmitted light from the sampler is then detected by a photo cell and displayed. the display is calibrated directly in optical density. specification: wavelength : 400 to 700 nm selected b filters mounted on a turret light source : 6 volt led, detector: encased spill proof selenium photo cell display: 3 digit, calibrated directly in optical density, resolution: 0.01 in o.d standard : turret mounted filters, accessories four test tubes, cuvettes with stand, instruction manual. each / no 1 3 conductometer ( make: systronics –mk 509 ) digital model for routine measurement of conductivity of various electrolytes. the instrument using the state of art ic technology and consuming very little power. source frequency ( 100 hz or 1 khz ) gets automatically in the appropriate range. specification: source frequency: 100 hz or 1 khz automatically selected. range: 0 to 200 ms in 5 ranges, accuracy : + / 1 digit indication : 2 ½ digit led display, conductivity cell : 1 cell constant cell compensation : 0.9 to 1.1, power requirement: 230 volt, 50 hz + / 10% standard accessories: 1 ) conductivity cell ( 1.00 c.c + / 10% ) , 2 ) stand & clamp, 3 ) instruction manual. each / no 1 4 ph meter ( make: systronics ) digital model, high precision type for routine chemical analysis work in the laboratory having latest technology ic regulators and lsi circuits. housed in rust proof injection moulded cabinet. specification: ph range : 0 to 14 ph, slope correction : 80% to 110% resolution : 0.01 ph, repeatability : + / 0.01 ph + / 1 digit for ph standardization range: + / 2 ph, temperaturecompensation: 0 to 100 ° c display : 3 ½ digit lcd 7 segment with automatic polarity & decimal point power : 230 volts + / 10% 50 hz, 10va. accessories: combined electrode, stand & clamp and instruction manual. each / no 1 5 aquarium motor ( fish aquarium motor ) jp 700g multi function submersible pump excellent internal filter with pump for small aquariums. recommended for tropical set up only. not suggested for planted tank or marine set up, model : jp 700g, voltage : 110v / 220v / 240v, frequency : 50hz / 60hz power : 12w, h max : 1.2m output : 650h, weight 0.40kg dimensions : 90*51*100mm each / no 1 6 ostwald’s viscometer size: 120x1 mm ( length x internal diameter ) overall height : 237 mm, material : borosil glass each / no 1 7 digital stop clock stainless steel with powder coated paint, digital model, high precision type for routine chemical analysis work in the laboratory. housed in rust proof injection moulded cabinet. each / no 1 8 thermometer glass thermometer with accurate readings. 100°c thermometer = 5 nos 250°c thermometer = 5 nos each / no 1 9 1. calomel electrode ( suitable for systronics 335 ) each / no 1 2. platinum electrode ( suitable for systronics 335 ) each / no 1 3. conductivity cell ( suitable for systronics –mk 509 ) each / no 1 4. glass electrode ( suitable for systronics 335 ) each / no 1 10 computer ( desktop ) make: dell ( inspiron, ultra processor, 7g ) each / no 1 11 printer make: hp 1020 each / no 1 12 projector make: benq each / no 1 27 research laboratory 1.c programming laboratory 1.computers ( wi fi enabled ) computers:7thgeneration corei5 / i7, 8gb ram, 1tb hdd, 2gb graphics, 23.8 fhd windows 10 all in one desktop pc with wi fi enabled each / no 1 2.server computer higher end specifications each / no 1 3.laser printers hp laser jet pro m1210 multifunction printer series each / no 1 4.ups and batteries 10 kva – ups each / no 1 5.batteries rack capacity of 20 to 25 batteries each / no 1 6.network printer hp jet 4240n network ready laser printer each / no 1 7.networking for 20 nodes cat6 utp cable ( box of 305 mtrs ) , 24 port ethernet networking switch – sr224 cisco, i / o with smb, jack panel – 24 ports cat6 patch cable ( 3 mts ) , rj 45 connectors, 1” flexible pipe per runnining mtr, 2” flexible pipe per running mts, networking rack each / no 1 8.air conditioners for labs centralized ac with duct system each / no 1 9. projectors dell 1510x each / no 1 2.analog and digital electronics lab / microcontroller lab arm / 7tdmi / lpc2148 kit including all interface and accessoreies arm / 7tdmi / lpc2148 kit including all interface and accessoreies each / no 1 patch cords patch cords each / no 1 cro probes cro probes each / no 1 pcb spring board pcb spring board each / no 1 ics: ics: 555 ua741, 7400, 7402, 7404, 74138, 74151 7490, 7495, 7486, 7410, 7420, 7408, 7432, 7410, 7490, 7476 each / no 1 resistors: 100k, 10 k, 1k, 270 ω, 22k, 4.7 k, 15k, 7 k, 5k, 33 k, 6.8 k, 3.3 k, 2.2 k, 90 k, 470 ω, 8.2 k, 47 k, 1.8 k, 10 k , potentiometer 90k, 20k resistors: 100k, 10 k, 1k, 270 ω, 22k, 4.7 k, 15k, 7 k, 5k, 33 k, 6.8 k, 3.3 k, 2.2 k, 90 k, 470 ω, 8.2 k, 47 k, 1.8 k, 10 k , potentiometer 90k, 20k each / no 1 capacitor:1 uf, 0.47 uf, 0.01 uf, 0.1 uf, dc supply: +5 volts 1a, ±12 volts 500 ma socket: 5 nos 16 / 20 pin zif socket bread board: 1 nos 680 tie points logic i / p: 16 nos toggle switches for inputs logic o / p: 16 nos high bright leds for outputs ttl clock: 1hz, 10hz, 100hz, 1 khz, 10 khz display: 2 nos 7segment display mono pulse: 1 hi & 1 low pulse terminals: 4mm bt 15 terminals each / no 1 ups 15 kva 15kva online ups, dsp controlled, igbt, with lcd display 1 phase input output each / no 1 150 kvh batteries exide make 12v 150 / 200 ah smf batteries each / no 1 computer lab wall mounted projectors 3, 000 ansi lumens, resolution 1024x768 display type 0.55 dlp x 1 video modes 720p, 1080i, 1080p / 60, 1080p / 24 lamp type 190w metal halide bulb each / no 1 staff mfb lazer printers main input tray 150 sheets of regular weight print speed 14 a4 pages per minute ( ppm ) , 15 letter size ppm print resolution 600 x 600 dpi duty cycle 8, 000 single sided pages per month ( maximum ) each / no 1 department and staff laptop computers:7thgeneration corei5 / i7, 8gb ram, 1tb hdd, 2gb graphics, 23.8 fhd windows 10 all in one desktop pc with wi fi enabled each / no 1 c programming laboratory computers ( wi fi enabled ) computers:7thgeneration corei5 / i7, 8gb ram, 1tb hdd, 2gb graphics, 23.8 fhd windows 10 all in one desktop pc with wi fi enabled each / no 1 computer network laboratory / mobile application developmen / artificial intelligence and machine learning laboratory server computer higher end specifications each / no 1 laser printers hp laser jet pro m1210 multifunction printer series each / no 1 ups and batteries 10 kva – ups each / no 1 batteries rack 25 batteries each / no 1 network printer hp jet 4240n network ready laser printer each / no 1 networking for 20 nodes cat6 utp cable ( box of 305 mtrs ) , 24 port ethernet networking switch – sr224 cisco, i / o with smb, jack panel – 24 ports cat6 patch cable ( 3 mts ) , rj 45 connectors, 1” flexible pipe per runnining mtr, 2” flexible pipe per running mts, networking rack each / no 1 air conditioners for labs centralized ac with duct system each / no 1 projectors dell 1510x each / no 1 28 department of mechanical and smart manufacturing 1.metallurgical inverted microscope • type of product co axial research metallurgical microscope vision plus • magnification 40x–1000x • illumination incident light through epi – illuminator with field aperture diaphragm and filter slots. continuously variable luminosity control through built in electronic transformer. • focusing co–axial focusing module with slides travelling on bearing guide ways. • optical tube binocular • eye pieces quadruple revolving nosepiece for quick magnification change with positive click stops for proper centering. compensating high eye point wide field eyepiece 10x. • stages large graduated mechanical stage with low drive co – axial controls for x–y movements on the ball slides. • objectives achromatic flat – field metallurgical corrected and anti mount fungus m5x, m10x, m45x, & m100x ( oil ) . • filters green & blue. • focusing: co–axial focusing module with slides each / no 1 2.fatigue test specification ft 200 max. bending moment ( kg. cm ) 200 bending moment adjustable ( kg.cm ) 25 200 ranges : 1 kg.cm ii kg.cm 25 125 125 200 gripping dia of specimen ( mm ) = 12 testing dia of specimen ( mm ) = 8 rotating speed in rpm =4200 accuracy of applied bending moment =±1% mechanical counter: no. of digits multiplying factor= 63 power required in hp 0.5 main supply 3ph 440v 50hz overall size ( mm ) 1000l x 500w x 600h weight ( kg ) 120 each / no 1 29 manufacturing process lab 1 foundry and forging laboratory iii sem 1 universal strength testing machine & attachments sand testing equipments each / no 1 2 shear strength attachments sand testing equipments each / no 1 3 tensile strength attachments sand testing equipments each / no 1 4 permeability tester sand testing equipments each / no 1 5 corehardness tester sand testing equipments each / no 1 6 mouldhardness tester sand testing equipments each / no 1 7 sieve analysis test setup sand testing equipments each / no 1 8 clay content tester sand testing equipments each / no 1 9 sanddrier sand testing equipments each / no 1 10 moisture content tester sand testing equipments each / no 1 11 clay washer along with the accessories each / no 1 12 sand rammer sand testing equipments each / no 1 13 flatteners 2 moulding tools each / no 1 14 tongs 18 moulding tools each / no 1 15 ball peen hammer tools used for foundry and forging each / no 1 16 cross peen hammer tools used for foundry and forging each / no 1 17 wooden log 18x 24 tools used for foundry and forging each / no 1 18 g i buckets 15 liters tools used for foundry and forging each / no 1 19 surface block 18x 18 tools used for foundry and forging each / no 1 20 centrifugal blower tools used for foundry and forging each / no 1 21 power hammer tools used for foundry and forging each / no 1 22 omega lpg fire hearth furnace chamber type, robust heavy duty construction, lined with high density ceramic fiber modules and blankets. gas ( png / lpg ) , automatic operation with auto ignition and flame monitoring system. sealing of the vertical lift doors and bogie through pneumatically operated soft seal clamps to ensure no ingress of cold air. thermal calibration as per api standards. each / no 1 23 coal fired smithy furnace both fire & ordinary brick size 3”x3”x5.9” gratingsfired ( two side fire each furnace ) , blower with kirloskar motor with starter ( 5hp, 2800rpm ) , interconnecting pipe reducer 3 inch pipe each / no 1 24 mini cupola 5kgs, operating temp 1500 c, 6kw, 230volt / single phase, crucible, heating element: 80 / 20 nichrome wire, insulation: by brick or ceramic fibre each / no 1 25 first aid box safety tools each / no 1 26 aluminium melting furnace capacity 5 kgs, operating temp 1200 c, rating 4.5 kw, 230 volt / single phase crucible 5 kg, chamber: high alumina content grooved brick temperature control. heating each / no 1 27 empty metallic drums forging tools each / no 1 28 swage block 50kg castiron forging tools each / no 1 29 anvil 50kg castiron forging tools each / no 1 30 anvil 100kg cast iron forging tools each / no 1 31 round tong, flat tong, square tong & bent tong forging tools each / no 1 32 swages top & bottom ¼“ms handle forging tools each / no 1 33 fuller top & bottom ¼“ ms handle forging tools each / no 1 34 hammer 2lb double headed forging tools each / no 1 35 sledge hammer 8lb wooden handle forging tools each / no 1 36 shovels moulding tools each / no 1 37 flatters forging tools each / no 1 38 set hammers ¼“ ms handle forging tools each / no 1 39 poker forging tools each / no 1 40 hot chisel ¼“ ms handle forging tools each / no 1 41 cold chisel l¼“ mshandle forging tools each / no 1 42 punches ½ round forging tools each / no 1 43 punches ½ square forging tools each / no 1 44 green sand ( bentonite & coal dust mixed ) moulding tools each / no 1 45 silica sand ( bentonite & coal dust mixed ) moulding tools each / no 1 46 bentonite powder moulding tools each / no 1 47 coal dust moulding tools each / no 1 48 tool kit gi box: ( peen & round rammer, rectangular trowel, smoother 4, leaf trowel big & small, lifter, ventwire, sprue pin, cleaner, divider 6”, drawspike, steelrule ( 300mm ) forging tools each / no 1 49 moulding boxes ( 12”x12”x4” ) cope drag ms forging tools each / no 1 50 teak wood leveller ( 18”x2”x1½” ) forging tools each / no 1 51 dumble split pattern 9”x3” ( aluminium ) forging tools each / no 1 52 single piece pattern step pulley ( aluminium ) forging tools each / no 1 53 split pattern groove pulley ( aluminium ) forging tools each / no 1 54 shovel standard size forging tools each / no 1 55 match plate pattern 9”octogonal block forging tools each / no 1 56 pelton wheel cup ( aluminium ) forging tools each / no 1 57 bellow 1’ forging tools each / no 1 58 pentagonal block self cored ( aluminium ) forging tools each / no 1 59 hexagonal block self cored ( aluminium ) forging tools each / no 1 60 core box split ( 6”x4”x4”, 40mmhole ) aluminium forging tools each / no 1 61 crucible ( graphite 20kg capacity ) forging tools each / no 1 62 abc core oil forging tools each / no 1 63 steel rule forging tools each / no 1 30.manufacturing process lab ii – iv sem 1 tool and cutter grinder with attachments tool and cutter grinder: with all necessary attachments to grind all types of metals each / no 1 2 universal milling machine with complete accessories. [ hmt ] universal milling machine: with complete accessories. ( hmt ) each / no 1 3 radial drilling machine radial drilling machine: with complete accessories ( hmt ) each / no 1 4 heavy duty drilling machine heavy duty drilling machine: with complete accessories ( hmt ) each / no 1 5 high speed lathe high speed lathe: with complete accessories ( hmt ) each / no 1 6 surface grinding machine surface grinding machine with complete accessories each / no 1 7 power saw power saw : ( rolex 10 cap hilton ) each / no 1 8 rack driven planning machine rack driven planning machine: with complete accessories each / no 1 9 shaping machine shaping machine : with complete accessories ( 24” / 18” stroke ) each / no 1 10 belt driven slotting machine belt driven slotting machine: with complete accessories each / no 1 31.elements of mechanical engineering 1 sectional working model of 2 stroke petrol engine each / no 1 2 sectional working model of 4 stroke petrol engine each / no 1 3 francis turbine model each / no 1 4 pelton wheel turbine model each / no 1 5 kaplan turbine model each / no 1 6 centrifugal pump actual cut section each / no 1 7 vapor compression refrigeration system demo model each / no 1 8 vapor absorption refrigeration system demo model each / no 1 9 gear box demonstration model each / no 1 10 demo model of open and cross belt drives each / no 1 11 robot joints and links ( demo purpose ) each / no 1 12 air conditioning system ( demo model ) each / no 1 32.data structures lab equipments 1 desktop computer inspiron 24 5000 all in one desktop: 11th generation intel® core™ i3 1115g4 processor ( 6mb cache, up to 4.1 ghz ) , windows 10 home, english, intel® uhd graphics with shared graphics memory, 8gb, 8gbx1, ddr4, 2666mhz, 1tb 7200 rpm 2.5 sata hard drive, monitor 23.8 inch fhd ( 1920 x 1080 ) anti glare narrow border infinity non touch display, a frame stand, km636 wireless keyboard & mouse white, white fhd ir camera, intel® wi fi 6 2x2 ( gig+ ) and bluetooth 5.1, 90 watt ac adapter, power cord ( india ) each / no 1 2 operating system windows 7, 8, 8.1, 10, 11 pro each / no 1 3 software 1. eclipse: eclipse ide for c / c++ 2. turbo c: turbo c++ or c for windows 7, 8, 8.1 and 10 32 / 64 bit full screen 3. dev: dev c++ 4. codeblocks each / no 1 4 projectors: multimedia projectors hitachi multimedia projector with storage media port integrated in projector, resolution: 1024 x 768 xga, ansi, lumen:4000. each / no 1 5 antivirus software: mcfee software epo ( 40 user ) each / no 1 6 projector screens good quality each / no 1 7 laser printers hp laser jet pro m1210 multifunction printer series each / no 1 8 ups and batteries 10 kva – ups each / no 1 9 batteries rack capacity of 20 to 25 batteries each / no 1 10 laptop computer : 7th genration core i5 / i7, 8 gb ram, itb hod, 2gb graphics, 23.8 fhd windows 10 all in one desktop pc with wifi enabled each / no 1 33.computer aided machine drawing lab equipments 1 desktop computer inspiron 24 5000 all in one desktop: 11th generation intel® core™ i3 1115g4 processor ( 6mb cache, up to 4.1 ghz ) , windows 10 home, english, intel® uhd graphics with shared graphics memory, 8gb, 8gbx1, ddr4, 2666mhz, 1tb 7200 rpm 2.5 sata hard drive, monitor 23.8 inch fhd ( 1920 x 1080 ) anti glare narrow border infinity non touch display, a frame stand, km636 wireless keyboard & mouse white, white fhd ir camera, intel® wi fi 6 2x2 ( gig+ ) and bluetooth 5.1, 90 watt ac adapter, power cord ( india ) each / no 1 2 operating system windows 7, 8, 8.1, 10, 11 pro each / no 1 3 software solid edge software latest version ( 60 user license ) each / no 1 4 projectors: multimedia projectors hitachi multimedia projector with storage media port integrated in projector, resolution: 1024 x 768 xga, ansi, lumen:4000. each / no 1 5 antivirus software: mcfee software epo ( 40 user ) each / no 1 6 projector screens good quality each / no 1 7 laser printers laser jet pro m1210 multifunction printer series each / no 1 8 ups and batteries 10 kva – ups each / no 1 9 batteries rack capaeis of 20 to 25 batteries each / no 1 10 laptop computer : 7th genration core i5 / i7, 8 gb ram, itb hod, 2gb graphics, 23.8 fhd windows 10 all in one desktop pc with wifi enabled each / no 1...

Mysore Palace Board - Karnataka

29710951 supply of 15 watts 250 volts grade brass cap incandescent lamps suitable for ferry land base screw type holders to mysore palace, mysore ...

Mysore Palace Board - Karnataka

29126207 supply of 15 watts 250 volts grade brass cap incandescent lamps suitable for ferry land base screw type holders to mysore palace, mysore ...

Water Supply And Sanitation Department - Karnataka

28991444 supply of instruments and crms to channagiri taluk laboratory in channagiri taluk davangere 1 supply of digital water bath ( double walled consruction. outer mild sheet. powder coated, inner chamber of stan less steel. emp.is controlled by digital temp.controller cum indicator 99a / 1 l. fitted with on / off size: 300 x 250 x 100 min no.of holes : 6 holes capacity : approx 8 ltrs ) ( with caliberation certificate ) 2 supply of digital hot plate with temp controller ( mounted on thick ss sheet i3ody. a smooth surlace of stan less sieel p late fitetd with digital controlled pid operated elements. a three step rotory switch works on 220230v a.c ) ( with caliberation certificate ) 3 supply of f1 wieght box 1 mg to 200 gm ( capcity : i mg to 200gin with c lass e ( with nabl certified ) 4 supply of lux meter 0.1 to 200000 lux ( measuring range ; 0.1 lux to 200000 lux / 0.0 i fc to 20, 000 fc measuring range :200, 2, 000. 20.ot ) 0 and 200, 000 lux 20, 200.000. 20.000 fc + 3% rdg+ / _0.5%f.s ( calibrated to standard incandescent lamp at color temperature 2856 k ) 9v battery ) ( with caliberation certificate ) 5 supply of digital thermometer with temp probe ( digital lcd display, 3 1 / 2 lcd display, 50 c 1300 c + / 2 c ) ( with caliberation certificate ) 6 supply of ice box for carrying samples ( for carry about 20 cans. capacity 50 ltrs ) 7 supply of fuming cupboard ( fume hood ( l x bx h ) 3x2x2 feet in nci cham bcr m s powder coated sheer co vercd iith pp sheet mad worl table incl uded granite. exten it4r made up of m s ith powricr coated. 1. 1. 1 unai nation: fiuoresce tube ) ( with caliberation certificate ) 8 supply of sound level meter 130 db ( high performance compact and design 4: digit lcd 1 / 2 electer condenser microphone 30to 130d b a and c 0.1 db + / 1.5 db 31.5 hz to 8khz fast and slow, ol mark indication, 210 mm 55 mm 32 mm ) ( with caliberation certificate ) 9 supply of analytical wieghing balance ( capacity 1 mg to 200 gm with e1 class with nabl certified ) 10 supply of anti vibration table ( with 4 no antivibration pad heavy meatl stand with top granite finish. ) ( with caliberation certificate ) 11 supply of conductivity meter ( auto ranging for conductivity and tds measurements. 0 20.00, 2000.0, 20.00, ( 5 auto ranges ) cal: upto 3 points, with calibration certificate ) ( with caliberation certificate ) 12 supply of digital ph meter ( large backlight lcd display : 2.00 16.0 ph+ / 0.01 ph upto 3 points. ( with caliberation certificate ) 13 supply of double distillation unit ( double quartz distillation unit with auto cut off 1.5 lts / hr without softner. with softner 2ltr / hr. voltage:230 250 v @50hz, ) ( with caliberation certificate ) 14 supply of calcium carbonate ( caco3 ) salt ( 80 gm ) ( merk / sigma aldrich, nist traceable ) 15 supply of sulphate standard 1000 ppm ( 500 ml ) ( merk / sigma aldrich, nist traceable ) 16 supply of nitrate standard 1000 ppm ( 500 ml ) ( merk / sigma aldrich, nist traceable ) 17 supply of iron standard 1000 ppm ( 500 ml ) ( merk / sigma aldrich, nist traceable ) 18 supply of turbidity standard 400 ntu ( 500 ml ) ( merk / sigma aldrich, nist traceable ) 19 supply of color standard 500 hazen units ( 500 ml ) ( merk / sigma aldrich, nist traceable ) 20 supply of pottasium dichromate ( 80 gms ) ( merk / sigma aldrich, nist traceable ) 21 supply of copper sulphate ( 250 gms ) ( merk / sigma aldrich, nist traceable ) 22 supply of ph buffer 4.01 ( 500 ml ) ( merk / sigma aldrich, nist traceable ) 23 supply of ph buffer 7.01 ( 500 ml ) ( merk / sigma aldrich, nist traceable ) 24 supply of ph buffer 10.01 ( 500 ml ) ( merk / sigma aldrich, nist traceable ) 25 supply of conductivity standard ( 500 ml ) ( merk / sigma aldrich, nist traceable ) 26 supply of sodium carbonate ( 80 gms ) ( merk / sigma aldrich, nist traceable ) 27 supply of sodium chloride ( 80 gms ) ( merk / sigma aldrich, nist traceable ) 28 supply of flouride standard ( 500 ml ) ( merk / sigma aldrich, nist traceable ) ...

Indian Navy - Karnataka

28763066 21wlec001 procurement of electrical spares , procurement of electrical spares , 5 / 10 dia, led ( red / yellow / white / green ) , magazine light fitting ( 60w ) , mnx 13e , desk light decorative type with in built switch ( 20w ) , dimmer , 10a, 2pole, mcb , 63a, tp mcb , relays for drop in plate , 25 pin pcb serial , intercom system ( driver unit ) l8d 8308 m , incandescent light ftng wtrtight, marine wel glass ftng ( 60w ) , cctv cameras , 63a, 3pole, mcb , lamp holder , 6 / 16a socket 30828 , illuminated pb, red , 3 pole, 6a, on / off toggle switch , 24v dc buzzer , mnx a1 , mnx 32 coil voltage 240v ac with 3no+1no aux contacts , fuse type terminals with 1a fuse link glass type , 16 dia, led ( red ) , 6a, 2pole, mcb , hooter , extended rotary handle dm 100 extended , fuse3.15 a , hf fuse link 4a , fuse link 6a , junction box for tank & bilge level switches , mirror light ( 20w ) , lamp 24v / 40w , mccb 250a tp with 1 aux. with shunt trip , power factor 3ph, 3 wire, 1element415vac, size:96x96 , illuminated pb, green , illuminating push button, colour:red, 2nc element , indicating lamp, colour: green, input voltage: 240v ac, 50hz, le , 37 pin pcb system ip , 2 way water tight switch , fuse link 2a , mccb 50a , 15 pin pcb ao , 1 c / o relays , 2x18wfluorescent wtrtight, weatherprof tubelight ftg with grd , aldis lamp , 60w incandescent lamp , 20a hrc fuse base & carrier with 10a fuse link , indicating lamp colour: red, input voltage: 240v ac, 50hz, led , incandescent light ftg wtrtight bhd mount type with grd ( 60w ) , 1000w, remotly operated search light with control panel , 16a switches 21066 , optical smoke detector head sv, ip44d ( conduit box ) , hrc fuse, fuse link ( 4a ) , mccb 630a tp with1 aux. with sunt trip , mccb 100a , anchor light ( white ) , 125a hcos , hand changeover switch , ais gps antennaat575 68 ( 2gdb, tnc f ) , mccb 80a , mcb 3 pole 6a , power terminals suitable up to 70 sq.mm wire , mcb 3 pole 2a , power terminals suitable upto 4 sq.mm wire , led lamp ( green ) 12v dc , 240v ac, amber indicating lamp , mn 2 13 a to 19 a overload relay , mn 2 24 a to 32 a overload relay , sd timer 2asdt0 , led lamp ( red ) 12v dc , 16a, 2pole, mcb , 25a, 2pole, mcb , 2a, 1 way mcb, 2p , bulb ac 220v, 25 w , mcb 3 pole 10a , side light ( red ) , side light ( green ) ...

South Western Railway - Karnataka

28359824 supply of lamp holder porcelain edison screw type e 27.lamp holder porcelain edison screw type e 27., lamp holder porcelain edison screw type e 27, suitable for 110v, 25 / 40 watts incandescent lamps provided in 110 v, t l coaches, conforming to is:10276 1982 and cees drg. no: tl / ce / 1884....

Visvesvaraya Technological University - Karnataka

26184226 tender for supply of equipment to establishment electrical lab at vtu pg centre, belagavi and kalaburgi 1. verification of kcl and kvl for dc circuits readymade kit, 2. demonstration fuse and mcb separately by creating a fault, 3. resistive load 230v 1a each, 4. lamp led 230v 7w, 5. inductive load 1h 1a each, 6. measurement of three phase power using two walt method readymade kit, 7. variable power supply 0 30v 2a, 8. measurement of earth resistance readymade kit, 9. understanding dc and ac supply, use of testers and test lamp to ascertain the healthy status of mains, 10. flexible wires 5a, 11. determination of phase and line quantities in three phase star and delta connected loads readymade kit, 12. three phase auto transformer 0 415 v 5a, 13. resistive load 1000ohm 1a each, 14. fluorescent 230v 40w, 15. study of effect of open and short circuit in simple circuits readymade kit, 16. demonstration of cut out sections of electrical machines (dc machines, induction machines and synchronous machines), 17. two way and three way control of lamp and formation of truth table readymade kit, 18. capacitive load 1f 1a each, 19. ready lug wires 5ft each 10a, 20. ready patch chords 2ft, 21. three phase auto transformer 0 415 v 15a, 22. auto transformer 230v/0 300v 15a, 23. multi meter, 24. lamps incadaescent 230v 40w, 25. insulator tap, screw driver set, 26. resistive load 1000ohm 1a each, 27. knife switch 5a, 28. measurement of current, power and power factor incandescent lamp, fluorescent lamb and led lamp readymade kit, 29. wire stripper soldering set, 30. measurement of resistance and inductance of a choke coil using 3 voltmeter method read made kit, 31. led 230v 7w, 32. understanding of ups, ...

Karnataka Renewable Energy Development Limited - Karnataka

25791638 model energy efficient village campaign holalkere 1. supply, installation, wiring, testing and commissioning of new energy efficient 20 watts led tubes with required length of pvc flexible wire as per the technical specifications and operation & maintenance of lights for a period of three years. releasing of the existing fluorescent ( tube light ) lamp fixtures safely, packing in suitable card board boxes and handing over to the concerned authorities., 2. supply, installation, wiring, testing and commissioning of new energy efficient 33 watts bldc fan along with all the accessories such as capacitor, down rod, canopy, nut & bolts, connecting wires etc., as per the technical specifications and operation & maintenance of fans for a period of three years. releasing of the existing old ceiling fan safely, packing in suitable card board boxes and handing over to the concerned authorities., 3. supply, installation, wiring, testing and commissioning of new energy efficient 9 watts led bulb as per the technical specifications and operation & maintenance of lights for a period of three years. releasing of the existing cfl / incandescent lamp safely, packing in suitable card board boxes and handing over to the concerned authorities., 4. supply, installation, wiring, testing and commissioning of new energy efficient 80 watt led street light with complete fixtures, new brackets, clamps, bolt and nuts, tape, connector, wires and providing suitable capacity dp switch to control individual / group of lights wherever required as per the technical specifications and operation & maintenance of lights for a period of three years. releasing of the existing sodium vapour / mercury vapour street light fixtures safely, packing in suitable card board boxes and handing over to the concerned authorities., ...

Karnataka Renewable Energy Development Limited - Karnataka

25650552 energy efficient electrical gadgets at govt.scholols pavagada taluk 1. supply of energy efficient 9 watts led bulb for replacing the existing cfl / incandescent lamps as per the technical specifications., 2. installation, erection, wiring, testing and commissioning of new 20 watts led tubes fixtures as per the technical specifications and operation & maintenance of lights for a period of three years., 3. releasing of the existing old ceiling fans including the fan safely and packing in suitable card board boxes and handing over to concerned authorities., 4. installation, erection, wiring, testing and commissioning of new 24 watts led yard light fixtures as per technical specification and operation & maintenance of lights for a period of three years., 5. releasing of the existing fluorescent (tube light) lamp fixtures including the lamps safely and packing in suitable card board boxes and handing over to concerned authorities., 6. supply of energy efficient 20 watts led tubes with necessary required length of pvc flexible wire required for replacing the existing fluorescent (tube light) lamp fixtures as per the technical specifications., 7. supply of energy efficient 33 watts bldc fan along with all the required accessories such as capacitor, down rod, canopy, nut & bolts, connecting wires etc., for replacing the existing old ceiling fans as per the technical specifications., 8. releasing of the existing cfl /incandescent lamp including the lamps safely and packing in suitable card board boxes and handing over to concerned authorities., 9. supply of energy efficient 24 watts yard light with complete street light fixtures, new brackets, clamps, bolt and nuts, tapes, connectors, wires and providing suitable capacity dp switch to control individual / group of lights wherever required for replacing the existing sodium vapour lamps /mercury vapour fixtures as per the technical specifications., 10. installation, erection, wiring, testing and commissioning of new 9 watts led bulbs as per the technical specifications and operation & maintenance of the lamps for a period of three years., 11. releasing of the existing sodium vapour/ mercury vapour yard light fixtures including the lamps safely and packing in suitable card board boxes and handing over to concerned authorities., 12. installation, erection, wiring, testing and commissioning of new energy efficient 33 watts bldc fan as per the technical specifications and operation & maintenance of the fans for a period of three years., ...

Karnataka Renewable Energy Development Limited - Karnataka

25431967 energy efficient electrical gadgets at madhugiri hostels 1. installation, erection, wiring, testing and commissioning of new 24 watts led yard light fixtures as per technical specification and operation & maintenance of lights for a period of three years., 2. installation, erection, wiring, testing and commissioning of new 9 watts led bulbs as per the technical specifications and operation & maintenance of the lamps for a period of three years., 3. releasing of the existing cfl /incandescent lamp including the lamps safely and packing in suitable card board boxes and handing over to concerned authorities., 4. releasing of the existing sodium vapour/ mercury vapour yard light fixtures including the lamps safely and packing in suitable card board boxes and handing over to concerned authorities., 5. supply of energy efficient 33 watts bldc fan along with all the required accessories such as capacitor, down rod, canopy, nut & bolts, connecting wires etc., for replacing the existing old ceiling fans as per the technical specifications., 6. supply of energy efficient 20 watts led tubes with necessary required length of pvc flexible wire required for replacing the existing fluorescent (tube light) lamp fixtures as per the technical specifications., 7. supply of energy efficient 9 watts led bulb for replacing the existing cfl / incandescent lamps as per the technical specifications., 8. releasing of the existing fluorescent (tube light) lamp fixtures including the lamps safely and packing in suitable card board boxes and handing over to concerned authorities., 9. installation, erection, wiring, testing and commissioning of new energy efficient 33 watts bldc fan as per the technical specifications and operation & maintenance of the fans for a period of three years., 10. installation, erection, wiring, testing and commissioning of new 20 watts led tubes fixtures as per the technical specifications and operation & maintenance of lights for a period of three years., 11. releasing of the existing old ceiling fans including the fan safely and packing in suitable card board boxes and handing over to concerned authorities., 12. supply of energy efficient 24 watts yard light with complete street light fixtures, new brackets, clamps, bolt and nuts, tapes, connectors, wires and providing suitable capacity dp switch to control individual / group of lights wherever required for replacing the existing sodium vapour lamps /mercury vapour fixtures as per the technical specifications., ...

Karnataka Renewable Energy Development Limited - Karnataka

25368303 ee elec. gadgets veterinary college, hassan 1. installation, erection, wiring, testing and commissioning of new 9 watts led bulbs as per the technical specifications and operation & maintenance of the lamps for a period of three years., 2. installation, erection, wiring, testing and commissioning of new 100 watts led flood light fixtures as per technical specification and operation & maintenance of lights for a period of three years., 3. supply of energy efficient 20 watts led tubes with necessary required length of pvc flexible wire required for replacing the existing fluorescent (tube light) lamp fixtures as per the technical specifications., 4. supply of energy efficient 30 watts led lamps with complete street light fixtures, new brackets, clamps, bolt and nuts, tapes, connectors, wires and providing suitable capacity dp switch to control individual / group of street lights wherever required for replacing the existing sodium vapour lamps /mercury vapour fixtures as per the technical specifications., 5. releasing of the existing flood lamp fixtures including the lamps safely and packing in suitable card board boxes and handing over to concerned authorities., 6. releasing of the existing sodium vapour/ mercury vapour street lamp fixtures street fixtures including the lamps safely and packing in suitable card board boxes and handing over to concerned authorities., 7. releasing of the existing cfl /incandescent lamp including the lamps safely and packing in suitable card board boxes and handing over to concerned authorities., 8. installation, erection, wiring, testing and commissioning of new energy efficient 33 watts bldc fan as per the technical specifications and operation & maintenance of the fans for a period of three years., 9. installation, erection, wiring, testing and commissioning of new 30 watts led street light fixtures as per technical specification and operation & maintenance of lights for a period of three years., 10. releasing of the existing fluorescent (tube light) lamp fixtures including the lamps safely and packing in suitable card board boxes and handing over to concerned authorities., 11. supply of energy efficient 33 watts bldc fan along with all the required accessories such as capacitor, down rod, canopy, nut & bolts, connecting wires etc., for replacing the existing old ceiling fans as per the technical specifications., 12. supply of energy efficient 9 watts led bulb for replacing the existing cfl / incandescent lamps as per the technical specifications., 13. installation, erection, wiring, testing and commissioning of new 20 watts led tubes fixtures as per the technical specifications and operation & maintenance of lights for a period of three years., 14. releasing of the existing old ceiling fans including the fan safely and packing in suitable card board boxes and handing over to concerned authorities., 15. supply of energy efficient 100 watts led flood lamps with complete street light fixtures, new brackets, clamps, bolt and nuts, tapes, connectors, wires and providing suitable capacity dp switch to control individual / group of street lights wherever required for replacing the existing watts sodium vapour lamps /mercury vapour lamp fixtures as per the technical specifications., ...

Mysore Palace Board - Karnataka

25337437 supply of 15 watts 250 volts grade brass cap incandescent lamps suitable for ferry land base screw type holders to mysore palace, mysore ...

New Mangalore Port Trust - Karnataka

25021419 supply of electrical items , supply of electrical items , 06 amps sp mcb , 10 ka breaking capacity , 240/415 v ac conform to is: 8828 ( 96 ) and iec: 60898 i 2000 . make: abb/l&t/siemens/legrand/mds , electronic ignitors for 150/250/400w . hpsv st . lig , pvc casing &capping 1/2 size . , 36 watts c . f . lamp , 5amps two in one socket flush type anchor make , 400w hpsv choke , 150 watts ballasts for hpsv lamps , 150 watts h . p . s . v . lamp e type , pedestal fan , fiber blade , body metal blade sweep size 400mm , 3 blade , minimum motor speed 1200 1440 rpm , power consumption 70w 100w , number of speed setting minimum 3 . minimum 1 year warranty . make . bajaj , crompton , usha , almonard , havels , orient , 400 watts high pressure sodium vapour lamp tube type , wd 40 spray , 48 sweep ceiling fan , ( 1200mm ) sweep 3 blade , double ball bearing , 5 star rated ceiling fan , warranty minimum 1 year . make: usha , crompton , orient , bajaj , havels , wall mounting fan . fiber blade , metal/fiber body blade sweep size 300mm , 3 blade , minimum motor speed 1200 1440 rpm , power consumption 70w 100w , number of speed setting minimum 3 . minimum 1 year warranty . make . bajaj , crompton , usha , almonard , havels , orient , starter for tube light . 20 40 watts , 40 watts choke , energy meter 5 20 amps , 1ph , make: l&t/bhel/schneider electric/ge , carbon slippring brushes 20x16mm for 15hp rpm mtr , buzzer ding dong , 3/4pvc insulation tape adhersive steel grip , copper cable 1 . 5 sqmm 1 core , make: polycab/ rr/ finolex/ havels/universal ( 100 mts ) , 40 amps single pole ( s . p ) mcb , 10 ka breaking capacity , 240/415 v ac conform to is: 8828 ( 96 ) and iec: 60898 i 2000 . make: abb/l&t/siemens/legrand/mds , hss hacksaw blades , aluminium wire 6sq . mm pvc insulated , programable time switch with single dial series , analog version , supply voltage 240vac , frequency 50/60hz , accuracy +/ 1 . 5s/day at 20dege c , switching contact 1 c/o contact agcdo , resistance 16a @ 250vac , 0 . 25a @ 220v dc , inductive 8a @ 250vac , 0 . 1a @ 220vdc , incandescent lamp 1350w , shortest switching time daily 15 min , weekly 2hours . make:l&t/mds/gic , modular switch , 6 a , modular switch , 16 a , modular socket 6a , modular socket 16a , tube lamp side holder clip type , copper cable 2 . 5 sqmm 3 core , make: polycab/ rr/ finolex/ havels/universal , choke for cfl 2x36w , led tube light 4 ft ( only tube ) , make: surya/crompton/phillips/ bajaj/havel/hpl . minimum 1years warranty . , 18 watts cfl lamp 4 pin , led box type 4 industrial 1x16 20w fitting with tube , 20watts /minimum 1800 lumen , 5700 color temperature , make: surya/crompton/phillips/ bajaj/havel/hpl . minimum 2years warranty . ...

New Mangalore Port Trust - Karnataka

24909570 supply of electrical items 20 1 hpsv lamp 70watts, 250v, ip66, rated luminous flux, 5200 for 70 w lamp, marking as per cl. 5 of is: 9974 / 1981 part 1 latest, rated life of lamps, > / =5000 hours, make: bajaj / crompton / philips / surya / havels 2 3 / 4 pvc casing and caping, 3 150 watts h.p.s.v.lamp e type, e40 cap, screw, ip66, 14000 lumen, make: bajaj / crompton / philips / surya / havels 4 pedestal fan, blade sweep size 400mm, fiber blade, metal body, 3 blade, minimum motor speed 1200 1440rpm, power consumption 60 100w, number of speed setting minimum 3.minimum 1 year warranty. make. bajaj, crompton, usha, almonard, havels, orpat. 5 40 amps douple pole ( d.p ) mcb, 10 ka breaking capacity, 240 / 415 v ac conform to is: 8828 ( 96 ) and iec: 60898 i 2000. make: abb / l&t / siemens / legrand / mds 6 switch 15amps flush type 7 elc buzzer. 250v / 230 v ac 8 48 sweep ceiling fan, ( 1200mm ) sweep 3 blade, double ball bearing, 5 star rated ceiling fan, warranty minimum 1 year. make: usha, crompton, orient, bajaj, havels 9 starter for tube light. 20 40 watts, starter make make: bajaj / crompton / philips / surya / havels 10 40 watts choke, make: bajaj / crompton / philips / surya / havels 11 fan regulator 48 make: bajaj / crompton / philips / surya / havels 12 digital energy meter 5 20 amps, make: l&t / bhel / schneider electric / ge 13 3 / 4pvc insulation tape adhersive steel grip 14 16 amps single pole ( s.p ) mcb, make:abb / l&t / siemens / legrand / mds 15 programable time switch with single dial series, analog version, supply voltage 240vac, frequency 50 / 60hz, accuracy + / 1.5s / day at 20dege c, switching contact 1 c / o contact agcdo, resistance 16a @ 250vac, 0.25a @ 220v dc, inductive 8a 250vac, 0.1a @ 220vdc, incandescent lamp 1350w, shortest switching time daily 15 min, weekly 2hours. make: l&t / mds / gic 16 aluminium wire 10sqmm 17 pvc insulated and alu cable 2.5 sq .mm, make: polycab / rr / finolex / havels / universal 18 led tube light 4 ft, led tube light ( only tube ) , 18watts / 1800 lumen, 5700 color temperature, with minimum 2years warranty. make: surya / crompton / phillips / bajaj / havel / hpl. 19 led box type 4 industrial 1x16 20w fitting with led tube, 20watts / minimum 1800 lumen, 5700 color temperature, minimum 2years warranty. make: surya / crompton / phillips / bajaj / havel / hpl....

Council Of Scientific And Industrial Research - Karnataka

23762858 supply of electrical items led lights , fittings , lamps , etc . 1 18w / 22w, t8 retro indoor led tubes of length 1200mm, high quality aluminium housing and pc diffuser for led linear lamp ensure soft and glare free lighting, led tube color shall be cool day white light, color temperature 6000 6500k and light output 2000lumens and color rendering index of >86 . the led tubes shall be suitable for fixing of existing conventional tube light / mirror optic luminaries. suitable on operation of 230 volts, 50 hz power supply of make: philips / cg / jaguar / hpl / rr electric 2 18 / 23w, led cool white surface mounting square panel with aluminium die cast housing including control drives etc., . suitable for operation on 230v ac supply of make: philips 3 15w, round led down light with aluminium die cast housing the cutout shall be 155mm dia the necessary fixing clamps for suitable for false ceiling including control drives etc., . suitable for operation on 230v ac supply of make: jaguar / hpl / philips / cg / rr electric 4 12w / 15w, led cool white surface mounting square panel with aluminium die cast housing including control drives etc., . suitable for operation on 230v ac supply of make: jaguar / philips / cg / rr electric 5 30w led lensed type street light pressure die cast aluminium housing, heat resistant control driver, toughened glass with frame, ip66 protection, better optics for uniform distribution the fixing clamps shall not less than 50mm. suitable for 230v, ac supply of make: philips / jaguar / hpl / cg / rrelectric 6 60w led lensed type street light pressure die cast aluminium housing, heat resistant control driver, toughened glass with frame, ip66 protection, better optics for uniform distribution the fixing clamps shall not less than 50mm. suitable for 230v, ac supply of make: philips / jaguar / hpl / cg / rrelectric 7 120w led flood light lensed type with high grade aluminium pressure die cast cover toughened glass, lamp efficiency 120 lumen / watt, optics high spread using high quality lenses and reflector, wide beam angle 120°, multiple leds are used in series parallel array to form cob. control gear cc control drive with efficiency 85% led life with l70 criterion 50, 000 operating hours, over voltage protection up to 300v, surge protection 4kv, isolation up to 1.5kv, short circuit protection and open circuit protection fixture and led conform to lm 79 & lm 80 respectively. suitable for 230v, ac supply of cat hplledfl12060s of make: hpl or eqvt in crompton greaves / bajaj / philips / jaguar / rr electric 8 150w led flood light lensed type with high grade aluminium pressure die cast cover toughened glass, lamp efficiency 120 lumen / watt, optics high spread using high quality lenses and reflector, wide beam angle 120° deg, multiple leds are used in series parallel array, control gear cc control drive with efficiency 90% led life with l70 criterion 50, 000 operating hours, over voltage protection up to 300v, surge protection 4kv, isolation up to 1.5kv, short circuit protection and open circuit protection fixture and led conform to lm 79 & lm 80 respectively. suitable for 230v, ac supply of cat ref: hplledfl15060d of make: hpl or eqvt in crompton greaves / bajaj / philips / jaguar / rr electric 9 100w led lensed type high bay luminaries with high grade aluminium pressure die cast cover toughened glass, lamp efficiency 120 lumen / watt, optics high spread using high quality lenses and reflector, wide beam angle 120°, multiple leds with efficiency 85% led life with l70 criterion 50, 000 operating hours, thd less than 5%, over voltage protection up to 300v, surge protection 4kv, isolation up to 1.5kv, short circuit protection, heavy duty heat shink and open circuit protection fixture etc., and led conform to lm 79 & lm 80 respectively. suitable for 230v, ac supply of make: hpl / philips / cg / jaquar / acr 10 200w led lensed type high bay luminaries with high grade aluminium pressure die cast cover toughened glass, lamp efficiency 120 lumen / watt, optics high spread using high quality lenses and reflector, wide beam angle 120°, multiple leds with efficiency 85% led life with l70 criterion 50, 000 operating hours, thd less than 5%, over voltage protection up to 300v, surge protection 4kv, isolation up to 1.5kv, short circuit protection and open circuit protection fixture and led conform to lm 79 & lm 80 respectively. suitable for 230v, ac supply of make: of make: hpl / philips / cg / jaquar / acr. 11 36 watt fluorescent tube light with color cool day light 6000 k and lumen output of 3250 lumens and color rendering index of 86 suitable on operation of 230 volts, 50 hz power supply of make: philips / cg / osram. 12 36 watt fluorescent warm tube light 3000 k colour temperature and lumen output of 2400 lumens and color rendering index of 80 suitable on operation of 230 volts, 50 hz power supply of make: philips / cg / osram. 13 14w, 2feet , tl 5 type warm white tube light cat ref: tl 5 14w of make : philips 14 14w, 2feet , tl 5 type cool day tube light cat ref: tl 5 14w of make : philips 15 12w constant current led driver input voltage 230v, i / p current 75ma, pf 0.95 athd < 10% operating temperature e 10 to 70ºc output voltage 28v 40 v dc, o / p current 300ma number of channel single suitable for 12w, led square panelt luminare of make: rr electric / bajaj 16 36w constant current led driver input voltage 230v, i / p current 155ma, pf 0.95 athd < 10% operating temperature 10 to 70ºc output voltage 60 80v dc, o / p current 700ma number of channel single suitable for 12w, led square panelt luminare of make: rr electric / bajaj 17 90w constant current led driver input voltage 230v, i / p current 300ma, pf 0.95 athd < 10% operating temperaturee 10 to 70ºc degree c output voltage 36v dc, o / p current 2.4a number of channel single suitable for 90w, led street light luminare of make: bajaj 18 60w, constant current led driver input voltage 230v, i / p current 300ma, pf 0.95 athd < 10% operating temperature 10 to 70ºcdegree c output voltage 36v dc, o / p current 2.4a number of channel single suitable for 90w, led street light luminare of make: hpl 19 200w constant current led driver input voltage 230v, i / p current 1.6a, pf 0.95 athd < 10% operating temperature 25 to + 70 degree c output voltage 12v dc, o / p current 16.67a number of channel single suitable for 200w, rain proof signage board led make: ads or equivalent 20 10kv surge protector , continious voltage 280v, i / p current 16a ( fussed ) pf 0.95 rated frequency 48hz to 62hz max. peak fault current 10ka single channel suitable for street 200w, led street light luminariese: bajaj / ads / hpl 21 4x14w electronic ballast thd shall be >10% suitable for 4x14w tl 5 luminaries and operation 230v, 50hz ac supply, of make: philips 22 2x36w electronic ballast thd shall be >10% suitable for 2x36w ftl luminaries and operation 230v, 50hz ac supply, of make: philips 23 1x36w electronic ballast thd shall be >10% suitable for 1x36w ftl luminaries and operation 230v, 50hz ac supply, of make: philips 24 9w led lamp / bulb, bc type in build driver of suitable on operation of 230 volts, 50 hz power supply of make: philips 25 36w copper choke, open type vpit suitable for 1x36w tl fitting, make: philips / crompton greaves 26 36 / 40w tube light starter suitable for 36 / 40w florcent lamp of make : philips / cg 27 40w, incandescent lamp bc type of make: philips / osram / cg 28 60w, incandescent lamp bc type of make: philips / osram / cg 29 sub total:ex works price 30 less: discount ( if any ) 31 sub total: 32 less: buy back price ( if any ) 33 sub total:net ex works price 34 add: packing & forwarding charges ( if any ) 35 add: transportation charges ( if any ) 36 add: insurance charges ( from warehouse to warehouse ) ( if any ) 37 total ( a ) : 38 installation & commissioning charges ( if any ) 39 training charges ( if any ) 40 total ( b ) : 41 bank charges, if any 42 any other charges, if any 43 total ( c ) : 44 amc charges for 1st year 45 amc charges for 2nd year 46 amc charges for 3rd year...

Medical Education Department - Karnataka

23163801 rate contract of electrical items to kidwai memorial institute of oncology, bangalore 1. supplying of extension electrical boards with teak wooden boxes with pvc plate of size 12”x9” one 16 amps socket and 32 amps flush type dp , 6 amps 3 no,s of sockets and 6 amps switches( 3no,s) with 1.5 sqmm 3 core copper cable, 2. supplying of extension electrical boards with teak wooden boxes with pvc plate of size “10x7” one 16 amps socket and 32 amps flush type dp , 6 amps 4 no,s of sockets and 6 amps switches 4 no,s with 1.5 sqmm 3 core copper cable, 3. supplying 4 mm thick plastic sheet with necessary nitches for fixing switches, regulators etc.. and fixing on existing wooden or metal box using nf screws pg 17 item 3.9, 4. point wiring using copper wire with switch : supplying and wiring adopting loop system in existing pvc conduit /casing capping using copper pvc insulated multistrand 2x 1.5 sqmm copper wire with a 6 amps flush type sp control switch shall be fixed on the existing plastic sheet /gang box ,the other end of the wires shall be terminated with sufficient loose length in a wood /pvc round block complete for each outlet pg 5 item 2.1 2.1.2 2.1.2 medium point above 3 mtr upto 6 mtr from tapping point to outlet via switch, 5. supplying and fixing of pvc casing and capping on the wall oe r ceiling using necessary materials like bends , screws at an interval of 300mm …etc as required pg 3 item 1.8.1 20 mm, 6. supplying and fixing of pvc casing and capping on the wall oe r ceiling using necessary materials like bends , screws at an interval of 300mm …etc as required pg 3 item 1.8.2 25 mm, 7. supplying and fixing of pvc casing and capping on the wall oe r ceiling using necessary materials like bends , screws at an interval of 300mm …etc as required pg 3 item 1.8. 3 32 mm, 8. supplying and fixing of pvc casing and capping on the wall oe r ceiling using necessary materials like bends , screws at an interval of 300mm …etc as required pg 3 item 1.8. 4 38 mm, 9. supplying and fixing of pvc casing and capping on the wall oe r ceiling using necessary materials like bends , screws at an interval of 300mm …etc as required pg 3 item 1.8. 5 50 mm, 10. supplying and fixing of pvc casing and capping on the wall or ceiling using necessary materials like bends , screws at an interval of 300mm …etc 50x100 mm industrial type, 11. supplying and fixing of s” hook made out of 14,mm dia, 12. providing open conduit system supplying and drawing heavy gauze pvc conduit pipes25 mm dia 2 mmthick conforming to is 2509 with suitable size bends , junction boxes, adhesive paste etc.., 13. providing open conduit system supplying and drawing heavy gauze pvc conduit pipes32 mm dia 2.5 mmthick conforming to is 2509 with suitable size bends , junction boxes, adhesive paste etc.., 14. providing open conduit system supplying and drawing heavy gauze pvc conduit pipes40 mm dia 2.5 mmthick conforming to is 2509 with suitable size bends , junction boxes, adhesive paste etc.., 15. supplying and drawing heavy duty 2 inch pvc pipe thickness 3mm, 16. supplying and drawing heavy duty 2.5 inch pvc pipe thickness 3.25mm, 17. supplying and drawing heavy duty 2.5 inch pvc pipe thickness 3.5mm, 18. providing groove cutting in the wall and fixing by bracing u or j hooks and cement plastering up to the wall surface and run with 18 swg fish wire run throught the conduit wherever necessary including supplying and fixing of heavy gauge pvc conduit pipe 19/20 mm dia 2 mm thick, 19. providing groove cutting in the wall and fixing by bracing u or j hooks and cement plastering up to the wall surface and run with 18 swg fish wire run throught the conduit wherever necessary including supplying and fixing of heavy gauge pvc conduit pipe 25 mm dia 2 mm thick, 20. providing groove cutting in the wall and fixing by bracing u or j hooks and cement plastering up to the wall surface and run with 18 swg fish wire run throught the conduit wherever necessary including supplying and fixing of heavy gauge pvc conduit pipe 32 mm dia 2.5 mm thick, 21. providing groove cutting in the wall and fixing by bracing u or j hooks and cement plastering up to the wall surface and run with 18 swg fish wire run throught the conduit wherever necessary including supplying and fixing of heavy gauge pvc conduit pipe 40mm dia 2.5 mm thick, 22. providing concealed system supplying heavy gauze pvc conduit pipe 19/20mm dia 2 mm thick conforming to is 2509 with suitable size bends , metal / pvc junction boxes , adhesive paste etc.. and renning before concreting the slab. the conduit shall be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using pvc end enclosures , run with 18 swg gi fish wire wherever necessary, 23. providing concealed system supplying heavy gauze pvc conduit pipe 25mm dia 2 mm thick conforming to is 2509 with suitable size bends , metal / pvc junction boxes , adhesive paste etc.. and renning before concreting the slab. the conduit shall be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using pvc end enclosures , run with 18 swg gi fish wire wherever necessary, 24. providing concealed system supplying heavy gauze pvc conduit pipe 32mm dia 2.5 mm thick conforming to is 2509 with suitable size bends , metal / pvc junction boxes , adhesive paste etc.. and renning before concreting the slab. the conduit shall be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using pvc end enclosures , run with 18 swg gi fish wire wherever necessary, 25. providing concealed system supplying heavy gauze pvc conduit pipe 40mm dia 2.5 mm thick conforming to is 2509 with suitable size bends , metal / pvc junction boxes , adhesive paste etc.. and renning before concreting the slab. the conduit shall be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using pvc end enclosures , run with 18 swg gi fish wire wherever necessary, 26. supply and fixing /replacing of 6/16/32 amps electrical accessories on existing switch board pg 18 item 3.15 group a 3.15.1 6 amps sp switch, 27. supply and fixing /replacing of 6/16/32 amps electrical accessories on existing switch board pg 18 item 3.15 group a 3.15.3 6 amps 3 way 5 pin socket, 28. supply and fixing /replacing of 6/16/32 amps electrical accessories on existing switch board pg 18 item 3.15 group a 3.15.10 16 amps 3 way 5 pin socket, 29. supply and fixing of bakelite d.p/socket/switch with /without neon indicator over existing wood board or flush mounting in plastic / nitches as per is 1293 and is 3854 pg 15 item 3.3 group a 3.3.1 32 amps flush/projected type dp switc, 30. supply and fixing of bakelite d.p/socket/switch with /without neon indicator over existing wood board or flush mounting in plastic / nitches as per is 1293 and is 3854 pg 15 item 3.3group a 3.3.5 electronic stepped regulator, 31. wiring for lighting /power circuit using one of frls pvc insulated 1100 v gradw multistrand copper with low conductor resistance single core in open or concealed system of wiring with specified is 694:1990 and conforming to gtp of group a pg 6 item sl no 2.5 2.5.1 1 sqmm, 32. wiring for lighting /power circuit using one of frls pvc insulated 1100 v gradw multistrand copper with low conductor resistance single core in open or concealed system of wiring with specified is 694:1990 and conforming to gtp of group a pg 6 item sl no 2.5 2.5.2 1.5 sqmm, 33. wiring for lighting /power circuit using one of frls pvc insulated 1100 v gradw multistrand copper with low conductor resistance single core in open or concealed system of wiring with specified is 694:1990 and conforming to gtp of group a pg 6 item sl no 2.5 2.5.3 2.5 sqmm, 34. wiring for lighting /power circuit using one of frls pvc insulated 1100 v gradw multistrand copper with low conductor resistance single core in open or concealed system of wiring with specified is 694:1990 and conforming to gtp of group a pg 6 item sl no 2.5 2.5.4 4 sqmm, 35. wiring for lighting /power circuit using one of frls pvc insulated 1100 v gradw multistrand copper with low conductor resistance single core in open or concealed system of wiring with specified is 694:1990 and conforming to gtp of group a pg 6 item sl no 2.5 2.5.5 6 sqmm, 36. wiring for lighting /power circuit using one of frls pvc insulated 1100 v gradw multistrand copper with low conductor resistance single core in open or concealed system of wiring with specified is 694:1990 and conforming to gtp of group a pg 6 item sl no 2.5 2.5.6 10 sqmm, 37. wiring for lighting /power circuit using one of frls pvc insulated 1100 v gradw multistrand copper with low conductor resistance single core in open or concealed system of wiring with specified is 694:1990 and conforming to gtp of group a pg 6 item sl no 2.5 2.5.7 16 sqmm, 38. wiring for lighting /power circuit using one of frls pvc insulated 1100 v gradw multistrand copper with low conductor resistance single core in open or concealed system of wiring with specified is 694:1990 and conforming to gtp of group a pg 6 item sl no 2.5 25 sqmm, 39. wiring for lighting /power circuit using one of frls pvc insulated 1100 v gradw multistrand copper with low conductor resistance single core in open or concealed system of wiring with specified is 694:1990 and conforming to gtp of group a pg 6 item sl no 2.5 50 sqmm, 40. wiring for lighting /power circuit using one of frls pvc insulated 1100 v gradw multistrand copper with low conductor resistance single core in open or concealed system of wiring with specified is 694:1990 and conforming to gtp of group a pg 6 item sl no 2.5 2.5.7 100 sqmm, 41. wiring for lighting /power circuit using one of frls pvc insulated 1100 v gradw multistrand copper with low conductor resistance single core in open or concealed system of wiring with specified is 694:1990 and conforming to gtp of group a pg 6 item sl no 2. 2.5.7 150 sqmm, 42. supplying capacitor type ceiling fan complete with down rod blades,shackle,canopies etc… for operation on 230 volts 50 cycles.single phase ac supply conforming to iss 374 1979 and with double ball bearing system and as per technical data approved pg 78 sl no 9.3 sl no 9.3.1 48” sweep(1200mm) sl no 9.3.1.1 regular model, 43. fixing a ceiling fan /wall monting fan of all capacities and all types with necessary clamps and s” hook made out of 15mm dia ms rod with 5 amps ceiling rose of approved quality with necessary length of 23/0.0076” inch pvc insulated twin twisted wire od approved quality . mounted on a suitable size wooden board and wired pg 109 item 17.9, 44. fabricating supplying and mounting ms box made out … swg suitable for floor/wall mounting , fully weather proof with provision for better heat dissipation , provided with hinged front cover , equipped with tamper proof locking arrangements , with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 2 coats of red oxide primer paint and finally finished with approved colour enameled metal paint etc.. complete pg 49 item 6.40, 6.40.2 6.40.2 16 swg, 45. supplying and fixing moulded circuit breaker (mccb) over existing wood panel board using necessary screws,bolts, nuts and wiring complete .protection of over load and short circuit with thermal magnetic/micrpprocessed release and earth fault as per (is 13947 pg 46 item 6.13 four pole 6.13.8 four pole 6.13.6 100 amps 25 ka, 46. supplying and fixing moulded circuit breaker (mccb) over existing wood panel board using necessary screws,bolts, nuts and wiring complete .protection of over load and short circuit with thermal magnetic/micrpprocessed release and earth fault as per (is 13947 pg 46 item 6.13 four pole 6.13.8 four pole 6.13.7 125 160 amps 25 ka, 47. supplying and fixing moulded circuit breaker (mccb) over existing wood panel board using necessary screws,bolts, nuts and wiring complete .protection of over load and short circuit with thermal magnetic/micrpprocessed release and earth fault as per (is 13947 pg 46 item 6.13 four pole 6.13.8 four pole 6.13.8 200 amps 35 ka, 48. supplying and fixing moulded circuit breaker (mccb) over existing wood panel board using necessary screws,bolts, nuts and wiring complete.protection of over load and short circuit with thermal magnetic/micrpprocessed release and earth fault as per (is 13947 pg 46 item 6.13 four pole 6.13.8 four pole 6.13.9 250 amps 35 ka, 49. supplying and fixing moulded circuit breaker (mccb) over existing wood panel board using necessary screws,bolts, nuts and wiring complete .protection of over load and short circuit with thermal magnetic/micrpprocessed release and earth fault as per (is 13947 pg 46 item 6.13 four pole 6.13.8 four pole 6.13.10 320 400 amps 50 ka, 50. supplying and fixing moulded circuit breaker (mccb) over existing wood panel board using necessary screws,bolts, nuts and wiring complete .protection of over load and short circuit with thermal magnetic/micrpprocessed release and earth fault as per (is 13947 pg 46 item 6.13 four pole 6.13.8 four pole 6.13.10 630 amps 50 ka, 51. supplying and fixing moulded circuit breaker (mccb) over existing wood panel board using necessary screws,bolts, nuts and wiring complete .protection of over load and short circuit with thermal magnetic/micrpprocessed release and earth fault as per (is 13947 pg 46 item 6.13 four pole 6.13.8 four pole 6.13.10 700 800 amps 50 ka, 52. supplying and fixing of air circuit breakers 4pole( acb.s) manual operable make :l&t, c&s . schenider or abb, 53. supplying and fixing of air circuit breakers 3pole( acb.s) manual operable make :l&t, c&s , schenider or abb, 54. supplying and fixing of 1 od for rmu( vcb,s) 630 amps, 55. supplying and fixing of 1 vl for rmu, 630 amps, 56. cleaning of ht yard by removing the vegetation, 57. providing painting for ht substation( alluminium painting including all labour charges, 58. providing painting for 500 kva transformers, 59. providing painting of lt distribution boards( spray painting), 60. filtering of oil in the transformer at the transformer centre by hot process using steam line filter “ such time the dielectric strength of the oil in the transformer conforms to isi specifications (test certificates to produced), 61. supplying and fixing of 19mm dia 2mm wall thickness 15 kv class alkathine pipe to bus bar leads etc.. at substation, 62. supplying and fixing of 25mm dia 2mm wall thickness 15 kv class alkathine pipe to bus bar leads etc.. at substation, 63. supplying and topping of oil for di electric strength (bdv) acidity, 64. supplying and topping –up of new transil oil, 65. supplying and filling fresh silica gel to the breathe of the transformers, 66. providing megger test for the earth pits at the electrical substation, 67. supplying and fixing of nuts and bolts for the earth pits at the electrical substation and other areas, 68. supplying and pouring salt for earth pits 25 kg bags, 69. supplying and pouring the charcoal 25 kgs bags, 70. re construction of earth pit chambers , labelling and covering the earth pits with cast iron cover 400x400x400 mm, 71. providing calibration services for all the energy metres /ct,s of dg sets, 72. providing megger test results for the damaged cables to detect the damagof lt cable, 73. providing megger test results for the damaged cables to detect the damage of ht ug cable, 74. submission of compliance report to electrical inspectorate against the observations made by the electrical inspectorate( except statutory fees), 75. providing re winding for copper wound transformer including releasing and re fixing with all lead and lift including providing crane services and providing mgger test etc.., 76. supplying and installtion of 10 hp kirloskar make monoblock water supply motors, 77. supplying and installtion of 5 hp kirloskar make monoblock water supply motors, 78. supplying of 1 hp single phase motor of kirloskar make, 79. supplying of non return vales for water supply 50 mm, 80. supplying of foot valve set for 1 hp chiller pump, 81. supplying of 5 hp submersible pump motrs( 2no,s) kirloskar make/ atlanta/ texmo with adelivery point is about 30 mtrs height for dharmasahala pump house including supplying and fixing automatic starter panel with selctor switch type change over so that one motor shall operate at a time including supplying and drawing 2 .5 inch cpvc pipe , automatic starter control panel , mccb 100 amps and mcb 3 ploe 32 amps and contactor 40 amps and plumbimg works incuding supplying and fixing of non return vales 4 no,s of 50mm and gate valves of heavy duty 2 no,s) of required size etc.. with a automatic water controller facility by supplying and drawing ofc cable of about 175 for providing water supply to ot block, 82. supplying of 10 hp submersible pump motrs( 2no,s) kirloskar make/ atlanta/ texmo with adelivery point is about 30 mtrs height for dharmasahala pump house including supplying and fixing automatic starter panel with selctor switch type change over so that one motor shall operate at a time including supplying and drawing 2 .5 inch cpvc pipe , automatic starter control panel , mccb 100 amps and mcb 3 ploe 32 amps and contactor 40 amps and plumbimg works incuding supplying and fixing of non return vales 4 no,s of 65mm and gate valves of heavy duty 2 no,s) of required size etc.., 83. supplying fixing and wiring earth electrode for grounding of lifts transformers ,dg sets etc.. using 40mm dia 2.9 mm thick 2.5 mtr long gi pipe with gi funnel with mesh and suitable size reducer fixed on the top of the earth electrode .the funnel should be enclosed in a cc chamber of 400x 400x 400mm with a cast iron cover .the earth electrode shall have staggered holes of 12mm dia and the electrode should be covered 150mm alround with alternate layers of salt and charcoal from the bottom of the cc chamber.the connection from the electrode is to be established through gi strip using gi bolts and nuts pg 55 item 7.2, 84. supplying and running of gi/copper strips for grounding connections,using `1necessary fixing materials as required pg 55 item 7.3 gi strip 7.3.1 25 x3mm, 85. supplying and running of gi/copper strips for grounding connections,using `1necessary fixing materials as required pg 55 item 7.3 gi strip 7.3.2 25 x6mm, 86. supplying and running of gi/copper strips for grounding connections,using `1necessary fixing materials as required pg 55 item 7.3 gi strip 7.3.3 40 x6mm, 87. supplying and running of gi/copper strips for grounding connections,using `1necessary fixing materials as required pg 55 item 7.3 gi strip 7.3.5 600x600x3mm gi plate, 88. supplying and running of gi/copper strips for grounding connections,using `1necessary fixing materials as required pg 55 item 7.3 copper strip 7.3.6 25 x3mm, 89. supplying and running of gi/copper strips for grounding connections,using `1necessary fixing materials as required pg 55 item 7.3 copper strip 7.3.7 25 x6mm, 90. supplying and running of gi/copper strips for grounding connections,using `1necessary fixing materials as required pg 55 item 7.3 copper strip 7.933.8 40 x6mm, 91. supplying and running of gi/copper strips for grounding connections,using `1necessary fixing materials as required pg 55 item 7.3 copper strip 7.3.10 600x600x3mm plate, 92. supplying of 1.1 kv lt ug cable having aluminium conductor pvc insulated,extruded inner sheathed sheathed,galvanised ,strips (except 2cx10 sqmm wire armoured) asper is 3975:1990 & extruded pvcouter sheathed armoured cable as per is 1554 pare 1:1998 & confirming to gtp of group a pg 55 & 56 item 7.4 7.4.1 2 core 10 sqmm, 93. supplying of 1.1 kv lt ug cable having aluminium conductor pvc insulated,extruded inner sheathed sheathed,galvanised ,strips (except 2cx10 sqmm wire armoured) asper is 3975:1990 & extruded pvcouter sheathed armoured cable as per is 1554 pare 1:1998 & confirming to gtp of group a pg 55 & 56 item 7.4 7.4.2 4 core 10 sqmm, 94. supplying of 1.1 kv lt ug cable having aluminium conductor pvc insulated,extruded inner sheathed sheathed,galvanised ,strips (except 2cx10 sqmm wire armoured) asper is 3975:1990 & extruded pvcouter sheathed armoured cable as per is 1554 pare 1:1998 & confirming to gtp of group a pg 55 & 56 item 7.4 7.4.3 2 core 16 sqmm, 95. supplying of 1.1 kv lt ug cable having aluminium conductor pvc insulated,extruded inner sheathed sheathed,galvanised ,strips (except 2cx10 sqmm wire armoured) asper is 3975:1990 & extruded pvcouter sheathed armoured cable as per is 1554 pare 1:1998 & confirming to gtp of group a pg 55 & 56 item 7.4 7.4.4 4 core 16 sqmm, 96. supplying of 1.1 kv lt ug cable having aluminium conductor pvc insulated,extruded inner sheathed sheathed,galvanised ,strips (except 2cx10 sqmm wire armoured) asper is 3975:1990 & extruded pvcouter sheathed armoured cable as per is 1554 pare 1:1998 & confirming to gtp of group a pg 55 & 56 item 7.4 7.4.5 3.5 core 25 sqmm, 97. supplying of 1.1 kv lt ug cable having aluminium conductor pvc insulated,extruded inner sheathed sheathed,galvanised ,strips (except 2cx10 sqmm wire armoured) asper is 3975:1990 & extruded pvcouter sheathed armoured cable as per is 1554 pare 1:1998 & confirming to gtp of group a pg 55 & 56 item 7.4 7.4.6 3.5 core 35 sqmm, 98. supplying of 1.1 kv lt ug cable having aluminium conductor pvc insulated,extruded inner sheathed sheathed,galvanised ,strips (except 2cx10 sqmm wire armoured) asper is 3975:1990 & extruded pvcouter sheathed armoured cable as per is 1554 pare 1:1998 & confirming to gtp of group a pg 55 & 56 item 7.4 7.4.7 3.5 core 50 sqmm, 99. supplying of 1.1 kv lt ug cable having aluminium conductor pvc insulated,extruded inner sheathed sheathed,galvanised ,strips (except 2cx10 sqmm wire armoured) asper is 3975:1990 & extruded pvcouter sheathed armoured cable as per is 1554 pare 1:1998 & confirming to gtp of group a pg 55 & 56 item 7.4 7.4.8 3.5 core 70 sqmm, 100. supplying of 1.1 kv lt ug cable having aluminium conductor pvc insulated,extruded inner sheathed sheathed,galvanised ,strips (except 2cx10 sqmm wire armoured) asper is 3975:1990 & extruded pvcouter sheathed armoured cable as per is 1554 pare 1:1998 & confirming to gtp of group –a pg 55 & 56 item 7.4 7.4.9 3.5 core 95 sqmm, 101. supplying of 1.1 kv lt ug cable having aluminium conductor pvc insulated,extruded inner sheathed sheathed,galvanised ,strips (except 2cx10 sqmm wire armoured) asper is 3975:1990 & extruded pvcouter sheathed armoured cable as per is 1554 pare 1:1998 & confirming to gtp of group –a pg 55 & 56 item 7.4 7.4.10 3.5 core 120 sqmm, 102. supplying of 1.1 kv lt ug cable having aluminium conductor pvc insulated,extruded inner sheathed sheathed,galvanised ,strips (except 2cx10 sqmm wire armoured) asper is 3975:1990 & extruded pvcouter sheathed armoured cable as per is 1554 pare 1:1998 & confirming to gtp of group –a pg 55 & 56 item 7.4 7.4.11 3.5 core 150 sqmm, 103. supplying of 1.1 kv lt ug cable having aluminium conductor pvc insulated,extruded inner sheathed sheathed,galvanised ,strips (except 2cx10 sqmm wire armoured) asper is 3975:1990 & extruded pvcouter sheathed armoured cable as per is 1554 pare 1:1998 & confirming to gtp of group –a pg 55 & 56 item 7.4 7.4.9 3.5 core 185 sqmm, 104. supplying of 1.1 kv lt ug cable having aluminium conductor pvc insulated,extruded inner sheathed sheathed,galvanised ,strips (except 2cx10 sqmm wire armoured) asper is 3975:1990 & extruded pvcouter sheathed armoured cable as per is 1554 pare 1:1998 & confirming to gtp of group –a pg 55 & 56 item 7.4 7.4.10 3.5 core 240 sqmm, 105. supplying of 1.1 kv lt ug cable having aluminium conductor pvc insulated,extruded inner sheathed sheathed,galvanised ,strips (except 2cx10 sqmm wire armoured) asper is 3975:1990 & extruded pvcouter sheathed armoured cable as per is 1554 pare 1:1998 & confirming to gtp of group –a pg 55 & 56 item 7.4 7.4.11 3.5 core 300 sqmm, 106. supplying of 1.1 kv lt ug cable having aluminium conductor pvc insulated,extruded inner sheathed sheathed,galvanised ,strips (except 2cx10 sqmm wire armoured) asper is 3975:1990 & extruded pvcouter sheathed armoured cable as per is 1554 pare 1:1998 & confirming to gtp of group –a pg 55 & 56 item 7.4 7.4.12 3.5 core 400 sqmm, 107. supplying and drawing flexible multicore cable manufactured with electrolytic grade flexible copper with low conductor confirming to table 3 class of is :8310 1984 and ( virgin) pvc insulation and sheathed suitable voltage up to 1100volts as per is 694:1990 & conforming to gtp of group a item 2.8 pg no 8 2.8.1 2 core 1.5 sqmm, 108. supplying and drawing flexible multicore cable manufactured with electrolytic grade flexible copper with low conductor confirming to table 3 class of is :8310 1984 and ( virgin) pvc insulation and sheathed suitable voltage up to 1100volts as per is 694:1990 & conforming to gtp of group a item 2.8 pg no 8 2.8.2 3 core 1.5 sqmm, 109. supplying and drawing flexible multicore cable manufactured with electrolytic grade flexible copper with low conductor confirming to table 3 class of is :8310 1984 and ( virgin) pvc insulation and sheathed suitable voltage up to 1100volts as per is 694:1990 & conforming to gtp of group a item 2.8 pg no 8 2.8.3 4 core 1.5 sqmm, 110. supplying and drawing flexible multicore cable manufactured with electrolytic grade flexible copper with low conductor confirming to table 3 class of is :8310 1984 and ( virgin) pvc insulation and sheathed suitable voltage up to 1100volts as per is 694:1990 & conforming to gtp of group a item 2.8 pg no 8 2.8.4 6 core 1.5 sqmm, 111. supplying and drawing flexible multicore cable manufactured with electrolytic grade flexible copper with low conductor confirming to table 3 class of is :8310 1984 and ( virgin) pvc insulation and sheathed suitable voltage up to 1100volts as per is 694:1990 & conforming to gtp of group a item 2.8 pg no 8 2.8.5 8 core 1.5 sqmm, 112. supplying and drawing flexible multicore cable manufactured with electrolytic grade flexible copper with low conductor confirming to table 3 class of is :8310 1984 and ( virgin) pvc insulation and sheathed suitable voltage up to 1100volts as per is 694:1990 & conforming to gtp of group a item 2.8 pg no 8 2.8.6 10 core 1.5 sqmm, 113. supplying and drawing flexible multicore cable manufactured with electrolytic grade flexible copper with low conductor confirming to table 3 class of is :8310 1984 and ( virgin) pvc insulation and sheathed suitable voltage up to 1100volts as per is 694:1990 & conforming to gtp of group a item 2.8 pg no 8 2.8.7 2 core 2.5 sqmm, 114. supplying and drawing flexible multicore cable manufactured with electrolytic grade flexible copper with low conductor confirming to table 3 class of is :8310 1984 and ( virgin) pvc insulation and sheathed suitable voltage up to 1100volts as per is 694:1990 & conforming to gtp of group a item 2.8 pg no 8 2.8.8 3core 2.5 sqmm, 115. supplying and drawing flexible multicore cable manufactured with electrolytic grade flexible copper with low conductor confirming to table 3 class of is :8310 1984 and ( virgin) pvc insulation and sheathed suitable voltage up to 1100volts as per is 694:1990 & conforming to gtp of group a item 2.8 pg no 8 2.8.9 4core 2.5 sqmm, 116. supplying and drawing flexible multicore cable manufactured with electrolytic grade flexible copper with low conductor confirming to table 3 class of is :8310 1984 and ( virgin) pvc insulation and sheathed suitable voltage up to 1100volts as per is 694:1990 & conforming to gtp of group a item 2.8 pg no 8 2.8.10 6core 2.5 sqmm, 117. supplying and drawing flexible multicore cable manufactured with electrolytic grade flexible copper with low conductor confirming to table 3 class of is :8310 1984 and ( virgin) pvc insulation and sheathed suitable voltage up to 1100volts as per is 694:1990 & conforming to gtp of group a item 2.8 pg no 8 2.8.11 8core 2.5 sqmm, 118. supplying and drawing flexible multicore cable manufactured with electrolytic grade flexible copper with low conductor confirming to table 3 class of is :8310 1984 and ( virgin) pvc insulation and sheathed suitable voltage up to 1100volts as per is 694:1990 & conforming to gtp of group a item 2.8 pg no 8 2.8.12 10 core 2.5 sqmm, 119. labour charges for laying of 1.1 kv class ug cable in existing trench gi pipe / stone ware pipe / on wall / on pole as required pg 61 item 7.8in existing trench/duct7.8.1 6 sqmm to 16 sqmm, 120. labour charges for laying of 1.1 kv class ug cable in existing trench gi pipe / stone ware pipe / on wall / on pole as required pg 61 item 7.8in existing trench/duct 7.8.2 25 sqmm to 75 sqmm, 121. labour charges for laying of 1.1 kv class ug cable in existing trench gi pipe / stone ware pipe / on wall / on pole as required pg 61 item 7.8in existing trench/duct 7.8.3 95 sqmm to 150 sqmm, 122. labour charges for laying of 1.1 kv class ug cable in existing trench gi pipe / stone ware pipe / on wall / on pole as required pg 61 item 7.8in existing trench/duct 7.8.4 185 sqmm to 240 sqmm, 123. labour charges for laying of 1.1 kv class ug cable in existing trench gi pipe / stone ware pipe / on wall / on pole as required pg 61 item 7.8in existing trench/duct 7.8.5 300 sqmm to 400 sqmm, 124. labour charges for laying of 1.1 kv class ug cable in existing trenchgi pipe/stone ware pipe /on wall/on pole as required pg 61 item 5 7.8, 7.8.2 on wall/structure 7.8.6 6 sqmm to 16 sqmm, 125. labour charges for laying of 1.1 kv class ug cable in existing trenchgi pipe/stone ware pipe /on wall/on pole as required pg 61 item 5 7.8, 7.8.2 on wall/structure 7.8.7 25 sqmm to 75sqmm, 126. labour charges for laying of 1.1 kv class ug cable in existing trenchgi pipe/stone ware pipe /on wall/on pole as required pg 61 item 5 7.8, 7.8.2 on wall/structure 7.8.8 95 sqmm to 150sqmm, 127. labour charges for laying of 1.1 kv class ug cable in existing trenchgi pipe/stone ware pipe /on wall/on pole as required pg 61 item 5 7.8, 7.8.2 on wall/structure 7.8.9 185 sqmm to 240 sqmm, 128. labour charges for laying of 1.1 kv class ug cable in existing trenchgi pipe/stone ware pipe /on wall/on pole as required pg 61 item 5 7.8, 7.8.2 on wall/structure 7.8.10 300 sqmm to 400 sqmm, 129. earth work excavation for cable trench of 0.5 to 0.75 mtr width and depth upto 1 mtr including trial pits , depositing on bank upto a lead 50 mtrs, supplying and displaying necessary danger boards and lighting, using sight rails and sign boards at every 100 mtrs wherever necessary as directed( bescom sr) in ordinary soil, 130. earth work excavation for cable trench of 0.5 to 0.75 mtr width and depth upto 1 mtr including trial pits , depositing on bank upto a lead 50 mtrs, supplying and displaying necessary danger boards and lighting, using sight rails and sign boards at every 100 mtrs wherever necessary as directed( bescom sr) in hard soil, 131. earth work excavation for cable trench of 0.5 to 0.75 mtr width and depth upto 1 mtr including trial pits , depositing on bank upto a lead 50 mtrs, supplying and displaying necessary danger boards and lighting, using sight rails and sign boards at every 100 mtrs wherever necessary as directed( bescom sr) in hard rock/ latterite rock, latterite soil, 132. refilling the trenches with selected available earth from the trenchexcavation including watering, consolidation in layers of 15cmthickness including deposition of surplus earth with lead of 200 mtrs( bescom sr), 133. cutting the road surface for cable trenches and disposing of the excavated earth, as directed including barricading, danger lighting then refilling the cable trenches( bescom sr) macadam road, 134. cutting the road surface for cable trenches and disposing of the excavated earth, as directed including barricading, danger lighting then refilling the cable trenches( bescom sr) tar road, 135. cutting the road surface for cable trenches and disposing of the excavated earth, as directed including barricading, danger lighting then refilling the cable trenches( bescom sr)cement concrete road, 136. providing and laying in position plain cement concrete of mix 1:4:8 with opc cement @ 180kgs, with 40mm and down size graded metal coarse aggregate @0.85cum and fine aggregates @0.57cum machine mixed, concrete laid in layers not exceeding 15cms. thick well compacted in foundation including cost of all materials, labour hom of machinery curing complete as per specifications. (page no. 13, item no. 4.3)., 137. ksrb 4.2.8: providing and laying in position reinforced cement concrete of design mix m 20 with opc cement @ 320kgs, with 20mm and down size graded granite metal coarse aggregates @ 0.69cum and fine aggregates @ 0.46cum, with superplastisiser @ 3lts confirming to is9103 1999 reaffired 2008, machine mixed, concrete laid in layers not exceeding 15cms thick, vibrated for r.c.c. beams, columns of all sizes in foundation plinth and superstructure ground floor level for roof slabs, staircase, lintles, columns, including cost of all materials, labour, hom of machinery, curing, complete as per specification. specification no. kbs 4.1, 4.6 page no.14/ item no. 4.13/ pwd sr 2018 19., 138. painting two coats after filling the surface with synthetic enamel paint in approved shades on new plastered concrete surfaces with materials, labour complete as per specifications (page no. 180, item no. 24.1), 139. ksrrb 500 6: providing and applying primer coat with bitumen emulsion on prepared surface of granular base including clearing of road surface and spraying primer at the rate of 0.60 kg/sqm using mechanical means complete as per specifications. morth specification no. 502 page no. 158, item no. 21.6), 140. ksrrb m500 17: providing and laying dense graded bituminous macadam using crusheder hour using crushed aggregates of specified grading, premixed with vg30 grade bituminous binder and transporting the hot mix to work site, laying to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction in all respects complete in all respects as per specifications. clause 505 of morth v revision using 120tph capacity asphalt batch mix plant with sensor paver gr ll (50mm to 75mm) with 4.5% vg 30 bitumen page no. 160/ item no. 21.17.2/ pwd sr 2018 19, 141. providing and applying tack coat using 80/100 grade bitumen(vg10) on the prepared black topped surfaces at 2.5 kg per 10 sqm, heating bitumen in boiler fitted with spray set (excluding cleaning of road surface) including cost of all materials, labour, hom of machineries complete as per specifications (page 158, item no.21.7)., 142. ksrrb m500 18: providing and laying semi dense bituminous concrete using crusheder hour using crushed aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site, laying to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per morth specifications. clause 508 complete in all respects complete as per specifications. using 40/60 tph capacity h.m.p with sensor paver gr ll (25mm to 30mm) with 5% vg 10 bitumen page no. 160/ item no. 21.20.10/ pwd sr 2018 19, 143. ksrrb m400 wet mix macadam ksrrb m400 17. providing, laying, spreading and compacting crushed stone aggregates of granite / trap / basalt to wet mix macadam specifications including pre mixing the material with water at omc in mechanical mix plant carriage of mixed method of tipper to site, laying in uniform layers with paver in sub base/base course on well prepared surface and compacting with vibratory roller to achieve the desired density complete as per specifications. morth specification no. 406 (p.no.155, itm no 20.18 pwd sr 18 19)ksrrb m400 wet mix macadam ksrrb m400 17. providing, laying, spreading and compacting crushed stone aggregates of granite / trap / basalt to wet mix macadam specifications including pre mixing the material with water at omc in mechanical mix plant carriage of mixed method of tipper to site, laying in uniform layers with paver in sub base/base course on well prepared surface and compacting with vibratory roller to achieve the desired density complete as per specifications. morth specification no. 406 (p.no.155, itm no 20.18 pwd sr 18 19), 144. spreading of 40mm stone jelly, 145. providing chain link fencing 50mm size of 8 gauge properly stretched between rectangular poles and fixed with suitable bolts & nuts , the free ends shall be welded to the poles and block pipe at bottom as required including cost of all materials, labour, lead anf lifts, cutting, bending wherever necessary, wastage and lapping etc.. complete as per the direction of the enginner in charge of the work including two coats of approved quality paint over one coat of primer paint, 146. providing and fixing m.s block pipe of 38mm dia of heavy gauge of 14 including removing the bends , cutting the pipes and fixing pipe in between the two vertical poles( ms rectangular poles) and spot welding the chain link with m.s block pipe including cost of all matrials wasting in cutting, scaffolding wherever necessary with all lead and lift as per the directions of the enginner of the work etc.. complete including two coats of approved quality paint over one coat of shop paint pg no:262 item no:37.4, 147. supplying and fixing ms rectangular poles made out of 2 equal angels of 65c656 mm welde, 148. supplying tinned copper lugs and crimping and wiring to terminal point of wire of the following sizes pg 64 item 7.21.6, 7.21.1 1.5 sqmm, 149. supplying tinned copper lugs and crimping and wiring to terminal point of wire of the following sizes pg 64 item 7.21.6, 7.21.2 2.5, 150. supplying tinned copper lugs and crimping and wiring to terminal point of wire of the following sizes pg 64 item 7.21.6, 7.21.3 4 sqmm, 151. supplying tinned copper lugs and crimping and wiring to terminal point of wire of the following sizes pg 64 item 7.21.6, 7.21.4 6 sqmm, 152. supplying tinned copper lugs and crimping and wiring to terminal point of wire of the following sizes pg 64 item 7.21.6, 7.21.5 10 sqmm, 153. supplying tinned copper lugs and crimping and wiring to terminal point of wire of the following sizes pg 64 item 7.21.6, 7.21.6 16 sqmm, 154. supplying tinned copper lugs and crimping and wiring to terminal point of wire of the following sizes pg 64 item 7.21.6, 7.21.7 25 sqmm long barrel, 155. supplying tinned copper lugs and crimping and wiring to terminal point of wire of the following sizes pg 64 item 7.21.6, 7.21.8 35 sqmm long barrele, 156. supplying tinned copper lugs and crimping and wiring to terminal point of wire of the following sizes pg 64 item 7.21.6, 7.21.9 50 sqmm long barrel, 157. supplying tinned copper lugs and crimping and wiring to terminal point of wire of the following sizes pg 64 item 7.21.6, 7.21.10 70 sqmm long barrel, 158. supplying tinned copper lugs and crimping and wiring to terminal point of wire of the following sizes pg 64 item 7.21.6, 7.21.11 95 sqmm long barrel, 159. supplying tinned copper lugs and crimping and wiring to terminal point of wire of the following sizes pg 64 item 7.21.6, 7.21.12 120 sqmm long barrel, 160. supplying tinned copper lugs and crimping and wiring to terminal point of wire of the following sizes pg 64 item 7.21.6, 7.21.13 150 sqmm long barrel, 161. supplying tinned copper lugs and crimping and wiring to terminal point of wire of the following sizes pg 64 item 7.21.6, 7.21.14 185 sqmm long barrel, 162. supplying tinned copper lugs and crimping and wiring to terminal point of wire of the following sizes pg 64 item 7.21.6, 7.21.15 240 sqmm long barrel, 163. supplying tinned copper lugs and crimping and wiring to terminal point of wire of the following sizes pg 64 item 7.21.6, 7.21.15 300 sqmm long barrel, 164. supplying tinned copper lugs and crimping and wiring to terminal point of wire of the following sizes pg 64 item 7.21.6, 7.21.15 400 sqmm long barrel, 165. supplying capacitor type ceiling fan complete with down rod blades,shackle,canopies etc… for operation on 230 volts 50 cycles.single phase ac supply conforming to iss 374 1979 and with double ball bearing system and as per technical data approved pg 78 sl no 9.3 sl no 9.3.1 48” sweep(1200mm) sl no 9.3.1.1 regular model, 166. supplying capacitor type ceiling fan complete with down rod blades,shackle,canopies etc… for operation on 230 volts 50 cycles.single phase ac supply conforming to iss 374 1979 and with double ball bearing system and as per technical data approved pg 78 sl no 9.3 sl no 9.3.2 56” sweep(1400mm) sl no 9.3.1.1 regular model, 167. fixing a ceiling/wall mounting fan of all capacities and all types to the existing shook with fan regulator to the existing board together with supplying and fixing a 5 amperes ceiling rose ,necessary length of 23 /0.0076” inch pvc insulated twin twisted copper wire and wiring pg 109 sl no:17.8, 168. fixing a ceiling/wall mounting fan of all capacities and all types with necessary clamps and “ s “ hook made out of 15mm dia ms rod , with 5 amps ceiling rose of approved quality with necessary length of 23/ 0.0076 inch pvc insulated twin twisted wire of approved quality. mounted on suitable size and wired pg 109 item 17.9, 169. supplying exhaust fan of 1440 rpm of 300mm (12’) size exhaust fan with bracket blades suitable to operate on 230 volts 50 hz ac supply complete pg 78 item 9.1, 170. supplying exhaust fan of 1440 rpm of 300mm (12’) heavy duty exhaust fan with bracket blades suitable to operate on 230 volts 50 hz ac supply complete pg 78 item 9.2 9.2.1 12” sweep(300mm), 171. supplying exhaust fan of 1440 rpm of 300mm (12’) heavy duty exhaust fan with bracket blades suitable to operate on 230 volts 50 hz ac supply complete pg 78 item 9.2 9.2.1 15” sweep(450mm), 172. fixing one exhaust fan after making a suitable nitch in the wall and finishing with cement morter and colouring to match the existing wall or brackets with bolts and nuts and a 5 amps ceiling rose with sufficient length of 23 /0.0076 inch pvc insulated twin core wire of approved make with wire mesh amd wooden frame pg 109 item 17.11, 173. fixing one exhaust fan in the nitch nitch already left in the wall with bolts and nuts and 5 amps ceiling rose with sufficient length of 23/ 0.0076 inch pvc insulated twin core wire, 174. supplying of 3 star 1 ton capacity window type air conditioner confirming to is specification suitable for operation on 230 volts , 50 hz ac supply with all accessories pg 78 item 9.5 9.5.1 1 ton capacity 3 star rated copper condenser, 175. supplying of 3 star 1 ton capacity window type air conditioner confirming to is specification suitable for operation on 230 volts , 50 hz ac supply with all accessories pg 78 item 9.5 9.5.1 1.5 ton capacity 3 star rated copper condenser, 176. supplying of 3 star 1 ton capacity window type air conditioner confirming to is specification suitable for operation on 230 volts , 50 hz ac supply with all accessories pg 78 item 9.59.5.1 1 ton capacity 3 star rated copper condenser, 177. supplying of 3 star rated 1 tr split air conditioner suitable for operation on ac supply single phase 50 hz 230 volts with hermitically sealed compressor with air cooled condenser,motor capacitor and start run capacitors,relay and over load protector internal unit. with one indoor and one out door unit .the condenser unit will be placed outside the room on the terrace to avoid the noise including standard length of suitable size copper tubing covered with insulation tube .(high wall chorded/chordless) pg 78 item 9.6.1.1 9.6.1.1 1 ton capacity 3 star rated, 178. supplying of 5 star rated 1 tr split air conditioner suitable for operation on ac supply single phase 50 hz 230 volts with hermitically sealed compressor with air cooled condenser,motor capacitor and start run capacitors,relay and over load protector internal unit. with one indoor and one out door unit .the condenser unit will be placed outside the room on the terrace to avoid the noise including standard length of suitable size copper tubing covered with insulation tube .(high wall chorded/chordless) pg 78 item 9.6.2.1 9.6.2.1 1 ton capacity 5 star rated, 179. supplying of 3 star rated 1.5 tr split air conditioner suitable for operation on ac supply single phase 50 hz 230 volts with hermitically sealed compressor with air cooled condenser,motor capacitor and start run capacitors,relay and over load protector internal unit. with one indoor and one out door unit .the condenser unit will be placed outside the room on the terrace to avoid the noise including standard length of suitable size copper tubing covered with insulation tube .(high wall chorded/chordless) pg 78 item 9.6.1.1 9.6.1.2 1.5 ton capacity 3 star rated, 180. supplying of 5 star rated 1.5 tr split air conditioner suitable for operation on ac supply single phase 50 hz 230 volts with hermitically sealed compressor with air cooled condenser,motor capacitor and start run capacitors,relay and over load protector internal unit. with one indoor and one out door unit .the condenser unit will be placed outside the room on the terrace to avoid the noise including standard length of suitable size copper tubing covered with insulation tube .(high wall chorded/chordless) pg 78 item 9.6.2.2 9.6.2.2 1.5 ton capacity 5 star rated, 181. supplying of 3 star rated 1.5 tr split air conditioner suitable for operation on ac supply single phase 50 hz 230 volts with hermitically sealed compressor with air cooled condenser,motor capacitor and start run capacitors,relay and over load protector internal unit. with one indoor and one out door unit .the condenser unit will be placed outside the room on the terrace to avoid the noise including standard length of suitable size copper tubing covered with insulation tube .(high wall chorded/chordless) pg 78 item 9.6.1.3 9.6.1.3 2 ton capacity 3 star rated, 182. supplying of 5 star rated 2 tr split air conditioner suitable for operation on ac supply single phase 50 hz 230 volts with hermitically sealed compressor with air cooled condenser,motor capacitor and start run capacitors,relay and over load protector internal unit. with one indoor and one out door unit .the condenser unit will be placed outside the room on the terrace to avoid the noise including standard length of suitable size copper tubing covered with insulation tube .(high wall chorded/chordless) pg 79 item 9.6.2.3 9.6.2.3 2 ton capacity 5 star rated, 183. installation charges for 1 to 2ton capacity window type air conditioners with 50x75 thick teak wood frame of suitable size and allied works complete pg 79 item 9.9, 184. installation charges for split type air conditioners with allied works for one indoor and one outdoor unit is to be mounted on suitable angle iron support upto 3.0 ton split/cassette type a/c pg 79 item 9.10, 185. supplying and fixing of insulated refrigrent copper tubing of 5/8’’ and 3/8’’ with polythene foam insulation 3 core 80 strands copper wiring between indoor and outdoor unit.leak testing of oil and gas charging for additional piping length of tube pg 79 item 9.11.1, 186. supplying and refilling refrigerant (f 22/f 12 )for air conditioning equipment including labour and nitrogen gas for pressure and leak testing pg 80 item 9.17, 187. extra for fabrication supply and fixing of standard fabricated using slotted angel/l angel of size 6mmx50mm for mounting out door/indoor a.c.unit/batteries pg 80 item 9.20, 188. supplying and fixing capacitors of approved make for window/ split air conditioners pg 80 item 9.14.1 9.14.1 25 to 45 mfd running capacitor, 189. supplying and fixing capacitors of approved make for window/ split air conditioners pg 80 item 9.14 9.14.2 80 to 200 mfd starting capacitor, 190. supplying and installation , testing and commissioning of heavy duty compressor suitable foe window / split type ac pg 79 item9.12 9.12.1 1 ton capacity, 191. supplying and installation , testing and commissioning of heavy duty compressor suitable foe window / split type ac pg 79 item9.12 9.12.2 1.5 to 2ton capacity, 192. supplying and installation , testing and commissioning of heavy duty compressor suitable foe window / split type ac pg 79 item9.129.12.3 3 ton capacity, 193. supplying , errction, testing, commissioni9ng of cassette type split air conditioners suitable for operation on single phase/ three phase ac supply , hermetically sealed compressor with air cooled condenser motor start, capacitor run , relay and ober load protection , one ceiling mounted indoor unit and out door condenser unit including standard accessories covered with insulation tube including battery operated cordless unit pg 79 item 9.7 9.7.1 2 tr cassette single phase, 194. supplying , errction, testing, commissioni9ng of cassette type split air conditioners suitable for operation on single phase/ three phase ac supply , hermetically sealed compressor with air cooled condenser motor start, capacitor run , relay and ober load protection , one ceiling mounted indoor unit and out door condenser unit including standard accessories covered with insulation tube including battery operated cordless unit pg 79 item 9.7 9.7.2 3 tr cassette three phase, 195. supplying , errction, testing, commissioni9ng of cassette type split air conditioners suitable for operation on single phase/ three phase ac supply , hermetically sealed compressor with air cooled condenser motor start, capacitor run , relay and ober load protection , one ceiling mounted indoor unit and out door condenser unit including standard accessories covered with insulation tube including battery operated cordless unit pg 79 item 9.7 9.7.3 4 tr cassette three phase, 196. supplying, errection., testing , commissioning packaged type ductable split air conditionere with microprocessor control, fitted with twin scroll compressors with r22/ latest refrigerant . the unit shall be pre wired to operate on 415 volts 50 hz ac supply. the unit shall comprise evaporated condenser unit , inddor outdoor motor fans, suitable over vent fins made of aluminium , copper refrigerant coil etc.. complete and corded control unit pg 79 item 9.8 9.8.1 capacity : 3tr, 197. supplying, errection., testing , commissioning packaged type ductable split air conditionere with microprocessor control, fitted with twin scroll compressors with r22/ latest refrigerant . the unit shall be pre wired to operate on 415 volts 50 hz ac supply. the unit shall comprise evaporated condenser unit , inddor outdoor motor fans, suitable over vent fins made of aluminium , copper refrigerant coil etc.. complete and corded control unit pg 79 item 9.8 9.8.2 capacity : 4.25tr, 198. supplying, errection., testing , commissioning packaged type ductable split air conditionere with microprocessor control, fitted with twin scroll compressors with r22/ latest refrigerant . the unit shall be pre wired to operate on 415 volts 50 hz ac supply. the unit shall comprise evaporated condenser unit , inddor outdoor motor fans, suitable over vent fins made of aluminium , copper refrigerant coil etc.. complete and corded control unit pg 79 item 9.8 9.8.3 capacity : 5.5 tr, 199. supplying, errection., testing , commissioning packaged type ductable split air conditionere with microprocessor control, fitted with twin scroll compressors with r22/ latest refrigerant . the unit shall be pre wired to operate on 415 volts 50 hz ac supply. the unit shall comprise evaporated condenser unit , inddor outdoor motor fans, suitable over vent fins made of aluminium , copper refrigerant coil etc.. complete and corded control unit pg 79 item 9.8 9.8.4 capacity : 8.5 tr, 200. supplying, errection., testing , commissioning packaged type ductable split air conditionere with microprocessor control, fitted with twin scroll compressors with r22/ latest refrigerant . the unit shall be pre wired to operate on 415 volts 50 hz ac supply. the unit shall comprise evaporated condenser unit , inddor outdoor motor fans, suitable over vent fins made of aluminium , copper refrigerant coil etc.. complete and corded control unit pg 79 item 9.8 9.8.5 capacity : 11tr, 201. supplying, errection., testing , commissioning packaged type ductable split air conditionere with microprocessor control, fitted with twin scroll compressors with r22/ latest refrigerant . the unit shall be pre wired to operate on 415 volts 50 hz ac supply. the unit shall comprise evaporated condenser unit , inddor outdoor motor fans, suitable over vent fins made of aluminium , copper refrigerant coil etc.. complete and corded control unit pg 79 item 9.8 9.8.5 capacity : 17tr, 202. supplying and installation of 5/8” and 7/8” hard drawn refrigerant pipe and insulation suitable for 11 tr ductable split air conditioners pg 80 item 9.22, 203. replacement of compressor for 5.5 tr ductable split air conditioner including gas charging including releasing and re fixing and to and fro transportation charges on exchange basis, 204. replacement of compressor for 8.5 tr ductable split air conditioner including gas charging including releasing and re fixing and to and fro transportation charges on exchange basis, 205. replacement of controller for 5.5 tr chiller, 206. replacement of heat exchanger for 5.5 tr ductable ac unit, 207. replacement of heat exchanger inside the indoor unit of 8.5 tr ductable ac unit, 208. supplying of universal remote for air conditioners, 209. supplying a 25 litres vertical /horizontal type wall mounting electrical water heater with 22 swg copper /ss sheet metal inner container tinned inside and anticorrosive painted outside and 20 swg m.s sheet metal outer cover between inner and outer container filled with glass wool complete with inlet and outlet pipes with inlet and outlet pipes so arranged that water flow inside results in water to flow out from the inner container without turbulence.the inner container shall have direct immersion type copper tube nickel plate 2 kw capacity element with a neon indicator fitted with 20a capacity 25 to 85 degree centigrade range thermostat .the water heater shall completely be wired with 40/0.0076” inch 3 core copper flexible wire of 1.5 meters length and the outlet container provided with heavy gauge brackets for wall mountin pg 83 item 10.1.1 10.1.1 25 litres, 210. supplying a 35 litres vertical /horizontal type wall mounting electrical water heater with 22 swg copper /ss sheet metal inner container tinned inside and anticorrosive painted outside and 20 swg m.s sheet metal outer cover between inner and outer container filled with glass wool complete with inlet and outlet pipes with inlet and outlet pipes so arranged that water flow inside results in water to flow out from the inner container without turbulence.the inner container shall have direct immersion type copper tube nickel plate 2 kw capacity element with a neon indicator fitted with 20a capacity 25 to 85 degree centigrade range thermostat .the water heater shall completely be wired with 40/0.0076” inch 3 core copper flexible wire of 1.5 meters length and the outlet container provided with heavy gauge brackets for wall mountin pg 83 item 10.1.1 10.1.2 35 litres, 211. supplying a 50 litres vertical /horizontal type wall mounting electrical water heater with 22 swg copper /ss sheet metal inner container tinned inside and anticorrosive painted outside and 20 swg m.s sheet metal outer cover between inner and outer container filled with glass wool complete with inlet and outlet pipes with inlet and outlet pipes so arranged that water flow inside results in water to flow out from the inner container without turbulence.the inner container shall have direct immersion type copper tube nickel plate 2 kw capacity element with a neon indicator fitted with 20a capacity 25 to 85 degree centigrade range thermostat .the water heater shall completely be wired with 40/0.0076” inch 3 core copper flexible wire of 1.5 meters length and the outlet container provided with heavy gauge brackets for wall mountin pg 83 item 10.1.3 10.1.3 50 litres, 212. errection charges for fixing a 35 litres capacity wall mounting boiler (electrical geysers)using bolts ,flat at one end nut and washers at the other end for through bolts and nuts and washers with 150x450x600mm back plate and wiring complete with 15a 3pin top of approved make pg 109 item 17.13.1 17.13.1 up to 30 litres, 213. errection charges for fixing a 35 litres capacity wall mounting boiler (electrical geysers)using bolts ,flat at one end nut and washers at the other end for through bolts and nuts and washers with 150x450x600mm back plate and wiring complete with 15a 3pin top of approved make pg 109 item 17.13.2 17.13.2 35 to 50 litres, 214. supplying…100 amps rated 3 phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured pvc sleeve , mounted on phenolic/frp?dmc insulator which are mounted on powder coated 40x6mm m.s flat frame work in existing panel board . the bus bar shall have suitable holes for termination of incoming and outgoing cables as per is specification with necessary bolts, nuts and washers etc.. complete pg 49 item 6.38 6.38.1 100 amps 4x30x6mm alkuminium strips, 215. supplying…250 amps rated 3 phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured pvc sleeve , mounted on phenolic/frp?dmc insulator which are mounted on powder coated 40x6mm m.s flat frame work in existing panel board . the bus bar shall have suitable holes for termination of incoming and outgoing cables as per is specification with necessary bolts, nuts and washers etc.. complete pg 49 item 6.38 6.38.2 250 amps 4x30x10mm alluminium strips, 216. supplying…400 amps rated 3 phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured pvc sleeve , mounted on phenolic/frp/dmc insulator which are mounted on powder coated 40x6mm m.s flat frame work in existing panel board . the bus bar shall have suitable holes for termination of incoming and 218outgoing cables as per is specification with necessary bolts, nuts and washers etc.. complete pg 49 item 6.38 6.38.3 400 amps 4x30x10mm alluminium strips, 217. supplying 600…amps rated 3 phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured pvc sleeve , mounted on phenolic/frp/dmc insulator which are mounted on powder coated 40x6mm m.s flat frame work in existing panel board . the bus bar shall have suitable holes for termination of incoming and outgoing cables as per is specification with necessary bolts, nuts and washers etc.. complete pg 49 item 6.38 6.38.4 600 amps 4x30x10mm alluminium strips, 218. supplying…amps rated 3 phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured pvc sleeve , mounted on phenolic/frp/dmc insulator which are mounted on powder coated 40x6mm m.s flat frame work in existing panel board . the bus bar shall have suitable holes for termination of incoming and outgoing cables as per is specification with necessary bolts, nuts and washers etc.. complete pg 49 item 6.38 6.38.5 1000 amps double run of 60x10mm per phase and single run of 60x10mm for neutral, 219. supplying and fixing angel iron frame work fabricated out of m s angel iron and ms flat with bolts , washers etc.. and painted with 2 coates of red oxide and the two coates of approved paint pg 49 item 6.39 6.39.1 40x40x6mm, 220. supplying and fixing angel iron frame work fabricated out of m s angel iron and ms flat with bolts , washers etc.. and painted with 2 coates of red oxide and the two coates of approved paint pg 49 item 6.39 6.39.2 50x50x6mm, 221. supplying and fixing angel iron frame work fabricated out of m s angel iron and ms flat with bolts , washers etc.. and painted with 2 coates of red oxide and the two coates of approved paint pg 49 item 6.396.39.3 75x75x6mm, 222. supplying and fixing angel iron frame work fabricated out of m s angel iron and ms flat with bolts , washers etc.. and painted with 2 coates of red oxide and the two coates of approved paint pg 49 item 6.396.39.4 50x100x50x6mm c channel, 223. supplying and fixing angel iron frame work fabricated out of m s angel iron and ms flat with bolts , washers etc.. and painted with 2 coates of red oxide and the two coates of approved paint pg 49 item 6.396.39.5 75x150x75x6mm c channel, 224. supplying and fixing surface /flush mounting unbreakable pvc modular box suitable for mounting switch plates with due groove cutting in brick/cc wall including necessary rawl plugs, machine screws etc.. complete pg 15 item 3.43.4.1 1 3 way, 225. supplying and fixing surface /flush mounting unbreakable pvc modular box suitable for mounting switch plates with due groove cutting in brick/cc wall including necessary rawl plugs, machine screws etc.. complete pg 15 item 3.43.4,2 4 5 way, 226. supplying and fixing surface /flush mounting unbreakable pvc modular box suitable for mounting switch plates with due groove cutting in brick/cc wall including necessary rawl plugs, machine screws etc.. complete pg 15 item 3.4.3 6 8 way, 227. supplying and fixing surface /flush mounting unbreakable pvc modular box suitable for mounting switch plates with due groove cutting in brick/cc wall including necessary rawl plugs, machine screws etc.. complete pg 15 item 3.4.4 10 12 way, 228. supplying and fixing surface /flush mounting unbreakable pvc modular box suitable for mounting switch plates with due groove cutting in brick/cc wall including necessary rawl plugs, machine screws etc.. complete pg 15 item 16 18 way, 229. supplying and flush mounting powder coated/ galvanized metal box suitable for mounting modular switch plates. the box should be firmly flush mounted after due groove cutting in brick/stone /cc wall3.5.1 1 3 way, 230. supplying and flush mounting powder coated/ galvanized metal box suitable for mounting modular switch plates. the box should be firmly flush mounted after due groove cutting in brick/stone /cc wall3.5.2 4 5 way, 231. supplying and flush mounting powder coated/ galvanized metal box suitable for mounting modular switch plates. the box should be firmly flush mounted after due groove cutting in brick/stone /cc wall3.5.3 6 way, 232. supplying and flush mounting powder coated/ galvanized metal box suitable for mounting modular switch plates. the box should be firmly flush mounted after due groove cutting in brick/stone /cc wall3.5.3 8 way, 233. supplying and flush mounting powder coated/ galvanized metal box suitable for mounting modular switch plates. the box should be firmly flush mounted after due groove cutting in brick/stone /cc wall3.5.5 10 12 way, 234. supplying and flush mounting powder coated/ galvanized metal box suitable for mounting modular switch plates. the box should be firmly flush mounted after due groove cutting in brick/stone /cc wall3.5.6 16 way, 235. supplying and flush mounting powder coated/ galvanized metal box suitable for mounting modular switch plates. the box should be firmly flush mounted after due groove cutting in brick/stone /cc wall18 way, 236. supplying and fixing superior quality modular switch mounting poly carbonate plate with necessary supporting back plate with required no,s of machine screws , bolts , nuts etc.. complte on the existing metal/pvc box pg 16 item3.6.1 1 to 3 module, 237. supplying and fixing superior quality modular switch mounting poly carbonate plate with necessary supporting back plate with required no,s of machine screws , bolts , nuts etc.. complte on the existing metal/pvc box pg 16 item3.6.2 4 module, 238. supplying and fixing superior quality modular switch mounting poly carbonate plate with necessary supporting back plate with required no,s of machine screws , bolts , nuts etc.. complte on the existing metal/pvc box pg 16 item3.6.3 6 module, 239. supplying and fixing superior quality modular switch mounting poly carbonate plate with necessary supporting back plate with required no,s of machine screws , bolts , nuts etc.. complte on the existing metal/pvc box pg 16 item3.6.4 8 module, 240. supplying and fixing superior quality modular switch mounting poly carbonate plate with necessary supporting back plate with required no,s of machine screws , bolts , nuts etc.. complte on the existing metal/pvc box pg 16 item3.6.5 12 module, 241. supplying and fixing superior quality modular switch mounting poly carbonate plate with necessary supporting back plate with required no,s of machine screws , bolts , nuts etc.. complte on the existing metal/pvc box 18 module, 242. supplying and fixing of modular switch / socket / stepped electronic fan regulator / dimmer/ telephone socket etc.. on existing modular switch plate as per is 3854 and is 1293 pg 16 item 3.7group a3.7.1 6 amps one way, 243. supplying and fixing of modular switch / socket / stepped electronic fan regulator / dimmer/ telephone socket etc.. on existing modular switch plate as per is 3854 and is 1293 pg 16 item 3.7group a 3.7.2 6 amps two way, 244. supplying and fixing of modular switch / socket / stepped electronic fan regulator / dimmer/ telephone socket etc.. on existing modular switch plate as per is 3854 and is 1293 pg 16 item 3.7group a3.7.3 6 amps 3 way socket, 245. supplying and fixing of modular switch / socket / stepped electronic fan regulator / dimmer/ telephone socket etc.. on existing modular switch plate as per is 3854 and is 1293 pg 16 item 3.7group a3.7.4 stepped fan regulator, 246. supplying and fixing of modular switch / socket / stepped electronic fan regulator / dimmer/ telephone socket etc.. on existing modular switch plate as per is 3854 and is 1293 pg 16 item 3.7group a 3.7.5 600 watts dimmer, 247. supplying and fixing of modular switch / socket / stepped electronic fan regulator / dimmer/ telephone socket etc.. on existing modular switch plate as per is 3854 and is 1293 pg 16 item 3.7group a 3.7.6 1000 1200 watts dimmer, 248. supplying and fixing of modular switch / socket / stepped electronic fan regulator / dimmer/ telephone socket etc.. on existing modular switch plate as per is 3854 and is 1293 pg 16 item 3.7group a 3.7.7 16 amps one way switch, 249. supplying and fixing of modular switch / socket / stepped electronic fan regulator / dimmer/ telephone socket etc.. on existing modular switch plate as per is 3854 and is 1293 pg 16 item 3.7group a 3.7.8 6 amps bell push, 250. supplying and fixing of modular switch / socket / stepped electronic fan regulator / dimmer/ telephone socket etc.. on existing modular switch plate as per is 3854 and is 1293 pg 16 item 3.7 group a 3.7.9 32 amps dp switch, 251. supplying and fixing of modular switch / socket / stepped electronic fan regulator / dimmer/ telephone socket etc.. on existing modular switch plate as per is 3854 and is 1293 pg 16 item 3.7 group a 3.7.10 6/16 amps universal socket, 252. supplying and fixing of modular switch / socket / stepped electronic fan regulator / dimmer/ telephone socket etc.. on existing modular switch plate as per is 3854 and is 1293 pg 16 item 3.7 group a 3.7.11 rj45/i.o socket, 253. supplying and fixing miniature circuit breakers on existing mcb distribution boards using necessary fixing materials and `c’ type curve,indicator on/off,energy cross 3 with short circuit breaking capacity of 10k and complete wiring as required confirming to iec 60898 pg 47 item 6.16 6.16.1 5 32 amps sp, 254. supplying and fixing miniature circuit breakers on existing mcb distribution boards using necessary fixing materials and `c’ type curve,indicator on/off,energy cross 3 with short circuit breaking capacity of 10k and complete wiring as required confirming to iec 60898 pg 47 item 6.166.16.2 40 63 amps sp, 255. supplying and fixing miniature circuit breakers on existing mcb distribution boards using necessary fixing materials and `c’ type curve,indicator on/off,energy cross 3 with short circuit breaking capacity of 10k and complete wiring as required confirming to iec 60898 pg 47 item 6.166.16.3 5 32 amps dp, 256. supplying and fixing miniature circuit breakers on existing mcb distribution boards using necessary fixing materials and `c’ type curve,indicator on/off,energy cross 3 with short circuit breaking capacity of 10k and complete wiring as required confirming to iec 60898 pg 47 item 6.166.16.4 40 63 amps dp, 257. supplying and fixing miniature circuit breakers on existing mcb distribution boards using necessary fixing materials and `c’ type curve,indicator on/off,energy cross 3 with short circuit breaking capacity of 10k and complete wiring as required confirming to iec 60898 pg 47 item 6.16 6.16.5 5 32 amps tpn, 258. supplying and fixing miniature circuit breakers on existing mcb distribution boards using necessary fixing materials and `c’ type curve,indicator on/off,energy cross 3 with short circuit breaking capacity of 10k and complete wiring as required confirming to iec 60898 pg 47 item 6.16 6.16.6 40 60 amps tpn, 259. supplying and fixing and wiring of led type panel board indicating lamp with required colour suitable for 220 volts 50 hz ac 12/24 volts dc pg 48 item 6.36, 260. supplying and fixing and wiring 1000/%a to 1600 /5a burden class 1 current transformers pg 48 item 6.34, 261. supplying and fixing and wiring electronic 10 40 amps three phase 4 wire class 1 accuracy energy meter pg 49 item 6.33, 262. supplying and fixing and wiring heavy duty low voltage capacitors conforming to is 2834 , 3 phase 400/440 volts grade , for power factor improvement of rotating machiners pg 48 item 6.35, 263. suplying of multi function digital meter with three phase back light lcd type display for voltage , cutrrent, frequency, power, power factor, kva,kwh, kvar suitable for 3 phase 4 wire network with ip 54 degeree of protection and completely wired as required with communication port and class 0.5 s accuracy pg 48 item 6.31, 264. supplying and fixing of and wiring earth leakage miniature circuit breakers (elmcb) 240/450 volts up to 300ma sensitivity on existing wood/ panel board pg 47 item 6.18 6.18.3 32 40 amps 4 pole, 265. supplying and fixing of and wiring earth leakage miniature circuit breakers (elmcb) 240/450 volts up to 300ma sensitivity on existing wood/ panel board pg 47 item 6.18 6.18.4 40 63 amps 4 pole, 266. supplying and fixing regular mcb distribution boards on wall/wood board/flush mounting using required clamps , bolts, nuts etc.. with provision for fixing suitable type capacity mcb,s single phase/ 3phase / single door with powder coated painting . made out of 14 swg ms enclosure pg 47 item 6.17 i single door 6.17.1 4 way sp &n, 267. supplying and fixing regular mcb distribution boards on wall/wood board/flush mounting using required clamps , bolts, nuts etc.. with provision for fixing suitable type capacity mcb,s single phase/ 3phase / single door with powder coated painting . made out of 14 swg ms enclosure pg 47 item 6.17 i single door 6.17.2 8way sp &n, 268. supplying and fixing regular mcb distribution boards on wall/wood board/flush mounting using required clamps , bolts, nuts etc.. with provision for fixing suitable type capacity mcb,s single phase/ 3phase / single door with powder coated painting . made out of 14 swg ms enclosure pg 47 item 6.17 i single door 6.17.3 12 way sp &n, 269. supplying and fixing regular mcb distribution boards on wall/wood board/flush mounting using required clamps , bolts, nuts etc.. with provision for fixing suitable type capacity mcb,s single phase/ 3phase / single door with powder coated painting . made out of 14 swg ms enclosure pg 47 item 6.17 ii double door 6.17.4 4 way sp &n, 270. supplying and fixing regular mcb distribution boards on wall/wood board/flush mounting using required clamps , bolts, nuts etc.. with provision for fixing suitable type capacity mcb,s single phase/ 3phase / single door with powder coated painting . made out of 14 swg ms enclosure pg 47 item 6.17 ii double door 6.17.5 8 way sp &n, 271. supplying and fixing regular mcb distribution boards on wall/wood board/flush mounting using required clamps , bolts, nuts etc.. with provision for fixing suitable type capacity mcb,s single phase/ 3phase / single door with powder coated painting . made out of 14 swg ms enclosure pg 47 item 6.17 ii double door 6.17.6 12 way sp &n, 272. supplying and fixing regular mcb distribution boards on wall/wood board/flush mounting using required clamps , bolts, nuts etc.. with provision for fixing suitable type capacity mcb,s single phase/ 3phase / single door with powder coated painting . made out of 14 swg ms enclosure pg 47 item 6.17 ii double door 6.17.7 4 way tp &n, 273. supplying and fixing regular mcb distribution boards on wall/wood board/flush mounting using required clamps , bolts, nuts etc.. with provision for fixing suitable type capacity mcb,s single phase/ 3phase / single door with powder coated painting . made out of 14 swg ms enclosure pg 47 item 6.17 ii double door 6.17.8 6way tp &n, 274. supplying and fixing regular mcb distribution boards on wall/wood board/flush mounting using required clamps , bolts, nuts etc.. with provision for fixing suitable type capacity mcb,s single phase/ 3phase / single door with powder coated painting . made out of 14 swg ms enclosure pg 47 item 6.17 ii double door 6.17.9 8 way tp &n, 275. supplying and fixing regular mcb distribution boards on wall/wood board/flush mounting using required clamps , bolts, nuts etc.. with provision for fixing suitable type capacity mcb,s single phase/ 3phase / single door with powder coated painting . made out of 14 swg ms enclosure pg 47 item 6.17 ii double door 6.17.10 12 way tp &n, 276. supplying and fixing of led 20/22 watts 4 ft led batten pvc with warranty of 2 years yeras ye 2 years years with high quality diffusers with 25000 burning hours, 277. supplying and fixing of led 20/22 watts 4 ft led batten pvc with warranty of 2 years yeras ye 2 years years with high quality diffusers with 25000 burning hours, 278. supplying and fixing of led 4 ft batten 36 watts with warranty of two year, 279. supplying an fixing of round type ceiling mounted led 12 watts, 280. supplying an fixing of round type ceiling mounted led 18 watts, 281. supplying an fixing of round type surface mounted led 18 watts, 282. supplying an fixing of round type surface mounted led 22 watts, 283. supplying of fluorescent tube 4ft 36 watts, 284. supplying of fluorescent tube 2ft 18/20 watts, 285. supplying of 2 ft led batten 2’ 14 watts, 286. supplying of 4 ft led batten4ft 20/22 watts with pvc body, 287. supplying of 4 ft led batten4ft 20/22 watts with alluminium body, 288. supplying of 36 watts 4 ft led batten, 289. supplying and fixing of led down light 1’x1’ 36 watts, 290. supplying and fixing of led down light 2’x2’ 36 watts, 291. supplying and fixing of led gate lights with high quality diffuser 48 watts, 292. supplying and fixing of 2 pin/4pin 18 watts cfl lamp, 293. supplying and fixing of 4 pin 36 watts cfl, 294. supplying and fixing of choke for 18 watts cfl, 295. supplying and replacement of florescent tubes pg 105 item 16.15, 296. supplying of heavy duty open construction ferromagnetic copper ballast for 20/40 watts fluore fluorescent tube fitting, 297. supplying of heavy duty open construction electronic ballast choke for 20/40 watts fluore 20/40 watts fluorescent tube fitting, 298. supplying and fixing of electronic choke for 20/36 watts fluorescent tube fittings, 299. supplying and fixin supplying and fixing of heavy duty open construction ferromagnetic copper ballast for 20/40 w ballast for 20/40 watts fluorescent tube fitting, 300. supplying and fixing of 230 volts 20/40 watts starters for flourescent tubes pg no 105 item 16.18, 301. supplying and fixing of 230 volts 20/40 watts fluorescent lamp holder pg 105 item 16.19, 302. supplying of 230 volts 20/40 watts starters for flourescent tubes, 303. supply and fixing of 230 volts cfl holder pg 105 item 16.20 16.20.1 2 pin holder, 304. supply and fixing of 230 volts cfl holder pg 105 item 16.20 16.20.2 4 pin holder, 305. supplying of incandescent lamps 60 watts, 306. supplying of incandescent lamps 100 watts, 307. supplying and fixing of angel holders, 308. supplying and fixing of batten holders, 309. supply of angle holders, 310. supplying of battern holders, 311. supplying of insulation tapes, 312. supplying and of heating element of geyser pg 106 item 16.23, 313. supplying and replacingof thermostat 20 amps 20 to 25 inch range thermostat pg 104 item 16.7, 314. supplying and thermostat 20 amps 20 to 25 inch range thermostat, 315. providing re winding for ceiling fans 1200mm inclusine of to and fro transportation charges and releasing and refixing pg 104 ite 16.4 16.4.3 1200mm, 316. supplying and fixing of heating element for racold make geysers, 317. supplying and fixing of thermostat for racold make geysers, 318. supplying and fixing of condenser for ceiling fans pg 104 item 16.3 16.3.1 up to 4 mfd, 319. supplying of 2.5 mfd capacitors for ceiling fan, 320. supplying and fixing of one 230 volts bell or buzzer and a bell type bell push with gang box fixed on necessary wooden or rawl olugs using nf screws pg 104 item 16.1, 321. supplying and fixing of one 230 volts ding dong bell and a flush type bell push with gang box fixed on necessary wooden or rawl plugs using nf screws pg 104 item 16.2 16.2.1 ding dong bell, 322. supplying and fixing of one 230 volts ding dong bell and a flush type bell push with gang box fixed on necessary wooden or rawl plugs using nf screws pg 104 item 16.2 16.2.2 musical, 323. supplying and fixing of one 230 volts ding dong bell and a flush type bell push with gang box fixed on necessary wooden or rawl plugs using nf screws pg 104 item 16.2 16.2.3 remote, 324. providing re winding for 1 hp single phase motor including to and fro transportation charges releasing and re fixing and replacement of bearings etc and condenser, 325. providing re winding for 5 hp single phase motor including to and fro transportation charges releasing and re fixing and replacement of bearings, gaskets , flangues a and painting of motor to the existing color, 326. providing re winding for 5 hp single phase motor including to and fro transportation charges releasing and re fixing and replacement of bearings, gaskets , flangues a and painting of motor to the existing color, 327. supplying and fixing coil for the contactors 100 125 amps, 328. supplying and fixing of contactor coil for 400 amps including releasing and re fixing and to and fro transportation charges, 329. providing services for 30 kva stabilizers and re conditioning etc.., 330. supplying and fixing of coil for 800 amps power contactor and 800 amps acb,s, 331. supplying and fixing of 4 pole power contactor with no/nc contacts on existing wood/ panel board using necessary bolts , nuts , washers and wiring etc,, complete with ac 3 rating and as per is 13947 pg 45 item 6.12 6.12.1 25 amps, 332. supplying and fixing of 4 pole power contactor with no/nc contacts on existing wood/ panel board using necessary bolts , nuts , washers and wiring etc,, complete with ac 3 rating and as per is 13947 pg 45 item 6.12 6.12.2 40 amps, 333. supplying and fixing of 4 pole power contactor with no/nc contacts on existing wood/ panel board using necessary bolts , nuts , washers and wiring etc,, complete with ac 3 rating and as per is 13947 pg 45 item 6.12 6.12.4 100 125 amps, 334. supplying and fixing of 4 pole power contactor with no/nc contacts on existing wood/ panel board using necessary bolts , nuts , washers and wiring etc,, complete with ac 3 rating and as per is 13947 pg 45 item 6.12 6.12.6 225 250 amps, 335. supplying and fixing of 4 pole power contactor with no/nc contacts on existing wood/ panel board using necessary bolts , nuts , washers and wiring etc,, complete with ac 3 rating and as per is 13947 pg 45 item 6.12 6.12.7 400 amps, 336. supplying and fixing of 4 pole power contactor with no/nc contacts on existing wood/ panel board using necessary bolts , nuts , washers and wiring etc,, complete with ac 3 rating and as per is 13947 pg 45 item 6.12 6.12.8 700 800 amps, 337. supplying of on load change over switch 4 poles ac 23 a duty , 50 hz ac supply pg 45 item 6.11 6.11.1 63 amps, 338. supplying of on load change over switch 4 poles ac 23 a duty , 50 hz ac supply pg 45 item 6.11 6.11.2 100 125 amps, 339. supplying of on load change over switch 4 poles ac 23 a duty , 50 hz ac supply pg 45 item 6.11 6.11.4 250 amps, 340. supplying of on load change over switch 4 poles ac 23 a duty , 50 hz ac supply pg 45 item 6.11 6.11.5 400 amps, 341. supplying of on load change over switch 4 poles ac 23 a duty , 50 hz ac supply pg 45 item 6.11 6.11.6 630 amps, 342. supplying of on load change over switch 4 poles ac 23 a duty , 50 hz ac supply pg 45 item 6.11 6.11.7 800 amps, 343. supplying of switch disconnector fuse unit (tpn) hrc type ( but without hrc fuses) with ac 23 amps duty and as per is 13947 pg 45 item 6.8 6.8.1 63 amps, 344. supplying of switch disconnector fuse unit (tpn) hrc type ( but without hrc fuses) with ac 23 amps duty and as per is 13947 pg 45 item 6.8 6.8.2 125 amps, 345. supplying of switch disconnector fuse unit (tpn) hrc type ( but without hrc fuses) with ac 23 amps duty and as per is 13947 pg 45 item 6.8 6.8.1 200 amps, 346. supplying of switch disconnector fuse unit (tpn) hrc type ( but without hrc fuses) with ac 23 amps duty and as per is 13947 pg 45 item 6.8 6.8.1 250 amps, 347. supplying of switch disconnector fuse unit (tpn) hrc type ( but without hrc fuses) with ac 23 amps duty and as per is 13947 pg 45 item 6.8 6.8.1 400 amps, 348. supplying and fixing hrc fuse link on existing switch fuse base as per is 13703 pg 45 item 6.10 6.10.1 up to 63 amps, 349. supplying and fixing hrc fuse link on existing switch fuse base as per is 13703 pg 45 item 6.10 6.10.2 100 amps, 350. supplying and fixing hrc fuse link on existing switch fuse base as per is 13703 pg 45 item 6.10 6.10.3 up to 125 amps, 351. supplying and fixing hrc fuse link on existing switch fuse base as per is 13703 pg 45 item 6.10 6.10.4 200 amps, 352. supplying and fixing hrc fuse link on existing switch fuse base as per is 13703 pg 45 item 6.10 6.10.5 250 800 amps, 353. supplying push botton operated direct on line starters with an antiweld silver cadmium oxide contactor with replaceable fixed and movim=ng contacts and bimetallic thermal overload relay help in anticorrosion trated sheet steel or iron cld enclosure and fixing the same to suitable capacity wires for 400/440 volts 3 phase motor/ single phase motor up to 5 hp pg 44 item 6.1, 354. supplying fully automatic star –delta starter unit push button type suitable with suitable wires, 3 contactors, one adjustable thermal timer mounted on a common base plate held in steel enclosure for use on 400/440 volts 3 phase and wired after fixing to the existing wooden board for motor pg 44 item 6.2 6.2.1 up to 12.5 hp, 355. fixing halogen / metal halide /led flood lightiings fitted over the existing poles/ wall ceiling including clamps , bolts , nuts and wiring using suitable capacity wires pg 108 item 17.5, 356. fixing charges of post top/ gate/ garden fitting / led on the the existing ci?gi or any other pipe using required size of reducer wiring using suitable wires pg 108 item 17.6, 357. supplying and fixing of 150 watts led street lights with isi/ce cofirmed, 358. supplying and fixing of 200 watts flood lights with isi/ce confirmed., 359. supply and fixing of 4 pole power contactor with no/nc contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with ac 3 rating and as per is 13947. 100 125amps, 360. supplying and fixing electro mechanical timer (without contactor) using necessary bolts, nuts and washers etc. group ‘a’ (pwd ele sr of 2007 08) make : l & t, 361. supplying and fixing angle iron frame work fabricated out of m.s angle iron… and m.s. flat… with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. 40x40x6mm, 362. supplying and fixing hylum brand hand plastic sheet 3mm thick with necessary nitches for fixing switches, regulators etc., and fixing on existing wood or metal box using n.f.screws, 363. led street light. supply of led streetlight with pressure die cast aluminum housing body with optimal heat sink for better thermal dissipation. diffuser with injection moulded & is made of polycarbonate material with high transmission index, delivering superior light output. rated life burning hrs. 50000 hr. @ lumen maintenance of 70%. cct > 5500k, ip 66 optical and electrical compartment & impact resistance of complete luminaire > ik08. power factor >0.9 with mains current should not be greater than 0.1a to 0.7a & surge protection min 4 kv along with over voltage/overload, short circuit/ miswiring protection. compatible for pole mounting with outer dia of 40mm to 50mm. universal voltage driver to operate wide voltage range from 100v to 270v 50/60hz application. over load & short circuit protection ensures reliable operation in s ite of problem in output side. compliance to is 10322/iec 60598, lm 79 & lm 80 adherence with rohs. ul approved mcpcb. top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. led light fixture with ........w system power consumption. led efficiency>130lm/w at 1w & fixture efficiency >80lm/w with nominal cri 75+. housing with supplier word mark / name shall be engraved / embossing on the die cast housing / body part. . luminaire manufacturer should have in house facility accredited by nabl/cpri & any government certified agency & design & development facility certified by iso 9001:2008. warranty of 5 years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by led source manufacturer. suitable for a1/a2 roads as per is 1944 part i & part ii. 150 watts make:syska/cg, 364. fabricating, supplying and erecting swaged tubular pole of height …mtr having three sections, and providing two coats of red oxide paint and finished with two coats of enameled paint of approved quality and colour and m.s. base plate of suitable size welded at the bottom of the pole(as per is) and 40mm dia gi / flexible pvc pipe of 1 mtr length fitted to the heavy gauge polycarbonate control box including 5way connector of size 167x125x82mm for 7.5m pole/200x160x98mm for remaining length of pole with front opening cover, with locking arrangements and suitable capacity mcb / dp switch, the pole shall be erected in cement concrete work (1:2:4) including excavation and refilling of planting depth of the pole to the ground level and the coping cc shall be up to 0.6m above ground level as per is 2713 7. erection of heavy duty pole on footpath / median 5.13.1.1) 9mt (5mt hb,165.1mm dia 4.85mm thick x2m hm, 139.7mm dia 4.50mm thick x 2m ht,114.3mm dia 3.65mm thick) as per is 410 sp 32 pg 34 item 5.13.1.1, 365. supplying and fixing telescopic m.s. bracket fabricated by using 0.5m length 4” dia telescopic m. s. pipe, with 2” dia 1.5m long m. s. bracket and are welded with suitable angle, using 6mm thick m. s. sheet, grip bolts & nuts, as required, suitable for 9 to 12 mtrs. m. s. tubular pole, with necessary two coats of painting, with all other accessories. single bracket 1.5 mtr. length, 366. suspension clamp assembly including pole clamps with labour cost. bescom sr 2012 13, 367. piercing connector suitable for 16 sq mm to 95 sq mm ab cable streetlight connections. bescom 2012 13 (cds 40), 368. universal hook, bolts & nuts bescom 2012 13 (cds 40), 369. supply and installation / fixing / provision of outdoor type thermoplastic modular panel enclosure with transparent polycarbonate lid, shock proof, ip65 (weather proof), rust proof, dust proof, water proof, corrosion proof having internally embedded gasket on both lid and flap suitable to fix single phase / three phase energy meter in suitable base plate and having a provision for fuse / mcb cutout with suitable transparent hinged flap opening for operating mcb along with complete tamper proof sealing facility. 300mmx300mmx214mm, 370. supplying of led floodlight with .......w system power consumption pressure die cast aluminum housing with powder coating with ip 65 protection. 1, 200 275v voltage with electronic driver, pf>0.9, should meet ansi 2g vibration test, compliance to ul/ce with class i. system rating shall be 50k hrs. @ lumen maintenance of 70%, system efficacy > 80lm/w. over load & short circuit protection ensures reliable operation in spite of problem in output side. compliance to is 10322/iec 60598, lm 79 & lm 80 adherence with rohs. ul approved mcpcb. top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. led light fixture with ........w system power consumption. led efficiency>130lm/w at 1w & fixture efficiency >80lm/w with nominal cri >75. luminaire manufacturer should have in house facility accredited by nabl/cpri & any government certified agency & design & development facility certified by iso 9001:2008. housing with supplier word mark /name shall be engraved / embossing on the die cast housing/ body part. warranty of 5 years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by led manufacturer. led floodlight 200 watts, 371. fabricating, supplying and erecting swaged tubular pole of hight… mtr having three sections and providing two coats of red oxide paint and finished with two coats of enameled paint of approved quality and colour and m.s.base plate of suitable size welded at the bottom of the pole (as per is) and 40mm dia gl / flexible pvc pipe of mtr. length fitted to the heavy gauge polycarbonate control box including 5way connector of size 167x125x82mm for 7.5m pole /200x160x98 mm for remaining length of pole with front opeaning cover, with locking arrangements and suitable capacity mcb /dp switch. the pole shall be erected n cement concrete work (1:2:4) including excavation and refilling of planting depth of the pole to the ground level and the coping cc shall be up to 0.6m above ground level as per is 2713–7. i.erection of light duty pole on foot path a) 7.5 mt (4.5m hb 114.3mm dia 4.05mm thick x 1.5m hm 88.9mm dia 4.05mm thick x 1.5m ht, 76.1mm dia 3.25mm thick) as per is 410 sp 5 (base plate of size 300x300x6mm), 372. supplying and stringing of 1.1kv grade aerial bunched cable stranded & compacted aluminum phase conductor, and stranded messenger conductor with all aluminum alloy, phase conductor is insulated with xlpe compound, insulated messenger with specified is 14255:1995 & confirming to gtp of group a. 3 x 16 + 1 x 25 + 1 x 16 sq.mm, 373. wiring for lighting / power circuit using onr of pvc insulated 1100 volts grade stranded alluminium un sheathed wire single core cable in open or concealed system of wiring as per is 694 pg 12 item 2.12 2.12. 1 4sq mm, 374. wiring for lighting / power circuit using onr of pvc insulated 1100 volts grade stranded alluminium un sheathed wire single core cable in open or concealed system of wiring as per is 694 pg 12 item 2.12 2.12. 3 10sq mm, 375. supplying and drawing 3 core flat pvc sheathed submersible pump cable manufactured with electrolytic grade copper as per is 694:1990 & conforming to gtp of group –a pg 12 item 2.10 2.10.2 3 core x2.5 sqmm, 376. supplying and drawing 3 core flat pvc sheathed submersible pump cable manufactured with electrolytic grade copper as per is 694:1990 & conforming to gtp of group –a pg 12 item 2.10 2.10.3 3 core x4 sqmm, 377. supplying and drawing 3 core flat pvc sheathed submersible pump cable manufactured with electrolytic grade copper as per is 694:1990 & conforming to gtp of group –a pg 12 item 2.10 2.10.4 3 core x6 sqmm, 378. supplying 4 mm thick white plastic plate and covering for junction boxes of size .. mm conduit using necessary machine screws pg 17 item 3.11 3.11.1 80mm, 379. supplying 4 mm thick white plastic plate and covering for junction boxes of size .. mm conduit using necessary machine screws pg 17 item 3.11 3.11.2 110mm, 380. supplying .. way plastic gang box and fixing using necessary wooden / rawl / phill plugs and screws pg 17 item 3.13 3.13.1 1 way gang box, 381. supplying .. way plastic gang box and fixing using necessary wooden / rawl / phill plugs and screws pg 17 item 3.13 3.13.2 2 to 4 way gang box, 382. supplying .. way plastic gang box and fixing using necessary wooden / rawl / phill plugs and screws pg 17 item 3.13 3.13.3 6 to 10 way gang box, 383. supplying .. way plastic gang box and fixing using necessary wooden / rawl / phill plugs and screws 12to 16 way gang box, 384. supplying and fixing of metal clad industrial plugs pg 17 item 3.14 3.14.2 20 amps 2pole + earth 250 volts plug, 385. supplying and fixing of metal clad industrial sockets pg 17 item 3.14 3.14.6 20 amps 2pole + earth 250 volts socket, 386. supplying and fixing of metal clad industrial plug pg 17 item 3.14 3.14.4 30 amps 3pole + earth 440 volts plug, 387. supplying and fixing of metal clad industrial plug pg 17 item 3.14 3.14.8 30 amps 3pole + earth 440 volts socket tools and plant, 388. supplying of multimeter electro machinical type bescom sr 18 19 sl no 502 item code 62.03( clip on mtere), 389. supplying of multimeter electronic type bescom sr 18 19 sl no 501 item code 62.02, 390. supplying of portable drilling machine bescom sr 18 19 sl no505 item code 62.06, 391. supplying of megger 500 volts bescom sr 18 19 sl no:506 item code62.07, 392. supplying of megger 2.5 kv to 5 kv volts bescom sr 18 19 sl no:507 item code62.08, 393. supplying of silica gel bescom sr 18 18 sl no:510 item code 62.09, 394. supplying of ring spanners bescom sr18 19 sl no:511 item code 62.12, 395. supplying of tube spanners bescom sr18 19 sl no:512 item code 62.13, 396. supplying of pipe wrench 24 inches size bescom sr18 19 sl no:513 item code 62.14, 397. supplying of pipe wrench 18 inches size bescom sr18 19 sl no:513 item code 62.15, 398. supplying of double end spanners bescom sr:18 19 sl no:515 item code 62.16, 399. supplying of hack saw frame bescom sr 18 19 sl no:516 item code62.17, 400. supplying of hand torch 3 celled bescom sr 18 19 sl no:518 item code62.19, 401. supplying of rechargeble led hand torch bescom sr 18 19 sl no:519 item code62.20, 402. supplying of insulated cutting fliers12 inches size bescom sr 18 19 sl no:520 item code62.21, 403. supplying of insulated cutting fliers 8 inches size bescom sr 18 19 sl no:521 item code62.22, 404. supplying of live line tester (ht) bescom sr 18 19 sl no:522 item code62.23, 405. supplying of live line tester (lt) bescom sr 18 19 sl no:523 item code62.24, 406. supplying of screw driver 18 inches size bescom sr 18 19 sl no:525 item code62.26, 407. supplying of screw driver 18 inches size bescom sr 18 19 sl no:526 item code62.27, 408. supplying of 8 inch screwer bescom sr 18 19 sl no:527 item code62.28, 409. supplying of hammer 8 lbs bescom sr 18 19 sl no:528 item code62.29, 410. supplying of hammer 2 lbs bescom sr 18 19 sl no:529 item code62.30, 411. supplying of allen keys bescom sr 18 19 sl no:530 item code62.31, 412. supplying of adjustable screw spanner 8 inches bescom sr 18 19 sl no:531 item code62.32, 413. supplying of adjustable screw spanner 12inches bescom sr 18 19 sl no:532 item code62.33, 414. supplying of box spanners bescom sr 18 19 sl no:533 item code 62.34, 415. supplying of hand operated crimping tool 25 sqmm to400 sqmm bescom sr 18 19 sl no:554 item code62.55, 416. supplying of ladder frp bescom sr 18 19 sl no:554 item code62.55, 417. supplying of men at works sign board bescom sr 18 19 sl no:566 item code62.67, 418. supplying of insulated gos operated handle /rod for redesigned & modified bescom sr 18 19 sl no:569 item code62.70, 419. supplying route and joing indicating slab with ms anchor roodbescom sr 18 19 sl no:588 item code63.19, 420. supplying of black cambric tape 25mm wide 10mmm thick and in rolls of 50 mtrs bescom sr 18 19 sl no:589 item code63.20, 421. supplying of yeliow cambric tape 25mm wide 10mmm thick and in rolls of 50 mtrs bescom sr 18 19 sl no:590 item code63.21, 422. supplying of cotton waste bescom sr 18 19 sl no:597 item code63.28, 423. supplying of pvc insulation tape 19mm wide and in rolls of 10 mtrs bescom sr 18 19 sl no:591 item code63.22, 424. supplying of hdpe flexible poly barricade tape of 50microns bescom sr 18 19 item code 62.66, 425. supplying of spike buster with 5 mtr 1.5 sqmm 3 core cable, 426. supplying of halogen lamps 24 volts 50 watts for spot light, 427. supplying of patient examination spot light with incandascen lamp (complete set, 428. supplying of patient examination spot light with led bulb 22/36 watts, 429. supplying of lcd projector lamp for epson make projector, 430. supplying of lcd projector remote controller, 431. supplying of vga cable for lcd projector 15 mtrs in length with terminal connector of about 2 mtrs separately, 432. supplying and drawing hdmi cable for lcd projectors 15 mtrs in length, 433. supplying and installation of smf batteries 65 ah foron line 60 kva ups, 434. supplying of 100 ah smf batteries for 80 kva on line ups, 435. supplying of 26 ah batteries for 5 to 6 kva on line ups, 436. supplying and installation of generator set batteries o180 ah exide express with a warranty for 2 years on exchange basis including to and fro charges and labour charges, 437. supplying and installation of generator set batteries 150 ah exide express with a warranty for 2 years on exchange basis including to and fro charges and labour charges, 438. supplying and installation of generator set batteries 130 ah exide express with a warranty for 2 years on exchange basis including to and fro charges and labour charges, 439. supplying and fixing of battery charger for dg sets 24 volt, 440. supplying and fixing of battery charger for dg sets 12 volt overhauling of acb, greasing etc.. including all labour charges, 441. supply installation testing and commissioning of 1000 kva 11kv/433v 3 phase 50 hz delta star dyn11 outdoor natually cooled oil immersed copper double wound transformer conforming to is 1180 1180 3 level contained in mild steel radiator cooled tank with first fill of oil as per is 335 with on load tap changer from plus5% to 15% in steps of 2.5% remote tap changes panel with avr class f insulation rating and diagram plate earthing terminals 2 nosliffting lugs air release hole with plugdehydrating silica gel breatherprismatic oil level guageoil conservator with drain plugthermometer pocketjacking lugsbottom drain cum filter valvetop filter valve4 nos bidirectional rollerspressure relief devicemarshalling box [wherever applicable]100 mm oti/ 150 mm oti with alarm & tripwti with alarm and trip buchholz relay with alarm and tripshut off valves for buchholz relaymagnetic oil level guageradiators fixed / detachable with ht & lt cable end boxes / provison for lv bus duct type the transformer shall have suitable enclosure for providing neutral ct on earthed star point with connector for connection to ref relay provided in main panel all routing test as per is shall be conducted on the transformer the transformer enclosure shall have suitably designed louvers for air circulation & efficient cooling required danger boards signages lettering etc the enclosure shall be epoxy powder coated the transformer shall be subjected to all routine tests as per is/iec standards type test certificate shall be submitted as per ec bc norms etc., complete with all lead & lift, as per specifications and as per directions of the engineer in charge of the work including supplying and drawing lt ug cable 400 sqmm 150 mtrs, copper bus bar for 2000 amps , and lt feeder box comprising 200 amps acbsupplying and fixing and outgoings 800 amps acb 2no,s ,400 amps mccb 4 no,s with necessary earthing pits 8 no,s with copper plate earthing including construction of earth chambers, truss roofing for the out door panel and complete all civil works for bedding platform and out door lt panel as per the specifications and as per the directions of the engineer in charge of the works make :kirloskar/ volt amp/equivalent as approved by bescom, 442. supplying , errection , testing and commissioning of 500 kva capacity copper wound distribution transformere 11kv/433 volts with oltc bee star rated with ht and lt end boxes including all standard accessories make: kirloskar, 443. fixing all types and all capacities of fluorescent /false ceiling / spot light /cfl/led fittings indoor on the wall/ceiling /rafters/girders using 23/0.0076” twin twisted pvc insulated wires , required no,s of round blocks and clamps pg 108 item 17.7 17.7.1 on wall/ceiling/rafters/girders, 444. releasing the existing fan checking , testing and installation at the new place pg 104 item 16.9, 445. releasing the existing ftl fitting all capacities , checking , testing and installing at new place pg 105 item 16.12, 446. supplying of 9 volt batteries duracell, 447. supplying of 48 ah smf batteries for 2 kva on –line ups, 448. supplying of 1.5 volts aa batteries, 449. supplying of “aaa” 1.5 volt batteries, 450. supplying , errection , testing and commissioning of voltage stabilizers suitable for 170 volts to 270 volts in put and load variation from no –load to full load with over load protection , spike suppression , operating at 0 degree to 40 degree ranges etc.. complete pg 88 item 12 12..1.2 4 kva capacity, 451. supplying , errection , testing and commissioning of voltage stabilizers suitable for 170 volts to 270 volts in put and load variation from no –load to full load with over load protection , spike suppression , operating at 0 degree to 40 degree ranges etc.. complete pg 88 item 12 12..1.23 5 kva capacity, 452. supplying of 1/2 inch pop screws, 453. supplying of 1 inch pop screws, 454. supplying of 1 1/2 inch pop screws, 455. supplying of 1/2 inch alluminium screws, 456. supplying of 1 inch alluminium screws, 457. supplying of 1 1/2 inch alluminium screws, 458. supplying of 1/2 inch wood screws, 459. supplying of 1 inch wood screws, 460. supplying of 1 1/2 inch wood screws, 461. supplying of 8 mm ms blots with 2 inch length along with washers, 462. supplying of 10 mm ms bolts with 2 inch in length along with washers, 463. supplying of 12mm ms bolts with 2 inch in length along with washers, 464. supplying of 8mm, 1 1/2 inch in length ss nuts and bolts, 465. supplying of 10mm, 1 1/2 inch in length ss nuts and bolts, 466. supplying of 20mm, 1 1/2 inch in length ss nuts and bolts, 467. supplying of 20mm, 2 inch in length ss nuts and bolts, 468. supplying of wooden guttas, 469. supplying of iron connector for electric stoves, 470. supplying of gun bolts for electric stoves, 471. supplying of 2 kw coil for electric stoves ( round type) 6 inches, 472. supplying of 2 kw coil for electric stoves ( round type) 7inches, 473. supplying of 2 kw electrical stoves, 474. supplying of 15 feet ladder aluminium industrial type make:bathla, 475. supplying of 6 feet ladder aluminium industrial type make:bathla, 476. supplying of wall support ladder with flat step 20 feet industrial type, 477. providing human resource including electricians on shift basis, 478. supplying of 1 kvc on line ups with 30 minutes, 479. supplying on line ups 2 kva with 30 minutes back up, 480. supplying of 3 pin 6 amps top``, 481. supplying of 16 amps 3 pin top, 482. supplying and fixing of 6 amps 3 pin top, 483. supplying and fixing of 16 amps 3 pin top, 484. supplying of lcd projector having aspect ratio16:10, display resolution 1080p full hd, horizontal and vertical resolution 1200 pixels, noise level 37db, audio wattge ,2 watts and wattage 298watts total usb ports:1 no( hdmi) and 1 no vga port, white and colour light output:3400 lumens, composite video usb2.0 as hard ware interface, along with ceiling mounting bracket kit, 10 mtrs of vga cable and 10 mtrs of hdmi cable and screen size :300 inhes, 485. supplying and fixing of lcd projector screen 5”x7”, 486. supplying of wired mic, 487. supplying of uhf receiver for audio system, 488. supplying and fixing of cordless mic for audio system, ...

South Western Railway - Karnataka

23163099 supply of retro fitment type 5 watts led lamps, retro fitment type 5 watts led lamps with in built led driver and with ip 65 protection as per iec 60529. operating voltage range 90 v 140 v ac/dc, confirming to rdso spec no. rdso/pe/spec/ tl/0091 2016 (rev 1). suitable for the existing edison screw type holder in place of 25 watts incandescent lamp in tl & ac coaches. specn: rdso spec no. rdso/pe/spec/ tl/0091 2016 [rev.1]...

Mysore Palace Board - Karnataka

22441837 supply of 15 watts 250 volts grade brass cap incandescent lamps suitable for ferry land base screw type holders to mysore palace, mysore...

South Western Railway - Karnataka

22247729 supply of 4 watts led lamp to be retr, supply of 4 watts led lamp to be retro fitment in existing edision screw type holder in place of 15/25 watts incandescent lamp in tl coaches operating voltage range 90v to 140v ac/dc. confirming to rdso/pe/spec/tl0091 2016 (rev 1) make: led osram, nichia, lumi, ads, samsung, syska, arunya (aces)...

Department Of Training - Karnataka

21644706 supply of hand tools: 01 punch centre 02 neon tester 03 steel rule graduated both in metric and english unit 04 hand vice 05 table vice 06 hacksaw frame ( with blade ) 07 gauge, wire imperial stainless steel marked in swg & mm 08 portable electric drill machine 09 crimping tool 10 wire stripper adjustable length 11 hammer, ball peen with handle 12 scriber ( knurled centre position ) 13 allen key 14 scissors blade 15 electrical loads: set of incandescent lamp, tube light, cfl, led light, heater and geyser. 16 torque wrench 17 pipe cutter to cut pipes. 18 pipe cutter to cut pipes 19 try square 20 multi meter ( analog ) 21 load bank ( variable ) 22 wire cutter and stripper 23 earth plate 24 earth electrode 25 out side micrometer 26 tap set 27 trolley for transportation of batteries 28 die for threading...

Mysore Palace Board - Karnataka

21161025 supply of 15 watts 250 volts grade brass cap incandescent lamps suitable for ferry land base screw type holders to mysore palace, mysore=> open...

Department Of Training - Karnataka

20284773 supply of tools and equipment=> open tender: 1.01 measuring steel tape 5 meter 1.02 combination plier insulated 200 mm 1.03 screw driver insulated 4mm x 150 mm, diamond head 1.04 screw driver insulated 6mm x 150 mm 1.05 electrician screw driver thin stem insulated handle 4mm x 100 mm 1.06 heavy duty screw driver insulated 5mm x 200 mm 1.07 electrician screw driver thin stem insulated handle 4mm x 250 mm 1.08 punch centre 9mm x 150 mm 1.09 knife double bladed electrician 100 mm 1.1 neon tester 500 v 1.11 steel rule graduated both in metric and english unit 300 mm with precision of 1/4th mm 1.12 hammer, cross peen with handle 250 grams 1.13 electrical symbol and accessories charts 1.14 pipe vice cast iron with hardened jaw open type 1.15 hand vice 50 mm jaw 1.16 table vice 100 mm jaw 1.17 hacksaw frame (with blade) adjustable 300 mm fixed 150 mm 1.18 file flat 200 mm 2nd cut with handle 1.19 file half round 200 mm 2nd cut with handle 1.2 file round 200 mm 2nd cut with handle 1.21 pliers long nose insulated 150 mm 1.22 pliers flat nose insulated 200 mm 1.23 pliers, round nose insulated 100 mm 1.24 d.e. metric spanner double ended 6 32 mm 1.25 gauge, wire imperial stainlees steel marked in swg & mm wire gauge metric 1.26 portable electric drill machine 0 12 mm capacity 750w, 240v with chuck and key 1.27 crimping tool 1.5 sq mm to 16 sq mm 16 sq mm to 95 sq mm 1.28 pliers side cutting 150 mm 1.29 wire stripper adjustable length 1.3 hammer, ball peen with handle 150 gm 1.31 scriber (knurled centre position ) 1.32 tool kit box/bag portable 1.33 allen key 1.34 scissors blade 150 mm 1.35 electrical loads: set of incandescent lamp, tube light, cfl, led light, heater and geyser all loads to work on 230 v 50 hz ac 1.36 torque wrench 8n m to 15n m 1.37 pipe cutter to cut pipes upto 5 cm. dia 1.38 pipe cutter to cut pipes above 5 cm dia 1.39 try square 150 mm blade...

South Western Railway - Karnataka

19888043 tender for retro fitment type 5 watts led lampsitem list : (1) retro fitment type 5 watts led lamps with in built led driver and with ip 65 protection as per iec 60529. operating voltage range 90 v 140 v ac/dc, confirming to rdso spec no. rdso/pe/spec/ tl/0091 2016 (rev 1). suitable for the existing edison screw type holder in place of 25 watts incandescent lamp in tl &ac coaches....

South Western Railway - Karnataka

18631538 tender for retro fitment type 5 watts : item list (1) retro fitment type 5 watts led lamps with in built led driver and with ip 65 protection as per iec 60529. operating voltage range 90 v 140 v ac/dc, confirming to rdso spec no. rdso/pe/spec/ tl/0091 2016 (rev 1). suitable for the existing edison screw type holder in place of 25 watts incandescent lamp in tl &ac coaches....

South Western Railway - Karnataka

18474693 tender for retro fitment type 5 watts led lamps with in built led driver and with ip 65 protection as per iec 60529. operating voltage range 90 v 140 v ac/dc, confirming to rdso spec no. rdso/pe/spec/ tl/0091 2016 (rev 1). suitable for the existing edison screw type holder in place of 25 watts incandescent lamp in tl &ac coaches....

South Western Railway - Karnataka

18474609 tender for retro fitment type 5 watts led lamps with in built led driver and with ip 65 protection as per iec 60529. operating voltage range 90 v 140 v ac/dc, confirming to rdso spec no. rdso/pe/spec/ tl/0091 2016 (rev 1). suitable for the existing edison screw type holder in place of 25 watts incandescent lamp in tl &ac coaches....

Medical Education Department - Karnataka

18298164 supply of electrical items to kci 77 supply of wall mounting fans 300mm sweep 78 supply of pedestal fans 300 mm sweep 79 supplying of oval shaped heating element for raclodaltro geysers 80 supplying of trikona heating element for geysers 81 supplying of round type heating element for geysers 82 thermostat for racold make geysers 83 supply of incandescent lamps 100 watts 84 supply of insulation tapes 85 supply of silicord wire 1 sqmm...

South Western Railway - Karnataka

17868533 tender for 4 watts led lamp to be retro fitment in existing edison screw type holderin place of 15/25 watts incandescent lamp in tl coaches operating voltage range 90volts 140 volts ac/dc make: philips or wipro or nichia or lumi or samsung confirmingto rdso/pe/spec/tl0091 2016( rev 1) warranty: minimum 5 years...

Medical Education Department - Karnataka

17828608 supply of electrical items 78 supply of pedestal fans 300 mm sweep 79 supplying of oval shaped heating element for raclodaltro geysers 80 supplying of trikona heating element for geysers 81 supplying of round type heating element for geysers 82 thermostat for racold make geysers 83 supply of incandescent lamps 100 watts 84 supply of insulation tapes 85 supply of silicord wire 1 sqmm...

Indian Navy - Karnataka

17193981 procurement of mcms 1.66 led lamp ( red ) 12v dc 1.67 me speed meter 1.68 terminals with inbuilt relay 1.69 mcb 20a dp 1.7 mccb 50a 1.71 1 c / o relays 1.72 5 / 10 dia, led ( red / yellow / white / green ) 1.73 24v dc buzzer 1.74 processor 1.75 40a, 1 way mcb, 2p 1.76 50a, 1 way mcb, 2p 1.77 2a, 1 way mcb, 2p 1.78 6a, 1 way mcb, 2p 1.79 mcb 3 pole 10a 1.8 undervoltage relay uvtd1 3 phase 1.81 illuminated pb, red 1.82 power terminals suitable upto 4 sq.mm wire 1.83 15 pin pcb ao 1.84 generator protection relay 1.85 illuminated pb, green 1.86 kw meter 3ph, 3wire, 2element415vac, range25 0 200kwsize96x96 1.87 frequency meter 415vac, 50hz, range45 50 55hz, size96x96 1.88 tp mcb, 240v ac, 50hz, 4a 1.89 magazine light fitting ( 60w ) 1.9 ammeter 1.91 electrical operating mechanism 1.92 semiconductor fuse ( gsa 100a ) 1.93 power factor 3ph, 3 wire, 1element415vac, size:96x96 1.94 electrical operating mechanism dn2 mccb 1.95 60w incandescent lamp 1.96 motorised potentiometer ( voltage ) 1.97 motorised potentiomed er ( frequency ) 1.98 sub miniature fuse 1a 250 v 1.99 mn0 aux.contactor ( 4no with 240v ac coil ) ...

Medical Education Department - Karnataka

17150761 supply of electrical items : 6 9 kcle69 supply of mcb 63 amps tpn 7 0 kcle70 supply of heating element 3kw 7 1 kcle71 supply of thermostat 20 amps capacity 25 inch 7 2 kcle72 supply of hpmh / hpsv lamps 250 watts 7 3 kcle73 supply of box type flourescent fitting with electronic ballast 1x2’14 watts 7 4 kcle74 supply of box type flourescent fitting electronic ballast 2x4’28 watts 7 5 kcle75 supply of 4 sqmm teflon wire 7 6 kcle76 supplying of ceiling fans 48” sweep ( 1200mm ) double ball bearing 7 7 kcle77 supply of wall mounting fans 300mm sweep 7 8 kcle78 supply of pedestal fans 300 mm sweep 7 9 kcle79 supplying of oval shaped heating element for raclod altro geysers 8 0 kcle80 supplying of trikona heating element for geysers 8 1 kcle81 supplying of round type heating element for geysers 8 2 kcle82 thermostat for racold make geysers 8 3 kcle83 supply of incandescent lamps 100 watts 8 4 kcle84 supply of insulation tapes 8 5 kcle85 supply of silicord wire 1 sqmm...

Mysore Palace Board - Karnataka

16859426 supply of 15 watts 250 volts grade brass cap incandescent lamps suitable for ferry land base screw type holders to mysore palace, mysore...

National Mineral Development Corporation Limited - Karnataka

16738054 supply of carbon brushes, mcb s, cables, hrc fuses, pvc non adhesive tape and various electrical items 39 items: 1 50a 006015 carbon brush for kec motor, motor frame kdw400 / kcw 355, size 32x38x22, m145e 2 50a 006110 carbon brush for kec motor, motor frame: sdx450fspl, size 62x50x25, m145e 3 50a 055512 carbon brush for, size 32x25x48 4 50a 057518 carbon brush for, size 30x20x60 5 50b 004014 carbon brush for ngef motor, motor frame: avmw450, size 20x40x40 6 54f 025411 mcb 15a sp / 16 a makes: siemens / abb / schneider / legrand / indoasian 7 54f 025811 mcb 30 a dp msd, makes: siemens / abb / schneider / legrand / indoasian 8 55b 000112 2 core 2.5 sq. mm pvc copper cable, with isi mark make: insucon / cci / finolex / havells / polycab / sark / v guard / centurion / gloster 9 55c 004614 aluminium conductor pvc insulated sheath 2x1.5 sq. mm, with isi mark make: insucon / cci / finolex / havells / polycab / sark / v guard / centurion / gloster 10 55c 007213 aluminium service wire, 2c x 2.5 sq mm, aluminium conductor, pvc insulated, 1.1kv grade, as per latest is standards. with isi mark make: insucon / cci / finolex / havells / polycab / sark / v guard / centurion / gloster 11 55e 001415 1100v grade, single core x 2.5 sq.mm pvc / xlpe insulated, multistrand copper conductor pvc sheathed, flexible cable with individual core colour confirming to latest is specifications. make: insucon / cci / finolex / havells / polycab / sark / v guard / centurion / gloster 12 55g 000212 15a combination switch with socket make: anchor / cona / havells / maru / poineer / star 13 55g 025114 ignitor for son 35 watts ignitor suitable for son 35 w luminaire makes: philips / bajaj / ge / osram / cg / wipro / halonix 14 55g 026117 ignitor for lamp son 150 w srp 21 ignitors suitable for son 150 w luminaire makes: philips / bajaj / ge / osram / cg / wipro / halonix 15 halogen lamp 1000w, 250v 16 500 w lamp 250v screw type incandescent lamp, 500 watts, 250 volts, screw type e41...

South Western Railway - Karnataka

16726771 tender for retro fitment type 5 watts led lamps with in built led driver and with ip 65 protection as per iec 60529. operating voltage range 90 v 140 v ac/dc, confirming to rdso spec no. rdso/pe/spec/ tl/0091 2016 (rev 1). suitable for the existing edison screw type holder in place of 25 watts incandescent lamp in tl &ac coaches....

National Mineral Development Corporation Limited - Karnataka

16710467 supply of electrical items carbon brush for kec motor, ,carbon brush for kec motor carbon brush ,aluminium conductor pvc insulated sheath 2x1.5 sq. mm, with isi mark ,1100v grade, single core x 2.5 sq.mm pvc/xlpe cable ,15a combination switch with socket ,ignitor for son 35 w ignitor suitable for son 35 w luminaire halogen lamp 1000w, 250v ,500 w lamp 250v screw type incandescent lamp, ,hpsv lamp 250w, 250v ,tube light holder ,metal halide lamp 250 watts ,h/l bulb halogen 12v 90/100w ,40 w copper ballast for fl tube ,70w copper ballast for son/ hpsv lamp ,5 amps flush type 3 pin socket ,plug for 20a socket, 250v ,5a flush two way switch ,35w led street light unit ,pvc non adhesive tape 19mm 25 mtrs ,steel grip tape 18 mmx8 mtrs/ 7.5 mtrs ,anti tracking finishing varnish ,hrc fuse link type 3na1001 3na3812 7y ,125 amps hrc lv fuse link ,250 amps hrc lv fuse link....

South Western Railway - Karnataka

13124696 supply of 4 watt led lamp to be retrofit in existing edison screw type holder in place of 15/25 watt incandescent lamp in tl and ac coaches operating voltage range 90v to 140 v ac/dc.make: led,osram,nichia,lumilads and samsung confirming to rdso specification no.rdso/pe/spec/tl0091 2016 rev 1 ....

South Western Railway - Karnataka

12928027 supply of retro fitment type 5w led lamps in the existing edison screw type holder as per rdso spec no.rdso/pe/spec/tl/0091 2016 rev 1 for replacement of existing 25w incandescent lamp of screw type holder in tl and ac coaches.....

Military Engineer Service - Karnataka

3474011 repairs/replacement of internal electrification including replacement of incandescent lamp by ftl/cfl including replacement of chokes, side holders and connected items at dgqa md accn at guntha vihar and, diqa, dgi, naval mess, 2 para sf) area under ge north)bangalore...

Military Engineer Service - Karnataka

3473911 repairs/replacement of internal electrification including replacement of incandescent lamp by ftl/cfl including replacement of chokes, side holders and connected items at cqal, 106 inf bn, prtc, ml line, mi line area under ge north) bangalore...

Military Engineer Service - Karnataka

3473867 repairs/replacement of internal electrification including replacement of incandescent lamp by ftl/cfl including replacement of chokes, side holders and connected items at fmme,toc/poc, 32 key per qtr, assaye line,ntg/nlc and meg offrs mess area under ge n) bangalore...

Military Engineer Service - Karnataka

3473813 repairs/replacement of internal electrification including replacement of incandescent lamp by ftl/cfl including replacement of chokes, side holders and connected item in old tb iii, 16 bihar, admc, mandley line and choudhary line at meg ¢re under ge north)bangalore...